ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA 59 General partner Elektrobau Mulfingen GmbH Headquarters Mulfingen County court Stuttgart HRB 59 Nominal data Type Motor ME5-BF Phase ~ ~ Nominal voltage VAC Frequency Hz 5 6 Type of data definition fa fa Valid for approval / standard CE CE Speed min - 8 Power input W 7 Current draw A.. Motor capacitor µf Capacitor voltage VDB Capacitor standard P (CE) P (CE) Min. back pressure Pa Min. ambient temperature C -5-5 Max. ambient temperature C 5 6 Starting current A.. ml = max. load me = max. efficiency fa = running at free air cs = customer specs cu = customer unit Subject to alterations Item no. 77-5-998 Revision 68588 Release --8 Page / 5
Technical features Mass Size Surface of rotor Material of impeller Number of blades 7 Direction of rotation Type of protection Insulation class Max. permissible ambient motor temp. (transp./ storage) Min. permissible ambient motor temp. (transp./storage) Mounting position Condensate discharge holes Operation mode Motor bearing Touch current acc. IEC 699 (measuring network Fig., TN system) Motor protection Cable exit Protection class Product conforming to standard Approval.7 kg mm Partially cast in aluminium PA plastic 6, fiberglass-reinforced Clockwise, seen on rotor IP ; Depending on installation and position "B" + 8 C - C Any None S Ball bearing <.75 ma Thermal overload protector (TOP) wired internally Variable I (if protective earth is connected by customer) CE CCC; GOST Item no. 77-5-998 Revision 68588 Release --8 Page / 5
Product drawing Connection line PVC, x brass lead tips crimped Accessory part: Inlet nozzle 9566--, not included in the standard scope of delivery Screw depth max. 5 mm Connection screen U blue Z brown U black PE green/yellow Item no. 77-5-998 Revision 68588 Release --8 Page / 5
Charts: Air flow 5 Hz Druck p f s[pa]für Rho=,kg/m^ 9 85 8 75 7 65 6 55 5 5 5 5 5 5 95 9 85 8 75 7 65 6 55 5 5 5 5 5 5 6 8 6 8 qv[cfm] 6 8 qv[m^/h] 6 6 8 8,76,7,7,7,68,66,6,6,6,58,56,5,5,5,8,6,,,,8,6,,,,8,6,,,,8,6,,,,8,6,, pfs_e[in HO] Measurement: LU-586 Air performance measured as per ISO 58 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 7 / LpA measured with m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. Measured values U V f Hz 5 5 5 5 n min - 8 7 7 7 P e W 5 6 6 I A.... qv m /h 9 5 75 5 p fs Pa 5 U = Supply voltage f = Frequency n = Speed P e = Power input I = Current draw qv = Air flow p fs = Pressure increase Item no. 77-5-998 Revision 68588 Release --8 Page / 5
Charts: Air flow 6 Hz Druck p f s[pa]für Rho=,kg/m^ 7 6 8 qv[cfm] 6 8 6,5 5 9 8 7 6 5,95,9,85,8,75,7,65,6,55,5,5 pfs_e[in HO] Measurement: LU-587 Air performance measured as per ISO 58 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 7 / LpA measured with m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed., 9 8 7 6,5,,5 5, 6 8 6 8 qv[m^/h] 6 8 6,5,,5 8 Measured values U V f Hz 6 6 6 6 n min - 5 5 5 P e W 7 9 9 9 I A.... qv m /h 8 p fs Pa 6 8 U = Supply voltage f = Frequency n = Speed P e = Power input I = Current draw qv = Air flow p fs = Pressure increase Item no. 77-5-998 Revision 68588 Release --8 Page 5 / 5