P-Channel Enhancement Mode MOSFET Features Pin Description -2V/-4, =48mΩ(typ.) @ V GS =-4.5V =85mΩ(typ.) @ V GS =-2.5V =135mΩ(typ.) @ V GS =-1.8V Super High Dense Cell Design Reliable and Rugged Lead Free and Green Devices vailable (RoHS Compliant) D D S D D G Top View of SOT-23-6 (1,2,5,6) D D D D pplications (3) G Power Management in Notebook Computer, Portable Equipment and Battery Powered Systems Ordering and Marking Information S (4) P-Channel MOSFET PM263 ssembly Material Handling Code Temperature Range Package Code Package Code C : SOT-23-6 Operating Junction Temperature Range C : -55 to 15 o C Handling Code TR : Tape & Reel ssembly Material G : Halogen and Lead Free Device PM263 C : M3X X - Date Code Note: NPEC lead-free products contain molding compounds/die attach materials and 1% matte tin plate termination finish; which are fully compliant with RoHS. NPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-2C for MSL classification at lead-free peak reflow temperature. NPEC defines Green to mean lead-free (RoHS compliant) and halogen free (Br or Cl does not exceed 9ppm by weight in homogeneous material and total of Br and Cl does not exceed 15ppm by weight). NPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. 1
bsolute Maximum Ratings (T = 25 C unless otherwise noted) Symbol Parameter Rating Unit V DSS Drain-Source Voltage -2 V GSS Gate-Source Voltage ±12 V I D * Continuous Drain Current -4 V GS =-4.5V I DM * 3µs Pulsed Drain Current -16 I S * Diode Continuous Forward Current -1.5 T J Maximum Junction Temperature 15 T STG Storage Temperature Range -55 to 15 C P D * Maximum Power Dissipation T =25 C 1.4 T =1 C.5 W R θj * Thermal Resistance-Junction to mbient 9 C/W Note : *Surface Mounted on 1in 2 pad area, t 5sec. Electrical Characteristics (T = 25 C unless otherwise noted) Symbol Parameter Test Conditions Unit Min. Typ. Max. STTIC CHRCTERISTICS BV DSS Drain-Source Breakdown Voltage V GS =V, I DS =-25µ -2 - - V I DSS V DS =-16V, V GS =V - - -1 Zero Gate Voltage Drain Current µ T J =85 C - - -3 V GS(th) Gate Threshold Voltage V DS =V GS, I DS =-25µ -.5 -.75-1 V I GSS Gate Leakage Current V GS =±1V, V DS =V - - ±1 µ V GS =-4.5V, I DS =-4-48 6 a a V SD Drain-Source On-State Resistance V GS =-2.5V, I DS =-2-85 115 mω V GS =-1.8V, I DS =-.5-135 25 Diode Forward Voltage I SD =-1.5, V GS =V - -.75-1.3 V GTE CHRGE CHRCTERISTICS b Q g Total Gate Charge - 6 8 Q gs Gate-Source Charge V DS =-1V, V GS =-4.5V, I DS =-4-1 - Gate-Drain Charge - 2.3 - Q gd nc 2
Electrical Characteristics (Cont.) (T = 25 C unless otherwise noted) Symbol Parameter Test Conditions DYNMIC CHRCTERISTICS b Min. Typ. Max. R G Gate Resistance V GS =V,V DS =V,F=1MHz - 1 - Ω C iss Input Capacitance V GS =V, - 6 - C oss Output Capacitance V DS =-1V, - 125 - Reverse Transfer Capacitance Frequency=1.MHz - 95 - C rss t d(on) Turn-on Delay Time - 8 15 T r Turn-on Rise Time V DD =-1V, R L =1Ω, - 14 26 I DS =-1, V GEN =-4.5V, t d(off) Turn-off Delay Time R - 28 51 G =6Ω Turn-off Fall Time - 42 77 T f t rr Reverse Recovery Time - 13 - ns I DS =-4, dl SD /dt=1/µs Reverse Recovery Charge - 5 - nc Q rr Note a : Pulse test ; pulse width 3µs, duty cycle 2%. Note b : Guaranteed by design, not subject to production testing. Unit pf ns 3
Typical Operating Characteristics Power Dissipation Drain Current 1.6 5. 1.4 4.5 P tot - Power (W) 1.2 1..8.6.4 -I D - Drain Current () 4. 3.5 3. 2.5 2. 1.5 1..2 T =25 o C. 2 4 6 8 1 12 14 16.5 T =25 o C,V G =-4.5V. 2 4 6 8 1 12 14 16 T J - Junction Temperature ( C) T J - Junction Temperature ( C) -I D - Drain Current () Safe Operation rea 5 1 3µs 1 1ms 1ms 1ms.1 1s DC T.1 =25 o C.1.1 1 1 1 -V DS - Drain - Source Voltage (V) Rds(on) Limit Normalized Transient Thermal Resistance 2 1.1.1 Thermal Transient Impedance.2.1.5.1 Single Pulse.2 Duty =.5 Mounted on 1in 2 pad R θj : 9 o C/W 1E-3 1E-4 1E-3.1.1 1 1 1 Square Wave Pulse Duration (sec) 4
Typical Operating Characteristics (Cont.) Output Characteristics Drain-Source On Resistance 16 2 14 V GS = -3-3.5,-4,-5,-6,-7,-8,-9,-1V 18 V GS =-1.8V -I D - Drain Current () 12 1 8 6 4-2.5V -2V - On - Resistance (mω) 16 14 12 1 8 6 4 V GS =-2.5V V GS =-4.5V 2-1.5V 2..5 1. 1.5 2. 2.5 3. -V DS - Drain - Source Voltage (V) 2 4 6 8 1 12 14 16 -I D - Drain Current () Drain-Source On Resistance Gate Threshold Voltage 1 9 I D =-4 1.8 1.6 I DS = -25µ - On - Resistance (mω) 8 7 6 5 4 3 Normalized Threshold Voltage 1.4 1.2 1..8.6.4.2 2 1 2 3 4 5 6 7 8 9 1. -5-25 25 5 75 1 125 15 -V GS - Gate - Source Voltage (V) T J - Junction Temperature ( C) 5
Typical Operating Characteristics (Cont.) Drain-Source On Resistance Source-Drain Diode Forward 1.8 1.6 V GS = -1V I DS = -4 2 1 Normalized On Resistance 1.4 1.2 1..8 -I S - Source Current () 1 T j =15 o C T j =25 o C.6 R ON @T j =25 o C: 48mΩ.4-5 -25 25 5 75 1 125 15.1..3.6.9 1.2 1.5 1.8 T J - Junction Temperature ( C) -V SD - Source - Drain Voltage (V) Capacitance Gate Charge 9 8 Frequency=1MHz 1 9 V DS = -1V I D = -4 C - Capacitance (pf) 7 6 5 4 3 2 1 Crss Coss Ciss -V GS - Gate - source Voltage (V) 8 7 6 5 4 3 2 1 4 8 12 16 2 2 4 6 8 1 12 -V DS - Drain - Source Voltage (V) Q G - Gate Charge (nc) 6
Package Information SOT-23-6 D e SEE VIEW 2.25 E1 E e1 b c 1 L GUGE PLNE SETING PLNE VIEW S Y M B O L 1 2 b c D E E1 e e1 L MIN...9.3.8.3 MILLIMETERS.95 BSC 1.9 BSC MX. 1.45.15 1.3.5.22 2.7 3.1 2.6 3. 1.4 1.8.6 SOT-23-6 MIN...35.12.3.16.12.55.12 INCHES.37 BSC.75 BSC MX..57.6.51.2.9.122.118.71.24 8 8 Note : 1. Follow JEDEC TO-178 B. 2. Dimension D and E1 do not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 1 mil per side. 7
Carrier Tape & Reel Dimensions OD P P2 P1 H E1 OD1 B T B W F K B SECTION - SECTION B-B d T1 pplication H T1 C d D W E1 F SOT-23-6 178. 2. 5 MIN. 8.4+2. -. 13.+.5 -.2 1.5 MIN. 2.2 MIN. 8..3 1.75.1 3.5.5 P P1 P2 D D1 T B K 4..1 4..1 2..5 Devices Per Unit 1.5+.1 -. 1. MIN..6+. -.4 3.2.2 3.1.2 1.5.2 (mm) Package Type Unit Quantity SOT-23-6 Tape & Reel 3 8
Taping Direction Information SOT-23-6 USER DIRECTION OF FEED X X X X X X X Reflow Condition (IR/Convection or VPR Reflow) T P Ramp-up tp Critical Zone T L to T P Temperature T L Tsmax Tsmin t L Ramp-down ts Preheat 25 t 25 C to Peak Time Reliability Test Program Test item Method Description SOLDERBILITY MIL-STD-883D-23 245 C, 5 sec HOLT MIL-STD-883D-15.7 1 Hrs Bias @125 C PCT JESD-22-B, 12 168 Hrs, 1%RH, 121 C TST MIL-STD-883D-111.9-65 C~15 C, 2 Cycles 9
Classification Reflow Profiles Profile Feature Sn-Pb Eutectic ssembly Pb-Free ssembly verage ramp-up rate (T L to T P) 3 C/second max. 3 C/second max. Preheat 1 C 15 C - Temperature Min (Tsmin) 15 C 2 C - Temperature Max (Tsmax) 6-12 seconds 6-18 seconds - Time (min to max) (ts) Time maintained above: - Temperature (T L) - Time (t L) 183 C 6-15 seconds 217 C 6-15 seconds Peak/Classification Temperature (Tp) See table 1 See table 2 Time within 5 C of actual Peak Temperature (tp) 1-3 seconds 2-4 seconds Ramp-down Rate 6 C/second max. 6 C/second max. Time 25 C to Peak Temperature 6 minutes max. 8 minutes max. Note: ll temperatures refer to topside of the package. Measured on the body surface. Table 1. SnPb Eutectic Process Package Peak Reflow Temperatures Package Thickness Volume mm 3 Table 2. Pb-free Process Package Classification Reflow Temperatures Package Thickness Volume mm 3 <35 <35 Volume mm 3 35-2 Volume mm 3 Volume mm 3 >2 <1.6 mm 26 + C* 26 + C* 26 + C* 1.6 mm 2.5 mm 26 + C* 25 + C* 245 + C* 2.5 mm 25 + C* 245 + C* 245 + C* *Tolerance: The device manufacturer/supplier shall assure process compatibility up to and including the stated classification temperature (this means Peak reflow temperature + C. For example 26 C+ C) at the rated MSL level. 35 <2.5 mm 24 +/-5 C 225 +/-5 C 2.5 mm 225 +/-5 C 225 +/-5 C Customer Service npec Electronics Corp. Head Office : No.6, Dusing 1st Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642 Fax : 886-3-56425 Taipei Branch : 2F, No. 11, Lane 218, Sec 2 Jhongsing Rd., Sindain City, Taipei County 23146, Taiwan Tel : 886-2-291-3838 Fax : 886-2-2917-3838 1