(A, 15A, A type) (3A, A type) High capacity SSR, both tab and screw terminals available RELAYS FEATURES 1. Two types of terminal shape: Plug-in terminal and Screw terminal (3 A, A is screw terminal types only). Flat type of SSR possible by aluminium printed circuit board 3. High dielectric strength of 1, V between input and output., V available for A, 15A, A devices.. Heat sink and DIN mounting rail and terminal cover are available as accessories APPLICATIONS 1. Molding machine (heater control). Temperature controlled bath (heater control) 3. Printing machine (heater control). Machine tool (motor control) Compliance with RoHS Directive ORDERING INFORMATION AQR Solid state Relay current A 15 A A 3 A A voltage 1: 75 to 15 V AC : 75 to V AC Terminal shape Nil: Plug-in terminal S: Screw terminal AQR Type Z: Zero-cross type (1, V) ZV: Zero-cross type (, V) Input voltage /6 V DC /18 V DC 18/8 V DC
TYPES 1. Tab terminal type Type current voltage Input voltage Zero-cross A 15 A A Standard packing: Carton pcs., Case: pcs. 75 to 15V AC 75 to V AC 75 to 15 V AC 75 to V AC 75 to 15 V AC 75 to V AC Standard (1,V AC) Reinforced (,V AC) to 6V DC AQRA1-Z/ to 18V DC AQRA1-Z/ 18 to 8V DC AQRA1-Z18/ to 6V DC AQRA-Z/ AQRA-ZV/ to 18V DC AQRA-Z/ AQRA-ZV/ 18 to 8V DC AQRA-Z18/ AQRA-ZV18/ to 6V DC AQR15A1-Z/ to 18V DC AQR15A1-Z/ 18 to 8V DC AQR15A1-Z18/ to 6V DC AQR15A-Z/ AQR15A-ZV/ to 18V DC AQR15A-Z/ AQR15A-ZV/ 18 to 8V DC AQR15A-Z18/ AQR15A-ZV18/ to 6V DC AQRA1-Z/ to 18V DC AQRA1-Z/ 18 to 8V DC AQRA1-Z18/ to 6V DC AQRA-Z/ AQRA-ZV/ to 18V DC AQRA-Z/ AQRA-ZV/ 18 to 8V DC AQRA-Z18/ AQRA-ZV18/. Screw-terminal type Type current voltage Input voltage Standard (1,V AC) Reinforced (,V AC) to 6V DC AQRA1-S-Z/ 75 to 15 V AC to 18V DC AQRA1-S-Z/ A 18 to 8V DC AQRA1-S-Z18/ to 6V DC AQRA-S-Z/ AQRA-S-ZV/ 75 to V AC to 18V DC AQRA-S-Z/ AQRA-S-ZV/ 18 to 8V DC AQRA-S-Z18/ AQRA-S-ZV18/ to 6V DC AQR15A1-S-Z/ 75 to 15 V AC to 18V DC AQR15A1-S-Z/ 15 A 18 to 8V DC AQR15A1-S-Z18/ to 6V DC AQR15A-S-Z/ AQR15A-S-ZV/ 75 to V AC to 18V DC AQR15A-S-Z/ AQR15A-S-ZV/ Zero-cross 18 to 8V DC AQR15A-S-Z18/ AQR15A-S-ZV18/ to 6V DC AQRA1-S-Z/ 75 to 15 V AC to 18V DC AQRA1-S-Z/ A 18 to 8V DC AQRA1-S-Z18/ to 6V DC AQRA-S-Z/ AQRA-S-ZV/ 75 to V AC to 18V DC AQRA-S-Z/ AQRA-S-ZV/ 18 to 8V DC AQRA-S-Z18/ AQRA-S-ZV18/ to 6V DC AQR3A-S-Z/ 3 A 75 to V AC to 18V DC AQR3A-S-Z/ 18 to 8V DC AQR3A-S-Z18/ to 6V DC AQRA-S-Z/ A 75 to V AC to 18V DC AQRA-S-Z/ 18 to 8V DC AQRA-S-Z18/ Standard packing: Carton pcs., Case: pcs.
SPECIFICATIONS 1. Ratings (at C 68 F, Input ripple: 1% or less) 1) A type Items Input ) 15 A type Items Input AQRA1-Z/ AQRA1-S-Z/ AQRA1-Z/ AQRA1-S-Z/ AQRA1-Z18/ AQRA1-S-Z18/ AQRA-Z/ AQRA-ZV/ AQRA-S-Z/ AQRA-S-ZV/ Notes: *1. Refer to REFERENCE DATA 3. Input current vs. input voltage. *. Refer to REFERENCE DATA 1. current vs. ambient temperature. *3. Refer to REFERENCE DATA. Non-repetitive surge current vs. carrying time. *. When the load current is less than the rated minimum load current, please refer to Cautions for Use of SSR. AQRA-Z/ AQRA-ZV/ AQRA-S-Z/ AQRA-S- ZV/ AQRA-Z18/ AQRA-ZV18/ AQRA-S-Z18/ AQRA-S- ZV18/ Input voltage to 6V DC to 18V DC 18 to 8V DC to 6V DC to 18V DC 18 to 8V DC Input impedance Approx..6 kω Approx..86 kω Approx. 1.36 kω Approx..6 kω Approx..86 kω Approx. 1.36 kω * 1 Drop-out voltage, min. 1 V Ta = Max. C Max. load current A* F voltage 75 to 15 V AC 75 to V AC Frequency 5 to 65 Hz Repetitive peak voltage V 6 V Non-repetitive surge current Max. OFF-state leakage current Max. ON-state voltage drop A* 3 In one cycle at 6 Hz.5 ma (when V AC applied) 5 ma (when V AC applied) at 6 Hz 1.6 V Min. load current ma* OFF-state dv/dt V/µs AQR15A1-Z/ AQR15A1-S-Z/ AQR15A1-Z/ AQR15A1-S-Z/ AQR15A1-Z18/ AQR15A1-S-Z18/ AQR15A-Z/ AQR15A-ZV/ AQR15A-S-Z/ AQR15A-S-ZV/ AQR15A-Z/ AQR15A-ZV/ AQR15A-S-Z/ AQR15A-S- ZV/ AQR15A-Z18/ AQR15A-ZV18/ AQR15A-S-Z18/ AQR15A-S- ZV18/ at max. carrying current Input voltage to 6V DC to 18V DC 18 to 8V DC to 6V DC to 18V DC 18 to 8V DC Input impedance Approx..6 kω Approx..86 kω Approx. 1.36 kω Approx..6 kω Approx..86 kω Approx. 1.36 kω * 1 Drop-out voltage, min. 1 V Ta = Max. C Max. load current 15 A* F voltage 75 to 15 V AC 75 to V AC Frequency 5 to 65 Hz Repetitive peak voltage V 6 V Non-repetitive surge current Max. OFF-state leakage current Max. ON-state voltage drop 1 A* 3 In one cycle at 6 Hz.5 ma (when V AC applied) 5 ma (when V AC applied) at 6 Hz 1.6 V Min. load current ma* OFF-state dv/dt V/µs at max. carrying current
3) A type Items Input AQRA1-Z/ AQRA1-S-Z/ AQRA1-Z/ AQRA1-S-Z/ AQRA1-Z18/ AQRA1-S-Z18/ AQRA-Z/ AQRA-ZV/ AQRA-S-Z/ AQRA-S-ZV/ Notes: *1. Refer to REFERENCE DATA 3. Input current vs. input voltage. *. Refer to REFERENCE DATA 1. current vs. ambient temperature. *3. Refer to REFERENCE DATA. Non-repetitive surge current vs. carrying time. *. When the load current is less than the rated minimum load current, please refer to Cautions for Use of SSR. AQRA-Z/ AQRA-ZV/ AQRA-S-Z/ AQRA-S- ZV/ AQRA-Z18/ AQRA-ZV18/ AQRA-S-Z18/ AQRA-S- ZV18/ Input voltage to 6V DC to 18V DC 18 to 8V DC to 6V DC to 18V DC 18 to 8V DC Input impedance Approx..6 kω Approx..86 kω Approx. 1.36 kω Approx..6 kω Approx..86 kω Approx. 1.36 kω * 1 Drop-out voltage, min. 1 V Ta = Max. C Max. load current A* F voltage 75 to 15 V AC 75 to V AC Frequency 5 to 65 Hz Repetitive peak voltage V 6 V Non-repetitive surge current Max. OFF-state leakage current Max. ON-state voltage drop A* 3 In one cycle at 6 Hz.5 ma (when V AC applied) 5 ma (when V AC applied) at 6 Hz 1.6 V Min. load current ma* OFF-state dv/dt V/µs at max. carrying current ) 3 A type and A type AQR3A-S-Z/ AQR3A-S-Z/ AQR3A-S-Z18/ AQRA-S-Z/ AQRA-S-Z/ AQRA-S-Z18/ Items Input voltage to 6V DC to 18V DC 18 to 8V DC to 6V DC to 18V DC 18 to 8V DC Input Input impedance Approx..6 kω Approx..86 kω Approx. 1.36 kω Approx..6 kω Approx..86 kω Approx. 1.36 kω * Drop-out voltage, 1 V min. Ta = Max. C Max. load current 3 A* A* F voltage 75 to V AC Frequency 5 to 65 Hz Non-repetitive surge current Max. OFF-state leakage current Max. ON-state voltage drop Min. load current 3 A* 3 A* 3 In one cycle at 6 Hz 5 ma (when V AC applied) at 6 Hz 1.6 V 1 ma* at max. carrying current. Characteristics (at C 68 F, Input ripple: 1% or less) Type Zero-cross type Item Standard type Reinforced type Operate time, max. 1/ cycle of voltage sine wave + 1 ms Release time, max. 1/ cycle of voltage sine wave + 1 ms Insulation resistance, min., Initial M Ω between input, output and case at V DC Breakdown voltage 1, V AC between input, output and case, V AC between input, output and case For 1 min. Vibration Functional to 55 Hz at double amplitude of mm* 1 hour for X, Y, Z axes resistance Destructive to 55 Hz at double amplitude of mm* minutes for X, Y, Z axes Shock Functional Min. 98 m/s { G} 5 time each for X, Y, Z axes resistance Destructive Min. 98 m/s { G} time each for X, Y, Z axes Ambient temperature C to +8 C F to +176 F Storage temperature 5 C to +85 C 13 F to +185 F Operational method Zero-cross (Turn-ON and Turn-OFF) Note: *3A and A type is to 55 Hz at double amplitude of mm.59 inch.
REFERENCE DATA 1. current vs. ambient temperature Use load current within range specified in the figure below. Tested condition: 1) (1) A, 15A, A type A ; optional (AQP-HS- JA) or a 1 1 3. mm aluminum sheet (painted black) () 3 A, A type Shown with standard (AQP-HS-3/ A) ) If attached to a, use a heatconductive compound or similar coating to improve cooling. If the mounting surface is not metallic and a is not used, expose the bottom surface and plate surface to improve heat dissipation. The graphs show the characteristics when the relay is mounted as shown in the right figure. ; ; ; ; Hole for radiation ( 35 mm) 3 mm or greater Washers are added to lift the relay. (1) A type () 15 A type (3) A type () 3 A type current, A 8 6 3 6 8 Ambient temperature C current, A 16 15 1 8 7 6 3 6 8 Ambient temperature, C current, A 16 1 8 3 6 8 Ambient temperature, C current, A 3 3 6 8 Ambient temperature, C (5) A type -1. Non-repetitive surge current vs. carrying time ( A type) current, A 3 3 6 8 Ambient temperature, C Non-repetitive surge current, A 18 16 1 1 8 6 1 3 5 7 3 7 No. of cycles at 6 Hz -. Non-repetitive surge current vs. carrying time (15 A type) Non-repetitive surge current, A 18 16 1 1 8 6 1 3 5 7 3 7 No. of cycles at 6 Hz -3. Non-repetitive surge current vs. carrying time ( A type) Non-repetitive surge current, A 18 16 1 1 8 6 1 3 5 7 3 7 No. of cycles at 6 Hz -. Non-repetitive surge current vs. carrying time (3 A, A type) Non-repetitive surge current, A 3 A type 3A type 1 3 5 7 3 7 No. of cycles at 6 Hz 3. Input current vs. input voltage ( A, 15 A, A, 3 A, A common) Input current, ma 3 5 15 5 ( to 6 V) ( to 18 V) (18 to 8 V) 5 15 5 3 Input voltage, V
DIMENSIONS (mm inch) 1. Tab terminal The CAD data of the products with a mark can be downloaded from: http://panasonic-electric-works.net/ac Schematic 9.35.8 6 1.76 1. Input power source _ + 3 1 power source Mounting hole 7.6 1.87 59.33 -. dia. -.173 dia. Mounting dimensions (Bottom view) Conform to AMP plug-in terminal #1 series receptacle Conform to AMP plug-in terminal # series receptacle 7.6±.1 1.87±. -.3 dia. or M -.169 dia. Max. 7.5 Max..95 Max. 15 Max..591 Max. Max..9. Screw terminal -M screw terminal 9.35.8 6 1.76 1. Input power source _ + 3 Schematic 1 power source Mounting hole 5. 1.77 7.6 1.87 59.33 -. dia. -.173 dia. Mounting dimensions (Bottom view) 7.6±.1 1.87±. -.3 dia. or M -.169 dia. Max. 7.5 Max..95 Max. 17 Max..669 max. Max..9 ACCESSORIES Heat sink (For A, 15A and A)..173 1.969..173 R..87.79 Mounting dimensions (Bottom view) -M or. dia. 3-M.59 9 3.53 5.16 11.1.37 33.3 1.311 8 3.1 +.5 +. 3.937.59 9±.1 3.53±. AQP-HS-JA 3 1.181 7.6 1.87 3.937.79 9.35.5.965 8.5 1.1 5 1.77.59 ±. 1.969±.8 General tolerance: ±.5 ±.
Heat sink (For 3 A, A) 1.969...173.173.79 Mounting dimensions (Bottom view) -M or. dia. 9 3.53 3-M 7.6 1.87 R..87 11.1.37 8 3.1 5 33.3 +.5.16 1.311 3.937 +. 9±.1.593.53±..59 AQP-HS-3/A 56.79.5 1.5 5.96.965 9 8.5.35 1.1 5 1.77.59 ±. 1.969±.8 General tolerance: ±.5 ±. With terminal cover.59 59.33 1.53 7 1.8 5.5.17.59 AQP-PC.5.965 General tolerance: ±.5 ±. DIN rail mounting plate Mounting rail 13.6.535 M M 56.5 7.6 1.87 M AQP-DP 7.765 86 3.386 1.73 18.1.713 5.5.17 5.197 AT8-DLA1 1, 39.37 15 15.591.39.591.75R.8R 15 15.591.39.591-5.5 15 slot -.17.591 slot 35 1.378 7 5 1.63.95.197.59 7.5.95 General tolerance: ±.5 ±.
Fastening plate 1.7 M 1.969.39 ATA86 ATA86 UP.39 Recommended Temperature Controllers <KTH Temperature Controller> Our temperature controller is recommended for use with our Solid State Relays. 8mm 1.89inch Features Data can be collected using the RS85 communications interface via a PLC. Improved visibility using a negative type LCD and backlight. Depth-wise length (chassis dimension) is 56 mm.5 inch. 8mm 1.89inch 56mm.5inch Substitute part numbers Power supply Control output to V AC Relay contact AKTH111 *For detailed product information about temperature controllers, please refer to our website: http://panasonic-denko.co.jp/ac/e/fasys/component/temperature_controller/ For Cautions for Use.