METAL FOIL CHIP FIXED RESISTOR

METAL FOIL CHIP FIXED RESISTOR Metal Foil Chip Fixed Resistor 2W The highest power is up to 2W. TCR ppm/ The lowest TCR is ppm/. Current detecting resistors for power supply, motor circuits,etc Superior mechanical and frequency characteristics ROHS Compliant with RoHS directive Halogen free r equirement Switching Power Supply Over Current Protection Voltage Regulation Module(VRM) DC-DC Converter Charger Automotive Engine Control Portable Devices etc. MF L 2 H R00 F T Product Code Power Rating Series Code Code T.C.R Code Resistance Value Code Resistance Tolerance Code Packaging Style Code Metal Foil Chip Fixed Resistor Code G J L Power rating series /2W H 3/4W W 2W Code 03 05 06 0 2 T.C.R Code (ppm/ ) H K 00 W 200 R m M Units: Decimal point should be expressedby R Units m Decimal point should be expressed by M R005=0.005 R00=0.00 R047=0.047 6M=6.m Code Tolerance F J % G 2% 5% Code T C Packaging Style Tape & Reel Case Ceramic Substrate Alloy Plate Top Electrode Primary Overcoat Cu Plating Secondary Overcoat Edge Electrode Barrier Layer External Electrode

(m ) L (mm) W (mm) Tt (mm) Ta (mm) Tb (mm) R003~R004 R005 R003~R004 R005 R003~R004 R005 R003.60 0.20 2.00 0.20 0.80 0.20.25 0.5 0.70 0.5 0.70 0.5 0.35 0.25 0.40 0.25 3.20 0.20.60 0.5 0.75 0.5 0. 0.30 0.60 0.20 0.35 0.20 0.70 0.30 0.40 0.30 0.90 0.30 0. 0.30.60 0.30 R004~R005 5.00 0.20 2. 0.20 0.75 0.20 0.60 0.30.30 0.30 R005 0.80 0.30 R002 2.30 0.30 R003.90 0.30 R004.70 0.30 6.40 0.20 3.20 0.20 0.75 0.20 0.90 0.30 R005-R006.20 0.30 R007.0 0.30 R007 0.90 0.30 00-55 70 Percent Rated Load 75 25 Operating Temperature Range: -55 ~70 0-75 - -25 0 25 75 00 25 Ambient temperature( ) 70 70 ( ) Note: For resistors operated in ambient over 70,rated load (rated power) shall be derated in accordance with the above figure. 70 Rating Power at 70 (W) Note: /2 2 Limiting Element Current (A) 5.8 8.3 8.3 Max.Overload Current (A) 35.4 40.8 40.8 8.3 40.8 Current of DC or AC RMS value. 2 I= I= or Limiting element current whichever is lower. I Rated current(a) P Rated power(w) R Normal resistance( ) Resistance Range /2 2.9 28.9 0.003 R 0.030 /2 3/ 4 0.003 R 0.047 0.003 R 0.068 0.003 R 0.00 25.8 5.6 0.002 R 0.00 0.00 <R 0.200 2

METAL FOIL CHIP FIXED RESISTOR T.C.R (ppm/ ) Resistance Range Resistance Tolerance % 2% 5% 0.003 R 0.00 200 200 200 0.00 R 0.030 00 00 00 0.003 R 0.00 00 00 00 0.00 R 0.047 0.003 R 0.00 00 00 00 0.00 R 0.068 0.003 R 0.00 00 00 00 0.00 R 0.00 0.002 200 200 200 0.003 R 0.00 00 00 00 0.00 R 0.200 0.00 ppm/ Note: The chip resistor with resistance value below 0.00 and TCR ppm/ can be customized. Item Solderability Resistance to Soldering Heat Substrate Bending Test T.C.R Rapid Change of Temperature Short Time Overload Damp Heat Steady State 70 Endurance at 70 Endurance at Upper Category Temperature Insulation Resistance Specifications 95% 95% Cover Min R.0%R R.0%R Within specified T.C.R R.0%R R.0%R R.0%R R.0%R R.0%R 000M Min (IEC605-) Test Methods (IEC605-) IEC 605-4.7 245 5 3s 0.3s. Lead-free solder bath at 245 5 for 3s 0.3s. IEC 605-4.8 270 5 0s s. Lead-free solder bath at 270 5 for 0s s. IEC 605-4.33 (Bending distance) 5mm 4mm 2mm (Duration) 60s 5s. IEC 605-4.8 +20 /-55 /+20 /+25 /+20 IEC 605-4.9-55 (30 ) (5 ) 25 (30 ) 00-55 (30min) normal temperature(5min) 25 (30min) 00 cycles. IEC 605-4.3 /2W 3/4W W 5 Rated Power for 5 s. 2W 4 Rated Power for 5 s. IEC 605-4.24 40 2 93% 3%RH 000h ( ).5 / 0.5 40 2 93% 3%RH 000h rated current or limiting element current whichever is lower for.5h ON/0.5h OFF. IEC 605-4.25. 70 2 000 ( ).5 / 0.5 70 2 000h rated current or limiting element current whichever is lower for.5h ON/0.5h OFF. IEC 605-4.25.3 70 2 000 70 2 000h IEC 605-4.6 00V 5V Apply DC 00V 5V between substrate and terminations for min, then check insulation resistance. 3

Item Specifications IEC 605-4.7 (IEC605-) Test Methods (IEC605-) Voltage Proof No breakdown or flashover Apply max.overload voltage of AC RMS at a rate of approximately 00V/s between substrate and terminations for 60s 5s. Component Solvent Resistance R.0%R IEC 605-4.29 (IPA) 23 5 0 Iso-propyl alcohol (IPA) 23 5 0h. 83 90 Packaging see the 83-90 Page. 4

PACKAGING AND PRECAUTION OF CHIP RESISTOR Chip fixed resistor C A B 0005 020 0402 20 Thick Film Resistor and Thin Film Resistor A 0.7 0.23 0.45 0.80.05.90 2.00 3. 4.80 B 0.60 0.84.45 2. 3.25 4. 4.60 6. 7.80 C 0.22 0.38 0.60 0.95.40.75 2.70 2.70 3.40 Metal Foil Resistor R003~R004 R005~R030 R003~R004 R005~R047 R003~R004 R005~R068 R003~R009 R00~R00 R002~R004 R005~R200 A 0.4 0.6 0.5 0.8 0.8.8.6 2.7.0 3.8 B 2.8 3.2 4.4 6.3 8.0 C.0.4.8 2.9 3.4 Thick film chip network resistor A B Q Q2 Q3 Q2 Q3 Q2 Q RCMY08 / RCMT08 / RCML08 A B Q Q2 Q3 RCMY08 0.30 0.90 0.20 0.20 0.20 RCMT08 0.38.60 0.40 0.20 0.30 RCML08 0.80 2.70 0.60 0.40 0.40 83

Paper Taping 0005 020 0402 RCMY08 RCMT08 For 0005 020 0402 RCMY08 RCMT08 A B W F E 0005 020 0402 0.45 0.70.20 0.02 0.0 0.0 0.25 0.40 0.70 0.02 0.0 0.0 8.00 8.00 8.00 0.02 0.20 0.20 3. 3. 3. 0.05 0.05 0.05.75.75.75 0.05 0.0 0.0 RCMY08.57 0.05 0.77 0.05 8.00 0.20 3. 0.05.75 0.0 RCMT08 2.20 0.0.20 0.0 8.00 0.20 3. 0.05.75 0.0 0005 020 0402 P P0 D0 T T P 4.00 0.0 4.00 0.0 4.00 0.0.55 0.02. 0.0. 0.0 0.7 0.02 0.28 0.04 / 0.3 0.02 0.42 0.05 0.42 0.05 RCMY08 4.00 0.0. 0.0 / 0.60 0.0 RCMT08 2.00 0.0 4.00 0.0. 0.0 / 0.60 0.0 20 RCML08: For 20 RCML08: 84

PACKAGING AND PRECAUTION OF CHIP RESISTOR A B W F E.85 0.0.0 0.0 8.00 0.20 3. 0.05.75 0.0 2.35 0.0.65 0.0 8.00 0.20 3. 0.05.75 0.0 3. 0.20.90 0.20 8.00 0.20 3. 0.05.75 0.0 20 3. 0.20 2.80 0.20 8.00 0.20 3. 0.05.75 0.0 RCML08 3. 0.20.90 0.20 8.00 0.20 3. 0.05.75 0.0 P P0 P 4.00 0.0 4.00 0.0. 0.0 0.60 0.0 D0 Thick Film Resistor and Thin Film Resistor T Metal Foil Resistor 0.75 0.0 4.00 0.0 4.00 0.0. 0.0 0.75 0.0 0.95 0.0 4.00 0.0 4.00 0.0. 0.0 0.75 0.0 0.95 0.0 20 4.00 0.0 4.00 0.0. 0.0 0.75 0.0 RCML08 4.00 0.0 4.00 0.0. 0.0 0.75 0.0 For Embossed Taping A0 B0 W F E t 5. 0.5 2.82 0.5 2.00 0.0 5. 0.0.75 0.0 0.25 0.05 6.78 0.5 3.45 0.5 2.00 0.0 5. 0.0.75 0.0 0.25 0.05 P P0 P D0 D Thick Film Resistor and Thin Film Resistor K0 Metal Foil Resistor 4.00 0.0 4.00 0.0.+0.0/-0. 0.0 0.84 0.0 0.84 0.0 4.00 0.0 4.00 0.0.+0.0/-0. 0.0 0.8 0.0.00 0.0 85

Reel 0005 020 0402 20 RCMY08 RCMT08 RCML08 M W T A B C D 78 2.0 9.5.0 2.5.5 2.0 0.5 3.0 0.5 2.0 0.5 58.0 2.0 78 2.0 3.0 0.5 5.5.5 2.0 0.5 3.0 0.5 2.0 0.5 57.0 2.0 Packaging Quantity Packaging style Tape & reel Case 0005 020 0402 RCMY08 RCMT08 20 RCML08 0005 020 0402 RCMY08 RCMT08 RCML08 20 Quantity(pcs) 20000 0000 00 4000 000 0000 4000 n E-24 E-24 series( 0 ) ( unit 0.00 0.0 0. 0 00 k 0k 00k M 0M 00M 000M ).0.5 2.2 3.3 4.7 6.8..6 2.4 3.6 5. 7.5.2.8 2.7 3.9 5.6 8.2.3 2.0 3.0 4.3 6.2 9. 86

PACKAGING AND PRECAUTION OF CHIP RESISTOR n E-96 E-96 series ( 0 ) ( unit 0.00 0.0 0. 0 00 k 0k 00k M 0M 00M 000M ).00.02.05.33.37.40.78.82.87 2.37 2.43 2.49 3.6 3.24 3.32 4.22 4.32 4.42 5.62 5.76 5.90 7. 7.68 7.87.07.0.43.47.9.96 2.55 2.6 3.40 3.48 4.53 4.64 6.04 6.9 8.06 8.25.3. 2.00 2.67 3.57 4.75 6.34 8.45.5.54 2.05 2.74 3.65 4.87 6.49 8.66.8.58 2.0 2.80 3.74 4.99 6.65 8.87.2.24.62.65 2.5 2.2 2.87 2.94 3.83 3.92 5. 5.23 6.8 6.98 9.09 9.3.27.69 2.26 3.0 4.02 5.36 7.5 9.53.30.74 2.32 3.09 4.2 5.49 7.32 9.76 E 96 E-96 series() multiplied Cross-reference List and Resistance Cross-reference List multiplied code 0 0 A 0 B 2 0 C 3 0 D 4 0 E 5 0 F 6 0 G 7 0 H - 0 X -2 0 Y -3 0 Z Code E-96 E-96 resistance Code E-96 E-96 resistance Code E-96 E-96 resistance Code E-96 E-96 resistance 0 00 25 78 49 36 73 562 02 02 26 82 324 74 576 03 05 27 87 5 332 75 590 04 07 28 9 52 340 76 604 05 0 29 96 53 348 77 69 06 3 30 200 54 357 78 634 07 5 3 205 55 365 79 649 08 8 32 20 56 374 80 665 09 2 33 25 57 383 8 68 0 24 34 22 58 392 82 698 27 35 226 59 402 83 75 2 30 36 232 60 42 84 732 3 33 37 237 6 422 85 7 4 37 38 243 62 432 86 768 5 40 39 249 63 442 87 787 6 43 40 255 64 453 88 806 7 47 4 26 65 464 89 825 8 42 267 66 475 90 845 9 54 43 274 67 487 9 866 20 58 44 280 68 499 92 887 2 62 45 287 69 5 93 909 22 65 46 294 70 523 94 93 23 69 47 30 7 536 95 953 24 74 48 309 72 549 96 976 87

Description for Resistance Value Code and Marking of Thick Film Chip Resistor Resistance Value Code All the resistance value code of thick film chip resistor is corresponding with the marking. Marking E-24 ( 5%) 0 E-24 series: Express resistance value on the glass side with three digits, the first tow digits should be significant and the third one denote number of zeros. 0K 33 E-24 ( %& 0.5%) E-24 series( %& 0.5%): One short bar under marking letter. E-96 E24 %& 0.5% 20 4R02 4R03 E-96 series & E-24 series:for the dimension type of 20 4R02 4R03 express the resistance value with four digits, the first three digits are significant figures and the fourth de notes the number of zeros. 00K 33 E-96 E-96 For the dimension type of, express the resistance value with three code, the first two digit code denote the resistance of E-96 series, and the third code of letter denote the multiplier (see the table three and four ). 2M R The decimal point should be expressed by R. 5.6 0 The jumper should be expressed by 0 0 0005 020 0402 For the dimension type of 0005 020 0402 there is no mark on the glass side. IEC IEC E24 For the resistance which don't belong to IEC serial, use the resistance of IEC serial which is most close to the required resistance of non-iec serial for replacement. To get agreement by both party if there special requirement for the marking. 88

PACKAGING AND PRECAUTION OF CHIP RESISTOR Description for Resistance Value Code and Marking of Thin Film Chip Resistor Resistance Value Code 020 0402 20 All resistance value code of thin film chip resistor,including 020 0402 20 size used four digits. Marking TD03G470BT 470=4.7K R=.5 To use four digits code represent resistance value, 470=4.7K R=.5 E24 E96 E96. When resistance value belongs to E24 as well as E96 series, we suggest preferentially use E96 series. 0K=002, 03 20 Marking for 20 Size Resistor 20 For 20 size resistor, express the resistance value with four digits code; 00K Marking for Size Resistor -E96 For resistance value belongs to E96 series, express the resistance value with three digits code. 2M -E24 For resistance value belongs to E24 series, express the resistance value with three digits code. 0K The decimal point should be expressed by "R". 5.6 020 0402 For the dimension type of 020 0402 there is no mark on the glass side. 89

2 3 4 5 6 7 Use in various types of liquid, including water, oils, chemicals, and organic solvents. 2 Use outdoors where the products are exposed to direct sunlight, or in dusty places. 3 Use in places where the products are exposed to sea winds or corrosive gases, including Cl2, H2S, Nh3, SO2, and No2 etc. 4 Use in places where the products are exposed to static electricity or electromagnetic waves. 5 Use in proximity to heat-producing components, plastic cords, or other flammable items. 6 Use involving sealing or coating the products with resin or other coating materials. 7 Use involving unclean solder or use of water or water-soluble cleaning agents for cleaning after soldering. 2 3 4 : 5 30 30% 70% Avoid applying power exceeding normal rated power, exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 2 Be careful when pick up the products with tweezers. There may be a care that the overcoat and / or the body can be chipped. 3 Soldering tip shall not touch the product when install product manually. 4 Storage conditions: T 5 30, RH 30% 70%. Recommended wave solder profile Recommended reflow profile Recommended solder alloy 96.5Sn/3.0Ag/0.5Cu 90