AEC-Q200 Compliant with AEC-Q200 standard. Miniature and light weight. Suit for reflow and wave flow solder
|
|
- Jasper Dorsey
- 5 years ago
- Views:
Transcription
1 Anti-Sulfurated Thick Film Chip Fixed Resistor Automotive Grade Features AEC-Q200 Compliant with AEC-Q200 standard Miniature and light weight Suit for reflow and wave flow solder Stable electrical capability,high reliability Low assembly cost,suit for automatic SMT equipment Superior mechanical and frequency characteristics With good anti-sulfuration performance RoHS Compliant with RoHS directive Halogen free requirement Designation AH D 03 K 3 F T Product Code Rated Power Code Code T.C.R Code Resistance Value Code Resistance Tolerance Code Packaging Style Code (E-24 ) Anti- sulfuration Thick Film Chip Fixed Resistor Automotive Grade Code C Rated Power /6W D /0W E /8W F /4W Code Code K L Chip No Marking Jumper Three digits (E-24 series):the first two digits are significant figures and the third one denotes number of zeros. (E-96 ) Four digits(e-96 series):the first three digits are Significant figures and the four one denotes number of zeros. R Decimal point should be expressed by "R". Example: 03 =0K (E-24) 3=K (E-96) R0 =.0 (E-24) 000=0 Code Tolerance D F G J K Chip Jumper F G J 0.5% % 2% 5% 0% 0m 20m 50m Code T C Packaging Style Tape & Reel Case 62
2 ANTI-SULFURATED THICK FILM CHIP FIXED RESISTOR AUTOMOTIVE GRADE Construction Dimensions Ceramic Substrate Bottom Electrode Top Electrode Resistor Layer Primary Overcoat Secondary Overcoat Edge Electrode Barrier Layer External Electrode L W Dimensions t (mm) a b Derating Curve Percent Rated Load Operating Temperature Range: ~ : Ambient temperature ( ) 70 ( ) Note For resistors operated in ambient over 70,rated load (rated power or rated current) shall be derated in accordance with the above figure. Ratings 70 Rated Power at 70 (W) Limiting Element Voltage (V) Max. Overload Voltage (V) AH0402 / Rated Current for Chip Jumper at 70 (A) Max. Overload Current for Chip Jumper (A) AH0603 / AH0805 / AH / Note VoltageofDCorACRMSvalue. 2 E= E= or Limiting element voltage whichever is lower. E Rated voltage(v) P Rated power(w) R Normal resistance( ) 63
3 Ratings T.C.R (ppm/ ) Resistance Range 0.5% % Resistance Tolerance 2% 5% 0% AH0402 R 0 / AH0603 AH R M AH M R 0M / Characteristics Item Specifications Resistor Jumper Test Methods High Temperature Exposure (Storage) R (2.0%R 0.05 ) AEC-Q200 Test 3/MIL-STD-202 Method 08 T=25, 0 T=25, Unpowered. Temperature Cycling R (0.5%R 0.05 ) AEC-Q200 Test 4/JESD22 Method JA (30 ) ( ) 25 (30 ) 0-55 (30min) normal temperature( min) 25 (30min), 0 cycles. Biased Humidity Operational Life Resistance to Solvents R (3.0%R 0.05 ) R (3.0%R 0.05 ) Clearly marked AEC-Q200 Test 7/ MIL-STD-202 Method % 0% ( ) 0 85 /85%RH. 0 hours, Apply 0% of operating power (current) or limiting element voltage whichever is lower. AEC-Q200 Test 8/ MIL-STD-202 Method ( ).5 / h rated voltage (current) or limiting element voltage whichever is lower for.5h ON/0.5h OFF. AEC-Q200 Test 2/ MIL-STD-202 Method 25 3min 0 3 Immersed in three solvents after 3min immersion, brush wipe 0 times, a total of 3 times, washing with washing and cleaning agent, room temperature on the surface of the ventilation drying. Mechanical Shock Vibration AEC-Q200 Test 3/ MIL-STD-202 Method 23 g s 6ms 3 8 Positive half wave, peak acceleration: g s, pulse duration: 6ms, three axis six to each 3 times, a total of 8 times. AEC-Q200 Test 4/ MIL-STD-202 Method 204 0Hz~2000Hz, 5g s 20min X Y Z 2 36 Frequency: 0Hz~ 2000Hz, acceleration: 5 g s, a loop 20min, X, Y, Z three directions, each direction 2 cycles, 36 cycles. Resistance to Soldering Heat R (0.5%R 0.05 ) AEC-Q200 Test 5/ MIL-STD-202 Method s s Lead-free solder bath at for 0s s. 64
4 ANTI-SULFURATED THICK FILM CHIP FIXED RESISTOR AUTOMOTIVE GRADE Characteristics Continue Item Specifications Resistor Jumper Test Methods Thermal Shock R (0.5%R 0.05 ) AEC-Q200 Test 6/MIL-STD-202 Method (5 ) ( 20 ) 55 (5 ) (5min) normal temperature( 20s) 55 (5min) 300 cycles. ESD Electrostatic Discharge (ESD) R (3.0%R 0.05 ) AEC-Q200 Test 7/AEC-Q Human body model, pos + neg dischargs. 0402/0603 KV KV 3KV Solderability T.C.R Flammability 95% 95% Cover Min Within specified T.C.R No ignition of the tissue paper or scorching or the pinewood board. AEC-Q200 Test 8/IEC s 0.3s. Lead-free solder bath at for 3s 0.3s. AEC-Q200 Test 9/IEC /-55 /+20 /+25 /+20 AEC-Q200 Test 20/UL-94 V-0 V- V-0 or V- are acceptable. Electrical test not required. Substrate Bending Test R (0.5%R 0.05 ) AEC-Q200 Test 2/AEC-Q (Bending distance) mm 4mm (Duration) 60s 5s Terminal Strength R (0.5%R 0.05 ) AEC-Q200 Test 22/AEC-Q : 7.7N 60 Appling force 7.7N for 60s s. Flame Retardance No flame AEC-Q200 Test 24/AEC-Q Vdc 32Vdc 500A.0Vdc Subjected to voltage from 9.0 to 32.0 VDC(current clamped up to 500A), and each voltage level shall be increased in.0 VDC for one hour minimum. Insulation Resistance 0M Min IEC V 5V Apply DC V 5V between substrate and terminations for min, then check insulation resistance. Voltage Proof No breakdown or flashover IEC V/s 60s 5s. Apply max. overload voltage of AC RMS at a rate of approximately V/s between substrate and terminations for 60s 5s. Short Time Overload R (2.0%R 0.05 ) IEC / ( ) times rated voltage or max. overload voltage(current) whicheverislowerfor5s. 65
5 Characteristics Continue Item Operation at Low Temperature Specifications Resistor R (2.0%R 0.05 ) Jumper Test Methods IEC ( ) ( ) , h without load rated voltage(current) or limiting element voltage whichever is lower for 45min, 5min without load. Sulfuration- Resistant R (5%R 0.05 ) R m (J ) R 40m (G ) R 20 m (F ) Cutting oil : sulphur powder,constant temperature: 05 3,for 0h. Packaging Packaging see the Page. 66
6 PACKAGING AND PRECAUTION OF CHIP RESISTOR Recommend Solder Pad Size Chip fixed resistor C A B Thick Film Resistor and Thin Film Resistor A B C Metal Foil Resistor R003~R004 R005~R030 R003~R004 R005~R036 R003~R004 R005~R056 R003~R009 R00~R R003~R004 R005~R200 A B C Thick film chip network resistor A B Q Q2 Q3 Q2 Q3 Q2 Q RCMY08 / RCMT08 / RCML08 A B Q Q2 Q3 RCMY RCMT RCML
7 Packaging Paper Taping RCMY08 RCMT08 For RCMY08 RCMT08 A B W F E RCMY RCMT P P0 D0 T T P / RCMY08 / RCMT / RCML08: For RCML08: 84
8 PACKAGING AND PRECAUTION OF CHIP RESISTOR A B W F E RCML P P0 P D0 Thick Film Resistor and Thin Film Resistor T Metal Foil Resistor RCML For Embossed Taping A0 B0 W F E t P P0 P D0 D K / /
9 Reel RCMY08 RCMT08 RCML M W T A B C D Packaging Quantity Packaging style Tape&reel Case RCMY08 RCMT RCML RCMY08 RCMT08 RCML Quantity(pcs) IEC E-24 E-96 Series Resistance Cross-reference List n E-24 E-24 series( 0 ) ( unit k 0k k M 0M M 0M )
10 PACKAGING AND PRECAUTION OF CHIP RESISTOR n E-96 E-96 series ( 0 ) ( unit k 0k k M 0M M 0M ) E E-96 series(0603) multiplied Cross-reference List and Resistance Cross-reference List multiplied code 0 0 A 0 B 0 2 C 0 3 D 0 4 E 0 5 F 0 6 G 0 7 H 0 - X 0-2 Y 0-3 Z Code E-96 E-96 resistance Code E-96 E-96 resistance Code E-96 E-96 resistance Code E-96 E-96 resistance
11 Description for Resistance Value Code and Marking of Thick Film Chip Resistor Resistance Value Code All the resistance value code of thick film chip resistor is corresponding with the marking. Marking E-24 (0603 5%) 0 E-24 series: Express resistance value on the glass side with three digits, the first tow digits should be significant and the third one denote number of zeros. 0K 33 E-24 (0603 %& 0.5%) E-24 series (0603 %& 0.5%) : One short bar under marking letter. E-96 E24 %& 0.5% R02 4R03 E-96 series & E-24 series:for the dimension type of R02 4R03 express the resistance value with four digits, the first three digits are significant figures and the fourth de notes the number of zeros. K 33 E E-96 For the dimension type of 0603, express the resistance value with three code, the first two digit code denote the resistance of E-96 series, and the third code of letter denote the multiplier (see the table three and four ). 2M R The decimal point should be expressed by R The jumper should be expressed by For the dimension type of there is no mark on the glass side. IEC IEC E24 For the resistance which don't belong to IEC serial, use the resistance of IEC serial which is most close to the required resistance of non-iec serial for replacement. To get agreement by both party if there special requirement for the marking. 88
12 PACKAGING AND PRECAUTION OF CHIP RESISTOR Description for Resistance Value Code and Marking of Thin Film Chip Resistor Resistance Value Code All resistance value code of thin film chip resistor,including size used four digits. Example TD03G470BT 470=4.7K R50=.5 To use four digits code represent resistance value, Example 470=4.7K R50=.5 Marking E24 E96 E96. When resistance value belongs to E24 as well as E96 series, we suggest preferentially use E96 series. Example 0K=2, Marking for Size Resistor For size resistor, express the resistance value with four digits code; Example K 4.7K 0603 Marking for 0603 Size Resistor 0603-E96 For resistance value belongs to E96 series, express the resistance value with three digits code. Example E24 For resistance value belongs to E24 series, express the resistance value with three digits code. Example 4.7K 270K For the dimension type of there is no mark on the glass side. Example 89
13 Chip Resistor Instructions for Use Application of the products in a special environment can deteriorate product performance Use in various types of liquid, including water, oils, chemicals, and organic solvents. 2 Use outdoors where the products are exposed to direct sunlight, or in dusty places. 3 Use in places where the products are exposed to sea winds or corrosive gases, including Cl 2, H2S, Nh 3, SO 2, and No 2 etc. 4 Use in places where the products are exposed to static electricity or electromagnetic waves. 5 Use in proximity to heat-producing components, plastic cords, or other flammable items. 6 Use involving sealing or coating the products with resin or other coating materials. 7 Use involving unclean solder or use of water or water-soluble cleaning agents for cleaning after soldering : % 70% Precautions on use of products Avoid applying power exceeding normal rated power, exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 2 Be careful when pick up the products with tweezers. There may be a care that the overcoat and / or the body can be chipped. 3 Soldering tip shall not touch the product when install product manually. 4 Storage conditions: T 5 30, RH 30% 70%. Soldering Recommended reflow profile Recommended wave solder profile Recommended solder alloy 96.5Sn/3.0Ag/0.5Cu 90
AEC-Q200 Compliant with AEC-Q200 standard. Miniature and light weight. Suit for reflow and wave flow solder
Thick Film Chip Fixed Resistor Automotive Grade Features AEC-Q200 Compliant with AEC-Q200 standard Miniature and light weight Suit for reflow and wave flow solder Stable electrical capability,high reliability
More informationGENERAL THICK FILM CHIP FIXED RESISTOR
GENERAL THICK FILM CHIP FIXED RESISTOR General Thick Film Chip Fixed Resistor Features Miniature and light weight Suit for reflow and wave flow solder Stable electrical capability,high reliability Low
More informationGENERAL THICK FILM CHIP FIXED RESISTOR
GENERAL THICK FILM CHIP FIXED RESISTOR Miniature and light weight Suit for reflow and wave flow solder Stable electrical capability,high reliability Low assembly cost,suit for automatic SMT equipment Superior
More informationMETAL FOIL CHIP FIXED RESISTOR
METAL FOIL CHIP FIXED RESISTOR Metal Foil Chip Fixed Resistor 2W The highest power is up to 2W. TCR ppm/ The lowest TCR is ppm/. Current detecting resistors for power supply, motor circuits,etc Superior
More informationMetal Film MELF Resistors
FEATURES SURFACE MOUNT IN SIZES 0102 (0805), 0204 (1406) AND 0207 (2410) HIGH RELIABILITY AEC-Q200 QUALIFIED (see part numbering system for details) THIN FILM CONSTRUCTION AVAILABLE IN PRECISION TOLERANCE
More informationAutomotive Grade Thick Film Array Chip Resistor
CN.. Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -EC-Q200 Compliance -Small size and light weight -Reduction
More informationSPECIFICATIONS. Metal Film Precision Resistor. CSRV-Serie SWISSDIS. Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern
SWISSDIS Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern Tel.: +41 62 919 44 00 Fax: +41 62 919 44 01 info@swissdis.ch www.swissdis.ch SPECIFICATIONS Metal Film Precision Resistor CSRV-Serie Version August
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & ANTI-SULFURATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RMAW K HTS-0001 /5 Date: 2017. 4. 21 Data sheet : ANTI-SULFURATION RMAW10,16,20,32 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock conditions Temperature: +5 C +35 C
More informationDATA SHEET CURRENT SENSOR - LOW TCR AUTOMOTIVE GRADE PA_E series 5%, 1%, 0.5% sizes 2512
Product specification January 31, 2018 V. DATA SHEET CURRENT SENSOR - LOW TCR AUTOMOTIVE GRADE PA_E series 5%, 1%, 0.5% sizes 2512 RoHS compliant & Halogen free Product specification 2 SCOPE This specification
More informationDATA SHEET THICK FILM CHIP RESISTORS Automotive Precision grade AC series 0.1%, 0.5%, 1%, TC 50
Product specification March 14, 2016 V.0 DATA SHEET THICK FILM CHIP RESISTORS Automotive Precision grade AC series 0.1%, 0.5%, 1%, TC 50 sizes 0402/0603/0805/1206 RoHS compliant & Halogen Free Product
More informationVersion: 1.2 Document code:ma2512 Effective date : Page: 1 of 7. Metal Alloy shunt resistor MA2512 series ROHS
Document code: Page: 1 of 7 Metal Alloy shunt resistor series ROHS Metal Alloy Shunt Resistor Specification Document code: Page: 2 of 7 Metal Alloy shunt resistor series ROHS Scope This specification applies
More informationThis specification applies for the RMS series of Anti-Sulfurated thick film chip resistors made by TA-I. RMS 10 J T 103.
page number 1/13 1. Scope : This specification applies for the RMS series of Anti-Sulfurated thick film chip resistors made by TA-I. 2. Construction: Over Coat (Color : Black) Conductor Sn Plating Ceramic
More informationDATA SHEET ANTI-SULFURATED CHIP RESISTORS AF series 5%, 1%, 0.5%
Product specification June 07, 2017 V.5 DATA SHEET ANTI-SULFURATED CHIP RESISTORS AF series 5%, 1%, 0.5% sizes 0201/0402/0603/0805/1206/1210/1218/2010/2512 RoHS compliant & Halogen free Product specification
More informationChip Resistors / Chip Arrays
Chip Resistors / Chip Arrays w w w. b o u r n s. c o m I. CR Series Chip Resistors...92 II. CAT/CAY Series Chip Resistor Arrays...96 CAT/CAY 16 Series...96 CAY1 Chip Resistor Array...97 CAY17 Bussed Resistor
More informationCR0603/CR0805/CR Chip Resistors
*RoHS COMPLIANT Features RoHS compliant* Power rating at 7 C: CR63 -.1 W, CR85 -.125 W, CR126 -.25 W Tight tolerances of bottom electrode width Suitable for all types of soldering processes Three layer
More informationSPECIFICATION FOR APPROVAL. 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free)
PAGE : 1 OF 7 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope This specification applies to 0.8mm x 1.6mm size 1/2W, fixed metal film chip resistors rectangular type for use in
More informationsizes 0201/0402/0603/0805/1206/1210/1218/2010/2512
Product specification August 29, 2014 V.2 DATA SHEET ANTI-SULFURATED CHIP RESISTORS AF series 5%, 1%, 0.5% sizes 0201/0402/0603/005/1206/1210/121/2010/2512 RoHS compliant & Halogen free Product specification
More informationThin Film Precision Chip Resistor (AR Series)
Features Advanced thin film technology Very tight tolerance down to ±0.01% Extremely low down to ±5PPM/C Wide resistance range 1ohm ~ 3Mega ohm Miniature size 0201 available Thin Film Precision Chip Resistor
More informationPRODUCT DATASHEET. is brought to you by. SOS electronic distribution of electronic components
PRODUCT DATASHEET is brought to you by SOS electronic distribution of electronic components Click to view availability, pricing and lifecycle information. Visit https://www.soselectronic.com/ Datasheet
More informationSPECIFICATION FOR APPROVAL. 1/32W, Low Resistance Chip Resistor (Lead / Halogen free)
PAGE : 1 OF 7 1/32W, 01005 Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope This specification applies 0.2mm x 0.4mm (01005) size 1/32W, fixed metal film chip resistors rectangular type for
More informationType CPF Series. Thin Film Precision Resistors. Key Features
Type CPF Series Key Features Thin film precision resistors with TC's to 15ppm and tolerances to 0.05%. Wide range of case sizes from 0201 to 2512 Suitable for all applications where close accuracy and
More informationDATA SHEET THICK FILM CHIP RESISTORS AUTOMOTIVE GRADE AC series ±5%, ±1%, ±0.5%
Product specification July 10, 2017 V.7 DATA SHEET THICK FILM CHIP RESISTORS AUTOMOTIVE GRADE AC series ±5%, ±1%, ±0.5% Sizes 0201/0402/0603/0805/06/ 10/18/2010/25 RoHS compliant & Halogen free AC SERIES
More informationDATA SHEET THICK FILM WIDE TERMINAL CHIP RESISTORS AUTOMOTIVE GRADE AC series ±5%, ±1%, ±0.5%
DATA SHEET THICK FILM WIDE TERMINAL CHIP RESISTORS AUTOMOTIVE GRADE AC series ±5%, ±1%, ±0.5% Sizes 0612/1020/1225 RoHS compliant & Halogen free Product specification December 11, 2015 V.1 Product specification
More informationRMC10,16,20,32,35,50,63 Automotive Grade Page: 1/10
+5 C +35 C 75% Product specification contained in this data sheet are subject to change at any time without notice If you have any questions or a Purchasing Specification for any quality Agreement is necessary,
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC1206 5%, 1%
1100 DATA SHEET GENERAL PURPOSE CHIP RESISTORS 1206 5%, 1% RoHS compliant Product specification Jul 02, 200 V.4 Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes
More informationData sheet. FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RMC-1K-17N1011 /1 Date: 2017. 11. 28 Data sheet Title: Style: FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note:
More informationDATA SHEET THICK FILM CHIP RESISTORS AUTOMOTIVE GRADE AC series ±5%, ±1%, ±0.5%
Product specification May 25, 2015 V.4 DATA SHEET THICK FILM CHIP RESISTORS AUTOMOTIVE GRADE AC series ±5%, ±1%, ±0.5% Sizes 0201/0402/0603/0805/1206/ 12/1218/20/2512 RoHS compliant & Halogen free Product
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. *RoHS COMPLIANT VERSIONS AVAILABLE Features Lead free version available (see
More informationData Sheet. Customer: Metal Film Precision MELF Resistor-CSRV Series Size: 0102/0204/0207
Data Sheet Customer: Product: -CSRV Series Size: 02/0204/0207 Issued Date: Edition: 04-Aug-17 REV.B VIKING TECH CORPORATION 光頡科技股份有限公司 No.70 Guangfu N. Rd., Hukou Township, Hsinchu County 303, Taiwan TEL:886-3-5972931
More informationMELF Coated Thin Film Precision Resistors (MELFC Series)
Features: Precision TCR of 0, 5, 25 & 50ppm/ C High reliability and stability of ±0. and ±0.5% Excellent pulse load capability Strong mechanical body due to cylindrical shape AEC-Q200 compliant RoHS and
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC1206 5%, 1%, 0.5%, 0.1% Product specification June 25, 2014 V.5. RoHS compliant
Product specification June 25, 2014 V.5 1100 DATA SHEET GENERAL PURPOSE CHIP RESISTORS 1206 5%, 1%, 0.5%, 0.1% RoHS compliant Product specification 2 SCOPE This specification describes 1206 series chip
More informationPrecision Thin Film Chip Resistor Array
and precision automotive grade thin film chip resistor arrays with convex terminations combine the proven reliability of discrete chip resistors with the advantages of chip resistor arrays. Defined tolerance
More informationSPECIFICATION FOR APPROVAL. 1/8W, 0402, Low Resistance Chip Resistor (Lead / Halogen Free)
DOCUMENT REVISION : SRK220000NH : A2 SPECIFICATION FOR APPROVAL PAGE : 1 OF 9 1/8W, 0402, Low Resistance Chip Resistor (Lead / Halogen Free) 1. Scope This specification applies to1.0mm x 0.5mm size 1/8W,
More informationType RN73 Series. Thin Film Precision Resistors. Electrical Characteristics. Key Features. Applications
Type RN73 Series Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Terminal finish electroplated 100% matte Sn Applications Communications Industrial Controls
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0603 5%, 1%, 0.5% RoHS compliant
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 0603 5%, 1%, 0.5% RoHS compliant Product specification February 05, 2013 V.6 Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%, 1% RoHS compliant & Halogen Free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes series chip
More informationDATA SHEET SURGE CHIP RESISTORS AUTOMOTIVE GRADE SR series 20%, 10%, 5% sizes 0402/0603/0805/1206/1210/1218/2010/2512
Product specification October 02, 2017 V.6 DATA SHEET SURGE CHIP RESISTORS AUTOMOTIVE GRADE SR series 20%, 10%, 5% sizes 0402/0603/005/1206/1210/121/2010/2512 RoHS compliant & Halogen free SR SERIES 0402/0603/005/1206/1210/121/2010/2512
More informationDATA SHEET SURGE CHIP RESISTORS AUTOMOTIVE GRADE SR series 20%, 10%, 5% sizes 0402/0603/0805/1206/1210/1218/2010/2512
Product specification September 27, 201 V.7 DATA SHEET SURGE CHIP RESISTORS AUTOMOTIVE GRADE SR series 20%, 10%, 5% sizes 0402/0603/005/1206/1210/121/2010/2512 RoHS compliant & Halogen free Product specification
More informationPRODUCT SPECIFICATION FOR IMFORMATION 151-SRJ-ET0601A ERJT
Subject Spec. No. PRODUCT SPECIFICTION FOR IMFORMTION 151-SRJ-ET0601 Part No. ERJT06 11-1 1. Dimension L a a -123 (1) (2) (3) (4) (5) (6) W (1) Substrate : lumina (2) Protective Coating : Resin (3) Resistive
More informationThin Film Ultra Precision Resistors
Type RU73 Series Key Features High precision - TCR 2ppm/ C and 3ppm/ C Tolerance down to 0.01% Thin film (nichrome) Available in standard and high power versions Terminal finish electroplated 100% matte
More informationDATA SHEET CURRENT SENSOR - LOW TCR HIGH POWER PT-High power series 5%, 2%, 1% sizes 0402/0603/0805/1206/0815/2010/2512
DATA SHEET CURRENT SENSOR - LOW TCR HIGH POWER PT-High power series 5%, 2%, 1% sizes 0402/0603/005/1206/015/2010/2512 RoHS compliant & Halogen free Product specification Product specification 2 PT-High
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC1218 (Pb Free) 5%; 1% Product specification Oct 13, 2004 V.1
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%; 1% 2 SCOPE This specification describes 1218 series chip resistors with lead-free terminations made by thick film process. ORDERING INFORMATION Part number
More informationSMD - Resistors. Pulse Withstanding Thick Film Chip Resistor-SMDP Series. Product: Size: 0603/0805/1206/1210/2010/2512. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: 0603///12// official distributor of 1. Scope Pulse Withstanding Thick Film Chip Resistor-SMDP Series -This specification applies to
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0603 5%, 1%, 0.5%, 0.1% Product specification July 01, 2014 V.5 Supersedes Date of Mar.
Product specification July 01, 2014 V.5 Supersedes Date of Mar. 06, 2003 DATA SHEET GENERAL PURPOSE CHIP RESISTORS 0603 5%, 1%, 0.5%, 0.1% RoHS compliant Product specification 2 hahah SCOPE This specification
More informationSelection Series: E24 & E96 E24 & E96 Temp. Coefficient (ppm/ C):
Thin Film Precision Resistors 1206 1210 Rated Power @ 70 C: 0.125W 0.2W Resistance Range (Ohms) Min: 4R7 4R7 4R7 1R0 4R7 1R0 4R7 4R7 4R7 1R0 4R7 1R0 Max: 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5
More informationSMD Resistor Networks
Product: Size: Thick Film Array Chip Resistor-SMRA Series 42x4 / 63x4 / 42x4(Concave) / 63x4(Concave) 42x8 official distributor of Thick Film Array Chip Resistor-SMRA Series 1. Scope -This specification
More informationSMD High Power Precision Resistors. Type RP73 Series
Type RP73 Series Key Features High precision - Tolerance down to 0.05% and TCR down to 5PPM Power rating to 1.0W Up to 200V DC operating Terminal finish electroplated 100% matte Sn Applications Communications
More informationA S J ASJ PTE LTD LEAD FREE THIN FILM CHIP RESISTOR SPECIFICATION. Reference No. : SYS-ENG-209. Revision No. : D
ASJ PTE LTD LEAD FREE THIN FILM CHIP Reference No. : SYS-ENG-209 Revision No. : D DOC NO: SYS-ENG-209 PAGE: 2 of 24 1.0 SCOPE...... 3 2.0 PART NUMBERING SYSTEM...... 3 3.0 RATING....... 3 3.1 Rated Power......
More informationDATA SHEET THIN FILM CHIP RESISTORS High precision - high stability RT series 0.01% TO 1%, TCR 5 TO 50 sizes 0201/0402/0603/0805/1206/ 1210/2010/2512
Product specification September 12, 2017 V. DATA SHEET THIN FILM CHIP RESISTORS High precision - high stability series 0.01% TO 1%, TCR 5 TO 50 sizes 0201/0402/0603/0805/1206/ 1210/2010/2512 RoHS compliant
More informationDATA SHEET SHUNT RESISTOR PU series 5%, 1% sizes 2512/ 3921/ 5931
Product specification November 23, 2017 V.4 DATA SHEET SHUNT RESISTOR PU series 5%, 1% sizes 2512/ 321/ 531 RoHS compliant & Halogen free Product specification 2 SCOPE This specification describes shunt
More informationDATA SHEET CURRENT SENSOR - LOW TCR AUTOMOTIVE GRADE PE_L series 5%, 1%, 0.5% sizes 0201/0402/ 0603/ 0805/ 1206/ 2010/ 2512
Product specification November 28, 2016 V.5 DATA SHEET CURRENT SENSOR - LOW TCR AUTOMOTIVE GRADE PE_L series 5%, 1%, 0.5% sizes 0201/0402/ 0603/ 0805/ 06/ 2010/ 25 RoHS compliant & Halogen free Product
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified
Spec. No.: RBX K HTS-1 /2 Date: 217. 4. 21 Data sheet Title: Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE RBX16,2,32,35 AEC-Q2 qualified RoHS COMPLIANCE ITEM Halogen
More informationSRM VDE. REG.-Nr. E932. Cap Diameter (D1, mm) Body Diameter (D2, mm)
D2 VDE REG.-Nr. E932 Specifications Per IEC 605- Features B L D IEC60065 & UL676 Compliant MELF packaging yet capable of high power handling Special conductive film enhances anti-surge capability. Absorbs
More informationMetal Foil Low Resistance Chip Resistor MFF Series
Page No. 1/8 Metal Foil Low Resistance Chip Resistor MFF Series Application Features Entertainment Low Resistance / TCR / EMF/Inductance Power supply Excellent long term stability Measuring instrument
More informationSurface Mounted Power Resistor Thick Film Technology
Surface Mounted Power Resistor Thick Film Technology DIMENSIONS in millimeters FEATURES AEC-Q200 qualified 25 W at 25 C case temperature Surface mounted resistor - TO-252 (DPAK) style package Wide resistance
More informationDATA SHEET ARRAY CHIP RESISTORS YC324 (8Pin/4R; Pb Free) 5%, 1% sizes Product specification Feb 22, 2005 V.1 Supersedes Date of Mar.
3 DATA SHEET ARRAY CHIP RESISTORS 324 (Pin/4R; Pb Free) 5%, 1% sizes 1220 Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes 324 series chip
More informationDATA SHEET SHUNT RESISTOR PU series 5%, 1% sizes 3921/ 5931
Product specification January 16, 2017 V.2 DATA SHEET SHUNT RESISTOR PU series 5%, 1% sizes 321/ 531 RoHS compliant & Halogen free Product specification 2 SCOPE This specification describes shunt resistor
More informationPulse Withstanding Chip Resistors
Construction 1 Alumina Substrate Features: Tolerance from ±0.5% to 5%. High power rating. Excellent pulse withstanding performance. Improved working voltage ratings. Standard package sizes of 0805 to 2512.
More informationZ LEAD SURFACE MOUNT SPECIFICATION AC AXIAL CEMENTED WIREWOUND RESISTOR & PR POWER METAL FILM RESISTORS
Z LEAD SURFACE MOUNT SPECIFICATION AC AXIAL CEMENTED WIREWOUND RESISTOR & PR POWER METAL FILM RESISTORS FEATURES Surface mounted version Low cost alternative for SMD molded resistor High power dissipation
More informationSurface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology FEATURES AEC-Q200 qualified 20 W at 25 C case temperature Surface mounted resistor - TO-263 (D 2 PAK) style package Wide resistance range from 0.01 to
More informationSMD High Power Precision Resistors. Type RP73 Series
Key Features High precision - Tolerance down to 0.05% and TCR down to 5PPM Power rating to 1.0W Up to 200V DC operating Terminal finish electroplated 100% matte Sn Applications Communications Industrial
More informationThin Film Current Sensing Chip Resistor (TCS Series)
(TCS Series) Features -Thin film process -High power rating up to 3 Watts in 2512 size -Tight tolerance down to ±0.5% -Extremely low TCR down to PPM/ C -Resistance values from 50m to 1ohm -High purity
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
Product specification December 12, 2018 V. DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/00/0201/0402/0603/0805/ 1206/12/1218/20/2512 RoHS compliant & Halogen
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
Product specification July, 2017 V.8 DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/00/0201/0402/0603/0805/ 1206/12/1218/20/2512 RoHS compliant & Halogen free Product
More informationData Sheet. Chun Ann J.C Liu. Customer: Thin Film Precision Chip Resistor - AR Series. Checked. Product :
Data Sheet Customer: Product : Thin Film Precision Chip Resistor - AR Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: 19-Aug-10 Edition : REV.C6 Produced by Checked Approved by Prepared
More information(HVR) Thick Film High Voltage Chip Resistors. Token Electronics Industry Co., Ltd. Version: February 13, Web:
Version: February 13, 2017 (HVR) Thick Film High Voltage Chip Resistors Token Electronics Industry Co., Ltd. Web: www.token.com.tw mailto: Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei
More informationDATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/005/ 1206/1210/121/2010/2512 Product specification June 07, 2017 V.0 Product specification 2 SCOPE This specification
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0603 (Pb Free) 5%, 1%
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%, 1% Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes 0603 series chip resistors with lead-free
More informationDATA SHEET CURRENT SENSOR - LOW TCR PE Series - Wide Terminal 5%, 1%, 0.5%
Product specification December 03, 2018 V.0 Supersedes Date of Mar. 06, 2003 DATA SHEET CURRENT SENSOR - LOW TCR PE Series - Wide Terminal 5%, 1%, 0.5% RoHS compliant & Halogen free Product specification
More informationLow Resistance Flat Chip Resistors Type SR73
Low Resistance Flat Chip Resistors Type SR73 1. Scope This specification applies to chip resistors (SR73) produced by KOA Corporation. CERTIFIED AHA 9/29/11 CERTIFIED 2. Type Designation The type designation
More informationData Sheet. Customer: Product: Automotive Grade Thick Film Array Chip Resistor CN..A Series 0402x4 / 0603x4 / 0201x2(Flat) / 0201x4(Flat)
Data Sheet Customer: Product: CN.. Series Size: Issued Date: Edition: 0402x4 / 0603x4 / 0201x2(Flat) / 0201x4(Flat) 15-Jul-16 REV.4 VIKING TECH CORPORTION 光頡科技股份有限公司 No.70 Guangfu N. Rd., Hukou Township,
More informationPrecision Thin Film Chip Resistor Array Superior Moisture Resistivity
, - Precision Precision Thin Film Chip Resistor Array Superior Moisture Resistivity and precision automotive grade thin film chip resistor arrays with convex terminations combine the proven reliability
More informationGENERAL PURPOSE CHIP RESISTORS RC0805 5%, 1%, 0.5%, 0.1% RoHS Compliant & Halogen Free.
GENERAL PURPOSE CHIP RESISTORS RC080 %, 1%, 0.%, 0.1% RoHS Compliant & Halogen Free Product specification - July 26, 2016 V0 SCOPE Chip Resistor Surface Mount RC SERIES 080 This specification describes
More informationFUSIBLE RESISTOR - NFR25H
FUSIBLE RESISTOR - FEATURES Metal film technology Suitable for protection of circuit boards and designs Overload protection without risk of fire Defined interruption behavior (fusing time) Wide range of
More informationDATA SHEET THIN FILM CHIP RESISTORS AUTOMOTIVE GRADE AT series 0.1% TO 1%, TC 15 TO TC50 sizes 0402/0603/0805/1206
Product specification October 24, 2017 V.5 DATA SHEET THIN FILM CHIP RESISTORS AUTOMOTIVE GRADE AT series 0.1% TO 1%, TC 15 TO TC50 sizes 0402/0603/0805/1206 RoHS compliant Product specification 2 SCOPE
More informationDATA SHEET CURRENT SENSOR - LOW TCR PA0603 series 5%, 1% sizes 0603
Product specification February 14, 2018 V.0 DATA SHEET CURRENT SENSOR - LOW TCR PA0603 series 5%, 1% sizes 0603 RoHS compliant & Halogen free Product specification 2 SCOPE This specification describes
More informationsizes , 4 x 0402, 2 x 0603, 4 x 0603 RoHS compliant
Product specification June 2, 2016 V.4 DATA SHEET ANTI-SULFURATED CHIP RESISTORS 122 (4Pin/2R) / 124 (Pin/4R) / 162 (4Pin/ 2R)/ 164 (Pin/ 4R) 5%, 1% sizes 2 0402, 4 x 0402, 2 x 0603, 4 x 0603 RoHS compliant
More informationPulse Proof, High Power Thick Film Chip Resistors
Pulse Proof, High Power Thick Film Chip Resistors -HP e3 STANDARD ELTRICAL SPIFICATIONS SIZE LIMITING POWER RATING ELEMENT MODEL P 70 INCH METRIC W VOLTAGE MAX. V FTURES Excellent pulse load capability
More informationZCM Series Datasheet. SMD Precision Metal Film Resistors MELF Style APPLICATIONS. ORDERING CODE-Example FEATURES ELECTRICAL SPECIFICATIONS
AEC - Q200 Qualified ZCM Series Datasheet SMD Precision Metal Film Resistors MELF Style ORDERING CODE-Example New SAP Part Nr.: ZCM 207 F K E 07- K AA Serie rating Tol. Pack-Code TCR Forming type R Value
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS. RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/00/0201/0402/0603/0805/ 1206/12/1218/20/2512 RoHS compliant & Halogen free Product specification January 21, 2015
More informationType CRG Series THICK FILM CHIP RESISTORS. Electrical Characteristics. Power rating: Key Features
Key Features Type CRG Series Thick Film Resistors with high power to size ratio, ideally suited to industrial and general purpose use Value range from Ω to MΩ Eight package sizes Terminal finish matte
More informationPrecision Thin Film Precision Resistors
Key Features Thin film precision resistors with TC's of 15ppm, 25ppm and 50ppm and tolerances to 0.1%. Applications in measurement, telemetry and for sensing circuits. Case sizes 0402, 0603, 0805, 1206,
More informationFrelTec GmbH. Current Sensing Chip Resistor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 6/8/2015 1/13 Freltec GmbH www.freltec.com SPECIFICATION Part Number 017 05 * R001 * J * T05 ** D E Size Value Tolerance Packing TCR Power Rating 017
More informationDATA SHEET FUSIBLE CHIP RESISTORS FR series (Pb Free) 5% sizes 0603/1206. Product specification Sep 26, 2005 V.0
DATA SHEET FUSIBLE CHIP RESISTORS series (Pb Free) 5% sizes 0603/1206 2 Chip Resistor Surface Mount SCOPE This specification describes 0603/1206 fusible chip resistors with leadfree terminations made by
More informationThick Film Chip Resistor
Features: Small size and light weight. Highly reliable multilayer electrode construction. Compatible with all soldering process. Construction 1 Alumina Substrate 2 Bottom Electrode (Ag-Pd) 3 Top Electrode
More informationAutomotive Anti-sulfur
utomotive nti-sulfur Feature EC-Q200 Qualified. STM 809-95 satisfied. Excellent anti-sulfur performance. Lead-free terminal (matt tin) RoHS complaint with exemption. pplication Electronic Control Units
More informationDATA SHEET CURRENT SENSOR - LOW TCR PA0402 series 5%, 1% sizes 0402
Product specification March 23, 2017 V.0 DATA SHEET CURRENT SENSOR - LOW TCR PA0402 series 5%, 1% sizes 0402 RoHS compliant & Halogen free Product specification 2 SCOPE This specification describes PA0402
More informationPRODUCT SPECIFICATION FOR APPROVAL
Digi-Key Issue No. : 151ERA1111 Date of Issue : February 15.211 Classification : New Changed PRODUCT SPECIFICATION FOR APPROVAL Product Description Product Part Number : Metal Film (Thin Film)Chip Resistors
More informationSurge Withstanding Thick FilmResistors(SWCR Series)
Surge Withstanding Thick FilmResistors(SWCR Series) Features: Excellent surge and pulse withstanding performance Higher power rating than General Purpose Thick Film Resistors Offered in to sizes RoHS &
More informationThin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC1206 5%, 1%
1100 DATA SHEET GENERAL PURPOSE CHIP RESISTORS 1206 5%, 1% RoHS compliant Product specification Jul 02, 200 V.4 Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes
More informationCHIP RESISTOR NETWORKS 1/14. Series SPECIFICATION PRODUCTS: CHIP RESISTOR NETWORKS TYPE: MNR12 RAP SERIES ROHM CO.
CHIP RESISTOR NETWORKS Series SPECIFICATION PRODUCTS: CHIP RESISTOR NETWORKS 1/14 TYPE: MNR12 RAP SERIES ROHM CO., LTDRESISTOR DIV CHIP RESISTOR NETWORKS Series < Specifications (Precautions and Prohibitions)
More informationDATA SHEET CURRENT SENSOR - LOW TCR PR/PF series (Pb Free) 5%, 1% sizes 1206/2010/2512. Product specification Aug 11, 2005 V.0
h DATA SHEET CURRENT SENSOR - LOW TCR series (Pb Free) 5%, 1% sizes 1206/2010/2512 2 SCOPE This specification describes series current sensor - low TCR with lead-free terminations. ORDERING INFORMATION
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC1218 5%, 1% RoHS compliant
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 121 5%, 1% RoHS compliant Product specification Jul 15, 200 V.2 Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes 121
More informationDATA SHEET FUSIBLE CHIP RESISTORS FR series (Pb Free) 5% sizes 0603/1206. Product specification Sep 26, 2005 V.0
DATA SHEET FUSIBLE CHIP RESISTORS series (Pb Free) 5% sizes 0603/1206 Product specification Product specification 2 SCOPE This specification describes 0603/1206 fusible chip resistors with leadfree terminations
More informationDATA SHEET LOW OHMIC CHIP RESISTORS RL series 5%, 2%, 1% sizes 0402/0603/0805/1206/ 1210/1218/2010/2512
Product specification June 01, 2017 V.2 DATA SHEET LOW OHMIC CHIP RESISTORS RL series 5%, 2%, 1% sizes 0402/0603/0805/1206/ 1210/1218/2010/2512 RoHS compliant & Halogen Free Product specification 2 SCOPE
More informationTHICK FILM CHIP RESISTOR Anti-Sulfurated RCA0402~RCA2512
THICK FILM CHIP RESISTOR Anti-Sulfurated RCA0402~RCA2512 Thick Film Chip Resistor Anti-Sulfurated Features High performance to prevent Sulfuration in a Sulfur containing environment Small Size and light
More informationDATA SHEET HIGH VOLTAGE CHIP RESISTORS RV series 5%, 1% sizes 0805/1206/2512. RoHS compliant
DATA SHEET HIGH VOLTAGE CHIP RESISTORS series 5%, 1% sizes 005/1206/2512 RoHS compliant Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes
More informationDATA SHEET HIGH OHMIC CHIP RESISTORS RC high ohmic series 20%, 10%, 5% sizes 0805/1206. RoHS compliant
DATA SHEET HIGH OHMIC CHIP RESISTORS RC high ohmic series 20%, 10%, 5% sizes 005/1206 RoHS compliant Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification
More informationLR Series. Construction. Application. Features
Metal Alloy Low-Resistance Resistor LR Series Construction Application Power supply Battery pack DIY tools Inverter/Converter (AC/DC, DC/DC, DC/AC) Measurable instrument Consumer electronics Note book
More information