Turn to the News. Inside this issue: Highlights

Similar documents
Highlights Inside this issue: August 12th See page 9 for directions

Chips & Bits. Peace River Woodturners. A chapter of the American Association of Woodturners. Meeting Announcements

the 360 Volume 25 Issue 1 January 2017 WCWT Christmas Party 2016

Volume 16, Issue 8 August, 2007 August Demo By Vera Pfifferling

Between Turns. Sharpening..In s & Outs. New Mentoring Update. Michigan Association of Woodturers A chapter of the American Association of Woodturners

Between Centers Club established

Your continuing efforts to the timely returning of resources are appreciated. Regards, Dave Hawley FRW Librarian. Did You Know?

Between Centers Club established

ECHOES FROM THE BAT CAVE

Minutes/Newsletter of Space Coast Woodturners January 14, 2015

Between Turns. July Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

Turning Christmas Ornaments

March 2, 2018 Demo. Nick Agar. Turning a Lidded Bowl with Finial. Join us at the Bemis School of Art

Alabama Woodturners Association

Between Centers Club established

Buckeye Woodworkers and Woodturners

Alabama Woodturners Association

Between Centers Club established

WOODTURNERS OF ST. LOUIS

Echoes from the BAT. Inside this month s BAT Cave. Details inside. Bill Henry Kicks off October Meeting. November 50/50 Raffle One Lucky Winner

NOR-CAL SHAVINGS Newsletter of Nor-Cal Woodturners, Inc. A Non-Profit Corporation and AAW Affiliate

TIDEWATER TURNER. August demonstrator: Steve Humus MEETING AT 6:30PM NOW!!! President: J Farrell Vice President: Sam Warren

ECHOES FROM THE BAT CAVE

The Turning Point. The newsletter of the Siouxland Woodturners Chapter of the American Association of Woodturners


The MUSHROOM The Newsletter of the ADIRONDACK WOODTURNERS ASSOCIATION Volume 6, No. 12 December 2006

Finger Lakes Woodturners II a Special Interest Group of the Rochester Woodworkers Society

Minutes/Newsletter of Space Coast Woodturners April 8, 2015

Chips & Bits. Peace River Woodturners. Meeting Announcements. Larry Fox at the lathe. Larry Fox Demo

WOODTURNERS. Providing Woodturning Education, Assistance and Experience to the Miami-Dade Community

INLAND NORTHWEST WOODTURNERS NEWSLETTER. May Meeting 2008

The South Central Penn Turner Newsletter of the South Central Pennsylvania Woodturners, June-July 2006

Minutes/Newsletter of Space Coast Woodturners June 14, 2017

CHAPTER NEWSLETTER 2014 Issue 10 PROMOTING INTEREST IN WOOD TURNING

All the News That Will Fit On the Lathe

Wood Chips LOCAL AAW CHAPTER

Dave Lancaster will be having an Open Shop at his place from 3:00 PM to 6:30 PM before the meeting.

May 2013 Embellishment Erskine Academy, 309 Windsor Road (route 32), South China, Maine Show & Tell photos and For Sale table at 6:30 PM

The newsletter of the Siouxland Woodturners. A Chapter of the American Association of Woodturners

Northwest Woodworkers Association

Kris Coyan s Steps to Make a 2-Piece Inside-Out Ornament: 1) Find (2) pieces of wood that have at least two parallel surfaces (such as pen blanks

Western Piedmont Woodcrafters. Application for Membership

THE SAWDUST. Meeting Time. Volume 14, Issue 6 June 2007

Jam Chucks and Holding devices

MANY GOOD TURNS CHAPTER OF THE AMERICAN ASSOCIATION OF WOODTURNERS

Offset turning female form

CICAAW NEWSLETTER. Website CICAAW.org. What s Inside This Issue. Central Indiana Chapter of the American Association of Woodturners March 2018

Tristan s Corner: Hopefully everyone stayed dry last month! I think we might get some drier weather soon.

ECHOES FROM THE BAT CAVE

One Good Turn. Coulee Region Woodturners. Chapter of the American Association of WoodTurners.

Editors: Bob Jarrett, & Dick Webber, Charles Waggoner, photographer

Between Turns. May Stump The Pro... Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

Between Turns. April 2012 MAW Meeting. Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

The Monthly Newsletter of the Windy City Woodturners

Buckeye Woodworkers and Woodturners

TIDEWATER TURNER MERRY CHRISTMAS MEETING AT 6:30PM NOW!!! Next Membership Meeting January, 24 6:30PM. Next Shop Talk January 19, 6:30PM

A Chapter of the American Association of Woodturners

Between Turns. March Burning Demonstration... Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

Christmas Party. December The monthly newsletter of the Inland Woodturners

Hollow Turning with Randy Zelenka

GOOD TURNS. October has been a very busy month and it hardly seems. November 2007 W O O D T U R N E R S. President s Message.

Northwest Woodworkers Guild

Meeting Announcement: Date: June 8, 2000 Time: 6:30 9:30 PM Place: Woodcraft Supply 6123 Backlick Rd.. Springfield, VA 22150

The Monthly Newsletter of the Windy City Woodturners

August Program: Warren Carpenter

CLUB CALENDAR Our next general meeting will be March 8th, 2014 at BOCES at 9:00 am.

Echos From the BAT. Cave. Woodworking Show. Baltimore Area Turners. Inside this issue: Woodworking Show 2 Show and Tell 3 Gallery 5 Other Stuff 6

Finger Lakes Woodturners A Chapter of The American Association of Woodturners

The Turning Point The newsletter of the Siouxland Woodturners Chapter of the American Association of Woodturners

THE WOODTURNER. FebruaryDemonstration Making Jewelry on the Lathe CHAS THORNHILL DEMONSTRATOR

September 2015 In this issue: Sept. Meeting/Program...1 Presidents Message...2

One Good Turn. Coulee Region WoodTurners. Chapter of the American Association of WoodTurners.

The Nutmeg. Newsletter of the Nutmeg Woodturners League Established June 14, NEXT MEETING March 13, 2017

Cumberland Woodturners

Flint Hills WOODTURNERS. May 2015

WOODWORDS ON THE BRANDYWINE

THE OFFICIAL NEWSLETTER OF THE CASCADE WOODTURNERS. August 2011

THE SKEWED VIEW. Our previous meeting was April 14th at Dawson s Shop. Our MAY Meeting/Picnic is at Bob Horn s (see pg 5 & 6 )

Western Piedmont Woodcrafters. Application for Membership

South Central Pennsylvania Wood Turners Club

Monthly Meeting & Carve In Saturday October 20th

February 6th Demonstration Jim Tanksley will demonstrate making natural edge end grain Mesquite bowls

Finger Lakes Woodturners A Chapter of The American Association of Woodturners

The Turning Point The newsletter of the Siouxland Woodturners Chapter of the American Association of Woodturners

Chattahoochee Woodturners Newsletter

July 19. Newsletter of the Treasure Coast Woodturning Guild June In this issue:

Image Item Model Price. Salt mill Mechanism Kit NO ROD INCLUDED (USA) Woodturning Kit Chrome Bottle Opener Kit (Woodturning) 07045

The Triangle Woodturner

Northwest Woodworkers Guild

MICHIGAN WOODWORKER. michiganwoodworkersguild.com Michigan Woodworkers Guild (est. 1981) October 2018 Vol. 39 No. 9

September 2 nd Demonstration

BEST Wishes for a Happy Thanksgiving Day. Jottings for the November Meeting

CICAAW Turnings. Next month, Jim Dupler is going to mystify us with a tool handle creation demo.

The Wood Spinner. ...and a good time was had by all. this issue. Central Virginia Wood Turners


the 360 Volume 25 Issue 4 April 2017 Roberto Ferrer made a complex process seem simple The March Demonstration: Carving on the Lathe How is this done?

North Alabama Woodturners Newsletter A registered AAW chapter Edition 18-09

CENTRAL OHIO WOODTURNERS April 2004

January Demo > Walt Ahlgrim Open Spiral Candle Stick. January 2017

November - December 2018

Transcription:

A monthly publication of the Pre sque Isle Wo odturners Turn to the News Volume 1 Issue 11 November 2016 Highlights Elections Inside this issue: Presidents Message 1 FIY 2 Library News 3 Activity Calendar 3 Board Contacts 4 About PIW 5 Around the Web 5 Resources 6 Pictures 7 Icicle Snowman 8 A big thank you goes out to Dick Cropp for his demo this month on making Christmas ornaments. Dick has demonstrated many times for the club and his demos are always fact filled and enjoyable. For those of you who might have missed the demo, Dick showed us how to make a globe ornament complete with finials on both ends. He showed us a rather unique way to hollow the globe. Most folks use a bent hollowing tool very much like that that Bob Rosand uses. However, Dick used a Dremmel tool with a small burr to do the job. It was very efficient and got the job done very quickly. Thanks, Dick!! Next Month s demo will be provided by Dave Swanson; topic to be announced at the meeting. We still need at least two additional members to fill out the Elections committee. We need someone to run for President and Member at Large. As I mentioned last year when I assumed the Presidency, I am not going to create another Dynasty here at PIW and someone would need to step up the following year to keep the club going. That time is now and someone needs to volunteer to do the job. It s not that difficult of a job; the main duties are: writing the President s message, attending the board meetings when they are called, coming up with volunteers to do the monthly demos. I am willing to help with the finding demos part of the job. Without a president, the club cannot continue. The Pittsburgh turning club will be hosting Nick Agar for an all-day demo in February. The cost, I believe, is $30.00 in advance and $35.00 at the door. If anyone is interested in going or might need additional information, please contact Dave Bitler at dabetler@gmail.com. We had Nick at the club last year and he provided an excellent demonstration and hands-on following. Dues are due now. John Fox, our Treasurer, would prefer a check so information doesn t get lost. If many people shove cash at him all at once at a meeting, it s sometimes difficult to make sure that the correct accounts get credited; that s not an issue with a check. He also has a form to fill out so we can update our club roster with email addresses, addresses and phone numbers. With the way the weather has been for the past several years, the Board has kicked around the idea of not having a meeting during January, February, and March. What do you think of that proposal? For those of you who live near Shorty s Garage, that is not much of an issue; however, we have many members who drive quite a distance to attend, and, for them, it is an issue. We will discuss this at the next meeting. Joe

PAGE 2 TURN TO THE NEWS VOLUME 1 ISSUE 11 FYI Member Projects If you have a woodturning project that you would like to showcase to our club members, you can send me detailed information about your project with pictures. Members Questions & Answers Members are asked to submit woodturning, finishing and tool questions to our resident experts to answer. There are no dumb questions, someone else in the club may have had the same questions. Classified Ads Ads for woodturning and woodworking related items are free to members. Send detailed information with pictures. Wood to Turn Do you have wood, need wood or know about wood that is available for turning? Let me know and I ll pass it along. Classifieds Jet Dust Collector $550.00 Remote control (on and off) $50.00 Jet 1 1 2 HP, 1100 CFM, Model # DC1100-A, 120/240 Volt in excellent condition. Originally came with a cloth filter bag, 30 microns but upgraded to a pleated It is pre wired for a 120-volt circuit but can rewired to a 240 volt if desired. be Also available is a remote control to turn on and off the dust collector. Contact Ron Tomasch (ronswoodshop@hotmail.com) or phone: 216-214-1959

PAGE 3 TURN TO THE NEWS VOLUME 1 ISSUE 11 Library News One of the greater assets of PIW is the extensive library of tapes, DVDs, books, and reference materials available in the club library. If you have not already done so, take a few moments and browse through the materials. Materials are offered on an honor system. Please sign the card attached to the desired item and place it in the Library black box. When you return the item, retrieve the card from the box, cross out your name and place Latest Additions See Bill Noce for more informartion PIW Activities calendar????? November 2nd Election December 7th

PAGE 4 TURN TO THE NEWS VOLUME 1 ISSUE 11 PIW Board 2015 and Elected Officers President Joe Herrmann latheturner@windstream.net 440-563-5785 Treasurer & Club Photographer John Fox john@johnfox.us 814-434-3445 In place of Past President Vice-president Don Proctor h2opolo@roadrunner.com 814-449-1902 Elected Board Member Bill Noce nocnoc@zitomedia.net 440-997-8908 Craig McCune Secretary craig_mccune@roadrunner.com 814-833-7409 Elected Board Member Jim Meyer blossomandjimbo@adelphia.net 814-474-5106 Mentor Contacts Dave Swanson Bill Blasic John Fox: 7279 Rohl Road, North East,PA 16428 814-899-5175 11291 Lake Pleasant Rd. Union City PA 16438 814-796-4609 176 Cambridge Road, Erie, Pa 16511 814-434-3445 For new turners and those looking to expand their skills, PIW has established a Mentor List of those members willing to assist in that effort. Please make arrangements directly with anyone on the list for help.

PAGE 5 TURN TO THE NEWS VOLUME 1 ISSUE 11 For contact information updates, including your email or mailing address, please contact Terry at piwnewsletter@gmail.com AAW Quick Links About PIW Presque Isle Woodturners Inc. is affiliated with the American Association of Woodturners and is organized exclusively for educational purposes with a mission to educate woodturners and the public, in and about the art and craft of woodturning. This is accomplished by encouraging and facilitating training programs for woodturners, disseminating information about sources of material and equipment, exposing the art of woodturning to the general public, and serving as a resource for any group or individual interested in woodturning. Presque Isle Woodturners was originally organized in 1999 by a small group of individuals with a common interest in woodturning. The PIW has grown to a group of over 50 members and became incorporated as a nonprofit organization in 2003. The sharing of experience between members, presentations by invited woodturners of regional and national reputation, and an extensive library of books and videos on the subject of turning are benefits of membership. Topics covered at any meeting may include turning technique, design, safety, finishing methods, and ideas for projects. Meetings are held the first Wednesday of each month at 2831 West 23rd St. (Behind Parker s Garage) at 6:00 PM. Visitors are welcome any time, join us. Site of the Month Woodturning Videos This site hosts hundreds of woodturning videos on just about any subject.

PAGE 6 TURN TO THE NEWS VOLUME 1 ISSUE 11 Woodturning Resources American Association of Woodturners Woodturning Association Tools and Supplies Bear Tooth Woods Specialty pen kits Best Wood Tools Specialized woodturning tools Craft Supply Woodturning Supplies Craft ID Signature medallions Earth s Watch Wooden jewelry and watches Franck Johannesen Woodturning Geiger s Solutions Robust Lathes and accessories Klingspor Abrasives and woodturning supplies Highland Woodworking Woodworking tools, supplies Hunter Tool Systems Carbide woodturning tools Hut Products Woodturning tools, supplies John Jordan Woodturning Woodturning tools and more JT Turning Tools Woodturning tools & accessories OneWay Manufacturing Lathes and accessories Packard Woodturning Supplies Peachtree Woodworking Supply Turning and carving tools, suplies Penn State Woodturning tools, supplies Rockler Woodworking and Hardware Ron Brown s Best Woodturning tools and videos Sanding Glove Abrasives and sanding equipment SS Niles Bottle Stoppers Stainless steel bottle stoppers Thompson Lathe Tools High quality steel woodturning tools Vinces WoodNWonders Sanding products Woodcraft of Atlanta Woodworking and Hardware Woodturners Wonders Lathe lamps & CBN wheels Woodturningz Pen kits and woodturning supplies Magazines More Woodturning Woodturning magazine Woodturning The British woodturning magazine Wood magazine Forum Wood Magazine Q & A on Woodturning Websites Woodturning Videos Excellent woodturning videos Wood Sources AustralianBurls Burls from Australia Bell Forest Figured and Exotic woods Big Monk Lumber Exotic woods Century Tree Turnings Woodturning blanks Got Wood? Source of Wood turning blanks from Piedmont area of South Carolina Hardwoods Incorporated Specialty Hardwoods Let me know if you have a favorite site to add to this list.

PAGE 7 TURN TO THE NEWS VOLUME 1 ISSUE 11 Photos by John Fox

PAGE 8 TURN TO THE NEWS VOLUME 1 ISSUE 11 By Permission of AAW

PAGE 9 TURN TO THE NEWS VOLUME 1 ISSUE 11 By Permission of AAW

PAGE 10 TURN TO THE NEWS VOLUME 1 ISSUE 11 By Permission of AAW