Set-Screw onnectors Regular Insulated I5404 (-IT) / I5408 (-IT) Steel Locknut I5004 (-IT) / I5008 (-IT) I5020 (-IT) / I5032 (-IT) I5410 (-IT) / I5432 (-IT) Steel Locknut I5010 (-IT) / I5016 (-IT) I5054 / I5058 Set-Screw onnectors (Steel) I5404 I5404-IT 1/2 I5406 I5406-IT 3/4 I5408 I5408-IT 1 I5410 I5410-IT 1-1/4 I5412 I5412-IT 1-1/2 I5416 I5416-IT 2 I5420 I5420-IT 2-1/2 I5424 I5424-IT 3 T-129-S T-729 3-1/2 I5432 I5432-IT 4 Set-Screw onnectors (Zinc lloy) I5004 I5004-IT 1/2 I5006 I5006-IT 3/4 I5008 I5008-IT 1 I5010 I5010-IT 1-1/4 I5012 I5012-IT 1-1/2 I5016 I5016-IT 2 I5020 I5020-IT 2-1/2 I5024 I5024-IT 3 T-229-S T-829-S 3-1/2 I5032 I5032-IT 4 oncrete-tight. Models from 2-1/2" to 4" are also suitable for rigid and IM conduit. Offset Set-Screw Offset ody onnectors (Zinc lloy) I5054 1/2 3/8 I5056 3/4 3/4 I5058 1 3/4 oncrete-tight. 17
Set-Screw ouplings (Zinc lloy) (Steel) Set-Screw ouplings I5504 / I5508 I5104 / I5108 I5120 / I5132 I5104 I-5504 1/2 I5106 I-5506 3/4 I5108 I-5508 1 I5110 I-5510 1-1/4 I5112 I-5512 1-1/2 I5116 I-5516 2 I5120 I-5520 * 2-1/2 I5124 I-5524 * 3 TK-229 S TK-129 3-1/2 I5132 I-5532 4 oncrete-tight. Models from 2-1/2" to 4" are also suitable for rigid and IM conduit. * Not S certified Rigid / Rigid ouplings (Zinc lloy) I5510 / I5532 I5164 / I5168 I5164 1/2 1/2 I5166 3/4 3/4 I5168 1 1 oncrete-tight. I5110 / I5116 lamping Range Flex min. max. / Flex. ouplings (Zinc lloy) I5153 1/2 3/8 0.17 0.63 I5154 1/2 1/2 0.75 0.95 I5153 I5154 18
ompression onnectors and ouplings ll compression connectors and couplings are concrete-tight. Models from 1/2 to 2 are also raintight. Models from 2-1/2 to 4 are also suitable for rigid and IM conduit. I5604 (-IT) / I5632 (-IT) Steel Locknut I5704 / I5732 I5804 (-IT) / I5832 (-IT) Regular Insulated Regular Insulated (Zinc lloy) (Steel) ompression onnectors I5804 I5804-IT I5604 I5604-IT 1/2 I5806 I5806-IT I5606 I5606-IT 3/4 I5808 I5808-IT I5608 I5608-IT 1 I5810 I5810-IT I5610 I5610-IT 1-1/4 I5812 I5812-IT I5612 I5612-IT 1-1/2 I5816 I5816-IT I5616 I5616-IT 2 I5820 I5820-IT I5620 I5620-IT 2-1/2 I5824 I5824-IT I5624 I5624-IT 3 I5832 I5832-IT I5632 I5632-IT 4 (Zinc lloy) (Steel) ompression ouplings I5904 I5704 1/2 I5906 I5706 3/4 I5908 I5708 1 I5910 I5710 1-1/4 I5912 I5712 1-1/2 I5916 I5716 2 I5920 I5720 2-1/2 I5924 I5724 3 I5932 I5732 4 I5904 / I5932 TL-291 / TL-292 apped orner ouplings TL-291 1/2 TL-292 3/4 onnector - 90 - ompression Type T-911-S 1/2 T-912-S 3/4 T-911-S / T-912-S TO-211-S / Offset Offset onnector - ompression Type TO-211-S 1/2 3/8 19
ccessories Max. Dia. Hole I1304 / I1316 One Hole Straps (Galvanized Steel) I1304 1/2 0.71 1/4 I1306 3/4 0.92 1/4 I1308 1 1.16 5/16 I1310 1-1/4 1.51 7/16 I1312 1-1/2 1.74 7/16 I1316 2 2.20 9/16 I1404 / I1416 Two Hole Straps (Galvanized Steel) I1404 1/2 0.71 3/16 I1406 3/4 0.92 3/16 I1408 1 1.16 3/16 I1410 1-1/4 1.51 1/4 I1412 1-1/2 1.74 1/4 I1416 2 2.20 3/8 I1520 2-1/2 2.88 3/8 I1524 3 3.50 3/8 I1528 3-1/2 4.00 1/2 I1532 4 4.50 1/2 I1520 / I1532 Jaw Tap ase Dimensions Opening and ack Jaw Opening eam lamps (Malleable Iron) IM-02 1/4N 15/16 1/4-20 1 1-1/4 1-7/16 IM-03 5/16N 7/8 5/16-18 1-9/16 1-9/161-11/16 IM-04 3/8N 1 3/8-16 2 1-7/8 1-3/4 IM-05 1/2N 1 1/2-13 2-1/2 2-3/8 2-3/8 Rigid Rigid IM-02 / IM-05 IH-0404 / IH-3232 onduit Hangers-Steel (with nuts & bolts) IH-0404 1/2 1/2 IH-0606 3/4 3/4 IH-0808 1 1 IH-0010 1-1/4 IH-1012 1-1/2 1-1/4 IH-1200 1-1/2 IH-1616 2 2 IH-2020 2-1/2 2-1/2 IH-2424 3 3 IH-2828 3-1/2 3-1/2 IH-3232 * 4 4 * Not S certified onduit Hangers-Steel (without nuts & bolts) 6H0 1/2 3/8&1/2 6H1 3/4 3/4 6H2 1 1 6H2-1/2 1-1/4 6H3-S 1-1/2 1-1/4 6H4 1-1/2 6H5 2 2 6H6 2-1/2 2-1/2 6H7 3 3 6H8 3-1/2 3-1/2 6H9 * 4 4 * Not S certified 20
Pull Elbows and onduit Fittings Dimensions Pull Elbows, to ox (Zinc lloy) I5204 1/2 1-5/16 1-1/8 I5206 3/4 1-1/2 1-1/4 I5204 / I5206 Pull Elbows, to (Zinc lloy) I5304 1/2 1-5/16 15/16 I5306 3/4 1-5/8 1-1/4 I5308-G 1 1-15/16 1-5/8 I5310-G 1-1/4 2-1/4 2 onduit Fittings - Type (ast luminum) I5304 / I5306 I5308-G / I5310-G -G: with gasket. I-1/2 / I-2 I-1/2 1/2 4-7/8 1-3/8 1-3/8 I-3/4 3/4 5-9/16 1-1/2 1-7/16 I-1 1 6-1/2 1-3/4 1-3/4 I-1-1/4 1-1/4 8-5/8 1-15/16 2-1/2 I-1-1/2 1-1/2 8-5/8 2-11/16 2-1/2 I-2 2 10-15/16 3 3-3/16 onduit Fittings - L Type (ast luminum) IL-1/2 1/2 4-5/16 1-1/2 1-3/8 IL-3/4 3/4 4-15/16 1-7/8 1-9/16 IL-1 1 6-1/16 2-1/16 1-13/16 IL-1-1/4 1-1/4 7-7/8 2-15/16 2-1/2 IL-1-1/2 1-1/2 7-7/8 3-1/16 2-1/2 IL-2 2 10 3-3/4 3-3/16 ILS-2-1/2 2-1/2 13 7-3/8 4-1/4 ILS-3 3 13 7-3/8 4-1/4 ILS-3-1/2 3-1/2 15-1/4 9 5-1/4 ILS-4 4 15-1/4 9 5-1/4 overs and gaskets are included with all aluminum conduit fittings. Types I and IL are also suitable for use with rigid conduit. IL-1/2 / IL-2 ILS-2-1/2 / ILS-4 21
onduit Fittings, ccessories and Entrance Heads Dimensions onduit Fittings - LRL Type (ast luminum) ILRL-1/2 / ILRL-2 Supplied with 2 covers. ILRL-1/2 1/2 4-7/16 1-11/16 2-1/8 ILRL-3/4 3/4 5-3/16 1-7/8 2-1/4 ILRL-1 1 6 2-3/16 2-1/2 ILRL-1-1/4 1-1/4 7-15/16 2-3/4 3-1/2 ILRL-1-1/2 1-1/2 7-15/16 3-1/4 3-1/2 ILRL-2 2 10-3/16 3-11/16 4-1/8 onduit Fittings - T Type (ast luminum) IT-1/2 1/2 4-7/8 1-3/8 2-1/16 IT-3/4 3/4 5-9/16 1-3/4 2-1/8 IT-1 1 6-1/2 2 2-1/2 IT-1-1/4 1-1/4 8-11/16 2-5/8 3-1/2 IT-1-1/2 1-1/2 8-11/16 3 3-9/16 IT-2 2 10-7/8 3-1/4 4-3/16 overs and gaskets are included with all aluminum conduit fittings. Types ILRL and IT are also suitable for use with rigid conduit. IT-1/2 / IT-2 lank overs for luminum onduit Fittings (Stamped luminum) I-1/2 1/2 I-3/4 3/4 I-1 1 I-1-1/4 1-1/4 I-1-1/2 1-1/2 I-2 2 Gaskets for luminum onduit Fittings (Neoprene) IG-1/2 1/2 IG-3/4 3/4 IG-1 1 IG-1-1/4 1-1/4 IG-1-1/2 1-1/2 IG-2 2 IG-1/2 / IG-2 I-1/2 / I-2 IEFS-1/2 / IEFS-4 onsult page 11 for technical specifications Service Entrance Heads (ast luminum) IEFS-1/2 1/2 IEFS-3/4 3/4 IEFS-1 1 IEFS-1-1/4 1-1/4 IEFS-1-1/2 1-1/2 IEFS-2 2 IEFS-2-1/2 2-1/2 IEFS-3 3 IEFS-3-1/2 3-1/2 IEFS-4 4 22