CYCLE-CONTROLLED PRECISION LATHE SE 320 NUMERIC Description The SE 320 NUMERIC machine is a universal CNC-lathe machine with digitally controlled drives and a cycle control for the processing of bottles as well as undulating workpieces, that enables a additionally manually operating. Working area Max. Swing: Max. Swing diameter over the slide: Max. Turning diameter with MultiSuisse: Max. Turning diameter with tool turret: distance between centers: Max. diameter of the bar (through Spindle hole) 320 mm 170 mm 320 mm 210 mm* 750 mm 41/55* mm Max. weight of the workpiece clamped in spikes at 100 U/Min.: 200 kg Max. weight of the workpiece clamped flying at 100 U/Min.: 60 kg Main spindle Spindle taper (DIN 55027 & ISO702-III): B5/B6* Spindle taper (DIN 55029 & ISO702-II): D6* Interior cone of the spindle: METRIC 50 /MORSE 6* Spindle bore: 42/57* mm
Diameter of the spindle under the front bearings: Max. number of revolutions of the main spindle in stage 1: Max. number of revolutions of the main spindle in stage 2: Spindle drive Engine power of the main spindle S1/S6: Torque in stage 1 at S1: Torque in stage 1 at S6: Torque in stage 2 at S1: Torque in stage 2 at S6: X-axis Feed: Rapid feed: Travel length: 70/90*mm 880 U/Min 3500 U/Min 7/10 kw 210 Nm 285 Nm 52 Nm 70 Nm 0-3 M/Min. 0-3 M/Min. 183 mm Z-axis Feed: Rapid feed: Travel length: 0-5 M/Min. 0-5 M/Min. 790 mm Manual tool system MultiSuisse B MultiSuisse C* *optional manual tooling system (swiveling)* Parat RD 2 Parat RD 3 Algra TGA-R-250 Algra TGA-R-300 Coromant Capto with tool holder Capto C4/Multifix C Max. Cross section of the turning tool: Capto C4/32x32 mm Coromant Capto with tool holder
Capto C5/Multifix C Max. Cross section of the turning tool: Capto C5/32x32 mm Automatic working system* axiaoler turret without drive of the rotation pieces: Sauter Number of tool positions: 8 Clamping diameter of the shank (according DIN 69880): 20x16 mm automatic working system with with powered tools* axiaoler turret with drive of the rotation pieces: Sauter Number of tool positions: 8 Number of the powered tools: 8 Clamping diameter of the shank (according DIN 69880): 30 mm Max. Cross section of the turning tool: 20x16 mm Drive power of the tools: 4,5 KW Max. torque: 20 Nm Max. number of revolutions: 4000 U/Min Tailstock manual inside taper mount: MK 4 diameter from the recording: 60 mm stroke of the tailstock quill: 120 mm Tailstock with Hydraulic. Disengagement of the quill inside taper mount: MK 5 diameter from the recording: 80 mm stroke of the tailstock quill: 160 mm Pressure force range: 80-800 dan Dimension and weight Height: Wide: Length: Length incl. Chip conveyor right: Weight: 1760 mm 1405 mm 1700 mm 3300 mm* 1600 kg Control RS SIEMENS 840D SINUMERIK Operate s TCU: Technical features: Drive with energy recovery (recuperation) Quick-tool holder MultiSuisse B Vector drive with main motor AC to the spindle drive standard *Optional
automatic stage translation indirect Measurement by encoder of the servomotors coolant system 0,4 bar Automatic central lubrication Adjustable control panel / control panel Machine housing according to CE Control SIEMENS 840 D SINUMERIK Operate with TCU Entering of input and output values in metric / inch units Ethernet interface of the control system with connector RJ45 USB interface Operating voltage 400 Volt, 50 Hz Socket 230V/2A Documentation on CD and printed of paper CE-Certificate 12 months Guarantee from delivery date paintwork 7035-SE / 7016 / 5010 SPECIAL EQUIPMENTS OPTIONAL WITH PRICE INCREASE: Controls RS HEIDENHAIN MANUAL plus 620 Software/Hardware-Extensions for RS Siemens 840D Software-Option for the display of the remaining material Software-Option for the display of the 3D-Simulation Software-Option for the display of the simulation ON-LINE Sinutrain - Software- Simulation of the machine for PC SINUMERIK PCU50 Hardware-extensions Ethernet port Signal light 3 colors (green-yellow-red) Remote diagnostics WAN (Internet connection required via LAN cable) Remote diagnostic GSM (SIM card with internet connection required) Automatic tool system Axial revolving turret, without driven tools Axial revolving turret, with driven tools Spindle boring and spindle mount spindle hole ø 42 mm, bayonet recording B6 (DIN 55027 & ISO702-III) spindle hole ø 57 mm, bayonet recording B6 (DIN 55027 & ISO702-III)
spindle hole ø 57 mm, Camlock D6 (DIN 55027 & ISO702-III) Tailstock Machine without tailstock tailstock, hydraulic sleeve release via foot pedal Chip conveyor Chip conveyor for distance between centers 750 mm Switch cabinet Air-conditioned control Painting of machine Painting according to customer requirements (RAL-colors)