LOW VF SCHOTTKY RECTIFIER VOLTAGE 30 to 00 Volts CURRENT 2.0 Amperes FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94VO For surface mounted applications Low profile package Builtin strain relief Metal to silicon rectifier,majority carrier conduction Low power loss,high efficiency High surge capacity For use in low voltage high frequency inverters,free wheeling, and polarity protection applications IEC600042 ESD 5KV air, 8KV Contact Compliance Lead free in comply with EU RoHS 20/65/EU directives. Green molding compound as per IEC6249 Std.. (Halogen Free) 0.083(2.) 0.075(.9) 0.096(2.44) 0.083(2.3) 0.85(4.70) 0.60(4.06) 0.55(3.94) 0.30(3.30) 0.02(0.305) 0.006(0.52) MECHANICAL DATA Case: JEDEC DO24AA molded plastic Terminals:Solder plated, solderable per MILSTD750,Method 2026 Polarity: Color band denotes cathode end Standard packaging: 2mm tape (EIA48) Weight: 0.0032 ounce, 0.092 gram 0.050(.27) 0.030(0.76) 0.220(5.59) 0.200(5.08) MAXIMUM RATINGS(TA=25 o C unless otherwise noted) PARAMETER SYMBOL SK23L SK24L SK26L S20L UNIT Maximum repetitive peak reverse voltage VRRM 30 40 60 00 V Maximum rms voltage VRMS 2 28 42 70 V Maximum dc blocking voltage VDC 30 40 60 00 V Maximum average forward rectified current I F(AV) 2 A Maximum reverse current I R 250 50 μa Peak forward surge current : 8.3ms single half sinewave superimposed on rated load (Note ) Typical thermal resistance I FSM 50 A RΘJA RΘJL 5 20 o C/W Operating junction temperature range TJ 55 to + 25 55 to + 50 o C Storage temperature range TSTG 55 to + 50 o C Note:. Mounted on P.C.B with minimum pad layout. ELECTRICAL CHARACTERISTICS(TA=25 o C unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS SK23L / SK24L SK26L S20L TYP. MAX. TYP. MAX. TYP. MAX. UNIT Instantaneous forward voltage VF I F=A I F=2A I F=A I F=2A TA=25o C TA=25o C 0.37 0.4 0.25 0.30 0.45 0.40 0.47 0.30 0.4 0.52 0.53 0.66 0.47 0.56 0.72 V V December 22,20REV.02 PAGE.
2.5 30~60V 2.5 0.5 0 0 25 50 75 00 25 50 2.5 00V 2.5 0.5 0 0 25 50 75 00 25 50 T L, Lead Temperature ( C) T L, Lead Temperature ( C) Fig. Forward Current Derating Curve Fig.2 Typical Junction Capacitance C J, Junction Capacitance (pf) 000 30~40V 00 00V 60V 0 0 0. 0 00 V R, Reverse Bias Voltage (V) Fig.3 Typical Junction Capacitance I R, Reverse Current (ma) 00 0 T J = 00 C 0. 30~40V 0.0 20 40 60 80 00 Percent of Rated Peak Reverse Voltage (%) Fig.4 Typical Reverse Characteristics I R, Reverse Current (ma) 00 0 0. T J = 00 C 0.0 60V 0.00 20 40 60 80 00 0.00 00V 0.000 20 40 60 80 00 Percent of Rated Peak Reverse Voltage (%) Percent of Rated Peak Reverse Voltage (%) Fig.5 Typical Reverse Characteristics Fig.6 Typical Reverse Characteristics I R, Reverse Current (ma) 00 T J = 50 C 0 0. 0.0 2 Cathode Anode December 22,20REV.02 PAGE. 2
0 0 0. T J = 00 C 30~40V 0 0. 0.2 0.3 0.4 0.5 0.6 V F, Forward Voltage (V) 0. 0.0 T J = 00 C 60V 0 0.2 0.4 0.6 V F, Forward Voltage (V) Fig.7 Typical Forward Characteristics Fig.8 Typical Forward Characteristics 0 T J = 50 C 00V 0. 0 0. 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 V F, Forward Voltage (V) Fig.9 Typical Forward Characteristics December 22,20REV.02 PAGE. 3
MOUNTING PAD LAYOUT ORDER INFORMATION Packing information T/R 3K per 3" plastic Reel T/R 0.5Kper 7 plastic Reel December 22,20REV.02 PAGE. 4
Part No_packing code_version SK23L_R_0000 SK23L_R2_0000 For example : RB500V40_R2_0000 Part No. Serial number Version code means HF Packing size code means 3" Packing type means T/R Packing Code XX Version Code XXXXX Packing type st Code Packing size code 2 nd Code HF or RoHS st Code 2 nd ~5 th Code Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING A N/A 0 HF 0 serial number R 7" RoHS serial number B 3" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) U D December 22,20REV.02 PAGE. 5
Disclaimer Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, noninfringement and merchantability. Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning lifesaving or lifesustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. December 22,20REV.02 PAGE. 6