CX-400SERIES. World Standard. Strong, High and Less are the keywords understood internationally COMPACT PHOTOELECTRIC SENSOR. Amplifier Built-in

PHOTOELECTRIC SENSOR COMPACT PHOTOELECTRIC SENSOR Amplifier Built-in SERIES Conforming to EMC Directive UL Recognition World Standard Strong, High and Less are the keywords understood internationally

We have a full lineup of world standard photoelectric sensors! Strong, High and Less : three keywords that reflect the fundamental concepts in the design and operation of our sensors. Strong: meaning being able to maintain fully reliable and stable levels of performance, no matter how adverse the work environment becomes. High: meaning technology-backed high detectability. Less: meaning less waste, less time lost, less power consumption, less human and natural resources needed. We have brought you with the ideal standard sensors for the 21st century. Output NPN, PNP Connecting method Cable type, M8 Plug-in connector type, M12 Pigtailed type Cable type of different lengths 0.5 m 1.60 ft, 2 m 6.562 ft, 5 m 16.0 ft Refer to p.9 l for ORDER GUIDE. Special transparent object circuit enhances detectability! Sensing range 2 m 6.562 ft / 0.5 m 1.60 ft A long range and small spot beam! Full lineup 116 models! Retroreflective type for transparent object sensing CX-82/81 0 mm.97 in 800 mm 1.96 in 00 mm 11 in 0 mm 7.87 in Sensing range 70 to 0 mm 2.756 to 7.87 in Small spot beam at approx. "2 mm "0.079 in A bright spot beam at approx. "5 mm "0.197 in Diffuse reflective narrow-view type CX-2 A bright spot beam at approx. "2 mm "0.079 in CX-1 Sensing range 00 mm 11 in / 0 mm.97 in / 50 mm 1.969 in Sensing range 800 mm 1.96 in / 00 mm 11 in / 0 mm.97 in Diffuse reflective type CX-22/21/2 0 mm.97 in The difference in height of one business card can be detected! Adjustable range reflective type CX-2///1 1 Retroreflective type CX-9/91 Sensing range 5 m 16.0 ft / m 9.8 ft 15 m 9.21 ft Thru-beam type CX-12/11 Sensing range 15 m 9.21 ft / m 2.808 ft

Series Selection series sensors solve all your sensing troubles. Long range sensing desired Thru-beam type Longest in its class with a range of 15 m 9.21 ft CX-12 Rertroreflective type Longest in its class with a range of 5 m 16.0 ft CX-9 Diffuse reflective type Long sensing range 800 mm 1.96 in CX-22 Small parts sensing desired Fit slit for thru-beam type Minimum size for sensing object "0.5 mm "0.0 in with slit fitted CX-11 Diffuse reflective narrow-view type LED light source realizes a spot diameter of approx. "2 mm "0.079 in CX-2 Adjustable range reflective type Approx. "2 mm "0.079 in spot unaffected by background objects CX-1 Minute height difference recognition desired (Background objects present) Adjustable range reflective type High precision, 0. mm 0.016 in height difference sensing possible Long sensing range 00 mm 11 in / 0 mm.97 in CX-1/ CX-2/ Glossy object sensing desired Thru-beam type Sensing range 15 m 9.21 ft / m 2.808 ft CX-11/12 Rertroreflective type Polarizing filter built-in CX-91 Adjustable range reflective type FGS function ensures stable sensing CX- Area prone to dirt and dust Thru-beam type Uses penetrating infrared light CX-12 Adjustable range reflective type Judgement based on incidence angle to avoid light-receiving amount swaying CX- Oil is scattered about Thru-beam type Uses acrylic for lens surface for superior oil resistance CX-1 Diffuse reflective type Uses acrylic for lens surface for superior oil resistance CX-2 Rertroreflective type Uses acrylic for lens surface for superior oil resistance CX-9 Simple light beam axis adjustment desired Diffuse reflective narrow-view type The bright spot beam makes the beam axis clearly visible CX-2 Adjustable range reflective type The bright spot beam makes the beam axis clearly visible CX- Precise transparent object sensing desired Rertroreflective type High precision type with built-in special transparent object circuit Built-in special transparent object circuit. Long sensing range 2 m 6.562 ft. CX-81 CX-82 2

Strong against extreme conditions; reliability guarantee. Strong against oil and coolant liquids CX-1 /2 /9 The lens material for the thru-beam type, retroreflective type (excluding the CX-8 ) and the diffuse reflective type are made of strong acrylic that resists harmful effects of coolants. These sensors can be used with confidence even around metal processing machineries that disperse oil mists. The protection mechanism also conforms to IP67 (IEC). Strong against ethanol CX- /8 A strong ethanol resistant polycarbonate is used for the front cover and display cover. Installation is safe even near food processing machineries that disperse ethanol based detergents. The protection mechanism also conforms to IP67 (IEC). Strong against noise Significantly stronger against inverter light and other extraneous light as well as high frequency and electromagnetic noise generated by high-pressure inverter motors and other devices. Fluorescent light tube Inverter motor Strong against interference The interference prevention function allows up to two sensors to be mounted closely together. Oil Strong Interference prevention filter (Optional) Thru-beam type Only CX-11 Strong Strong Noise Retroreflective type Diffuse reflective type Adjustable range reflective type Automatic interference prevention function Strong even against cold environment Stable performance can be maintained even at a temperature of environment of C 1 F. Less energy Power consumption The ideal sensors that are user and environmentally friendly derived from the concept of less waste. Less space The sensors are compact in size at W11.2 H1 D mm W0.1 H1.2 D in. The mounting pitch is also at the world standard size of. mm 1.000 in. Industry standard mounting pitch. mm 1.000 in Compact size 11.2 mm 0.1 in series mm in 1 mm 1.2 in Digital laser sensor LS series Less processing M8 plug-in connector type and M12 pigtailed type are available. This contributes to less time spent on setting up. In addition, cable types are available with cable lengths of 0.5 m 1.60 ft, 2 m 6.562 ft and 5 m 16.0 ft. This results in less wastage. Great maintainability M8 plug-in connector type M12 pigtailed type Elbow Straight Straight 2 m 6.562 ft / ( 5 m 16.0 ft) 2 m 6.562 ft / ( 5 m 16.0 ft) 2 m 6.562 ft / ( 5 m 16.0 ft) No unnecessary cables or terminal blocks Cable type 2 m 6.562 ft 5 m 16.0 ft 0.5 m 1.60 ft

The new standard sensors for the 21st Century equipped with high detection performance. High precision optics and high performance special circuit SUNX s unique optical systems and specially designed electronic circuits provide stable sensing of even the most minutest height difference and the thinnest transparent film. 2.5 times the sensing capability! CX-1/ Detection of the difference in height of even as thin as 0. mm 0.016 in is possible (equivalent to one business card). CX-81/82 A full range of 2 m 6.562 ft sensing range types are available. They are capable of sensing a!m transparent film even at a long range. Twice the sensing range! CX-82 CX- Even different colored objects can be sensed at roughly the same distance. No adjuster control is needed when the setup is changed. 0 % increase in sensing range between black and white* compared to the conventional products! * The difference in sensing range between black non-glossy paper (lightness: 5) and white nonglossy paper High Precision BGS / FGS functions make even the most challenging settings possible. These functions controls the adverse effects of background objects. Refer to p.8 for details. Easy to use high-level functions! 0 1 Conventional product Less resources used 2 Wastage High luminance Spot Comparative ratio with 1 representing conventional SUNX sensors High High luminance spot CX-2/ These sensors deliver a high luminance red spot beam that provides bright visibility. The sensing position can be checked at a glance. Because it has a small spot beam at approx. "2 mm "0.079 in (CX-2/1), even the minutest object can be accurately detected. CX-2 Great visibility approx. "2 mm "0.079 in high luminance spot beam Less Less power consumed The series sensors achieve a maximum of approx. 55 % the power consumption of conventional sensors. Contributes to preserving the environment. Less resources used Based on environmental considerations, simplified packaging is used in order to reduce waste. In addition, the bag is made from polyethylene which produces no toxic gases even when burned. Maximum 5 % reduction compared to conventional sensors!!

Thru-beam type CX-11: m 2.808 ft Applications Detecting tape feeder cassette that is out of position CX-12: 15 m 9.21 ft Slit mask Strong infrared beam CX-12 A 15 m 9.21 ft long-distance sensing range. Remarkable penetrating ability enables applications such as package content detection come into practice. (Note) Strong in dust and dirt CX-12 The infrared light source is strong in dust and dirt compared to the red beam type. Even the thru-beam type is strong at mutual interference CX-11 Two CX-11 sensors, with their red beam light source, can be installed close together by inserting an interference prevention filter. Out of position CX-11 Synchronizing sensor for image processing systems CX-11 Interference prevention filter (Optional) Note: When sensing utilizing penetrating power, make sure to verify using the actual sensor. Retroreflective type CX-9: 5 m 16.0 ft CX-91: m 9.8 ft For transparent object sensing CX-82: 2 m 6.562 ft CX-81: 0.5 m 1.60 ft Long sensing range of 5 m 16.0 ft CX-9 A long 5 m 16.0 ft sensing range is possible with the red LED type that is easy to align with the beam axis. The sensors can be used for wide automatic door shutters. Retroreflective type with polarizing filters CX-91 Built-in polarizing filters ensure stable sensing even on a mirror surface object. Strong against extraneous light and noise CX-91 Hardly affected by extraneous lights or noises, these sensors provide stable sensing. Two sensors can be mounted close together The interference prevention function lets two sensors of any type to be mounted close together precisely. 5

Diffuse reflective type CX-22: 800 mm 1.96 in CX-21: 00 mm 11 in CX-2: 0 mm.97 in Applications Small parts detection CX-2 CX-2: 70 to 0 mm Narrow-view type 2.756 to 7.87 in Beam axis alignment made easy with a high luminance spot beam CX-2 These sensors have a high luminance red LED spot beam which provides bright visibility enabling the sensing position to be checked at a glance. Because it has the smallest spot in its class, approx. "2 mm "0.079 in, even the minutest object can be accurately detected. Reduction of volume adjustment labor Because these sensors possess many variations depending on the sensing range, they enable you to make optimal volume adjustment easily. CX-2 Great visibility approx. "2 mm "0.079 in high luminance spot beam Passage confirmation on substrate conveyor equipment CX-2 Introducing transparent object sensing type sensor CX-8 Our unique optical system and transparent object sensing circuit provide stable sensing of thinner transparent objects than the conventional models. Detecting glossy white electric appliances Applications Detecting plastic bottles stacked on pallets Twice the sensing range! CX-91 CX-82 Transparent objects detectable with CX-8 (Typical examples) Sensing object Glass sheet Cylindrical glass Acrylic board Styrol (Floppy case) Food wrapping film Cigarette case film Vinyl bag Pet bottle (500m#) Sensing object size (mm in) 50 1.969 "50 "1.969 # 50 # 1.969 50 1.969 50 1.969 50 1.969 50 1.969 50 1.969 "66 "2.598 t 0.7 t 0.028 t 1. t 0.051 t 1.0 t 0.09 t 0.9 t 0.05 t!m t 0.9 mil t!m t mil t 0!m t 1.181 mil Reflector setting range CX-81: 00 to 500 mm 11 to 19.685 in, CX-82: 1 to 2 m.281 to 6.562 ft [with the RF- reflector at the optimum condition (Note)] Each object should pass across the beam at the center between the sensor and the reflector.?: Length of cylindrical glasses t : Thickness of sensing object Note: The optimum condition is defined as the condition in which the sensitivity level is set such that the stability indicator just lights up when the object is absent. Passage confirmation of object on a conveyor belt CX-91 Detecting transparent film CX-81 6

Adjustable range reflective type 1.5 times longer than before CX-2 CX- CX-1 CX- 00 mm 11 in 0 mm.97 in 50 mm 1.969 in Spot diameter "2 mm "0.079 in approx. 50 mm 1.969 in Spot diameter "6.5 mm "0.6 in approx. High precision type Can sense height differences as small as 0. mm 0.016 in, with hysteresis of 2 % or less An advanced optical system provides sensing performance that is approx. 2.5 times than conventional models. Even ultra-small differences of 0. mm 0.016 in can be detected accurately. 2.5 times the sensing capability! Not affected by colors. The difference in sensing range between black and white is 1 % or less. (Note) Both black and white objects can be sensed at the same distances. No adjuster control is needed, even when products of different colors are moving along the production line. 0 % higher sensing capability CX-1/ Select from 2 spot diameters as per application Within the choice of 50 mm 1.969 in sensing range sensors, we offer small spot type of approx. "2 mm "0.079 in optimal for detecting minute objects and large spot type of approx. "6.5 mm "0.6 in capable of sensing objects covered with holes and grooves. 0. mm 0.016 in Height differences of as little as 0. mm 0.016 in can be detected at a setting distance of mm in Note: The difference in sensing range between black non-glossy paper (lightness: 5) and white non-glossy paper CX-1 Spot diameter: "2 mm "0.079 in approx. [Positioning] Detects minute holes. CX- Spot diameter: "6.5 mm "0.6 in approx. Detection of presence / [ absence of objects ] Ignores minute holes and accurately detects objects. The bright spot makes beam axis alignment easy These sensors have a high luminance red spot that provides bright visibility. The sensing position can be checked at a glance. Because the CX-1 sensor has a small spot beam, at approx. "2 mm "0.079 in, even the minutest object can be accurately detected. Can be used for sensing minute differences Equipped with a 5-turn adjuster so that even challenging range settings can be handled with ease. Great visibility approx. "2 mm "0.079 in high luminance spot CX-1 7

BGS / FGS functions make even the most challenging settings possible! The BGS function is best suited for the following case The FGS function is best suited for the following case BGS Background not present When object and background are separated FGS Background present When object and background are close together When the object is glossy or uneven Not affected if the background color changes or someone passes behind the conveyor. Unaffected by gloss, color or uneven surfaces when sensing objects present on a conveyor belt. BGS (Background suppression) function The sensor judges that an object is present when light is received at position A of the light-receiving element (2-segment element). This is useful if the object and background are far apart. The distance adjustment method is the same as the conventional adjustment method for adjustable range reflective type sensors. Background OFF Light element received B, or at light not received Moving object in the back Setting distance ON Light at element received A Object Element A Element B FGS (Foreground suppression) function The sensor judges that an object is present when no light is received at position B of the light-receiving element (2- segment element). Accordingly, even objects that are glossy can be sensed. This is useful if the object and background are close together, or if the object being sensed is glossy. OFF in this condition only A B Lens Object absent OFF Emitting element ON in all other conditions Object present ON For glossy object ON Setting distance Conveyor Conveyor Conveyor Light received at position B A conveyor or other back-ground must be present Light received at position A Light is not received at position B, so an object is judged to be present Applications Small tablet detection Detects minute objects unaffected by glossy background objects. Uses FGS function. CX-1 Biscuit detection Stable sensing even for thin objects. Uses FGS function. CX- Passage confirmation Not affected by color variations in objects and background objects. Uses BGS function. CX-2 8

ORDER GUIDE Type Appearance Sensing range NPN output Model No. PNP output Emitting element Thru-beam Long sensing range m 2.808 ft 15 m 9.21 ft CX-11 CX-12 CX-11-P CX-12-P Red LED Infrared LED Retroreflective With polarizing filters Long sensing range For transparent object sensing m 9.8 ft (Note 1) 5 m 16.0 ft (Note 1) 50 to 500 mm 1.969 to 19.685 in (Note 1) 0.1 to 2 m 0.28 to 6.562 ft (Note 1) CX-91 CX-9 CX-81 CX-82 CX-91-P CX-9-P CX-81-P CX-82-P Red LED Infrared LED 0 mm.97 in (Note 2) CX-2 CX-2-P Diffuse reflective 00 mm 11 in (Note 2) 800 mm 1.96 in (Note 2) CX-21 CX-22 CX-21-P CX-22-P Infrared LED Narrow-view 70 to 0 mm 2.756 to 7.87 in (Note 2) CX-2 CX-2-P Red LED Adjustable range reflective Small spot 2 to 50 mm 0.079 to 1.969 in 15 to 0 mm 0.591 to.97 in to 00 mm to 11 in CX-1 CX- CX- CX-2 CX-1-P CX--P CX--P CX-2-P Red LED NOTE: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting brackets. Notes: 1) The sensing range of the retroreflective type sensor is specified for the RF- reflector. The sensing range represents the actual sensing range of the sensor. The sensing ranges itemized in A of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object. Sensor Sensing range: A Sensing object Setting range of the reflector: B Reflector A B CX-91 m 9.8 ft 0.1 to m 0.28 to 9.8 ft CX-9 5 m 16.0 ft 0.1 to 5 m 0.28 to 16.0 ft CX-81 50 to 500 mm 1.969 to 19.685 in 0 to 500 mm.97 to 19.685 in CX-82 0.1 to 2 m 0.28 to 6.562 ft 0.8 to 2 m 2.6 to 6.562 ft 2) The sensing range of the diffuse reflective type sensor is specified for white non-glossy paper (0 0 mm 7.87 7.87 in) as the object. 9

ORDER GUIDE 0.5 m 1.60 ft / 5 m 16.0 ft cable length type, M8 plug-in connector type, M12 pigtailed type 0.5 m 1.60 ft / 5 m 16.0 ft cable length type (standard: 2 m 6.562 ft), M8 plug-in connector type and M12 pigtailed type are available. Thru-beam Retroreflective Diffuse reflective For transparent object sensing Small spot Adjustable range reflective Type Output Standard Long sensing range With polarizing filters Long sensing range Narrow-view CX-11 CX-11-P CX-12 CX-12-P CX-91 CX-91-P CX-9 CX-9-P CX-2 CX-2-P CX-21 CX-21-P CX-22 CX-22-P CX-2 CX-2-P CX-1 CX-1-P CX- CX--P CX- CX--P CX-2 CX-2-P 0.5 m 1.60 ft cable length type CX-11-C05 CX-11-P-C05 CX-11-C5 CX-11-P-C5 CX-11-Z CX-11-P-Z CX-11-J CX-11-P-J CX-12-C05 CX-12-C5 CX-12-Z CX-12-J CX-12-P-C05 CX-91-C05 CX-12-P-C5 CX-91-C5 CX-12-P-Z CX-91-Z CX-12-P-J CX-91-J CX-91-P-C05 CX-91-P-C5 CX-91-P-Z CX-91-P-J CX-9-C05 CX-9-P-C05 CX-9-C5 CX-9-P-C5 CX-9-Z CX-9-P-Z CX-2-Z CX-2-P-Z CX-21-Z CX-21-P-Z CX-22-Z CX-22-P-Z CX-2-Z CX-2-P-Z CX-1-Z CX-1-P-Z CX--Z CX--P-Z CX--Z CX--P-Z CX-2-Z CX-2-P-Z CX-9-J CX-9-P-J CX-81 CX-81-C05 CX-81-C5 CX-81-Z CX-81-J CX-81-P CX-81-P-C05 CX-81-P-C5 CX-81-P-Z CX-81-P-J CX-82 CX-82-C05 CX-82-C5 CX-82-Z CX-82-J CX-82-P CX-82-P-C05 CX-82-P-C5 CX-82-P-Z CX-82-P-J CX-2-C05 CX-2-P-C05 CX-21-C05 CX-21-P-C05 CX-22-C05 CX-22-P-C05 CX-2-C05 CX-2-P-C05 5 m 16.0 ft cable length type CX-2-C5 CX-2-P-C5 CX-21-C5 CX-21-P-C5 CX-22-C5 CX-22-P-C5 CX-2-C5 CX-2-P-C5 Note : Please order the suitable mating cable separately for M8 plug-in connector type and M12 pigtailed type. M8 plug-in connector type (Note) M12 pigtailed type (Note) CX-2-J CX-2-P-J CX-21-J CX-21-P-J CX-22-J CX-22-P-J CX-2-J CX-2-P-J Mating cables (2 cables are required for the thru-beam type.) For M8 plug-in connector type For M12 pigtailed type Type Straight Elbow 2-core -core Model No. Cable length Description CN-2A-C2 CN-2A-C5 CN-2AL-C2 CN-2AL-C5 CN-22-C2 CN-22-C5 CN-2-C2 CN-2-C5 2 m 6.562 ft 5 m 16.0 ft 2 m 6.562 ft 5 m 16.0 ft 2 m 6.562 ft 5 m 16.0 ft 2 m 6.562 ft 5 m 16.0 ft Can be used with all models For thru-beam type emitter (2-core) Can be used with all models Mating cables CN-2A-C2 CN-2A-C5 "9 mm "0.5 in CN-2AL-C2 CN-2AL-C5 2.1 mm 0.909 in 1. mm 1.26 in.5 mm 0.807 in " mm " in "9 mm "0.5 in " mm " in Package without reflector : CX-91-Y : CX-91-P-Y Accessory RF- (Reflector) CN-22-C2, CN-22-C5 CN-2-C2, CN-2-C5 00 mm 11 in "1 mm "0.551 in "5 mm "0.197 in

OPTIONS ( Designation Round slit mask For thru-beam type sensor only Rectangular slit mask For thru-beam type sensor ( only ( ( OS-CX-05 OS-CX-1 OS-CX-2 Model No. Sensing range Min. sensing object Slit size Slit Sensor Slit on one side Slit on both sides Slit on one side Slit on both sides OS-CX-05 6 OS-CX-1 6 OS-CX-2 6 CX-11 CX-12 CX-11 CX-12 CX-11 CX-12 CX-11 CX-12 CX-11 CX-12 CX-11 CX-12 "0.5 mm "0.0 in "1 mm "0.09 in "2 mm "0.079 in 0.5 6 mm 0.0 0.26 in 1 6 mm 0.09 0.26 in 2 6 mm 0.079 0.26 in 00 mm 15.78 in mm in 600 mm 2.622 in 0 mm 1.181 in 900 mm 5. in 0 mm.97 in 1.5 m.29 ft 150 mm 5.906 in "0.5 mm "12 mm "0.72 in "0.0 in "1 mm "0.09 in "12 mm "0.72 in "1.5 mm "0.059 in 2 m 6.562 ft 00 mm 15.78 in "12 mm "0.72 in "2 mm "0.079 in m 9.8 ft 600 mm 2.622 in " mm "0.118 in 2 m 6.562 ft 00 mm 15.78 in 0.5 6 mm "12 mm "0.72 in m 9.8 ft 600 mm 2.622 in 0.0 0.26 in m 9.8 ft 1 m.281 ft.5 m 1.76 ft 1.5 m.921 ft 5 m 16.0 ft 2 m 6.562 ft 7.5 m 2.606 ft m 9.8 ft 1 6 mm "12 mm "0.72 in 0.09 0.26 in 2 6 mm "12 mm "0.72 in 0.079 0.26 in Designation Model No. Sensing range Min. sensing object Interference prevention filter For CX-11 ( only ( PF-CX-V (Vertical) PF-CX-H (Horizonal) 5 m 16.0 ft (Note 1) 5 m 16.0 ft (Note 1) "12 mm "0.72 in (Note 1) "12 mm "0.72 in (Note 1) CX-91 1 m.281 ft (Note 2) CX-9 1.5 m.921 ft (Note 2) RF-2 "0 mm "1.181 in CX-81 Reflector For retroreflective type CX-82 0.1 to 0.6 m 0.28 to 1.969 ft (Note 2) ( CX-91 1.5 m.921 ft (Note 2) sensor only CX-9 m 9.8 ft (Note 2) RF-2 "5 mm "1.78 in CX-81 50 to 00 mm 1.969 to 11 in (Note 2) CX-82 0.1 to 1. m 0.28 to.265 ft (Note 2) Notes: 1) Value when attached to both sides. 2) Set the distance between the CX-91 /9 and the reflector to 0.1 m 0.28 ft or more. However, see the table below for CX-8. The sensing range A may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object. Sensor Sensing range: A ( Sensing object Setting range of the reflector: B Reflector Model No. Sensor Reflector CX-81 CX-82 RF-2 RF-2 RF-2 A 50 to 00 mm 1.969 to 11 in 0.1 to 1. m 0.28 to.265 ft 0.1 to 0.6 m 0.28 to 1.969 ft B 0 to 00 mm.97 to 11 in 0.5 to 1. m 1.60 to.265 ft 0. to 0.6 m 0.98 to 1.969 ft Round slit mask OS-CX- Fitted on the front face of the sensor with one-touch. Round slit mask (Stainless steel) Rectangular slit mask OS-CX- 6 Fitted on the front face of the sensor with one-touch. Rectangular slit mask (Stainless steel) Interference prevention filter PF-CX-V PF-CX-H Two sets of CX-11 can be mounted close together. Interference prevention filter 12.8 mm 0.50 in Reflector RF-2 11 mm RF-2. mm 0. in 1.11 in 5. mm 1.90 in 8. mm 0.27 in 2. mm 1.665 in 11

OPTIONS Designation Model No. Description Reflector mounting bracket MS-RF21-1 MS-RF22 Reflector mounting bracket MS-RF21-1 MS-RF22 MS-RF2 Protective mounting bracket for RF-2 It protects the reflector from damage and maintains alignment. For RF-2 For RF- Reflective tape Sensor mounting bracket (Note 1) RF-11 RF-12 RF-1 MS-CX2-1 MS-CX2-2 MS-CX2- MS-CX2-5 Sensing range (Note ): 0.5 m 1.60 ft [CX-91 ] 0.8 m 2.6 ft [CX-9 ] Sensing range (Note ): 0.7 m 2.297 ft [CX-91 ] 1.2 m.97 ft [CX-9 ] 0.1 to 0.6 m 0.28 to 1.969 ft [CX-82 ] Sensing range (Note 5): 0.5 m 1.60 ft [CX-91 ] Foot angled mounting bracket It can also be used for mounting RF-2. Foot biangled mounting bracket It can also be used for mounting RF-2. Protective mounting bracket Back biangled mounting bracket Ambient temperature: to 50 C 1 to 122 F Ambient humidity: 5 to 85 % RH Notes: 1) Keep the tape free from stress. If it is pressed too much, its capability may deteriorate. 2) Do not cut the tape. It will deteriorate the sensing performance. Ambient temperature: to 55 C 1 to 11 F Ambient humidity: 5 to 85 % RH The thru-beam type sensor needs two brackets. Two M (length 12 mm 0.72 in) screws with washers are attached. MS-RF2 Reflective tape RF-11 0.7 mm RF-12 8 mm 0.15 in RF-1 0 mm 1.181 in 0.028 in mm 0.98 in 0.5 mm 0.0 in 0 mm 1.181 in Two M (length 8 mm 0.15 in) screws with washers are attached. Two M (length mm 0.9 in) screws with washers are attached. 0 mm 1.181 in 0.7 mm 0.028 in Universal sensor mounting stand (Note 2) Sensor checker (Note ) MS-CX- MS-AJ1 MS-AJ2 MS-AJ1-A MS-AJ2-A MS-AJ1-M MS-AJ2-M CHX-SC2 Notes: 1) The plug-in connector type sensor does not allow use of some sensor mounting brackets because of the protrusion of the connector. 2) Refer to the Sensor general catalog 0-0 for details of the universal sensor mounting stand. ) Refer to the Sensor general catalog 0-0 for details of the sensor checker CHX-SC2. ) Set the distance between the sensor and the reflective tape to 0.1 m 0.28 ft (CX-82 : 0. m 1.12 ft) or more. 5) Set the distance between the sensor and the reflective tape to 0.2 m 0.656 ft or more. Universal sensor mounting stand Swivel: MS-AJ1 MS-AJ1-A MS-AJ1-M 60 rotation 5 5 Elevation angle: 5 Swivel: 60 rotation Height adjustment: 150 mm 5.906 in approx. Mounting hole for M6 screw Back angled mounting bracket Horizontal mounting type Vertical mounting type Horizontal mounting type Vertical mounting type Horizontal mounting type Vertical mounting type 60 rotation 5 5 Angle adjustment: 5 Mounting hole for M6 screw 5 Elevation angle: 5 Basic assembly Lateral arm assembly Assembly for reflector It is useful for beam alignment of thru-beam type sensors. The optimum receiver position is given by indicators, as well as an audio signal. With the lateral arm, the sensor can sense from above a production line. 5 Swivel: 60 rotation Height adjustment: 150 mm 5.906 in approx. Mounting hole for M6 screw Sensor mounting bracket MS-CX2-1 MS-CX2-2 Two M (length 12 mm Two M (length 12 mm 0.72 in) screws with 0.72 in) screws with washers are attached. washers are attached. MS-CX2- MS-CX2-5 Two M (length 1 mm 0.551 in) screws with washers are attached. MS-CX- 0 mm 1.181 in Two M (length 12 mm 0.72 in) screws with washers are attached. MS-AJ2 MS-AJ2-A Swivel: 60 rotation 5 5 Elevation angle: 5 Height adjustment: 150 mm 5.906 in approx. Mounting hole for M6 screw With the lateral arm, the sensor can sense from above a production line. 60 rotation 5 5 Angle adjustment: 5 Swivel: 60 rotation Mounting hole for M6 screw MS-AJ2-M Swivel: 60 rotation 5 5 Elevation angle: 5 Height adjustment: 150 mm 5.906 in approx. Mounting hole for M6 screw Two M (length 12 mm 0.72 in) screws with washers are attached. Sensor checker CHX-SC2 Sensor checker POWER CHX-SC2 LEVEL 12

SPECIFICATIONS Item Sensing range Sensing object Hysteresis Repeatability (perpendicular to sensing axis) Supply voltage Current consumption Output Model No. Output operation Short-circuit protection Response time Operation indicator Stability indicator Power indicator Sensitivity adjuster Automatic interference prevention function Protection Type NPN output PNP output Thru-beam Retroreflective Diffuse reflective Long sensing range With polarizing filters Long sensing range For transparent object sensing Narrow-view CX-11 CX-12 CX-91 CX-9 CX-81 CX-82 CX-2 CX-21 CX-22 CX-2 CX-11-P CX-12-P CX-91-P CX-9-P CX-81-P CX-82-P CX-2-P CX-21-P CX-22-P CX-2-P m 15 m m 5 m 50 to 500 mm 0.1 to 2 m 0 mm 00 mm 800 mm 70 to 0 mm 2.808 ft 9.21 ft 9.8 ft (Note 2) 16.0 ft (Note 2) 1.969 to 19.685 in (Note 2) 0.28 to 6.562 ft (Note 2).97 in (Note ) 11 in (Note ) 1.96 in (Note ) 2.756 to 7.87 in (Note ) "50 mm "1.969 in "50 mm "1.969 in "50 mm "1.969 in Opaque, translucent or "12 mm "0.72 in or more opaque, or more opaque or or more transparent, Opaque, translucent or transparent object (Note 5) or more opaque translucent or specular translucent object translucent or opaque transparent object (Note 5) Min. sensing object: "0.5 mm object (Note ) object (Note 2, 5) (Note 2, 5) object (Note 2, 5) ( "0.0 in copper wire ) 15 % or less of operation distance (Note ) 0.5 mm 0.0 in or less 1 mm 0.09 in or less 0.5 mm 0.0 in or less Emitter: ma or less Emitter: ma or less Receiver: ma or less Receiver: ma or less 12 to 2 V DC % Ripple P-P % or less <> NPN open-collector transistor Maximum sink current: 0 ma Applied voltage: 0 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 0 ma sink current) 0. V or less (at 16 ma sink current) ma or less ma or less ma or less ma or less Switchable either Light-ON or Dark-ON Incorporated 1 ms or less Orange LED (lights up when the output is ON)(incorporated on the receiver for thru-beam type) Green LED (lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type) Green LED (lights up when the power is ON) (incorporated on the emitter) Two units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5 m 16.0 ft) Continuously variable adjuster (incorporated on the receiver for thru-beam type) Incorporated (Two units of sensors can be mounted close together.) IP67 (IEC) <> PNP open-collector transistor Maximum source current: 0 ma Applied voltage: 0 V DC or less (between output and V) Residual voltage: 1 V or less (at 0 ma source current) 0. V or less (at 16 ma source current) 1 Environmental resistance Ambient temperature Ambient humidity Ambient illuminance EMC Voltage withstandability Insulation resistance Vibration resistance Shock resistance Emitting element (modulated) Material Cable Cable extension Weight Accessories Sensor Sensing object Setting range of the reflector: B to 55 C 1 to 11 F (No dew condensation or icing allowed ), Storage: 0 to 70 C 22 to 158 F 5 to 85 % RH, Storage: 5 to 85 % RH Incandescent light:,000?x at the light-receiving face EN 6097-5-2 1,000 V AC for one min. between all supply terminals connected together and enclosure MΩ, or more, with 0 V DC megger between all supply terminals connected together and enclosure Red LED to 500 Hz frequency, 1.5 mm 0.059 in double amplitude ( G max.) in X, Y and Z directions for two hours each Infrared LED A B 500 m/s 2 acceleration (50 G approx.) in X, Y and Z directions for three times each Red LED RF- (Reflector): 1 pc. CX-91 CX-9 CX-81 CX-82 0 to m 0 to 5 m 50 to 500 mm 0.1 to 2 m 0 to 9.8 ft 0 to 16.0 ft 1.969 to 19.685 in 0.28 to 6.562 ft 0.1 to m 0.1 to 5 m 0 to 500 mm 0.8 to 2 m 0.28 to 9.8 ft 0.28 to 16.0 ft.97 to 19.685 in 2.6 to 6.562 ft Infrared LED Red LED Enclosure: PBT (Polybutylene terephthalate), Lens: acrylic (CX-8 : polycarbonate), Front cover: acrylic (CX-8 : polycarbonate) 0.2 mm 2 -core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long Extension up to total 0 m 28.08 ft is possible with 0. mm 2, or more, cable (thru-beam type: both emitter and receiver) 50 g approx. (Emitter of thru-beam type: 5 g approx.) Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of 2 C 7. F. 2) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF- reflector. The sensing range represents the actual sensing range of the sensor. The sensing ranges itemized in A of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object. Sensing range: A Reflector ) The sensing range and hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (0 0 mm 7.87 7.87 in) as the object. ) If slit masks (optional) are fitted, an object of "0.5 mm "0.0 in (using round slit mask) can be detected. 5) Make sure to confirm detection with an actual sensor before use.

SPECIFICATIONS Item Model No. Type NPN output PNP output Adjustable range (Note 2) Sensing range (with white non-glossy paper) Hysteresis (with white non-glossy paper) Repeatability Supply voltage Small spot CX-1 CX- CX- CX-2 CX-1-P CX--P CX--P CX-2-P to 50 mm to 1.969 in 2 to 50 mm 0.079 to 1.969 in Adjustable range reflective to 0 mm to.97 in 0 to 00 mm 1.575 to 11 in 15 to 0 mm 0.591 to.97 in to 00 mm to 11 in 2 % or less of operation distance 5 % or less of operation distance Along sensing axis: 1 mm 0.09 in or less, Perpendicular to sensing axis: 0.2 mm 0.008 in or less (with white non-glossy paper) 12 to 2 V DC % Ripple P-P % or less Current consumption Output Output operation Short-circuit protection Response time Operation indicator Stability indicator Distance adjuster Sensing mode Automatic interference prevention function (Note ) Protection Environmental resistance Ambient temperature Ambient humidity Ambient illuminance EMC Voltage withstandability Insulation resistance Vibration resistance Shock resistance Emitting element <> NPN open-collector transistor Maximum sink current: 0 ma Applied voltage: 0 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 0 ma sink current) 0. V or less (at 16 ma sink current) ma or less <> PNP open-collector transistor Maximum source current: 0 ma Applied voltage: 0 V DC or less (between output and V) Residual voltage: 1 V or less (at 0 ma source current) 0. V or less (at 16 ma source current) Switchable either Detection-ON or Detection-OFF Incorporated 1 ms or less Orange LED (lights up when the output is ON) Green LED (lights up under stable operating condition) 5-turn mechanical adjuster BGS / FGS functions Switchable with wiring of sensing mode selection input Incorporated IP67 (IEC) to 55 C 1 to 11 F (No dew condensation or icing allowed ), Storage: 0 to 70 C 22 to 158 F 5 to 85 % RH, Storage: 5 to 85 % RH Incandescent light:,000?x at the light-receiving face EN 6097-5-2 1,000 V AC for one min. between all supply terminals connected together and enclosure MΩ, or more, with 0 V DC megger between all supply terminals connected together and enclosure to 500 Hz frequency, mm 0.118 in double amplitude in X, Y and Z directions for two hours each 500 m/s 2 acceleration (50 G approx.) in X, Y and Z directions for three times each Red LED (modulated) Spot diameter "2 mm "0.079 in approx. (at 50 mm 1.969 in distance) "6.5 mm "0.6 in approx. (at 50 mm 1.969 in distance) "9 mm "0.5 in approx. (at 0 mm.97 in distance) 15 mm 0.591 in approx. (at 00 mm 11 in distance) Material Cable Cable extension Weight Enclosure: PBT (Polybutylene terephthalate), Front cover: Polycarbonate, Indicator cover: Polycarbonate 0.2 mm 2 -core cabtyre cable, 2 m 6.562 ft long Extension up to total 0 m 28.08 ft is possible with 0. mm 2, or more, cable. 55 g approx. Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of 2 C 7. F. 2) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can detect an object 2 mm 0.079 in [CX-(-P): 15 mm 0.591 in, CX-2(-P): mm in], or more, away. ) Note that detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. Actual sensing range of the sensor: A Adjustable range: B Sensing object A B CX-1 / 2 to 50 mm 0.079 to 1.969 in to 50 mm to 1.969 in CX- 15 to 0 mm 0.591 to.97 in to 0 mm to.97 in CX-2 to 00 mm to 11 in 0 to 00 mm 1.575 to 11 in 1

I/O CIRCUIT AND WIRING DIAGRAMS I/O circuit diagram Sensor circuit Tr D ZD Color code / Connector pin No. of the connector type (Brown / 1) V (Black / ) Load Output (Note 1) 0 ma max. (Blue / ) 0 V *1 (Pink / 2) Sensing mode selection input (Note 2, ) 12 to 2 V DC % Wiring diagram Brown Load Black (Note 1) Blue *1 Pink (Note 2, ) 12 to 2 V DC % Internal circuit User s circuit Notes: 1) The emitter of the thru-beam type sensor does not incorporate the output. 2) Sensing mode selection input is incorporated only for the CX- adjustable range reflective type. When using the CX-, be sure to wire the sensing mode selection input (pink / 2). Unstable operation may occur. ) When the mating cable is connected to the plug-in connector type of CX-, its color is white. *1 Sensing mode selection input BGS function: Connect to 0 V FGS function: Connect to V Symbols... D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : NPN output transistor Notes: 1) The emitter of the thru-beam type sensor does not incorporate the black wire. 2) The pink wire is incorporated only for the CX- adjustable range reflective type. When using the CX-, be sure to wire the pink wire. Unstable operation may occur. ) When the mating cable is connected to the plug-in connector type of CX-, its color is white. *1 Sensing mode selection input BGS function: Connect to 0 V FGS function: Connect to V Connector pin position M8 plug-in connector type 2 Sensing mode selection input (Note 2) 1 V Output (Note 1) 0 V M12 pigtailed type 2 Not connected 0 V 1 V Output (Note 1) Notes: 1) The emitter of the thru-beam type sensor does not incorporate the output. 2) Sensing mode selection input is incorporated only for the CX- adjustable range reflective type. When using the CX-, be sure to wire the sensing mode selection input (pink / 2). Unstable operation may occur. I/O circuit diagram Color code / Connector pin No. of the connector type (Brown / 1) V Wiring diagram Brown Sensor circuit Tr D ZD 0 ma max. (Black / ) Output (Note 1) Load (Blue / ) 0 V *1 (Pink / 2) Sensing mode selection input (Note 2, ) 12 to 2 V DC % Black (Note 1) Load Blue *1 Pink (Note 2, ) 12 to 2 V DC % Internal circuit User s circuit Notes: 1) The emitter of the thru-beam type sensor does not incorporate the output. 2) Sensing mode selection input is incorporated only for the CX- -P adjustable range reflective type. When using the CX- -P, be sure to wire the sensing mode selection input (pink / 2). Unstable operation may occur. ) When the mating cable is connected to the plug-in connector type of CX- -P, its color is white. *1 Sensing mode selection input BGS function: Connect to 0 V FGS function: Connect to V Symbols... D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : PNP output transistor Notes: 1) The emitter of the thru-beam type sensor does not incorporate the black wire. 2) The pink wire is incorporated only for the CX- -P adjustable range reflective type. When using the CX- -P, be sure to wire the pink wire. Unstable operation may occur. ) When the mating cable is connected to the plug-in connector type of CX- -P, its color is white. *1 Sensing mode selection input BGS function: Connect to 0 V FGS function: Connect to V Connector pin position M8 plug-in connector type 2 Sensing mode selection input (Note 2) 1 V Output (Note 1) 0 V M12 pigtailed type 2 Not connected 0 V 1 V Output (Note 1) Notes: 1) The emitter of the thru-beam type sensor does not incorporate the output. 2) Sensing mode selection input is incorporated only for the CX- -P adjustable range reflective type. When using the CX- -P, be sure to wire the sensing mode selection input (pink / 2). Unstable operation may occur. 15

PRECAUTIONS FOR PROPER USE All models This product is not a safety sensor. Its use is not intended or designed to protect life and prevent body injury or property damage from dangerous parts of machinery. It is a normal object detection sensor. Mounting The tightening torque should be 0.5 N m or less. M (length 12 mm 0.72 in) screw with washers Sensor mounting bracket (Optional) Wiring Make sure that the power supply is off while wiring. Take care that wrong wiring will damage the sensor. Verify that the supply voltage variation is within the rating. If power is supplied from a commercial switching regulator, ensure that the frame ground (F.G.) terminal of the power supply is connected to an actual ground. In case noise generating equipment (switching regulator, inverter motor, etc.) is used in the vicinity of this product, connect the frame ground (F.G.) terminal of the equipment to an actual ground. Do not run the wires together with high-voltage lines or power lines or put them in the same raceway. This can cause malfunction due to induction. Extension up to total 0 m 28.08 ft (thru-beam type: both emitter and receiver) is possible with 0. mm 2, or more, cable. However, in order to reduce noise, make the wiring as short as possible. Make sure that stress by forcible bend or pulling is not applied directly to the sensor cable joint. Others Do not use during the initial transient time (50 ms) after the power supply is switched on. Take care that the sensor is not directly exposed to fluorescent light from a rapid-starter lamp or a high frequency lighting device, as it may affect the sensing performance. This sensor is suitable for indoor use only. Do not use this sensor in places having excessive vapor, dust, etc., or where it may come in direct contact with water or corrosive gas. Take care that the sensor does not come in direct contact with water, oil, grease or organic solvents, such as, thinner, etc. This sensor cannot be used in an environment containing inflammable or explosive gases. Never disassemble or modify the sensor. DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the SUNX website: http://www.sunx.com CX-1 Sensor CX-1 -Z Sensor Sensitivity adjuster (Note 1, 2) Operation indicator (Orange)(Note 1, ) 0.65 7.85 0.09.95 0.156 Sensitivity adjuster (Note 1, 2) Operation indicator (Orange)(Note 1, ) 0.65 7.85 0.09.95 0.156 Stability indicator (Green)(Note 1, 2) 11.2 0.1 Beam axis 1 1.2 15.5 0.6. 1.000 2-M 0.5 0.0 thru-hole threads 0.118 2. 0.091 Operation mode switch (Note 1, 2) ".7 "0.16 cable, 2 m 6.562 ft long Stability indicator (Green)(Note 1, 2) 11.2 0.1 "9. "0.70 Beam axis Operation mode switch (Note 1, 2) 1 1.2 5.5 1.98 2.5 1.67 15.5 0.6. 1.000 2-M 0.5 0.0 thru-hole threads 0.118 2. 0.091 M8 connector Notes: 1) The shapes of sensitivity adjuster, operation / stability indicator, and operation mode switch have been changed starting from the production in October 07. 2) Not incorporated on the emitter. ) It is the power indicator (green) on the emitter. Notes: 1) The shapes of sensitivity adjuster, operation / stability indicator, and operation mode switch have been changed starting from the production in October 07. 2) Not incorporated on the emitter. ) It is the power indicator (green) on the emitter. 16

DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the SUNX website: http://www.sunx.com CX-1 -J Sensor CX-9 CX-8 CX-2 Sensor Sensitivity adjuster (Note 1, 2) Operation indicator (Orange)(Note 1, ) 0.65 7.85 0.09.95 0.156 Sensitivity adjuster (Note) Operation indicator (Orange) (Note) 0.65 7.85 0.09.95 0.156 Stability indicator (Green)(Note 1, 2) 11.2 0.1 Beam axis 1 1.2 15.5 0.6. 1.000 2-M 0.5 0.0 thru-hole threads 0.118 Operation mode switch (Note 1, 2) 2. 0.091 M12 connector ( 1.72 ) ".7 "0.16 cable 00 11 Notes: 1) The shapes of sensitivity adjuster, operation / stability indicator, and operation mode switch have been changed starting from the production in October 07. 2) Not incorporated on the emitter. ) It is the power indicator (green) on the emitter. Beam-receiving part Beam-emitting part Stability indicator (Green) (Note) 11.2 0.1 Center of sensing 1 1.2 15.5 0.6. 1.000 2-M 0.5 0.0 thru-hole threads Operation mode switch (Note) 0.118 2. 0.091 ".7 "0.16 cable, 2 m 6.562 ft long Note: The shapes of sensitivity adjuster, operation / stability indicator, and operation mode switch have been changed starting from the production in October 07. CX-9 -Z CX-8 -Z CX-2 -Z Sensor CX-9 -J CX-8 -J CX-2 -J Sensor Sensitivity adjuster (Note) Operation indicator (Orange) (Note) 0.65 7.85 0.09.95 0.156 Sensitivity adjuster (Note) Operation indicator (Orange) (Note) 0.65 7.85 0.09.95 0.156 Beam-receiving part Beam-emitting part 11.2 0.1 "9. "0.70 Stability indicator (Green) (Note) Center of sensing 15.5 0.6 5.5 1 2.5 1.98 1.2 1.67. 1.000 2-M 0.5 0.0 thru-hole threads Operation mode switch (Note) 0.118 2. 0.091 M8 connector Note: The shapes of sensitivity adjuster, operation / stability indicator, and operation mode switch have been changed starting from the production in October 07. Beam-receiving part Beam-emitting part Stability indicator (Green) (Note) 11.2 0.1 0.118 Center of sensing 1 1.2 15.5 0.6. 1.000 2-M 0.5 0.0 thru-hole threads 2. ( 0.091 ) Operation mode switch (Note) M12 connector ( 1.72 ) ".7 "0.16 cable 00 ( 11) Note: The shapes of sensitivity adjuster, operation / stability indicator, and operation mode switch have been changed starting from the production in October 07. CX- Sensor Operation indicator (Orange) Distance adjuster (5-turn) 12.5 0.92 8.2 0.2 Operation mode switch CX- -Z Sensor Operation indicator (Orange) Distance adjuster (5-turn) 12.5 0.92 8.2 0.2 Operation mode switch 22 0.866 Center of sensing 11.2 0.1 Stability indicator (Green) 2 0.079 2.8 0.1 Beamreceiving part Beamemitting part 1 1.2. 1.000 2-M 0.5 0.0 thru-hole threads 0.118 0.9 0.05 ".7 "0.16 cable, 2 m 6.562 ft long Stability indicator (Green) 11.2 2 2.8 0.1 0.079 0.1 Beamreceiving part 22 0.866 1. 5.5 2.5 1.2 1.000 1.98 Beamemitting part 1.67 Center of sensing "9. 0.70 2-M 0.5 0.0 thru-hole threads 0.118 0.9 0.05 M8 connector 17

DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the SUNX website: http://www.sunx.com RF- 50. 1.980 Reflector Accessory for the retroreflective type sensor RF-2 5. 1.90 Reflector (Optional) 12.8 0.50 RF-2. 1.11 Reflector (Optional) 9. 59. 1.91 2.5 0.9 0 1.575 0 ( 1.181) 5 0.197 8. 0.27. 0.. 2.1.50 1.665 8 0.15 0.98 21 ( 0.827) 2-".6 "0.12 mounting holes 8. 0.27. 0. Reflector 11 0..2 0.126 0.98 0.9 M nut mounting holes (for mounting at the back) Base 2-". "0.1 thru-holes (for mounting at the side) 2-". "0.1 holes, 6 0.26 deep (for mounting at the back) 2-M nut mounting holes (for mounting at the side) Material: Acrylic (Reflector) ABS (Base) 2-".6 "0.181 mounting holes Material: Acrylic (Reflector) ABS (Base) Material: Acrylic (Reflector) ABS (Base) Two M (length 8 mm 0.15 in) screws with washers and two nuts are attached. RF-11 Reflective tape (Optional) RF-12 Reflective tape (Optional) RF-1 Reflective tape (Optional) 0 1.181 28 ( 1.2) 0.7 0.028 0 1.181 28 ( 1.2) 0.7 0.028 0 1.181 0.5 0.0 8 6 0.15 0.26 Effective reflecting surface Adhesive tape 2 0.98 0.906 Effective reflecting surface Adhesive tape 0 1.181 Reflective surface (Acrylic) Rear surface pressure-sensitive adhesive Material: Acrylic Material: Acrylic MS-CX2-1 t 1.2 t 0.07 Material: Stainless steel (SUS0) Two M (length 12 mm 0.72 in) screws with washers are attached. Sensor mounting bracket (Optional) 1 0.551 8 0.15 5 0.197. 0.1. 0.1 2.5 0.98 1.67 12.5 0.92 12 0.72 0.118 R12 R0.72 22 0.866 15 0.591 7 R R0.98 1. 0.1 2-". "0.1 holes (for RF-2) 0.9 Assembly dimensions Mounting drawing with the receiver of CX-1 0.98 9.5 0.7 Beam axis 0.5 0.0. 0.1 1. 1.2 1.000 2.5 1.67 1 12. 0.8 12 0.72 7 R12 R0.72 22 0.866. 0.1 1.6 0.55.2 0.992 0.118 5 0.197 t 1.2 t 0.07 0. 0.012 18

SENSOR SENSOR DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the SUNX website: http://www.sunx.com MS-CX2-2 15.8 0.622 Sensor mounting bracket (Optional) 1 0.551 22 0.866 1 0.551 7 0.276 7.8 0.07 8-". "0.1 holes Assembly dimensions Mounting drawing with the receiver of CX-1 15.8 0.622 8.2 0.2.6 0.12 22 0.866 1 0.551 6 1.17 Material: Stainless steel (SUS0) Two M (length 12 mm 0.72 in) screws with washers are attached. 0.9 0.98 55 2.165 2 0.906 15.5 R12 R0.72 0.6 1 7 0.276.5.5 t 2 0.177 12 0.177 t 0.079 5 0.197 0.72.5 0.177 7.8 0.07 6 1.17 55 2.165 t 2 t 0.079 Beam axis 28 1.2 1.5 0.177.5 0.177 R12 R0.72 12 0.72. 1.000 15.5 0.6 7 0.276.5 0.177 5 0.197 8.2 0.2 MS-CX2- Sensor mounting bracket (Optional) 0 "55 "2.165 "9 "1.55 6 0.26 19 29 0.78 1.12 Assembly dimensions Mounting drawing with the receiver of CX-1 0 "55 "2.165 "9 "1.55 7 0.276 29 1.12 1. 0.1 19 0.78 7. 0.1 7 0.276 18 0.709 5.5 0.217 5.5 0.217 6.2 0.2 0.9 0.05 18 0.709 1 0.512 11.2 0.9 0.1 0.05 0.98 0.98 " "0.98 R R0.98 0.98 6 1.811 R9.5 R0.7 SENSOR. 1.000 12. 0.8 6 1.811 0.98 SENSOR Material: Stainless steel (SUS0) Two M (length 1 mm 0.551 in) screws with washers are attached. 1 0.512 t 2.5 t 0.098 Beam axis t 2.5 t 0.098 MS-CX2-5 Sensor mounting bracket (Optional) 15 0.591 t 1.5 t 0.059 5 1.772.5 0.18 7. 0.1. 0.1 18.9 0.7 5 0.197 6.5 0.6 5 0.197 7 0.276 8 0.15 0.98 19 0.78 19 0.78 R19 R0.78 R R0.98 7 1.57 Assembly dimensions Mounting drawing with the receiver of CX-1 15 0.591 t 1.5 t 0.059.6 26.2 0.811 1.01 7 5 1.772 18.9 0.7 5 0.197 6.5 0.6 7 0.276 5 0.197. 1.000 R R0.98 7 1.57 Beam axis 19 Material: Stainless steel (SUS0) 7.9 0.11 Two M (length 12 mm 0.72 in) screws with washers are attached. 7.9 0.11

DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the SUNX website: http://www.sunx.com MS-CX- Sensor mounting bracket (Optional) 0 1.181.5 0.807 R R0.98 t 1.2 t 0.07.5 0.18 5. 0.197 0.1. 0.1 5 0.98 1.78 1 0.551 8 0.15. 0.1 6 0.26 8.5 0.5 18 0.709 Assembly dimensions Mounting drawing with the receiver of CX-1 Beam axis 1 1.2.2 0.992 1.6 0.55 11.2 0.1 6 0.26 8.5 0.5 9 0.5 18 0.709 0.5 0.0.5 0.18.8 0.189. 1.000 0 1.181 t 1.2 t 0.07 0. ( 0.012) 5 1.78 6 0.26 R R0.98 15 0.591. 0.1 5 0.197 Material: Stainless steel (SUS0) Two M (length 12 mm 0.72 in) screws with washers are attached. 6 0.26. 0.1 8 0.15 1 0.551 MS-RF21-1 Reflector mounting bracket for RF-2 (Optional) 5.5 0.217 2 0.906 Assembly dimensions 5.5 0.217 2 0.906 "6 50 "1.17 1.969 "6 50 "1.17 1.969 0.9.2 0.126 " t 1.2 "0.98 t 0.07 12.5 0.92 0 16 0.60.5 0.18 R7.5 R0.295 0.98 6 1.811 6 1.811 0.98 0.9 0 1 0.512 Material: Stainless steel (SUS0) Two M (length 12 mm 0.72 in) screws with washers are attached. 1 0.512 MS-RF22 Reflector mounting bracket for RF-2 (Optional) 0.98 5 1.78 0.98.5 0.177 11 0. 0.9 Assembly dimensions.5 0.177 0.98 0.9 28. 19. 1.11 0.760 5. 1.90 8. 0.27 16 0.60 0.9 8 0.15 6 0.26 1.72 8-M 0.5 0.0 thru-hole threads Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated) Two M (length 8 mm 0.15 in) screws with washers are attached. t 1.6 t 0.06. 1.7 27 1.06 6 0.26. 1.50 21 0.827 8 0.15 t 1.6 t 0.06