SLIDEART TS Page 6
2401.1-2401.2 2401.1 Basic kit of left hand rollers. Complete kit with 1 pair of rollers in 1 aluminium, die-cast zamak and stainless steel, 2 guide sliding piece, 1 LH tilt arm and 1 RH tilt arm in stainless steel and zamak, 2 stainless steel counterplates, screw spacer and 2 reinforcements in black nylon, 2 TORX (T2) cap screws Mx12, TORX (T2) cap screws 4.8x2, 9 TORX (T2) cap screws 4.8x0 and 8 TORX (T20) countersunk head screws 4.2x2 in stainless steel. Weight capacity: 2 rollers max 100 Kg. 2401.2 Basic kit of right hand rollers. Complete kit with 1 pair of rollers in aluminium, die-cast zamak and stainless steel, 2 guide sliding piece, 1 LH tilt arm and 1 RG tilt arm in stainless steel and zamak, 2 stainless steel counterplates, screw spacer and 2 reinforcements in black nylon, 2 TORX (T2) cap screws Mx12, TORX (T2) cap screws 4.8x2, 9 TORX (T2) cap screws 4.8x0 and 8 TORX (T20) countersunk head screws 4.2x2 in stainless steel. Weight capacity: 2 rollers max 100 Kg. 1 6 Slideart Ts 2401.1 2401.2
2406/1100-2406/1400-2406/1700 2406/1100 Guides and covers (L=from 700 to 1100 mm) in aluminium, zamak caps, 1 1013, 8019, 900, 9010, BL10, C, F, 1 stroke end in aluminium and nylon. GR217, NE, SILV, ZE 2406/1400 Guides and covers (L=from 1101 to 1100 mm) in aluminium, zamak caps, 1 stroke end in aluminium and nylon. 2406/1700 Guides and covers (L=from 1401 to 1700 mm) in aluminium, zamak caps, 1 stroke end in aluminium and nylon. 1013, 8019, 900, 9010, BL10, C, F, GR217, NE, SILV, ZE 1013, 8019, 900, 9010, B.MA, BL10, BR, BR801, C, F, NE, SILV, ZE 1 1 Slideart Ts 7 D CODICE A B C D E C 2406/1100 2400 1100 707 1100 2400 2406/1400 3000 1400 1007 1400 3000 2406/1700 360 1700 1307 1700 360 B A 2406/1100-2406/1400-2406/1700
2401.701 3200.620R-3200.620L 2401.701 Kit of 2 aluminium reinforcements, 2 zamak caps, 4 TORX (T2) cap 1013, 8019, 900, 9010, B.MA, BL10, 1 screws 4.8x2 and 4 TORX (T2) cap screws Mx12 in stainless steel. BR, BR801, C, GR217, SILV 3200.620R RH 4 closing point kit, in black galvanized zamak, premounted TORX in stainless steel 304 and 430. 3200.620L LH 4 closing point kit, in black galvanized zamak, premounted TORX in stainless steel 304 and 430. 8 Slideart Ts 49 44 20 48 139 89 33 4 2401.701
2410.1-2410.2 2410 2410 Closing kit. Basic kit (4 locking points) with corner devices, transmission and movement devices, hooks and closing point in black zamak, screws in stainless steel 304. 2410.1 Closing kit. Basic kit (4 locking points) with corner devices, transmission and movement devices, hooks and closing point in black galvanized zamak, screws in stainless steel 304. 2410.2 Closing kit. Basic kit (4 locking points) with corner devices, transmission and movement devices, hooks and closing point in black galvanized zamak, screws in stainless steel 304. Slideart Ts 9
1243.701 1243.702 1243.710 1243.713 1243.714 1243.721 1243.72 1243.701 Locking piece in black galvanized zamak, 1 polyurethane cap. 40 1243.702 Keeper in black galvanized zamack, 1 preasembled grub screw Mx6 in 40 stainless steel 304. 1243.710 Locking piece in black galvanized zamak, 1 polyurethane cap. 40 1243.713 Locking piece in black galvanized zamak, 1 polyurethane cap. 40 1243.714 Upper corner drive in black galvanized zamack. 10 1243.721 Adjustable keeper in black galvanized zamak, 2 pre-assembled grub 40 screws Mx12 and 1 countersunk head screw M4x8 in stainless steel 304. 1243.72 Adjustable keeper in black galvanized zamak, 1 pre-assembled grub screw Mx6 in stainless steel 304. 40 60 40 0,8 4, 14, 10, Ø,8 19, 2,7 1243.710 1243.721
1243.790 1246.703 3200.810 3200.820R - 3200.820L 1243.790 Upper corner drive in black galvanized zamak. 10 1246.703 Upper corner drive in aluminium and black galvanized zamack. 10 3200.810 (patented) Intermediate closing point in white galvanized zamak, 40 premounted screws in stainless steel 304 and 430, and adjustable locking piece. 3200.820R (patented) Right kit for 6 closing points in white galvanized zamak, premounted screws in stainless steel 304 and 430. 3200.820L (patented) Left kit for 6 closing points in white galvanized zamak, premounted screws in stainless steel 304 and 430. 61 14,8 19, 18 2,7 Ø,8 6 Ø,9 111 4,4 2,3 13, 19, 1243.790 Ø6 4
2401.901 2401.902 2401.901 Roller support drilling jig, in black nylon, with co-molded steel bushings. 1 2401.902 Fixed return sash piece positioning jig, in black nylon. 1 62 14, 20 104,6 6,3 40 37, 96 16, 16, 14 2 0 34 34 34 0 6,3 101,6 2401.901 2401.902
2406.701 2401.800 2401.800 Supplementary arm in stainless steel and white galvanized zamak. 2406.701 Cover carter in aluminium and nylon. To use for window applications. 1013, 8019, 900, 9010, B.MA, BL10, C, F, NE, SILV, ZE 1 63 104 14 6,9 31,1 38,1 7 113 2406.701 1700 2401.800
2401.80 2406.901 2401.80 Releasable return sash piece in zamak, cap and handle in nylon. 2406.901 Upper guide drilling jig, in black nylon, with co-molded steel bushings. 1 64 38,2 10 1,7 21,2 6 3,4 22, 10,8 10 6 3 2 1 2406.901 6 6 2401.80 4
3200.96 2406.902 2406.902 Lower guide positioning jig, in black nylon and white galvanized steel. 1 3200.96 Accessories positioning jig in brown nylon. 6 2 6 4 4, 8 4, 11, 1, 28, 49 4 182 13 11 149 3200.96 2406.902
66 TECHNICAL SCHEMES art. 2410
TECHNICAL SCHEMES art. 2410.1 /.2 67
68 TECHNICAL SCHEMES art. 3200.620R/L
TECHNICAL SCHEMES art. 3200.620R/L 69
70 TECHNICAL SCHEMES art. 2401.80