0.1.018 designed by Windham Fabrics featuring the Gina fabric collection by Whistler Fabrics size: x 79 FREE PROJET this is a digital representation of the quilt top, fabric may vary. please note: before making your project, check for any pattern updates at s free projects section. e: info@ p: 01-9-0 f: 01-9-9719
KEY FAR SKU YD UTTNG NSTRUTONS A 09-1 1/ () -1/ x Width of Fabric (WOF) strips. Subcut the strips into (10) -1/ squares. 09- () x WOF strips. Sub-cut the strips into (80) 097- grey 1 / (0) x WOF strips. Sub-cut the strips into (80) D 09- E 09- washed () x WOF strips. Sub-cut the strips into (80) F 09- G 097- washed () x WOF strips. Sub-cut the strips into (80) H 09-1/ () -1/ x WOF strips. Sub-cut the strips into (10) -1/ squares. 09- /8 () x WOF strips. Sub-cut the strips into (0) J 09- K 09-1 L 09- /8 () x WOF strips. Sub-cut the strips into (0) 1
KEY FAR SKU YD UTTNG NSTRUTONS 09-1 () -1/ x WOF strips. Sew the strips together end to end with diagonal seams and cut () -1/ x 7-1/ strips. () -1/ x WOF strips. Sew the strips together end to end with diagonal seams and cut () -1/ x -1/ strips. N 097-1 acking 09- NDNG (8) -1/ x WOF strips for the binding. () 87 x WOF strips. Sew the strips together and trim to 7 x 87 for the pieced back. atting 7 x 87 lock Assembly 1. Place (1) square on the top left corner of (1) A -1/ square, right sides together (Fig. 1). Sew across the diagonal of the smaller square from the upper right corner to the lower left corner (Fig. 1). Flip open the triangle formed and press (Fig. ). Trim away the excess fabric from behind the triangle 1/ away from the sewn seam.. Follow Figure for the seam direction to add a square to each of the remaining corners of the A -1/ square to make (1) 1 square (Fig. ).. Repeat Steps 1- to make (10) 1 squares total. 1 Fig. 1 Fig. Fig. Fig. A
. Repeat Steps 1- and refer to Figures -9 for fabric identification, placement and seam direction to make (10) squares, (0) squares, (0) squares, (0) squares and (0) squares. NOTE: The arrow in Figures and 7 denotes fabric print direction. H J E D E G F G Fig. Fig. Fig. 7 Fig. 8 Fig. 9. Sew (1) square to each side of (1) square to make the top row. Repeat to make the bottom row. Sew (1) square to each side of (1) 1 square to make the middle row. Sew the () rows together to make (1) lock One square (Fig. 10). Repeat to make (10) lock One squares total. Pay attention to the orientation of the units.. Sew (1) square to each side of (1) square to make the top row. Repeat to make the bottom row. Sew (1) square to each side of (1) square to make the middle row. Sew the () rows together to make (1) lock Two square (Fig. 11). Repeat to make (10) lock Two squares total. Pay attention to the orientation of the units. L K lock One lock Two 1 Fig. 10 Fig. 11
Quilt Top Assembly (Refer to the Quilt Diagram while assembling the quilt top.) 7. Sew () lock One squares and () lock Two squares together, alternating them, to make Row One. Repeat to make Row Three and Row Five. 8. Sew () lock Two squares and () lock One squares together, alternating them, to make Row Two. Repeat to make Row Four. 9. Sew the () rows together in numerical order to make the enter lock. 10. Sew (1) -1/ x 7-1/ strip to each side of the enter lock. Sew (1) -1/ x -1/ strip to the top and to the bottom of the enter lock to make the quilt top. Finishing 11. Layer and quilt as desired. 1. Sew the (8) N -1/ x WOF strips together end-to-end with -degree seams to make the binding. Fold this long strip in half lengthwise with wrong sides together and press. 1. ind as desired.
SZE: X 79 Quilt Diagram 1 1 1 1 1 1 1 1 1 1