SEW-ON
SEW-on sew-on hook and loop SEW ON HOOK AND LOOP FASTENERS The perfect nylon fastener to sew on any fabric by hand or machine, yet so adaptable that other methods of attachment, besides sewing, are possible. These include: Riveted (e.g. to aluminium) Screwed (e.g. to steel) Nailed (e.g. to timber) Stapled (e.g. to cardboard) Rust & jam-free, it will out perform & outlast traditional fasteners Operating temperature range from -56 C to 93 C Specifications CODE COLOUR 16mm 20mm 25mm 38mm 50mm 100mm 330 BLACK 010 WHITE 041 BEIGE 097 LIGHT GREY 098 SLATE GREY 106 BROWN 160 OLIVE GREEN 161 COACHMAN GREEN 498 YELLOW 210 NAVY 208 ROYAL BLUE 147 RED 088 PINKGLOW 935 GREENGLOW 105 YELLOWGLOW 104 ORANGEGLOW PACKAGING 25 metre rolls of either hook or loop Customer cutting service available
SEW-on sew-on hook and loop Hook 88 and 1000 loop closure performance Cycle Life Average WIDTH WISE CURVED SHEAR ON 11.5cm RADIUS TENSION OR LATCHING EFFECT PEEL STRENGTH piw HIGH 0.98kg/cm² 14psi 0.74kg/cm² 10.5psi 1.97kg/cm² 28.0psi 0.46kg/cm² 6.5psi 0.54 kg/25mm WIDTH 1.2piw GENERAL SEWING INSTRUCTIONS Figure 1 Figure 2 Figure 3 Slitting (lengthwise cut): Due to the general weave construction of VELCRO Brand hook and loop tapes, the possibility of fraying can occur if the tapes are slit or cut in a lengthwise direction. It is for that reason that the tapes are woven with a 2mm selvage along both edges. VELCRO Brand fasteners are not limited by directional forces. While there are differences, you can generally use them in any alignment. VELCRO Brand hook tape is the most durable part of the fastening closure and consequently "harsher" to the touch. The loop, or soft, part of the closure should be facing more delicate or sensitive areas such as human skin or textured fabrics. Standard fastening application requires stitching along all four edges of each tape component, forming a "box" stitch (Fig. 1). We strongly advise against sewing along two edges without completing the box stitch. Where extra strength may be needed, you may need to secure the tape with a cross stitch (Fig. 2), or by stitching additionally straight down the middle of the tape (Fig. 3). Nipping the corners of the tape enhances its appearance and eliminates sharp points. IMPORTANT NOTICE TO PURCHASER All statements, technical advice and recommendations contained herein are based on tests believed to be reliable, but the accuracy thereof is not guaranteed, and the following is made in lieu of all warranties, expressed or implied: Seller s and manufacturer s only obligation shall be to replace the quantity of product proved to be defective. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use of or the inability to use the product. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith. No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by officers of seller and manufacturer. VELCRO and other marks are owned by Velcro Industries B.V. 2015 VELCRO Australia PTY LTD 5-11 David Lee Road, Hallam VIC 3803 Tel: (+61) 3 9703 2466 Fax: (+61 3 9703 2305) 1300 VELCRO (1300 835 276) FREECALL 1800 337 024 Web: www.velcro.com.au E: AUS_Sales@velcro.com
SEW-on Loop 2000 ULTRA SOFT AND UNNAPPED LOOP LOOP 2000 Loop 2000 is an unnapped, soft nylon fastener with hundreds of tiny loops. Very gentle against the skin, Loop 2000 is ideal for use in the medical industry for: Strap & body support Cushioning Padding Loop 2000 can be sewn onto any fabric by hand or machine. Use with HTH Hook for a secure closure every time. HTH Hook is a low-profile, low-linting hook with superior grip, making it ideal for use with Loop 2000. Both are washable and reusable for outstanding performance from a great team. Specifications BLACK 25mm 50mm WHITE 25mm 50mm PACKAGING: 25 metre rolls. Customer cutting service available. Hook and loop closure performance Cycle Life Average WIDTH WISE CURVED SHEAR ON 41/2" RADIUS TENSION OR LATCHING EFFECT PEEL STRENGTH piw HOOK 88: HIGH HOOK 88: 8.5psi 0.60kg/cm 2 HOOK 88: 7.0psi 0.49kg/cm 2 HOOK 88: 17.0psi 1.19kg/cm 2 HOOK 88: 8.5psi 0.60kg/cm 2 HOOK 88: 0.35piw 0.16kg/25mm WIDTH HTH 705: HIGH HTH 705: 26psi 1.82kg/cm 2 HTH 705: N/A HTH 705: N/A HTH 705: 13psi 0.91kg/cm 2 HTH 705: 0.6piw 0.27kg/25mm WIDTH
SEW-on Loop 2000 ULTRA SOFT AND UNNAPPED LOOP GENERAL SEWING INSTRUCTIONS Figure 1 Figure 2 Figure 3 Slitting (lengthwise cut): Due to the general weave construction of VELCRO Brand hook and loop tapes, the possibility of fraying can occur if the tapes are slit or cut in a lengthwise direction. It is for that reason that the tapes are woven with a 2mm selvage along both edges. VELCRO Brand fasteners are not limited by directional forces. While there are differences, you can generally use them in any alignment. VELCRO Brand hook tape is the most durable part of the fastening closure and consequently "harsher" to the touch. The loop, or soft, part of the closure should be facing more delicate or sensitive areas such as human skin or textured fabrics. Standard fastening application requires stitching along all four edges of each tape component, forming a "box" stitch (Fig. 1). We strongly advise against sewing along two edges without completing the box stitch. Where extra strength may be needed, you may need to secure the tape with a cross stitch (Fig. 2), or by stitching additionally straight down the middle of the tape (Fig. 3). Nipping the corners of the tape enhances its appearance and eliminates sharp points. IMPORTANT NOTICE TO PURCHASER All statements, technical advice and recommendations contained herein are based on tests believed to be reliable, but the accuracy thereof is not guaranteed, and the following is made in lieu of all warranties, expressed or implied: Seller s and manufacturer s only obligation shall be to replace the quantity of product proved to be defective. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use of or the inability to use the product. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith. No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by officers of seller and manufacturer. VELCRO and other marks are owned by Velcro Industries B.V. 2015 VELCRO Australia PTY LTD 5-11 David Lee Road, Hallam VIC 3803 Tel: (+61) 3 9703 2466 Fax: (+61 3 9703 2305) 1300 VELCRO (1300 835 276) FREECALL 1800 337 024 Web: www.velcro.com.au E: AUS_Sales@velcro.com
SEW-ON HTH Hook HIGH STRENGTH LOW LINT HOOK ULTRA-MATE brand HTH HOOK ULTRA-MATE Brand HTH fasteners offer performance properties never before available with ordinary hook and loop fasteners. They are moulded hook fasteners engineered to provide superior closure with a variety of loops, and to meet specific performance characteristics in conjunction with a range of polymers, each of which provides it's own distinctive features. As such, each HTH hook style differs from each other. Each has its own specific characteristics and advantages to better meet your specific fastening requirements. HOOK STYLE 705 HOOK STYLE 711 A moulded nylon hook which is similar to our "Sew On" Is a high density polyethylene moulded hook ideal on product in its properties, but with the added benefit of disposable items and can be gamma ray sterilised, being low linting. which is ideal for medical applications. Nylon hook High cycle: excellent memory for long life Low density Melting Point: 173 C Polyethylene hook Medium cycle: medium life Low cost Melting Point: 136 C Specifications BLACK 25mm 50mm WHITE 25mm 50mm ADHESIVE BACKING Sew on and Adhesive 0119 PACKAGING: Hook style 711 is adhesive backed: 22.8 metre rolls. Hook style 705 Sew on: 45.6 metres. Hook style 705 Adhesive: 22.8 metres. Before using adhesives in production, the user should test the adhesive to determine the suitability for the intended use.
SEW-on HTH HIGH STRENGTH LOW LINT HOOK HTH Hook and loop 1000 closure performance Cycle Life Average WIDTH WISE CURVED SHEAR ON 11.5cm RADIUS TENSION OR LATCHING EFFECT PEEL STRENGTH HTH 705 hook: HIGH 1.2kg/cm² 17psi N/A 2.40kg/cm² 34psi N/A 0.72kg/25mm WIDTH 1.6piw HTH 711 Hook: MEDium 2.40kg/cm² 34psi N/A N/A 4.78kg/cm² 68psi 0.95kg/25mm WIDTH 2.1piw IMPORTANT NOTICE TO PURCHASER All statements, technical advice and recommendations contained herein are based on tests believed to be reliable, but the accuracy thereof is not guaranteed, and the following is made in lieu of all warranties, expressed or implied: Seller s and manufacturer s only obligation shall be to replace the quantity of product proved to be defective. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use of or the inability to use the product. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith. No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by officers of seller and manufacturer. VELCRO and other marks are owned by Velcro Industries B.V. 2015 VELCRO Australia PTY LTD 5-11 David Lee Road, Hallam VIC 3803 Tel: (+61) 3 9703 2466 Fax: (+61 3 9703 2305) 1300 VELCRO (1300 835 276) FREECALL 1800 337 024 Web: www.velcro.com.au E: AUS_Sales@velcro.com
sew-on hook and loop Flame retardant Sew-on flame retardant sew-on hook and loop A fastening system specifically developed for industries where protection against fire is paramount. Ideal for: Aircraft and automotive upholstery Train seats Safety clothing Defence forces Combat clothing Airforce flying suits Firemen's turnout coats special features Operating Temperature range from -56 C to 93 C Specifications BLACK 20mm 25mm 50mm WHITE 25mm BEIGE 20mm 25mm 50mm OLIVE GREEN 25mm 50mm 100mm NAVY 20mm 25mm 50mm PACKAGING 25 Metre Rolls of either hook or loop. Customer cutting service available. FLAME RETARDANT HOOK AND LOOP FASTENERS CAN BE MANUFACTURED TO COMPLY WITH Federal Aviation Regulations Part 25.853(A) Mil-Spec. AA55126 Rev B Motor Vehicle Safety Standard FMVSS 302 AMTRAK Spec. No. GEN-S-014-001 A certificate of analysis is available upon request with each order.
sew-on hook and loop Flame retardant Sew-on Hook 88 and 1000 loop closure performance Cycle Life Average WIDTH WISE. CURVED SHEAR ON 11.5cm RADIUS TENSION OR LATCHING EFFECT PEEL STRENGTH HIGH 0.98kg/cm² 14psi 0.74kg/cm² 10.5psi 1.97kg/cm² 28psi 0.46kg/cm² 6.5psi 0.54kg/25mm WIDTH 1.2piw GENERAL SEWING INSTRUCTIONS Figure 1 Figure 2 Figure 3 Slitting (lengthwise cut): Due to the general weave construction of VELCRO Brand hook and loop tapes, the possibility of fraying can occur if the tapes are slit or cut in a lengthwise direction. It is for that reason that the tapes are woven with a 2mm selvage along both edges. VELCRO Brand fasteners are not limited by directional forces. While there are differences, you can generally use them in any alignment. VELCRO Brand hook tape is the most durable part of the fastening closure and consequently "harsher" to the touch. The loop, or soft, part of the closure should be facing more delicate or sensitive areas such as human skin or textured fabrics. Standard fastening application requires stitching along all four edges of each tape component, forming a "box" stitch (Fig. 1). We strongly advise against sewing along two edges without completing the box stitch. Where extra strength may be needed, you may need to secure the tape with a cross stitch (Fig. 2), or by stitching additionally straight down the middle of the tape (Fig. 3). Nipping the corners of the tape enhances its appearance and eliminates sharp points. IMPORTANT NOTICE TO PURCHASER All statements, technical advice and recommendations contained herein are based on tests believed to be reliable, but the accuracy thereof is not guaranteed, and the following is made in lieu of all warranties, expressed or implied: Seller s and manufacturer s only obligation shall be to replace the quantity of product proved to be defective. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use of or the inability to use the product. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith. No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by officers of seller and manufacturer. VELCRO and other marks are owned by Velcro Industries B.V. 2015 VELCRO Australia PTY LTD 5-11 David Lee Road, Hallam VIC 3803 Tel: (+61) 3 9703 2466 Fax: (+61 3 9703 2305) 1300 VELCRO (1300 835 276) FREECALL 1800 337 024 Web: www.velcro.com.au E: AUS_Sales@velcro.com
Colour Chart The solution to your fastening problems...
Sew on tape colour range VELCRO Brand fasteners are made of nylon (with the exception of polyester for a specific specialty product range), making them completely washable, dry cleanable and virtually unbreakable. Under normal conditions, they will easily outlast the life of the garment or article to which they are applied. However, a minimal amount of care is required and the following points should be remembered: Treat as you would any other synthetic fastener or material. When laundering or dry cleaning it is important to ensure that the fastener is closed to avoid a lint build-up and snagging. However, should you forget, the hook portion of the fastener can be cleaned with a stiff brush or another piece of hook tape. To iron, set for nylon and keep the fasteners in a closed position. NOTE: Due to the density of the weave of the tapes a difference in colour depth may be detected between hook and loop tapes of the same colour. Black - 330 White - 010 Beige - 041 Light Grey - 097 Slate Grey - 098 Brown - 106 Olive Green - 160 Coachman Green - 161 Yellow - 498 Navy - 210 Royal Blue - 208 Red - 147 Pinkglow - 088 Greenglow - 935 Yellowglow - 105 Orangeglow - 104 VELCRO and other marks are owned by Velcro Industries B.V. 2015 VELCRO Australia PTY LTD 5-11 David Lee Road, Hallam VIC 3803 Tel: (+61) 3 9703 2466 Fax: (+61 3 9703 2305) 1300 VELCRO (1300 835 276) FREECALL 1800 337 024 Web: www.velcro.com.au E: AUS_Sales@velcro.com