Complete line of Holemaking Products and Accessories
I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related accessories, knockout punches, new levels, and a wider range of conduit cutting tools. Now Klein offers even more solutions for making holes in drywall and ceiling tile to help get the job done right. 2
High quality, long lasting products that save time and effort on the job. 3
Flexible Drill Bits Flex Bit Augers Used to drill holes through wood within a wall. Tapered back for easy bit retrieval. Spring steel shaft resists deformation. Screw point tip pulls the bit through wood. Hole in tip allows for use with wire or cable pulling grip. Length Weight (lbs.) 53716 3/8" x 54" 1.00 53717 3/8" x 72" 1.00 53718 9/16" x 54" 1.00 53719 3/4" x 54" 2.00 53751 3/4" x 72" 2.00 53720 1" x 54" 2.00 Flex Bit Extensions 53720 53719 53718 53716 53719 53722 Connects to the end of a flex bit and extends the length. For use with flex bits 3/4" and larger ( 53722). Connection diameter is 5/8" ( 53722). For use with flex bits 9/16" and smaller ( 53723). Connection diameter is 7/16" ( 53723). Length Connection Diameter Weight (lbs.) 53722 54" 5/8" 1.00 53723 54" 7/16" 1.00 Flex Bit Placement Tool Folding design stores more compactly than standard tool. Cushion grip handle for non-slip comfort. For use with flexible drill bits. Positions flexible drill bits horizontally or vertically within a wall. 53715 53715 1.00 Weight (lbs.) 4 NOTE: Read and follow safety instructions in power tool owner's manual.
Pulling Grips Clips to flex bit for pulling wire and cable up to 9/16" in diameter ( KPS050); up to 1" ( KPS075). Grip ( KPS050) is used to pull up to 9/16" diameter wire, cable or fish tape through walls; grip ( KPS075) up to 1". Pulling grip attaches to the hole in the tip of the flex bit; wire mesh holds the wire during the pull. Swivel end helps reduce twisting. Capacity Maximum Safe Load Weight (lbs.) KPS050 1/2" - 9/16" 100 lb 1.00 KPS075 3/4" - 1" 185 lb 1.00 WARNING: Do not exceed maximum safe load as listed on the label attached to the product. KPS050 KPS075 WARNING: Always match proper size and type of grip to application. Pulling Grips WARNING: Always inspect equipment before use. Flex Bit Kit 3 piece kit includes folding placement tool, 1/2"-9/16" O.D. pulling grip and 9/16" x 54" flexible drill bit. Everything you need to pull up to 9/16" O.D. wire. Complete kit used for drilling and pulling wire and cable. Flexible drill bit ( 53718) makes 9/16" holes in wood. Use placement tool ( 53715) to guide bit through walls. Pulling grip ( KPS050) attaches to the flexible drill bit after the hole has been made and pulls 1/2" 9/16" wire and cable. Flex Bit Kit Kit Contains Weight (lbs.) 53721 2.00 Description 53715 flex bit placement tool 53718 flex drill bit - 9/16" x 54" KPS050 pulling grip - 1/2" 9/16" 53721 NOTE: Read and follow safety instructions in power tool owner's manual. 5
Knockout Punches Knockout Punch Set Knockout Punch Set with Wrench Set includes: 1" ratcheting wrench, knockout punches, dies and draw studs for 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2" conduit sizes. 53727 53728 Optimized design reduces wrench effort. Slugs are split inside for easy removal. Maximum capacity of 10 gauge mild steel. Also cuts aluminum, fiberglass and plastic. Punches holes cleanly and accurately. Set includes 1/2" or 3/4" punch and die with draw stud. Cutting capacity 10 gauge mild steel; also cuts aluminum, fiberglass and plastic. Splits slugs for easy removal. Punches holes cleanly and accurately. Kit includes six different size knockout punches and dies, two draw studs and ratcheting box end wrench. Length Conduit Size Weight (lbs.) 53727 4" 3/4" (19 mm) 1.00 53728 2-5/8" 1/2" (12.5 mm) 1.00 53732 Weight (lbs.) 53732 9.00 Description punch-die 1/2" punch-die 3/4" punch-die 1" punch-die 1-1/4" punch-die 1-1/2" punch-die 2" 1" ratcheting wrench WARNING: Do NOT push or hammer wrench. WARNING: Do NOT extend handle length of wrench. 6 NOTE: Read and follow safety instructions in power tool owner's manual.
6" Electrician's Level Large, high visibility vials are easy to read. Unique 3 point design holds securely to pipe. For use in measuring bends in conduit. Machined billet aluminum design. Strong Rare Earth magnets firmly hold the level to ferrous metals. High contrast laser etched markings for high visibility readings. Overall Length Weight (lbs.) 931-6RE 6" 1.00 9" Torpedo Level 931-6RE Levels Large high visibility vials are easy to read. Strong Rare Earth magnets firmly hold the level to ferrous metals. Machined billet aluminum design. High contrast laser etched markings. Easy to read vials set for measurements at 0, 30, 45 and 90 degrees. 932-9RE Overall Length Weight (lbs.) 932-9RE 9" 1.00 Step Drill Bits Step Drills Laser-etched hole sizes are easy to read and permanent. Works in most metals, plastic and wood. Self-starting Speedpoint tip starts six times faster. Single-flute cutter for a true round hole every time. Tri-lobe shank for firm grip in drill chuck. Quick Reference Number No. of Hole Sizes per Bit 59009 9 10 in 1/8" increments 59014 14 12 in 1/16" increments Size Range (Hole Diameter) Pilot Hole Required Electric Drill Size 1/4" to 1-3/8" no 1/2" and larger 3/16" to 7/8" no 3/8" and larger Note: Read and follow safety instructions in power tool owner s manual. Speedpoint TM is a registered trademark of Irwin Industrial Tools. Depth Penetration for Each Step 1/8".15 Weight (lbs.) 1/8".60 59009 59014 NOTE: Read and follow safety instructions in power tool owner's manual. 7
Ship-Auger Bits Ship-Auger Bits with Screw Point Bits drill through nails, wood, vinyl, plastics, and heavy timber. Special bit steel with machine-ground flutes and polished edges for smooth, wobble-free boring. Feed-screw pilot draws bit into wood. Full length is heat-treated and tempered. Deep, open-throat design clears chips for faster, cleaner cuts. Shanks are 7/16" hex to fit 1/2" and larger three-jaw chucks. Head and twist are ground to correct clearance for easy removal from hole. For heavy construction and repair work in mines, on docks and bridges, and for electrical work. Bit Size Overall Length Weight (lbs.) 53437 3/4" (19 mm) 18-1/2'' (470 mm) 2.00 53439 7/8" (22 mm) 18-1/2'' (470 mm) 2.00 53441 1" (25.4 mm) 18-3/4'' (476 mm) 2.00 Hole Saws Bi-Metal Recessed Light Hole Saw For 6" recessed lights. Makes precise holes in drywall and ceiling tile. Recommended for most major brands of 6" recessed lighting fixtures. For use in drywall, ceiling tile, steel, wood, plastic, stainless steel and cast iron. Use with Klein Tools arbor 31670 or 31670-SEN (Sold separately). Saw Diameter For Use with Arbor No. Weight (lbs.) 31600 6-3/8" (161 mm) 31670 2.00 53441 31600 Hole Saw Arbor with Pins 118 split point pilot bit. Use with Klein hole saws: 1-1/4" 6-7/8". Pins lock the saw to prevent over-tightening. Hardened mandrel for long thread life. Shank Style Pins Shank Size 31670 hexagonal threaded 7/16" (11 mm) Electric Drill Size Thread Size 1/2" & larger 5/8" - 18".55 Weight (lbs.) 31670 8 NOTE: Read and follow safety instructions in power tool owner's manual.
Quick Cutter Adjustable Hole Saw Adjustable saw cuts 2-1/2" 7" holes. Carbide coated blades for longer blade life. Cuts holes in drywall and ceiling tile. Hole saw blades adjust to cut holes from 2-1/2" to 7" in diameter. Long-life carbide coated blades. Dust shield included. Range Weight (lbs.) 53731 2-1/2" - 7" 1.00 Quick Cutter is a registered trademark of Speare Tools. Jab Saw Cuts drywall, wallboard, plywood, and plastic. Triple ground teeth for a fast cut. Blade cuts in both directions (push and pull). Hardened, carbon steel blade for durability. Hardened, beveled blade point for scoring and plunge cuts. Comfort-cushion grip with thumb groove. Handle structure designed for strength and durability. Flat-end grip for palming or punching through drywall. Hole Saws 53731 Jab Saw 725 Blade Length Overall Length Weight (lbs.) 725 6" (152 mm) 12" (305 mm).90 8 Piece Hole Saw Kit 8 piece set contains the most popular sizes for electrical work. Saw diameters are 7/8" (22 mm), 1-1/8" (29 mm), 1-3/8" (35 mm), 1-3/4" (44 mm), 2" (51 mm), and 2-1/2" (64 mm). Packed in a rust-proof, plastic molded carrying case. Kit Contains Weight (lbs.) 31630 3.00 Size 31514 7/8" 31518 1-1/8' 31522 1-3/8" 31528 1-3/4" 31532 2" 31540 2-1/2' 31660 arbor 31670 arbor WARNING: Never use blade as a prying device as blades may break & cause injury. Hole Saw Kit WARNING: Always ensure that you and persons in the vicinity wear approved eye protection. Set pilot drill point 1/8" beyond tooth points. 31630 NOTE: Read and follow safety instructions in power tool owner's manual. 9
Armored Cable Cutter BX and Armored Cable Cutter Cuts BX and 3/8" armored cable. Eliminates burrs. Does not nick cable. Easily cuts 3/8" flexible conduit and #10, 12, and 14 armored cables with up to 4 wires with a couple of turns of the handle. Depth of cut adjusts between standard MC and reduced diameter MC. Extra blade storage in handle. Use with Klein Tools replacement blade 53726 or 53726-SEN. 53725 2.00 BX Cutter Replacement Blade Weight (lbs.) Replacement blade for use with Klein Tools cable cutter 53725 or 53725-SEN. 53726.1 Cable Cutter Weight (lbs.) 53726 53725 Utility Cable Cutter Shear-type hook jaws grab and hold cable while shear-cutting action makes clean cuts. Forged steel with black-oxide finish for long life. Beveled tips for positive mating. Hinge bolt with pin-set nut for proper blade tension. Not designed for cutting steel or ACSR. Maximum cable cutting 350 MCM copper and aluminum. Non-slip vinyl grips. Overall Length MCM Cable-Cutting Maximum Capacity Handle Color 63035 Weight (lbs.) 63035 16-3/4" (425 mm) 350 copper, 350 aluminum red 3.00 Tubing Cutter Electrician s Tubing Cutter Patented cutting wheel cuts and cleanly snaps the conduit without leaving a burr inside. Can be used to cut conduit with wire no wire damage. Used for cutting 1/2" and 3/4" EMT Conduit. Easy to use tighten handle, cut the circumference of the conduit, snap the conduit. 53730 Length Conduit Diameter Weight (lbs.) 53730 7" - 8-1/4" cuts 1/2" and 3/4" EMT conduit 2.00 10 NOTE: WARNING: Read and Never follow use safety on or instructions near live electrical in power circuits. tool owner's manual.
PVC Cutter Cuts up to 3/4" schedule 40 PVC. Makes clean burr-free cuts in PVC and flexible pipe. Reversible blade doubles life. Cuts 1-3/8" O.D. flexible plastic pipe. Steel construction for strength. Guide helps cut pipe squarely. Handle latch keeps tool closed. PVC Capacity Flexible Pipe Capacity Weight (lbs.) 50506 3/4" schedule 40 1-3/8" 1.00 WARNING: Do NOT use to cut metallic pipes or cable wire. WARNING: Do NOT cut cold PVC. PVC Cutting 50506 Fasteners Conical Anchor Kit 100 Fasteners Kit contains: 100 #2 Phillips, #10 x 1" Screws, and 100 wall anchors. Masonry drill bit also included. Anchor Size Screw Size Bit Size Weight (lbs.) 53729 #10-12 #10 x 1" 1/4" 1.00 53729 NOTE: WARNING: Read and Never follow use safety on or instructions near live electrical in power circuits. tool owner's manual. 11
Introducing...Holemaking Products Klein carries an extensive selection of Holemaking tools and accessories. These top-of-the-line products provide accuracy, consistency, strength and long lasting performance to meet the needs of professionals. View a complete selection in our catalog or online @ kleintools.com. F o r P r o f e s s i o n a l s... S i n c e 1 8 5 7 www.kleintools.com Klein Tools, Inc. 450 Bond Street Lincolnshire, IL 60069-1418 Phone: 847-821-5500 Toll free: 800-553-4676 fax: 800-553-4876 2009 Klein Tools, Inc. Printed in U.S.A. 99815