simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis Vice 46 86 5-Axis Vice 77 90 5-Axis Vice 125 94 Makro Grip Dual Vice 96 Retrofitting kit for 5-Axis Vice Engineering: As varied as the application tasks in the engineering industry are, as broad are the possible applications of our workholding products. The high reliability and innovation power combined with the simplicity and universal applicability provide not only advantages for large engineering companies, but also increase the efficiency of each supplier. 65
Benefits HIGHEST PROCESS RELIABILITY ENORMOUS MATERIAL SAVINGS INCREASED MILLING QUALITY STAMPING TECHNOLOGY Makro Grip Stamping Unit Applications At a glance Patented form-closure technology External stamping of workpieces with up to 20t hydraulic pressure Minimal preparatory work required Tremendous material savings due to minimal clamping edge requirements 67
The patented Form-Closure Technology by LANG The Original! Form-Closure Technology makes LANG clamping the very best in 5-axis machining. Form-Closure Technology guarantees maximum holding power with minimal clamping force. The following pages explain the stamping technique in detail and how it affects 5-face machining with the Makro Grip vice: Makro Grip The compact 5-axis vice with Form-Closure Technology The external stamping of the workpiece relieves the 5-axis vice. While traditional machining vices with serrated teeth have to work double duty (1. indent the material, 2. hold the workpiece), the Makro Grip 5-axis vice s function is limited to only holding the workpiece. The compact build of the Makro Grip 5-axis vice is possible due to the requirement of much lower clamping forces. The advantages are shown over the following pages: The cause and effect principle of the 5-axis vice: Lower clamping pressure The cause and effect principle of Stamping and Form-Closure Technology: No material deformation Reduced wear on the vice Compact design Form-Closure Technology Higher longevity Better accessibility Lower weight Smaller footprint in machine Exceptional holding power Use of shorter tools possible Ergonomic handling More options within the work envelope Minimal clamping edge requirement High cutting rate Reduced vibrations on workpiece Reduced vibrations on workpiece Shortened machining time Enormous material savings Minimal material removal Shortened machining times High accuracy High tool life Improved surface quality Resource protection Reduction of costs per piece Increase of milling quality High process reliability Increased milling quality Reduction of purchasing costs Increased milling quality Reduction of costs per piece Relieve strain on employees Better usage of capacity 68 69
A reliable wear-free clamping process for high-tensile materials! In contrast to traditional machining vices, which clamp a workpiece with a maximim of 6 tons, Form-Closure Technology with external stamping adds the form-closure contour indents to the workpiece with up to 20 tons of hydraulic pressure. This allows you to clamp even high-tensile materials up to 1500 N/mm² tensile strength (e.g. Titanium and Inconel) reliably and virtually wear-free. Different Tensile strength Rm N/mm ² 1500 1300 1100 material hardness requires different stamping jaws to extend longevity and guarantee safe clamping. Our standard jaws allow you to stamp workpieces up to 35 HRC while high-tensile materials up to 45 HRC require High-End stamping jaws. High-End stamping jaws Functional principle of the Stamping Technology: 5 seconds that revolutionise your machining processes! 1 Sawing of blank with minimum addition of clamping 2 depth. Stamping realised within 3 5 seconds. 900 700 Standard stamping jaws 20 22 24 26 28 30 32 34 36 38 40 42 44 Hardness HRC Adjusting the stamping pressure and depth properly Making a precise statement about the correct stamping pressure To increase longevity of the High-End stamping jaws for high-tensile is relatively difficult due to various alloys (compositions of the materials, we recommend lower stamping pressure and accordingly material). The two major parameters are the workpiece width and its less deep control marks than in materials with a tensile strength material. Basically we recommend to start always with low stamping < 1.000 N/mm². pressure and then to slowly increase it incrementally until the right stamping depth is achieved. The following table should provide a rough orientation regarding the applied stamping pressure. Depending on the material and surface With standard stamping jaws the correct stamping depth is reached condition the pressure may vary substantially from this data! when the control marks between the holding teeth have a depth of approx. 0.1 mm. 3 Correct stamping depth is reached when the control marks 4 Secure holding power with low clamping force and a between indentations have a max. depth of 0.1 mm. minimum clamping depth of only 3 mm. BEFORE BEFORE Tensile strength - stamping pressure ratio Tensile strength Rm Length of blank (stamping width) 50 mm Length of blank (stamping width) 126 mm 200 N/mm² 25 bar 50 bar 400 N/mm² 50 bar 100 bar 600 N/mm² 75 bar 150 bar 800 N/mm² 100 bar 200 bar 1000 N/mm² 125 bar 250 bar AFTER AFTER 70 71
Makro Grip Stamping Unit Makro Grip Stamping Unit the ideal introduction to the Stamping Technology Stamping trolley with Makro-Grip Stamping Unit, standard NEW 1 Convenient adjustment of the stamping pressure 1 The centre marking tool enables an exact and centric positioning of blanks in 5-Axis Vices - even without endstops. See on page 76. 1 5 6 2 Robust steel hydraulic housing with integrated T-slot key 3 Operated pneumatically by hand or foot 4 Scaled endstop for quick positioning of blanks 2 4 5 Pneumatic-hydraulic power multiplier 2 7 with visible oil-level display 6 Easily readable hydraulic pressure gauge 3 8 7 Quick adjustment of stamping width for different part sizes 3 4 8 Stamping jaws for all materials up to 35 HRC (45 HRC). Stamping force up to 20 tons 1 Makro Grip Standard Stamping Unit with a stamping range up to 245 mm 2 T-slot plate can be retrofitted 4 Broad space on the plastic tray that can be used e.g. for preparing vices or for depositing tools, etc. Makro-Grip Stamping Unit for work benches Scope of delivery: Stamping vice Stamping jaws with parallels, 3 mm Pneumatic-hydraulic power multiplier (1-360 bar) Pneumatic switch for hand or foot operation Gauging blocks for measuring wear of stamping teeth Scaled workpiece endstop Protection shield Item no. Type Max. stamping range Type of stamping jaws Weight Price 41200 Standard 245 mm 41350 Extended 355 mm 41200-HE Standard 245 mm 41350-HE Extended 355 mm Standard stamping jaws for materials up to 35 HRC Standard stamping jaws for materials up to 35 HRC High-End stamping jaws for materials up to 45 HRC High-End stamping jaws for materials up to 45 HRC 76 kg 84 kg 76 kg 84 kg 3 Practical, rigid trolley for a flexible and mobile use Stamping trolley with Makro Grip Stamping Unit, standard Scope of delivery: Stamping vice Stamping jaws with parallels, 3 mm Workshop trolley Pneumatic-hydraulic power multiplier (1-360 bar) Pneumatic switch for hand or foot operation Gauging blocks for measuring wear of stamping teeth Scaled workpiece endstop Protection shield Item no. Type Max. stamping range Type of stamping jaws Weight Price 41521 41521-HE Standard 245 mm Standard stamping jaws for materials up to 35 HRC High-End stamping jaws for materials up to 45 HRC 210 kg 72 73
Stamping trolley with Makro Grip Stamping Unit Stamping trolley with Makro Grip Stamping Unit, extended, on T-slot plate NEW LOOK Stamping trolley with Makro Grip Dual Stamping Unit, extended, on T-slot plate NEW LOOK 1 3 2 1 Large stamping range up to 355 mm 2 Practical, rigid trolley for a flexible and mobile use 3 T-slot plate included allowing a second stamping unit to be retrofitted easily with marking bores or T-slots. Stamping trolley with Makro Grip Dual Stamping Unit, extended, on T-slot plate Scope of delivery: 2 stamping vices T-slot plate 596 x 496 mm 2 pairs of stamping jaws with parallels, 3 mm Workshop trolley Pneumatic-hydraulic power multiplier (1-360 bar) Pneumatic switch for hand or foot operation Gauging blocks for measuring wear of stamping teeth 2 Scaled workpiece endstop 2 Protection shields Item no. Type Max. stamping range Type of stamping jaws Weight Price 41402 41402-HE Extended 2 x 355 mm Standard stamping jaws for materials up to 35 HRC High-End stamping jaws for materials up to 45 HRC 350 kg Stamping trolley with Makro Grip Stamping Unit, extended, on T-slot plate Scope of delivery: Stamping vice T-slot plate 596 x 496 mm Stamping jaws with parallels, 3 mm Workshop trolley Pneumatic-hydraulic power multiplier (1-360 bar) Pneumatic switch for hand or foot operation Gauging blocks for measuring wear of stamping teeth Scaled workpiece endstop Protection shield Item no. Type Max. stamping range Type of stamping jaws Weight Price 41400 41400-HE Extended 41140 Additional extended stamping vice for 41140-HE dual stamping 355 mm Standard stamping jaws for materials up to 35 HRC High-End stamping jaws for materials up to 45 HRC Standard stamping jaws for materials up to 35 HRC High-End stamping jaws for materials up to 45 HRC 300 kg 50 kg The dual stamping unit is ideal for preparing long blanks with two stamping vices simultaneously and clamping these stamped parts accordingly in two 5-Axis Vices on the machine-tool table. The distance of the two units can be adjusted individually using the T-slots or via a 25 mm pitch of marking bores. Additionally there are marking bores to match the distance of Quick Point Grid Plates as well as the Makro Grip workholding devices. 74 75
Makro Grip Stamping Unit Accessories Centre Marking Tool for Stamping Unit The centre marking tool plunges a notch above the stamping contour at the centre of the part. This marking allows the exact and centric positioning of parts in Makro Grip 5-Axis Vices without any endstops. Centre Marking Tool Item no. Description Price 41010 Centre marking tool Stamping Jaws - Standard and High-End version Standard Stamping Jaws with parallels Item No. For material Clamping depth of workpiece 41111 up to 35 HRC 3 mm Standard stamping jaws for all materials up to 35 HRC. Price 41010-01 Spare marking stud The centre marking tool will be mounted to moveable jaw of the stamping unit with two M 6 x 14 screws (included). High-End Stamping Jaws with parallels Item No. For material Clamping depth of workpiece Price 41112 up to 45 HRC 3 mm High-End stamping jaws for all high-tensile materials up to 45 HRC. Reconditioning Stamping Jaws Gauging Blocks for measuring wear of Stamping Jaws Gauging Blocks for measuring wear of Stamping Jaws Item no. Description Price 41020 3 pcs. Creating trust! Always the same clamping quality. To ensure consistent holding power in the clamping device, it is necessary to check the wear of the stamping teeth regularly. Reconditioning Stamping Jaws Item No. Description Price 41111-01 Standard stamping jaws 41112-01 High-End stamping jaws When the stamping teeth are worn out the jaws can be reconditioned up to 6 times. During every reconditioning process the total thickness will be reduced about 0.5 mm (allowed minimum thickness of jaw: 15 mm). In order to maintain the original thickness of 18 mm we will supply suitable shims when returing the jaws. In order to bridge the time of the reconditioning process we suggest keeping a second pair of stamping jaws in reserve! Position one gauging block with slots on each side of the stamping jaws. Tighten the jaws by hand only, do not actuate the switch! Make sure that the stamping teeth are placed in the grooves of the gauging blocks. When the indicator block fits between the stamping contour, the jaws need to be sent in for reconditioning. 76 77
Benefits HIGHEST HOLDING POWER GUARANTEED PROCESS SAFETY STAMPING TECHNOLOGY Makro Grip 5-Axis Vice BEST ACCESSIBILITY Applications At a glance Best accessibility for 5-face machining operations Exceptional holding power with lowest clamping forces due to the patented stamping technology High repeat accuracy for inserting workpieces without any endstops Easy and flexible handling due to lightweight vices 79
1 2 3 Makro Grip 5-Axis Vice Compact and unmatched holding power for the 5-face machining of blanks 4 5 1 Reversible jaws equipped with double-sided holding teeth contour (same toothing for all types of vices, 3 mm clamping height) and additional clamping support for non-stamped parts 2 Centring accuracy ± 0.02 mm 3 Rigid and sturdy base - but still lightweight and handy Form-Closure Technology Clamping force [N] 20.000 18.000 16.000 14.000 12.000 10.000 8.000 6.000 4.000 2.000 10 20 30 40 50 60 70 80 90 100 Thanks to the form-closure technology, workpieces can be securely clamped with low clamping pressure. Deformation and distortion of the material while clamping and releasing is impossible! This diagram highlights the relation between the clamping pressure and the resulting clamping force. Torque [Nm] 6 4 Threads for mounting individual add-on jaws, parallels or endstops 5 Double guided jaws 6 Equipped with clamping studs for Using a torque wrench For a reliable and safe clamping process, we recommend the use of a conventional torque wrench. precise clamping in the Quick Point zero-point clamping system The reversible jaws are changed over within one minute. A larger clamping range is achieved and interferences are eliminated. To keep the spindle free of chips and debris we offer spindle covers made of plastic or foam. Please see pages 84, 88, 92. Cordless Drill Attachment Technical specifications and compatibility Assembling aid for Makro Grip 77 and 125 You will find icons on the specific product pages to make it more user-friendly and to highlight the technical specifications and the compatibility of our products: Ø 20 mm Grid system: Pitch of the zero-point system 96 max. 70 Nm Clamping stud size: Diameter of the clamping studs max. 14000 N Torque: Maximum allowed torque Clamping force: Clamping force at maximum torque ± 0,02 mm Centring accuracy: Centring tolerances of vices Automatable: Automation interface included Cordless Drill Attachment Item No. For Price 47005 internal hexagon 5 mm The cordless drill attachment is used to achieve centring accuracy of the jaws easier when exchanging them, especially with longer vice bases. You will also speed-up the exchange or reversal of jaws by using a cordless drill. 80 81
Makro Grip 5-Axis Vice 46 Makro Grip 5-Axis Vice 46 12 H6 M8 40 / 80 / 120 52 77 / 117 / 157 77 65/105/145 46 62 53 45 SW8 65 0 22 52 Ø 16 mm max. 30 Nm max. 6000 N ± 0,02 mm Makro Grip 5-Axis Vice 46 Item No. Base length Clamping range Weight Price 47065 77 mm 0-65 mm 1.7 kg 47105 1 0-105 mm 2.5 kg 47145 157 mm 0-145 mm 3.3 kg 82 83
Makro Grip 46 Spare Parts Makro Grip 46 Spare Parts & Accessories Spare jaws for Makro Grip 5-Axis Vice 46 Item No. For Weight Quantity Price 47046-20 all Makro Grip 46 0.3 kg 1 pair In order to achieve best centring accuracy it is necessary to replace both jaws in case of a damage. Tungsten-Carbide-Coating for Makro Grip 46 jaws Item No. For Quantity Price 45046-17 all Makro Grip 46 per pair A special Tungsten-Carbide-Coating can be applied on the jaws planar surfaces in order to intensify the friction when clamping non-stamped workpieces. Attention: Included in price is only the coating, not the jaws. Optionally available jaws Avanti Base Jaws for Makro Grip 5-Axis Vice 46 Item No. Dimensions Weight Quantity Price 44461 55 x 36 mm 0.5 kg 1 pair The flexible quick jaw exchange system Avanti can be used for clamping profile parts and complements the raw part machining with Makro Grip gripping jaws perfectly. More information on page 102. Suitable add-on jaws can be found on page 105. Profile Clamping Jaws for Makro Grip 5-Axis Vice 46 Item No. Dimensions Weight Quantity Price 47469 46 x 21 x 20 mm 0.4 kg 1 pair Sufficient steel body for optimised profile milling. Profile clamping jaws are mounted integrally on the vice. The guideways are hardened, whereas the profile block is soft. Spare Spindle + Centre Piece for Makro Grip 5-Axis Vice 46 Item No. For Weight Price 4046082 47065 0.08 kg 4046122 47105 0.10 kg 4046162 47145 0.12 kg Threaded spindle with low-wear TIN coating. Including centre piece and dowel pins. Centre Jaw + Spindle for Makro Grip 5-Axis Vice 46 When assembling this kit the 5-Axis-Vice will be transformed into a dual clamping vice for processing two or more parts simultaneously. More information on page 94. Foam Spindle Covers for Makro Grip 5-Axis Vice 46 Item No. Material Quantity Price 47046-80 Foam 10 pcs. The foam covers are placed on the spindle between the opened jaws. Upon tightening the vice, the foam is almost fully compressed returning to its original size on release. 84 85
Makro Grip 5-Axis Vice 77 Makro Grip 5-Axis Vice 77 12 H6 M8 52/70/110/150 52 102/130/170/210 77 85/120/160/200 77 62 51 38 SW12 65 0 22 52 Ø 16 mm max. 70 Nm max. 14000 N ± 0,02 mm Makro Grip 5-Axis Vice 77 Item No. Base length Clamping range Weight Price 47085 102 mm 0-85 mm 2.7 kg 47120 130 mm 0-120 mm 3.1 kg 47160 170 mm 0-160 mm 3.7 kg 47200 210 mm 0-200 mm 4.4 kg 86 87
Makro Grip 77 Spare Parts Makro Grip Spare Parts & Accessories Spare jaws for Makro Grip 5-Axis Vice 77 Item No. For Weight Quantity Price 47085-20 47085 47077-20 47120, 47160, 47200, 46160 0.8 kg 1 pair In order to achieve best centring accuracy it is necessary to replace both jaws in case of a damage. Tungsten-Carbide-Coating for Makro Grip 77 jaws Item No. For Quantity Price 45077-17 all Makro Grip 77 per pair A special Tungsten-Carbide-Coating can be applied on the jaws planar surfaces in order to intensify the friction when clamping non-stamped workpieces. Attention: Included in price is only the coating, not the jaws. Optionally available jaws Avanti Base Jaws for Makro Grip 5-Axis Vice 77 Item No. Dimensions Weight Quantity Price 44771 77 x 57 mm 1.5 kg 1 pair The flexible quick jaw exchange system Avanti can be used for clamping profile parts and complements the raw part machining with Makro Grip gripping jaws perfectly. More information on page 102. Suitable add-on jaws can be found on page 107. Profilo Base Jaws for Makro Grip 5-Axis Vice 77 Item No. Dimensions Weight Quantity Price 49771 112 x 46 mm 1.5 kg 1 pair Highly flexible base jaws for various clamping applications such as profile clamping jaws or self-made add-on jaws. Spare Spindle + Centre Piece for Makro Grip 5-Axis Vice 77 Item No. For Weight Price 4077102 47085 0.18 kg 4077135 47120 0.24 kg 4077175 47160 0.28 kg 4077215 47200 0.34 kg Threaded spindle with low-wear TIN coating. Including centre piece and dowel pins. Foam Spindle Covers for Makro Grip 5-Axis Vice 77 Item No. Material Field of application 47077-70 Plastic Batch production 47077-80 Foam Single piece production Quantity 10 pcs. Price The foam covers are placed on the spindle between the opened jaws. Upon tightening the vice, the foam is almost fully compressed returning to its original size on release. Plastic covers can be trimmed to the respective clamping range. More information on page 110. Suitable add-on jaws can be found on page 112. Vario Tec Jaws for Makro Grip 5-Axis Vice 77 Item No. Weight Quantity Price 42077 1.3 kg More information on page 116. 1 Set (2 pin jaws + 2 carrier jaws) The well-established positioning and resting system is now available for regular Makro Grip 5-Axis Vices. Profile Clamping Jaws for Makro Grip 5-Axis Vice 77 Item No. Dimensions Weight Quantity Price 47779 77 x 35 x 30 mm 1.6 kg 1 pair Sufficient steel body for optimised profile milling. Profile clamping jaws are mounted integrally on the vice. The guideways are hardened, whereas the profile block is soft. Centre Jaw + Spindle for Makro Grip 5-Axis Vice 77 When assembling this kit the 5-Axis-Vice will be transformed into a dual clamping vice for processing two or more parts simultaneously. More information on page 94. 88 89
Makro Grip 5-Axis Vice 125 Makro Grip 5-Axis Vice 125 16 H6 M10 90/125/175/ 225/275 96 160/210/260/310/360 125 155/205/255/305/355 125 86 75 57 SW12 89 0 22 96 Ø 20 mm max. 100 Nm max. 20000 N ± 0,02 mm Makro Grip 5-Axis Vice 125 Item No. Base length Clamping range Weight Price 47155 160 mm 0-155 mm 9.0 kg 47205 210 mm 0-205 mm 10.9 kg 47255 260 mm 0-255 mm 12.8 kg 47305 310 mm 0-305 mm 15.2 kg 47355 360 mm 0-355 mm 17.6 kg 90 91
Makro Grip 125 Spare Parts Makro Grip 125 Spare Parts & Accessories Spare jaws for Makro Grip 5-Axis Vice 125 Item No. For Weight Quantity Price 47125-20 all Makro Grip 125 2.7 kg 1 pair In order to achieve best centring accuracy it is necessary to replace both jaws in case of a damage. Optionally available jaws Avanti Base Jaws for Makro Grip 5-Axis Vice 125 Item No. Dimensions Weight Quantity Price 44251 125 x 69 mm 3.6 kg 1 pair The flexible quick jaw exchange system Avanti can be used for clamping profile parts and complements the raw part machining with Makro Grip gripping jaws perfectly. Tungsten-Carbide-Coating for Makro Grip 125 jaws Item No. For Quantity Price 45125-17 all Makro Grip 125 per pair A special Tungsten-Carbide-Coating can be applied on the jaws planar surfaces in order to intensify the friction when clamping non-stamped workpieces. Attention: Included in price is only the coating, not the jaws. Spare Spindle + Centre Piece for Makro Grip 5-Axis Vice 125 Item No. For Weight Price 4025165 47155 0.54 kg 4025215 47205 0.66 kg 4025265 47255 0.76 kg 4025315 47305 0.86 kg 4025365 47355 0.98 kg Threaded spindle with low-wear TIN coating. Including centre piece and dowel pins. Spindle Covers for Makro Grip 5-Axis Vice 125 Item No. Material Field of application 47125-70 Plastic Batch production 47125-80 Foam Single piece production Quantity 10 pcs. Price The foam covers are placed on the spindle between the opened jaws. Upon tightening the vice, the foam is almost fully compressed returning to its original size on release. Plastic covers can be trimmed to the respective clamping range. More information on page 102. Suitable add-on jaws can be found on page 109. Profilo Base Jaws for Makro Grip 5-Axis Vice 125 Item No. Dimensions Weight Quantity Price 49251 160 x 57 mm 4.0 kg 1 pair Highly flexible base jaws for various clamping applications such as profile clamping jaws or self-made add-on jaws. More information on page 110. Suitable add-on jaws can be found on page 113. Vario Tec Jaws for Makro Grip 5-Axis Vice 125 Item No. Weight Quantity Price 42125 4.8 kg More information on page 116. 1 Set (2 pin jaws + 2 carrier jaws) The well-established positioning and resting system is now available for regular Makro Grip 5-Axis Vices. Profile Clamping Jaws for Makro Grip 5-Axis Vice 125 Item No. Dimensions Weight Quantity Price 47259 125 x 47 x 40 mm 5.0 kg 1 pair Sufficient steel body for optimised profile milling. Profile clamping jaws are mounted integrally on the vice. The guideways are hardened, whereas the profile block is soft. Centre Jaw + Spindle for Makro Grip 5-Axis Vice 125 When assembling this kit the 5-Axis-Vice will be transformed into a dual clamping vice for processing two or more parts simultaneously. More information on page 94. 92 93
Makro Grip Dual Clamping Vice Makro Grip Dual Clamping Vice Retrofitting Kit for 5-Axis Vices Scope of delivery: Centre jaw with 2-sided tooth contour along with the spindle. With a built in override, it is possible to clamp workpieces securely that have up to 2 mm difference (cutting tolerance) in length! Transform your Makro Grip 5-Axis vice into a Dual Clamping Vice within a few seconds! To remove the Makro Grip jaws from the base unit, unscrew the jaws using an Allen key. To increase the work area between the workpieces (which allows for a larger diameter tool size to be used) we offer a wider (27 mm) centre jaw for the 77 mm and 125 mm vices. Flip base unit and remove the centre screw with an Allen key. Remove spindle and centre piece. (If necessary use a mallet and drift punch.) Insert the centre jaw + spindle and tighten the screw on the bottom side. Assemble the Makro Grip jaws back onto the base. You are able to use your Makro Grip Vice as a dual vice now. 94 95
Makro Grip Dual Clamping Vice Kits Makro Grip Dual Clamping Vice Kits For retrofitting existing Makro Grip 5-Axis Vice to Dual Clamping Vices. 25/45/65 14 25/45/65 46 Centre Jaw + Spindle for Makro Grip 5-Axis Vice 46 62 53 45 SW8 65 Item no. For Makro Grip Centre jaw width Spindle length Clamping range Price 47065-TG 47065 14 mm 82 mm 2 x 25 mm 12 H6 M8 0 22 10/25/45/65 2x 47105-TG 47105 14 mm 122 mm 2 x 45 mm 47145-TG 47145 14 mm 162 mm 2 x 65 mm Centre Jaw + Spindle for Makro Grip 5-Axis Vice 77 Item no. For Makro Grip Centre jaw width Spindle length Clamping range Price 52 12 H6 M8 102/130/170/210 77 5/20/40/60 2x 47085-TG17 2 x 35 mm 47085 102.5 mm 47085-TG27 27 mm 2 x 30 mm 47120-TG17 2 x 50 mm 47120 135 mm 47120-TG27 27 mm 2 x 45 mm 47160-TG17 2 x 70 mm 47160 175 mm 47160-TG27 27 mm 2 x 65 mm 47200-TG17 2 x 90 mm 47200 215 mm 47200-TG27 27 mm 2 x 85 mm 52 102/130/170/210 77 16 H6 M10 2x 30/55/80/105/130 Centre Jaw + Spindle for Makro Grip 5-Axis Vice 125 Item no. For Makro Grip Centre jaw width Spindle length Clamping range Price 47155-TG17 2 x 65 mm 47155 165 mm 47155-TG27 27 mm 2 x 60 mm 96 160/210/260/310/360 125 47205-TG17 2 x 90 mm 47205 215 mm 47205-TG27 27 mm 2 x 85 mm 16 H6 M10 25/50/75/100/125 2x 47255-TG17 2 x 115 mm 47255 265 mm 47255-TG27 27 mm 2 x 110 mm 47305-TG17 2 x 140 mm 47305 315 mm 47305-TG27 27 mm 2 x 135 mm 96 160/210/260/310/360 125 47355-TG17 2 x 165 mm 47355 365 mm 47355-TG27 27 mm 2 x 160 mm 96 97