WORKHOLDING DEVICES AND ELEMENTS UNIVERSAL STRAP CLAMP For power presses, milling, drilling, shaping and boring. Supplied complete with T-Bolt, Nut etc. USC-(a) USC-(b) USC-(a) USC-(b) USC-(a) USC-(b) USC-(a) USC-(b) MOULD CLAMP 0-0- 0-0- 0-0 0-0 For mould clamping on plastic injection moulding & pressure die casting machines. Supplied complete with T-Bolt or Stud and Nut etc. MOULD CLAMP - WITH STUD MC- MC- MC- MC- DIA x PITCH x STUD M- x 1. x STUD M- x.0 x 5 STUD M- x.5 x 1 STUD M- x 3.0 x 0 MOULD CLAMP - WITH T- BOLT MC-(a) MC-(b) MC-(a) MC-(b) MC-(a) MC-(b) MC-(a) MC-(b) MOULD CLAMP - FORGED 'TOOLFAST' mould clamp is now available in forged steel body for extra strength. MOULD CLAMP - WITH STUD MCF- MCF- MCF- MCF- DIA x PITCH x STUD M- x 1. x STUD M- x.0 x 5 STUD M- x.5 x 1 STUD M- x 3.0 x 0 MOULD CLAMP - WITH T- BOLT MCF-(a) MCF-(b) MCF-(a) MCF-(b) MCF-(a) MCF-(b) MCF-(a) MCF-(b) COMPACT MILLING CLAMP The most multi-purpose, quick and easy to use down-hold milling clamp. CMC- CMC- CMC- CMC- LOW PINCH CLAMP For side clamping on VMC, milling, shaping, planning, jig boring etc. PC-1(a) PC-1(b) PC- PC-3 PC-4(a) PC-4(b) PC-5(a) PC-5(b) CLAMP HEAVY DUTY PINCH CLAMP 1 1 5 5 0 0 0 0 For side clamping of thicker plates on VMC, milling, planning, plano-milling etc. HDPC-1(a) HDPC-1(b) HDPC-(a) HDPC-(b) HDPC-3 0-5 0-5 0-5 0-5 FOR CLAMP 00kgs. 00kgs. 00kgs. 00kgs. BLOCK FOR CMC CLAMP : By stacking one Height block over another and a CMC clamp at the top can enable clamping of any height of workpiece. Each height block model HB-CMC- increases clamping height range by mm. STOP FOR PINCH CLAMPS ST-PC-1A ST-PC-1B ST-PC- ST-PC-3 ST-PC-4A ST-PC-4B ST-PC-5A ST-PC-5B ST-HDPC-1A ST-HDPC-1B ST-HDPC-A ST-HDPC-B ST-HDPC-3 FOR PINCH CLAMP PC-1(a) PC-1(b) PC- PC-3 PC-4(a) PC-4(b) PC-5(a) PC-5(b) HDPC-1(a) HDPC-1(b) HDPC-(a) HDPC-(b) HDPC-3 FORCE 5 5 5 5 5 Height Block HB-CMC- Stop or Stopper block to be mounted on the opposite side of workpiece while clamping with PC Series or HDPC series pinch clamps. 55 55 66 66 LOW PINCH CLAMP AND STOP WITH STEP TAPPED END CLAMP WITH ADJUSTABLE SUPPORT For mould clamping on plastic injection moulding & pressure die casting machines. Supplied only with threaded support. TTUC- TTUC- TTUC- TTUC- BOLT M- M- M- M- 5 0 0 FORGED STRAP CLAMP WITH TAPPED END Forged, Hardened & Tempered Most suitable for mould clamping on Plastic Injection Moulding Machine. TTFC - M- TAPPED END M - Also available as Model TTFC-S with threaded support TS- (M-X70 Long). This is a new version of low height pinch clamp (PC Series) having step to support the workpiece above the machine table for through milling and drilling. MODE PCS-1A PCS-1B PCS- PCS-3 MINI PINCH CLAMP Low Height Pinch Clamp With Step Stop For Above Pinch Clamp With Step For side clamping of thin plates on VMC, milling, shaping & planning. MPC-1 MPC- MPC-3 4
CLAMPS AND ELEMENTS LEVELLING JACKS & BLOCKS STRAP CLAMP Hardened & tempered, Black Finish based on IS:4 LEVELLING JACK LJ-1(a) LJ-1(b) LJ- LJ-3 BLOCK FOR LEVELLING JACK LEVELLING JACK - HEAVY DUTY ADJUSTABLE SUPPORT PLATES For clamp support. TASP- TASP- TASP-0 TASP-L- TASP-L- TASP-L-0 0 0 CLAMP REST AREA X X X PLATE ED SUPPORT FOR TAPPED END CLAMPS These have large resting base and hexagon at bottom for height adjustment. TS- TS- TS- TS- EFFECTIVE INCREASE WITH ONE BLOCK HBLJ- DIA AT BOTTOM LJ-HD 0 FLAT Ø HIGHT BLOCK FOR LEVELLING JACK - HEAVY DUTY HBLJ-HD- M- x 1. P M- x.0 P M- x.5 P M- x 3.0 P OVERALL 70 85 3Ø EFFECTIVE INCREASE WITH ONE BLOCK LEVELLING JACK - HEAVY DUTY FLANGE MOUNTING LJ-HD-FB 0 FLAT Ø STEP BLOCKS STEP BLOCK TSB-1L TSB-L TSB-3L TSB-1 TSB- TSB-3 WIDTH MINIMUM STEP BLOCK - HEAVY DUTY THSB-5 THSB-6 0 105 For clamp support. WIDTH 0 170 5 ADJUSTMENT 5 5 ADJUSTMENT MINIMUM 7 FLAT Ø FLAT Ø CONICAL V JACK - HEAVY DUTY SJ-HD-1 SJ-HD- 0 0 6 FLAT Ø FLAT Ø 0 M- M- M- M- 3Ø Ø Ø 8.0 8.0 5 5 TSC-8- TSC-10- TSC-- M- TSC--5 M- 5 TSC--5 M- 5 TSC--5 M- 5 TSC--0 M- 0 TSC--0 M- 0 TSC--0 M- 0 TSC--0 M- 0 TSC-- M- TSC-- M- STRAP CLAMP - FORGED BODY Hardened & tempered, tapped end. TSCF- TSCF- TSCF- TSCF- M- M- M- M- PLAIN CLAMP TES- TES- 0 0 0 GOOSE NECK CLAMP- FORGED - TAPPED END BOLT TGNCF- TGNCF- TGNCF- M- M- Hardened & Tempered These are economy models of strap clamps. Can be used where simple shape of a plain strap can serve the purpose. M- M- M- 70 0 5 5 0 U - CLAMP Hardened & Tempered, black nish BOLT TUC--0 TUC--0 TUC-- TUC-- M- M- M- M- FINGER STRAP CLAMP BOLT TCF - M- CAM CLAMP Hold Down Type 0 0 Hardened & Tempered based on IS:43 Most ideal for quick Hold Down Clamping in fixtures. Conventional Strap Clamps in fixtures can be replaced by these quick acting Cam clamps without much effort. These clamps have high clamping force suitable for machining fixtures. TCC-10 TCC- BOLT BOLT HOLDING CAPACITY M- 00 Kgs. 00 Kgs. D / 3D CAD files available on request STEPPED STRAP CLAMP Hardened & Tempered, Black Finish To be used with step block. BOLT TSSC-1 TSSC-10- TSSC-10-0 0 TSSC--65 TSSC-- TSSC--5 TSSC-- TSSC--5 TSSC--0 TSSC--0 TSSC--0 M- M- M- M- M- M- M- M- 65 5 5 0 0 0 5
CLAMPS AND ELEMENTS T- NUT Hardened & Tempered, Black Finish based on IS: TTN-10-8 TTN--10* TTN--10 TTN--* TTN-- TTN--* TTN-- TTN--* TTN-- TTN-- TTN--* TTN-- TTN-- TTN-- TTN-- STUD Hardend & Tempered, High Tensile Steel, Black Finish For use with T-nuts. TCS-8- TCS-8- TCS-8-0 TCS-1 TCS-10- TCS-10-5 TCS-10-0 TCS-10-1 TCS-10-0 TCS-- TCS-- TCS--5 TCS--0 TCS--1 TCS--0 TCS-- TCS--0 TCS-- TCS--0 TCS--0 TCS-- TCS-- TCS-- TCS--5 TCS--0 TCS--1 TCS--0 TCS-- TCS--0 TCS-- TCS--0 TCS--0 TCS-- TCS--0 TCS--0 TCS--0 TCS--0 TCS--0 TCS-- TCS--0 TCS--0 TCS--0 TCS--0 TCS--0 TCS-- TCS--0 TCS- TCS- M- M- M- M- M- M- M- M- M- M- M- M- M- M- M- M- M- M- 0 5 0 1 0 5 0 1 0 0 0 0 5 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 10 X X 63 X X X 63 X X X X 5 X X 63 X X X X 5 X 0 X 10 17 X 63 17 X 17 X 5 17 X 0 1 X 1 X 63 1 X 1 X 1 X 1 X 5 1 X 0 1 X 10 7 X 7 X 7 X 5 7 X 0 7 X 10 7 X 7 X X X 0 X 0 X 10 X X 43 X 43 X 0 43 X 0 43 X 10 43 X 43 X S * marked models are not recommended for heavy duty use because of less wall thickness outside the threading. 5 5 3 54 54 S STUD Hardend & Tempered, High Tensile Steel, Black Finish With hex key hole at top face for use on machine beds having tapped holes. TCSB-- TCSB--5 TCSB--0 TCSB--1 TCSB--5 TCSB--0 TCSB--1 TCSB--0 TCSB--0 TCSB--1 TCSB--0 TCSB--0 TCSB--1 TCSB--0 TCSB--0 TCSB--1 TCSB--0 TCSB--1 TCSB--0 TCSB--5 T-BOLT Forged Head, Hardened & Tempered, High Tensile Steel, Black Finish TTB-- TTB-- TTB--0 TTB-- TTB-- TTB-- TTB--5 TTB--0 TTB--0 TTB-- TTB--1 TTB--0 TTB-- TTB-- TTB--1 TTB--0 TTB--0 TTB-- TTB--0 TTB-- TTB--0 TTB--10 TTB-- TTB--0 TTB--10 TTB--5 TTB--0 TTB--10 TTB-- TTB--0 TTB--10 TTB-- TTB--0 TTB--0 TTB-- TTB--0 M- M- M- M- M- M- FOR E 5 3 54 5 0 1 5 0 1 0 0 1 0 0 1 0 0 1 0 1 0 5 M M M M M M M M M X X X 65 X X X 65 X X X 65 X X X X 70 X X X 70 X X 70 X X 0 L 0 5 0 0 1 0 1 0 0 0 0 10 0 10 5 0 10 0 10 0 0 0 FLANGED NUT Forged, Hardened & Tempered, Black Finish These nuts have flanged face for larger face contact with the surface to be tightened on TFN-10 TFN- M- TFN- M- TFN- M- TFN- M- E L
CLAMPS AND ELEMENTS EXTRA LONG NUT Hardened & Tempered, Black Finish KIT - 58 PIECE with step blocks & stepped strap clamps These nuts have longer life as they have more number of threads than ordinary nuts. TELN-8 TELN-10 TELN- M- TELN- M- 1 TELN- M- TELN- M- 7 TELN- M- TELN- M- 3 TELN- M- TELN- M- 45 Also Included T-Slot Cleaner FFFREE EXTENSION NUT Hardened & Tempered, Black Finish These nuts are used to couple the studs with studs or T- bolts in order to increase their length. TEN-8 TEN-10 TEN- TEN- TEN- TEN- TEN- TEN- PLAIN WASHER Case Hardened, Black Finish based on IS : 41 C-WASHER Case Hardened, Ground Faces, Black Finish Knurled outside diameter for easy gripping while quick insertion or removal. TCW-10 TCW- TCW- TCW- TCW- TCW- TCW- BOLT M- M- M- M- M- M- M- M- M- M- M- M- 4 7 0 OUTSIDE DIA 63 63 OUTSIDE DIA TPW-8 4 3 TPW-10 4 TPW- M- 5 TPW- M- 6 TPW- M- 7 45 TPW- M- 7 TPW- M- 7 TPW- M- 8 TPW- M- TPW- M- 70 based on IS : 41 N.W. Kgs. TCK-58-10 TCK-58-10 TCK-58-L TCK-58- TCK-58-L TCK-58- TCK-58- TCK-58- TCK-58- TCK-58- M- M- M- M- M- M- M- M- 1 Consists of : T-Nuts : 6 Nos. Clamping Studs of six different lengths : 4 Nos. each Flanged Nuts : 6 Nos. Extension Nuts : 4 Nos. Stepped Strap Clamps of three different lengths : Nos. each Step blocks of three different sizes : pairs (4 Nos.) each CMM KIT - 6 PIECE with Aluminum / plastic clamping elements KIT - 34 PIECE with adjustable support plates & strap clamps Also Included T-Slot Cleaner FFFREE TCK-34- TCK-34- TCK-34- Consists of : T-Nuts Clamping Studs of four different lengths Flanged Nuts Extension Nuts Strap Clamps of two different lengths Adjustable Support Plates of two different sizes : 4 nos. : 4 nos. each : 4 nos. : nos. : nos. each : nos. each M- M- M- Specially designed for 3D coordinate measuring machine and other inspection and gaging applications. Model CMMCK-6 consists of : nos. Aluminum studs of different lengths upto 0mm long. 8 nos. Aluminum flanged nuts (Hand Tightening Type). 6 nos. Aluminum alloy strap clamps. 8 nos. Aluminum screw jacks. 4 nos. Aluminum top rest pads for screw jacks. 8 nos. Plastic bottom rest pads for screw jacks and studs. Adaptor available on request for CMM s with or M- threaded beds. A T-Slot size mentioned in these pages is size A of the T-Slot as shown here. Visit www.toolfastclamps.com for online details of above products or write to us for a print copy 7
WEDGE CLAMPS WEDGE CLAMP - RIGID BODY, HARDENED TOOL STEEL, DOWNWARD FORCE TOOLFAST manufactures all models of wedge clamps with new patented design now in India. Patented design with bottom spring ensures downward Clamping force Hidden spring eliminates clogging of chips in spring coil WEDGE CLAMP - TWC SERIES Serrated Hardened Jaws WEDGE CLAMP - TWC-P SERIES Plain Hardened Jaws with Tapped Holes TWC-8 TWC- TWC- M M These have plain hardened jaws with added two tapped holes for attaching additional jaw inserts if need be. TWC-8 P TWC- P TWC- P M M WEDGE CLAMP - TWC-M SERIES Machinable Jaws These have extra material on jaws (soft) to machine as per the workpiece shape enabling fixturing of uneven or unusual shape work pieces. TWC-8 M TWC- M TWC- M M M MULTIPLE WORKPIECE FIXTURES WITH TWC SERIES WEDGE CLAMPS DESIGNED & MANUFACTURED BY TOOLFAST MULTIPLE VICE WITH TWC- WEDGE CLAMPS TOOLFAST offers a mm jaw width vice which is capable of clamping multiple workpieces. All parts such as TWC wedge clamp, fixed jaws and the main body are modular and interchangeable. Wedge Clamp TWC- Workpieces 4 Nos. Mounting Clamps included Adjustable Position Fixed Jaw Model VTWC-- available as standard having overall length 3mm capable of jaw opening 1mm in case of two workpieces. Above vice can be supplied in custom built lengths to suit different sizes of workpieces. Send your enquiries to us if you feel that mm jaw width vice can hold your workpiece. Additional fixed jaws and TWC series clamps can be included in the vice if more than two workpieces to be clamped. For uneven or unusual shape workpieces, TWC-M and TWC-P series wedge clamps can also be used in above vice. Wedge Clamp Fixture Base Plate Workpieces Unusual Shape Workpiece Machinable Wedge Clamp If your workpiece is suitable for clamping with 'TOOLFAST' Wedge clamps, our team can design and manufacture a multiple clamping fixture for you as the one shown in the picture. Please send in your enquiries with workpiece / machine table specifications to us if you feel that 'TOOLFAST' wedge clamps are suitable for your workpiece or simply send your workpiece/ machine details to us and let us decide it. D / 3D CAD les available on request 8