HOLDY ROW Level: dvanced Beginner Size: 38" W x 44" H Quilt designed by Heidi Pridemore
BR RQURMNTS X7387-Multi 1 s (Border) S5333-Dirt S5333-herry (Border, pplique & Binding) S5333-Bright White 1 yard (pplique) X7398-qua (ornerstones & pplique) X7398-Red X7388-Multi X7399-qua S5333-Lime (pplique) S5333-Spearmint (pplique) S5333-reen S5333-Pink X7399-qua 2 ¾ yards (Backing) SU # of bolts for 12 its # of bolts for 24 its () X7387-Multi 1 bolt (15 yards) 2 bolt (30 yards) (B) S5333-Dirt 1 bolt (1 ½ yards) 1 bolt (3 yards) () S5333-herry 1 bolt (8 yards) 2 bolts (16 yards) (D) S5333-Bright White 1 bolt (12 yards) 2 bolts (24 yards () X7398-qua 1 bolt (3 yards) 1 bolt (6 yards) () X7398-Red 1 bolt (1 ½ yards) 1 bolt (3 yards) () X7388-Multi 1 bolt (1 ½ yards) 1 bolt (3 yards) (H) X7399-qua 1 bolt (1 ½ yards) 1 bolt (3 yards) () S5333-Lime 1 bolt (3 yards) 1 bolt (6 yards) () S5333-Spearmint 1 bolt (3 yards) 1 bolt (6 yards) () S5333-reen 1 bolt (3 yards) 1 bolt (6 yards) (L) S5333-Pink 1 bolt (1 ½ yards) 1 bolt (3 yards) (Back) X7399-qua 3 bolts (33 yards) 5 bolts (66 yards) TOTL BOLTS NDD 15 Bolts (12 w/o Back) 20 Bolts (15 w/o Back) p.212.704.0774 info@michaelmillerfabrics.com www.michaelmillerfabrics.com
Materials "Holiday Row" Quilt by Heidi Pridemore Size: pproximately 38" x 44" Skill Level: dvanced Beginner utting instructions Please Note: ll strips are cut across the width of fabric (WO) from selvage to selvage edge unless otherwise noted. abric Yardage utting () X7387-Multi Holiday Row Multi 1 s ussy cut two 3 ½ x 32 ½ Length of abric (LO) strips, each centered on the pink stripe. ussy cut two 3 ½ x 38 ½ LO strips, each centered on the pink stripe. (B) S5333-Dirt otton outure Dirt See instructions to cut one tree trunk. () S5333-herry otton outure herry ut two 1 ½ x 36 ½ WO strips. ut two 1 ½ x 32 ½ WO strips. See instructions to cut six 2 circles. (D) S5333-Bright White otton outure Bright White 1 yard ut one 30 ½ x 36 ½ strip. () X7398-qua Holiday Ho! qua ut one 3 ½ x WO strip. Sub-cut the strip into four 3 ½ squares. See instructions to cut six 3 circles. () X7398-Red Holiday Ho! Red See instructions to cut seven 3 circles. () X7388-Multi Tinsel Tiles Multi (H) X7399-qua Oh Ho No qua See instructions to cut four 3 circles. () S5333-Lime otton outure Lime See instructions to cut two Scroll 1 components. See instructions to cut one Scroll 2 component. See instructions to cut nine 2 circles. () S5333-Spearmint otton outure Spearmint See instructions to cut one Scroll 1 component. See instructions to cut one Scroll 2 component. See instructions to cut seven 2 circles. () S5333-reen otton outure reen See instructions to cut one Scroll 1 component. See instructions to cut two Scroll 2 components. (L) S5333-Pink otton outure Pink Backing X7399-qua 2 ¾ yards ut two 46 x WO strips. Piece the strips together and trim Oh Ho No qua to make the 46 x 52 pieced backing. You will also need: 46 x 52 batting, fusible web, threads to match, scissors, straight pins, acrylic ruler, rotary cutter and mat. 3
Disclaimers This pattern is provided as a courtesy to quilt stores, catalogs and quilters. Michael Miller abrics, LL is not responsible for the accuracy of any kits packaged to accompany this pattern. Please direct any inquiries to the kit maker. While every attempt has been made to give accurate measurements, yardage requirements and construction directions; this does not allow personal variations in measuring, cutting or sewing. The enclosed directions were used in the construction of the original quilt. Block ssembly 1. ollowing the manufacturer s instructions, trace the listed number of each template onto the paper side of the fusible web. Roughly cut out each template about 1/8 outside the drawn lines. D 2. Press each template onto the wrong side of the fabrics as listed on the templates. ut out each template on the drawn lines. 3. Refer to the igure 1 to arrange and press the twenty-two 3 circles, thirty-two 2 circles, four Scroll 1 components, four Scroll 2 components and one tree trunk onto the 30 ½ x 36 ½ abric D strip. H L L L H H L H L B ig. 1 4. inish the raw edges of each shape with a decorative stitch such as a buttonhole or satin stitch to make the enter Block. 4
Quilt Top ssembly (ollow the Quilt Layout while assembling the quilt top.) 5. Sew one 1 ½ x 36 ½ abric strip to each side of the enter Block. Sew one 1 ½ x 32 ½ abric strip to the top and to the bottom of the enter Block. 6. Sew one 3 ½ x 38 ½ abric strip to each side of the enter Block. Sew one 3 ½ abric square to each end of one 3 ½ x 32 ½ abric strip. Repeat to make a second strip. Sew the strips to the top and to the bottom of the enter Block to make the quilt top. 7. Layer and quilt as desired. the binding. old this long strip in half lengthwise with wrong sides together and press 9. Bind as desired. Quilt Layout 5
1 square for scale Trunk Trace 1 abric B 6
Templates Reversed for usible pplique Small Ornament Trace 32 (6) abric (9) abric (7) abric (5) abric (5) abric L 1 square for scale Scroll 2 Trace 4 (1) abric (1) abric (2) abric Large Ornament Trace 22 (6) abric (7) abric (5) abric (4) abric H Scroll 1 Trace 4 (2) abric (1) abric (1) abric 2017 Michael Miller abrics LL 7