High Current Density Surface Mount Dual Common-Cathode Schottky Rectifier esmp Series 2 TO-277A (SMPC) Anode Cathode Anode 2 FEATURES Very low profile - typical height of. mm Ideal for automated placement Low forward voltage drop, low power losses High efficiency Low thermal resistance Meets MSL level, per J-STD-020, LF maximum peak of 260 C AEC-Q0 qualified Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC Halogen-free according to IEC 6249-2-2 definition PRIMARY CHARACTERISTICS I F(AV) 2 x 4.0 A V RRM 50 V, 60 V I FSM 20 A E AS 20 mj V F at I F = 4 A 0.56 V T J max. 50 C MECHANICAL DATA Case: TO-277A (SMPC) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS compliant, and automotive grade Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B02 M3 suffix meets JESD 20 class A whisker test, HM3 suffix meets JESD 20 class 2 whisker test TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, freewheeling diodes, DC/DC converters and polarity protection application. MAXIMUM RATINGS ( unless otherwise noted) PARAMETER SYMBOL SS8P5C SS8P6C UNIT Device marking code S85C S86C Maximum repetitive peak reverse voltage V RRM 50 60 V Maximum average forward rectified current (fig. ) total device 8.0 A I F(AV) per diode 4.0 Peak forward surge current 0 ms single half sine-wave superimposed on rated load I FSM 20 A Non-repetitive avalanche energy at 25 C, I AS = 2 A per diode E AS 20 mj Operating junction and storage temperature range T J, T STG - 55 to + 50 C Document Number: 89028 For technical questions within your region, please contact one of the following: www.vishay.com Revision: 7-May- DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
ELECTRICAL CHARACTERISTICS ( unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL TYP. MAX. UNIT I F = 2.0 A 0.55 - Instantaneous forward voltage I F = 4.0 A 0.65 0.70 V per diode F I F = 2.0 A 0.48 - V I F = 4.0 A 0.56 0.60 Reverse current per diode Rated V R I (2) R 2.5 50 μa.6 0 ma Typical junction capacitance per diode 4.0 V, MHz C J 60 - pf Notes () Pulse test: 300 μs pulse width, % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS ( unless otherwise specified) PARAMETER SYMBOL SS8P5C SS8P6C UNIT Typical thermal resistance per diode Note () Units mounted on recommended PCB oz. pad layout R JA () 60 R JL 3 C/W ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PACAGE CODE BASE QUANTITY DELIVERY MODE SS8P6C-M3/86A 0.0 86A 500 7" diameter plastic tape and reel SS8P6C-M3/87A 0.0 87A 6500 3" diameter plastic tape and reel SS8P6CHM3/86A () 0.0 86A 500 7" diameter plastic tape and reel SS8P6CHM3/87A () 0.0 87A 6500 3" diameter plastic tape and reel Note () Automotive grade www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 89028 2 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 7-May- THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
Average Forward Rectified Current (A) Transient Thermal Impedance ( C/W) Junction Capacitance (pf) RATINGS AND CHARACTERISTICS CURVES (T A = 25 C unless otherwise noted) 0 8 6 4 2 T L measured at the Cathode Band Terminal Resistive or Inductive Load 0 0 25 50 75 00 25 50 75 Lead Temperature ( C) Fig. - Maximum Forward Current Derating Curve Instantaneous Reverse Current (µa) 0 000 T A = 50 C 000 00 0 0. 0 20 30 40 50 60 70 80 90 00 Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Leakage Characteristics Per Diode Average Power Loss (W) 3.0 2.5 2.0.5.0 0.5 D = 0.3 D = 0.5 D = 0.8 D = 0.2 D = 0. D =.0 T D = t p /T t p 000 00 T J = 25 C f =.0 MHz V sig = 50 mvp-p 0 0 0.5.0.5 2.0 2.5 3.0 3.5 4.0 4.5 Average Forward Current (A) Fig. 2 - Forward Power Loss Characteristics Per Diode 0 0. 0 00 Reverse Voltage (V) Fig. 5 - Typical Junction Capacitance Per Diode 00 00 Instantaneous Forward Current (A) 0 0. T A = 50 C 0 Junction to Ambient 0.0 0 0.2 0.4 0.6 0.8.0.2 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode 0.0 0. 0 00 t - Pulse Duration (s) Fig. 6 - Typical Transient Thermal Impedance Per Diode Document Number: 89028 For technical questions within your region, please contact one of the following: www.vishay.com Revision: 7-May- DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
PACAGE OUTLINE DIMENSIONS in inches (millimeters) TO-277A (SMPC) 0.87 (4.75) 0.75 (4.45) 0.06 (0.40) 0.006 (0.5) 0.262 (6.65) 0.250 (6.35) 0.242 (6.5) 0.238 (6.05) 2 0.7 (4.35) 0.67 (4.25) 0.047 (.20) 0.039 (.00) 0.46 (3.70) 0.34 (3.40) 0.087 (2.20) 0.075 (.90) Mounting Pad Layout 0.89 (4.80) 0.89 (4.80) 0.73 (4.40) 0.55 (3.94) NOM. 0.268 (6.80) 0.86 (4.72) 0.030 (0.75) NOM. 0.049 (.24) 0.037 (0.94) 0.084 (2.3) NOM. 0.053 (.35) 0.04 (.05) Conform to JEDEC TO-277A 0.04 (.04) 0.050 (.27) 0.055 (.40) www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 89028 4 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 7-May- THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
www.vishay.com Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 20/65/EU of The European Parliament and of the Council of June 8, 20 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 20/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 6249-2-2 definition. We confirm that all the products identified as being compliant to IEC 6249-2-2 conform to JEDEC JS709A standards. Revision: 02-Oct-2 Document Number: 9000