Application matrix 4 2 Pae Foldin table fittin 3 Self-supportin 2 Foldin extension leaf Synchronous Additional Accessories With support le Pull out Front extension Type of leaf Tables with frame 2.8 2.9 2.24 2.25 Tables without frame 2.25 2.26 2.27 2.28 2.29 Pull out systems for installation in cabinets 2.30 Table extension fittins 2.32 2.33 2.34 2.35 Table with or without frame Tables with and without frames are constructed and function in different ways. Table with frame = one-piece table base The separable table tops are pushed apart. The table base remains unchaned. Table without frame = multi-piece table base The separable table bases with ixed table top are pushed apart. 2 Followin applies for both tables with frame and without frame: Extension leaf Minimum width 400 Standard 500 Comfort 600 One extension leaf provides additional seatin for 2 people. Synchronous Only one table side must be pulled out. The opposite side of the table is then extended automatically. Both table sides must be pulled out separately. Without lockin mechanism For lockin the pull out table ittin in extended position additional ittins are required (table top swivel bolts, lockin hooks or sprin clips). With lockin mechanism The lockin mechanism is interated in the pull out table ittin. No further ittins are required. 2.6 Even easier product search. www.hafele.com DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter speciications without notice. 2.3
Information Pull out table ittins for tables with frame Construction One-piece table base Separate table tops and with table top connectin ittins and sleeves Extension leaves can be itted to the table frame with a foldin ittin. Notes on construction Pull out tables with closed frames can also be equipped with an extension leaf with a hined middle section (foldin ittin). The foldin ittin is required in addition to the pull out table ittin and must be ordered separately. Note on choice of pull out table ittin lenth L of pull out table ittin = approx. lenth of frame/base or approx. 2/3 of table Ø or table lenth without A L B E = width of extension leaf = installation lenth of pull out table ittin = total extension lenth of pull out table ittin = openin for extension leaf Please note: If the installation lenth L is less than approx. lenth of frame/base or table Ø, this may lead to malfunction or sain of the table top. Open table frame Closed table frame Separate extension leaf on end side DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter speciications without notice. Separate extension leaf Separate extension leaf (separate storae) Foldin fittin Separate extension leaf (interated in table) Foldin ittin (interated in table) Note: Foldin fittin must be ordered separately in addition to the pull out table fittin. Front extension Front extension Open table frame Foldin ittin (interated in table) Foldin ittin (interated in table, "drawer function") Pull out table ittins for tables without frame Construction Multi-piece table base, each ixed to one half of the table top. Surroundin panel beneath table top stabilises the pull out table. Notes on construction If the table les are mounted inwards (with balance point on table top half) the pull out table ittin can be used without a central rod. If table les are mounted outwards, always select pull out table ittin with central rod. Central rod Note on choice of pull out table ittin lenth L of pull out table ittin = approx. lenth of frame/base or approx. 2/3 of table Ø or table lenth without View of table from below, A = width of extension leaf without extension leaf L = installation lenth of pull out table ittin B = total extension lenth of pull out table ittin E = openin for extension leaf A lenth of pull out table ittin is approx. lenth of frame Please note: If the installation lenth L is less than approx. lenth of frame/base or 2/3 of table Ø, this may lead to malfunction or sain of the table top. Types of tables without frame Open table frame Front extension Separate extension leaf (separate storae) Open table frame Separate extension leaf (separate storae) Easier naviation. Intuitive indin. www.hafele.com 2.7 Types of tables with frame 2
For tables with frame Ball bearin runners For tables with frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. Galvanized For screw fixin For extension leaf Synchronous, asynchronous or synchronous with continuous, lateral lockin mechanism For 2 Synchronous with continuous, lateral lockin mechanism For 2 4 people more at the table For 2 people more at the table Area of application: Also suitable for lass tables 2 Load bearin capacity 60 k lenth Load bearin capacity Openin for extension leaf Width of extension leaf Total extension lenth Mountin bracket lenth Recoended table lenth Load bearin capacity k 850 k 60,200 60 640 640 8 840 x 600 x 600 2 x 400 2 x 400,250,40,830,780 2 320 0,200 338 370,250,800 Note on choice of pull out table fittin lenth of pull out table fittin = approx. lenth of frame/ base or approx. 2/3 of table diameter or table lenth without lenth 850 200 Load bearin Version capacity k 60 Synchronous Synchronous With lateral lockin mechanism 60 Synchronous 642.59.2 642.56.802 642.59.922 642.57.008 642.59.3 642.57.009 Packin: set The set does not include 8 table top connectin fittins and 4 lockin hooks or 4 swivel lus. Please order separately. 2.8 Load bearin capacity Openin for Width of Total extension lenth Mountin bracket lenth Recoended table lenth k 840 2 x 400,750 370,250,800 Note on choice of pull out table fittin lenth of pull out table fittin = approx. lenth of frame/ base or approx. 2/3 of table diameter or table lenth without lenth 200 Load bearin capacity k 642.57.2 Packin: set The set does not include 2 table top connectin fittins and 2 lockin hooks or 2 swivel lus. Please order separately. Table top connectin fittins 2.2 Lookin hook 2.2 Swivel lu 2.2 Foldin fittin 2.20 Loical and easy. Intellient filters for findin the riht product. www.hafele.com DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice.
For tables with frame Roller runners For tables with frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. For 2 people more at the table Aluminium Briht For screw fixin For extension leaf For extension leaf Synchronous with pull cable DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. Load bearin capacity Openin for extension leaf Width of extension leaf Total extension lenth Mountin bracket lenth lenth 800 Packin: set k 60 530 500,034 250 642.68. Load bearin capacity lenth Openin for extension leaf Width of extension leaf Mountin bracket lenth k 60 800 550 x 500 250 lenth 800 000 60,000 700 x 600 300 642.68.92 642.68.922 Packin: set 2 h Foldin fittin At a lance. All of the data for your plannin. www.hafele.com 2.20 2.9
For tables with frame Foldin fittin For tables with frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. For extension leaf Area of application: For foldin and lowerin an extension leaf up to max. 500 Functionality: Semi-automatic lowerin, smooth operation Note These items are only suitable for extendin table runners for tables with frame. 2 h For extension leaf, for closed table frame A Leaf handle B Table top connectin fittin I Pivot bearin J Supportin bracket K Foldin table hine L Foldin table hine Packin: set 2.20 K Foldin table hine L Foldin table hine Supplied with Each of riht and left drive Each of riht and left slidin support Inclined piece, runner Leaf handle, 4 lockin hooks Set of installation instructions Supplied with Leaf handle A 8 Table top connectin fittins B 2 Sprin clips Pair of pivot bearins I 2 Supportin brackets J 2 Foldin table hines K Set of installation instructions For table top thickness 9 22 A Leaf handle B Table top connectin fittin C Lockin hook 52 642.47.500 642.47.50 For table top thickness 6 32 642.47.520 Packin: set The scope of delivery does not include 8 table top connectin fittins and 2 foldin table hines. Please order separately. Table top connectin fittins 2.2 Foldin table hines 2.23 Pull out table fittins for tables with frame 2.8 More reliable on the job. More clarity. Iediate delivery info. www.hafele.com DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. For extension leaf, for open table frame
For tables with frame Foldin fittin individual components For tables with frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. Leaf handle A Nickel plated For screw fixin to extension leaf 642.5.300 Leaf handle A 642.5.230 Lockin hook D Swivel lu E Table top connectin fittin B DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. Zinc alloy Nickel plated For screw fixin beneath table top Packin: or 00 pieces Packin: or 50 pieces Galvanized For mountin in drilled hole or screw fixin beneath table top Material thickness:.5 Yellow chromatized For press fittin into Ø 8 drill holes Table top connectin fittin B 642.5.243 Packin: 20, 00 or 000 pieces 642.48.92 Swivel lu E Packin: or 00 pieces Lockin hook 52 C Swivel lu F Lockin hook 53 D 2 Yellow chromatized For screw fixin beneath table top Lockin hook C Packin: or 00 pieces 642.5.225 Brass plated For mountin in drilled hole or screw fixin beneath table top Swivel lu F 642.48.530 Packin: or 00 pieces Start iediately. With familiar functions. www.hafele.com 2.2
For tables with frame For tables with frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. Sprin clip G Pivot bearin I Galvanized For screw fixin beneath table top 380.52.925 Sprin clip G Packin: or 00 pieces Yellow chromatized For screw fixin beneath extension leaf 642.48.504 Pivot bearin I Packin: or 50 pairs Yellow chromatized For screw fixin beneath table top Sprin clip with lockin mechanism H Packin: or 00 pieces Supportin bracket J 380.5.503 Yellow chromatized For screw fixin beneath table frame Supportin bracket J 642.48.53 Packin: or 200 pieces 2 2.22 Quick and easy. Research, obtain information and order. www.hafele.com DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. Sprin clip with lockin mechanism H
For tables with frame For tables with frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. Foldin table hine K Foldin table hine L For panel thickness 8 20 For panel thickness 22 27! 2 ; 23 (from panel thickness 28 ) Foldin table hine Half spacer plate Material: Finish: For wood thickness: : Supplied with: Zinc alloy Yellow chromatized 8 27 For recess mountin With half spacer plates, quantity in accordance with table below DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. The provided 2 plates must be placed beneath 6 leaves. For Recess LxW table top depth ET thickness Heiht H A Material thickness Md 6 4 85 x 47 46 25 8 6 85 x 47 46 25.5 2 9 85 x 5 5 28.5 25 23 85 x 43 59 2.5 28 25 33 x 50 63 26 30 27 33 x 46 67 23 32 29 33 x 4 7 8.5 Half spacer plates Recess depth Heiht H.7 For table top thickness.7 8 4 5 48.7 9 2 6 48 20 7 48 22 4 9 56 23 2 20 56 24 2 56 25 4 22 62 26 2 23 62 27 24 62 Functionality For table top thickness 6 8 2 25 28 30 32 34.30.535 34.30.508 34.30.526 34.30.544 34.30.550 34.30.560 34.30.570 For table top thickness 8 9 20 22 23 24 25 26 27 Packin pieces or 50 or 50 or 50 Yellow chromatized For table top thickness: With internal joint 6 25, with external joint 28 32 For recess installation 34.3.58 34.3.59 34.3.520 34.3.522 34.3.523 34.3.524 34.3.525 34.3.526 34.3.527 Packin: or 00 pieces Enjoyable work. Attractive desin. www.hafele.com 2.23 2
For tables with frame Roller runners For tables with frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. With synchro drive for fixed table foot, for foldin extension leaf Flat pull out profile allows for an attractive desin Pull out profile aluminium, silver coloured anodized Set complete with pull out frame (after connectin the foldin fittin) For 4 6 people more at the table Foot position can be selected individually Area of application: For pull out tables with central table foot or with side panels/le frame bases Aluminium Silver coloured anodized For screw fixin to table top Load bearin capacity k Total extension lenth,800 For table top size 2,000 x 950 Foldin extension leaf,000 x 950 (2 x,000 x 474.5) Note Foot position optional at intervals of 80, fixin with M6 thread in construction frame Supplied with Set of table leaf extension runners with pull out frame Set of foldin fittins Set of installation instructions lenth 800 642.29.940 Packin: set 2 Table top dimensions 2.24 Table base fixin options Advise more efficiently. Product comparisons in tabular form. www.hafele.com DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. Functionality
For tables with and without frame Ball bearin runners For tables with and without frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. For 3 For 4 Synchronous with continuous cord retainer Synchronous with continuous cord retainer Support foot provided on site Type A Type B lenth 850 : For 2 4 people more at the table lenth,200 : For 2 6 people more at the table For 2 8 people more at the table Galvanized For screw fixin beneath table top Aluminium Silver coloured anodized For screw fixin beneath table top! Supportin bracket " Table without frame: Cross bar for Table with frame: Base and support for! Support for Table with frame Wooden table top! Openin for " lenth Total extension lenth Table without frame lenth Load bearin capacity Openin for extension leaf Width of extension leaf Total extension lenth Mountin bracket lenth Recoended table lenth lenth 850 200 k 850,050 2 x 500,0 725 0,250,200,5 3 x 500 2,7 725,250,800 642.59.92 642.59.95 lenth Load bearin capacity of table with frame Load bearin capacity of table without frame, type A Load bearin capacity of table without frame, type B Openin for Width of Total extension lenth Mountin bracket lenth Recoended table lenth k,200 50,600 50 k 20 50 k 50 20,760 4 x 400 2,960,25,250,800,850 3 x 600 3,450,600,650 2,400 lenth 200 600 642.2.897 642.2.898 Packin: set Packin: set Table top connectin fittins and sprin clips are not supplied. Please order separately. Other sizes available on request Scope of delivery does not include 20 table top connectin fittins and 2 sprin clips. Please order separately. Work productively. Access to all Häfele services. www.hafele.com DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. 2.25 2 f
For tables without frame Ball bearin runners Ball bearin runners For tables without frame / Plannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. For tables without frame + framesplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. For foldin extension leaf For 2 people more at the table One-sided front extension "drawer principle" Pull out profile aluminium, silver coloured anodized For 2 people more at the table Galvanized For screw fixin beneath table top For extension leaf Area of application: For extendin tables with front extension on one side Aluminium Silver coloured anodized For screw fixin to table top Functionality Load bearin capacity One foldin extension leaf Extension leaf frame Openin for extension leaf 640 Width of extension leaf x 600 Total extension lenth,60 Mountin bracket lenth 305 Recoended table lenth 570 800 Note on choice of pull out table fittin lenth of pull out table fittin = approx. lenth of frame/base or approx. 2/3 of table diameter or table lenth without lenth 520 642.69.205 Packin: set The set does not include 8 table top connectin fittins and 4 sprin clips or 4 swivel lus or 4 lockin hooks. Please order separately. 2 k Load bearin capacity k Openin for 630 Width of x 500 Total extension lenth 483 Note The table lenth must be at least,0 when usin front extensions for each front side. Supplied with Set of table leaf extension runners Set of foldin fittins Set of installation instructions lenth 830 642.29.930 Packin: set 2.26 Discover. New products for your requirements. www.hafele.com DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. Technical Data
For tables without frame Ball bearin runners For tables without frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. Galvanized For screw fixin beneath table top For 2 For 2 or 3, with central rod For 2 6 people more at the table For 2 4 people more at the table Version: Finish/colour: With central rod for improved stability Runners and cetral rod: Runners: Galvanized, central rod: Powder coated, white aluminium, RAL 06 lenth Load bearin capacity Openin for Width of extension leaves Total extension lenth Mountin bracket lenth Recoended table lenth 740 k,200,600,080,080,280 2 x 500 2 x 500 2 x 600,820,820 2,880 400 725 725 7,200,250,800,650 2,400 Note on choice of pull out table fittin lenth of pull out table fittin = approx. lenth of frame/ base or approx. 2/3 of table diameter or table lenth without lenth 740 200 600 642.69.207 642.69.208 642.69.209 Packin: set The set does not include 2 table top connectin fittins and 6 sprin clips or 6 swivel lus or 6 lockin hooks. Please order separately. lenth Load bearin capacity Openin for Width of extension leaves Total extension lenth Mountin bracket lenth Recoended table lenth 860 k,200,600,20,560,560 2 x 500 3 x 500 3 x 500,980 2,760 3,60 725 725 725,200,250,800,650 2,400 DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. Note on choice of pull out table fittin lenth of pull out table fittin = approx. lenth of frame/ base or approx. 2/3 of table diameter or table lenth without Note Installin a support foot on site is recoended with installation lenth,600. lenth 860 200 600 642.59.932 642.59.935 642.59.936 Table top connectin fittins 2.2 Lookin hook 2.2 Packin: set Swivel lu 2.2 Sprin clips 2.22 The set does not include 2 table top connectin fittins and sprin clips or 6 swivel lus or 4 lockin hooks. Please order separately. Product imaes, instructions and films riht next to the product. www.hafele.com 2.27 2
For tables without frame For 4 For 3 For tables without frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice., with hined telescopic support foot For 2 8 people more at the table For 2 6 people more at the table Finish/colour: Galvanized For screw fixin beneath table top Runners and support foot: Runners: Galvanized, support foot: Powder coated white aluminium, RAL 06 For screw fixin beneath table top 2 Load bearin capacity k Openin for,620 Width of 3 x 500 Total extension lenth 2,360 Mountin bracket lenth 605 Recoended table lenth 7,00 Note on choice of pull out table fittin lenth of pull out table fittin = approx. lenth of frame/ base or approx. 2/3 of table diameter or table lenth without lenth 740 lenth Load bearin capacity k Openin for The set does not include 6 table top connectin fittins and 8 sprin clips or 8 swivel lus or 8 lockin hooks. Please order separately. 2.28,200 2,00 2,560 Width of 4 x 500 5 x 500 Total extension lenth 2,720 3,760 Mountin bracket lenth 340 725 Recoended table lenth 670,000,250,800 Note on choice of pull out table fittin lenth of pull out table fittin = approx. lenth of frame/base or approx. 2/3 of table diameter or table lenth without lenth 620 200 642.69.506 642.56.508 Packin: set The set does not include 20 table top connectin fittins and 0 sprin clips or 0 swivel lus or 0 lockin hooks. Please order separately. Table top connectin fittins 620 642.69.307 Packin: set! Support foot 2.2 Lookin hook 2.2 Swivel lu 2.2 Sprin clips 2.22 Efficient operation. Effective in application. www.hafele.com DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice.
For tables without frame Ball bearin runners For tables without frame / Plannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. For or 2 foldin Pull out profile aluminium, silver coloured anodized For 2 4 people more at the table Functionality Two foldin DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. lenth 940,400 Load bearin capacity k 5 5 Openin for extension leaves,30,30,30 Width of extension leaves x,000 or 2 x 500 For table top lenth,040,500 5,500,0,800,0 2,400 Note Pull out frame for fixin the foldin fittins must be manufactured on site in accordance with the installation instructions. Supplied with Set of table leaf extension runners Set of foldin fittins 2 Inset castors instructions lenth 940 400 800 642.25.93 642.25.934 642.25.936 One foldin extension leaf Area of application: For extendin tables with frame, one-side extension Runners: Aluminium, foldin fittin: Runners: Silver coloured anodized, foldin fittin: Galvanized For screw fixin to table top and pull out frames Packin: set Please order foldin table hine for foldin extension leaf separately. Extension leaf frame with two foldin : Dimensions exemplary for foldin extension leaf 2 x 500, table width,000 Extension leaf frame with one foldin extension leaf: Dimensions exemplary for foldin extension leaf x,000, table width,000 Foldin table hine Simplified re-orderin. Comprehensive order archive. www.hafele.com 2.23 2.29 2