MONARCH SURPLUS EQUIPMENT FOR SALE Monarch Industries is expanding production capacity for hydraulic cylinders at its 51 Burmac Road facility. This World Class initiative includes a plant re-layout and the continuous improvement team has identified the following equipment, valued at approximately $1 Million, as being surplus to the continuing operations of this plant. For further information on this equipment, please feel free to contact John Sawatzky at the following: Phone: (204) 786-7921 ext. 830 Email: jsawatzky@monarchindustries.com Thank you for your interest in this project 1. 2010 Mazak Horizontal Machining Centre HCN 6800 Table Size: 24.8 X 24.8 50 Horsepower Tool Chain: 160 Pockets X Axis Travel: 41.34 Y Axis Travel: 35.34 Z axis Travel: 38.58 Power On Hours: 12,908 (Feb. 19, 2015) Auto Hours: 11,224 Cutting Hours: 6,057 Available: Aug. 1, 2015 $299,000 (US Funds) This machine has all the bells and whistles spindle probe, 1,000 psi through the spindle coolant, Niagara coolant system, FMS ready. too many options to list. Machine is in great condition and has been expertly maintained by trained millwrights using MP2 maintenance software. June 14, 2015 Page 1 of 5
2. 2007 Mazak Horizontal Machining Centre HCN 6800 Table Size: 24.8 X 24.8 50 Horsepower Tool Chain: 160 Pockets X Axis Travel: 41.34 Y Axis Travel: 35.34 Z axis Travel: 38.58 Power On Hours: 41,504 (Feb. 19, 2015) Auto Hours: 35,574 Cutting Hours: 18,983 Available: Aug. 1, 2015 $269,000 (US Funds) This machine is the slightly older twin of the first machine and has all the same bells and whistles spindle probe, 1,000 psi through the spindle coolant, Niagara coolant system, FMS ready. too many options to list. Machine is in great condition and has been expertly maintained by trained millwrights using MP2 maintenance software. 3. 2010 Zoller Optical Tool Presetter Smile 400 Software: Windows XP/Pilot 3 Printers: Inkjet & Label $14,900 (US Funds) X axis: 8.3 Z axis: 15.7 Max Tool Dia. 16.5 RFID CHIP in retention knob. Read by tool presetter and machine. Automatically identifies tool. Never use the wrong tool or wrong offset again! Using Mazak s Cybertool database and the RFID chip has eliminated all tooling errors! June 14, 2015 Page 2 of 5
4. 1997 Okuma Horizontal Machining Centre MX-60HB Table Size: 24.8 X 24.8 inches 27 Horsepower Tool Chain: 100 Pockets X Axis Travel: 39.37 Y Axis Travel: 31.50 Z axis Travel: 31.89 Power On Hours: 77,263 Spindle Hours: 24,211 Cutting Hours: 19,428 Available: Immediately $59,000 (US Funds) Although this machine is older than the Mazak s, it still has the ability to remove material fast and make accurate parts. It too has a Renishaw spindle probe and 1,000 psi through the spindle coolant. The great feature with this machine is that it has only three leveling screws all the rigidity is built into the massive cast iron frame. This makes the machine easy to move and install. 5. 1996 Okuma CNC lathe LB35 Chuck Size: 15 Hole Through Spindle: 4.33 Hole Through Draw Tube: 3.50 Max Turning Dia: 17.72 X Axis Travel: 12.99 Z Axis Travel: 36.22 40 Horsepower Price (US Funds): $50,000 This is a great lathe that will still turn parts within tenths of a thou. Monarch owned this lathe from new and has all the original documentation. June 14, 2015 Page 3 of 5
6. 1996 Okuma CNC lathe L1420 Chuck Size: 15 Hole Through Spindle: 4.33 Hole Through Draw Tube: 3.50 Max Turning Diameter: 14.17 X Axis Travel: 9.05 Z Axis Travel: 50.0 20 Horsepower Price (US Funds): $36,000 Another great lathe from Okuma this one with longer Z axis travel. 7. 1998 Okuma Vertical Machining Centre MX45VAE Table Size: 20.0 X 39.4 10 Horsepower Spindle Taper: CAT 40 X Axis Travel: 30.0 Y Axis Travel: 18.1 Z Axis Travel: 17.7 Price (US Funds): $33,000 Okuma VMC with through the spindle coolant. Well maintained machine using MP2 maintenance software. June 14, 2015 Page 4 of 5
8. 1996 Okuma Vertical Machining Centre MX45VA Table Size: 18.1 X 29.9 10 Horsepower Spindle Taper: CAT 40 X Axis Travel: 22.0 Y Axis Travel: 18.1 Z Axis Travel: 17.7 Price (US Funds): $27,000 Japanese built VMC. Machine is equipped with Yuasa rotary table and drive. June 14, 2015 Page 5 of 5