Ship Cble Trys nd dders Ship Cble Trys System Height: H mm : 7-0 mm 2 types of perfortions Ship Cble dders System Height: H nd H mm : 00-000 mm 2 types of rungs Exmples of Components of Cble dder System Horizontl Bend DOPZ... Add-on Tee TDDOPZ... Verticl Bend PDOPZ... Horizontl Bend DOZ... Add-on Tee TDDOZ... Fixing Clmp MDOZ.. Connector DOU...
Ship cble try - system H Ship cble try KMSP...H/2 7x KMSP...H/2. mm kg Ctlogue mm mb /m KMSP7H/2 KMSP00H/2 7 00 2, 2,9 77 7 /2 /2 KMSP2H/2 2,49 78 /2 KMSPH/2 4,0 7 /2 KMSP0H/2 0,8 72 /2 KMSP2H/2 2 6. 7 /2 KMSP0H/2 0 7,4 7 /2 For instlltion use Screw Sets SGKFM6x2 00 Ship cble try KMSPP...H/2 7x KMSPP...H/2. mm kg Ctlogue mm mb /m KMSPP7H/2 KMSPP00H/2 7 00 2, 2,9 87 8 /2 /2 KMSPP2H/2 2,49 88 /2 KMSPPH/2 4,0 8 /2 KMSPP0H/2 0,8 82 /2 KMSPP2H/2 2 6, 8 /2 KMSPP0H/2 0 7,4 8 /2 For instlltion use Screw Sets SGKFM6x2 00 eding cble routes on ships nd drilling rigs Steel, hot-dip glv. to PN-EN ISO 46: (HDG) c. 4- µm. On request: E - stinless steel PN-EN 0088 2 Thickn. (g) [mm]:, 2,0 2,,0 4,0,0
Ship Cble dders - system H Ship cble ldder DOPZ...H/ 4 lub n zm. DOPZ...H/ kg Ctlogue mm mb /m DOPZ00H/ 0 2,70 4 / DOPZ0H/,0 42 / DOPZ0H/,4 42 / 4 9x 00 0 the side with prfortion in to produce Possibility 2. DOPZ...H/ Sfe Working od Q mx. in kn/m 2.00..00 0. 0,00 eding cble routes on ships nd drilling rigs Connector DOUH f H 00 Q mx..0.2..7 Spcing of Supports in [m] 2.0 0 DOUH kg Ctlogue pc. DOUH 0,09 4 Fixing Clmp MDOZH 7 9x8 MDOZH kg Ctlogue pc. MDOZH 0,0 42 Try Deflection f in [mm] t Q mx. Steel, hot-dip glv. to PN-EN ISO 46: (HDG) ok. 4- µm. Avilble finishes: E - stinless steel (SS) PN-EN 0088 9x Connecting cble ldder sections, direction chnge of route running horizontlly, direction chnge of route running verticlly 9x4 To fix cble ldders to brckets Steel glvnized using zinc flke coting method PN-EN ISO 068:4-09 Avilble finishes: E - stinless steel (SS) PN-EN 0088 Thickn. (g) [mm]: 2,0 2,,0 4,0,0 6,0
Ship Cble dders - system H Horizontl Bend DOPZ...H DOPZ...H kg Ctlogue mm pc. DOPZ00H DOPZ0H 0,7 42,9 42 DOPZ0H 2,49 42 For the ssembly use Connectors DOUH nd Screws SGKFM8x6 R00 00 9x Diversion in cble routing Add-on Tee TDDOPZ...H R00 9x TDDOPZ...H kg Ctlogue mm pc. TDDOPZ00H TDDOPZ0H 0 0,94 42,06 422 TDDOPZ0H,8 422 For the ssembly use Connectors DOUH nd Screws SGKFM8x6 00 Brnching out cble runs Verticl Bend PDOPZ...H 00 R 9x PDOPZ...H kg Ctlogue mm pc. PDOPZ00H PDOPZ0H 0,42 42,78 42 PDOPZ0H 2,4 42 For the ssembly use Connectors DOUH nd Screws SGKFM8x6 Diversion in cble routing Steel, hot-dip glv. to PN-EN ISO 46: (HDG) ok. 4- µm. Avilble finishes: E - stinless steel (SS) PN-EN 0088 4 Thickn. (g) [mm]: 2,0 2,,0 4,0,0 6,0
Ship Cble dders - system H Ship cble ldder DOZ...H/ 9x DOZ...H/ grubość G kg Ctlogue mm mm mb /m DOZ00H/ 06,,68 0 / DOZ0H/ 6, 2,7 / DOZ0H/ 6 2,0 2,67 / DOZ0H/ 6 2,0,8 / DOZ0H/ 6 2,0,69 / DOZ600H/ 606 2,0 4,7 60 / DOZ700H/ 706 2,0 4,74 70 / DOZ800H/ 806 2,0,2 80 / DOZ900H/ 906 2,0,76 90 / DOZ000H/ 006 2,0 6,2 / For the ssembly use connectors DOUH nd Screws SGKFM8x6 RUNG G 9 7 0 0 Sfe Working od Q mx. in kn/m Connector DOUH DOUH kg Ctlogue pc. DOUH 0,09 4 Fixing Clmp MDOZH 7 9x4 MDOZH kg Ctlogue pc. MDOZH 0,0 42 2 0 00 2.00..00 0. 0,00 eding cble routes on ships nd drilling rigs DOZ...H/ f H.0.2..7 Spcing of Supports in [m] 00 Q mx. 2.0 0 Try Deflection f in [mm] t Q mx. Steel, hot-dip glv. to PN-EN ISO 46: (HDG) ok. 4- µm. Avilble finishes: E - stinless steel (SS) PN-EN 0088 9x Connecting cble ldder sections, direction chnge of route running horizontlly, direction chnge of route running verticlly 9x4 To fix cble ldders to brckets Steel glvnized using zinc flke coting method PN-EN ISO 068:4-09 Avilble finishes: E - stinless steel (SS) PN-EN 0088 Thickn. (g) [mm]: 2,0 2,,0 4,0,0 6,0
Ship Cble dders - system H Horizontl Bend DOZ...H R0 DOZ...H kg Ctlogue mm pc. DOZ00H 06,88 DOZ0H 6 2,6 DOZ0H 6,42 DOZ0H 6 4,2 DOZ0H 6,84 DOZ600H 606 6,7 60 DOZ700H 706 7,8 70 DOZ800H DOZ900H DOZ000H 806 906 006 8,77 80 9,7 90 0,9 For the ssembly use Connectors DOUH nd Screws SGKFM8x6 9x Add-on Tee TDDOZ...H 9x TDDOZ...H kg Ctlogue mm pc. TDDOZ00H 06,2 TDDOZ0H 6,4 2 TDDOZ0H 6,8 2 TDDOZ0H 6,7 2 TDDOZ0H 6,92 2 TDDOZ600H 606 2,08 260 TDDOZ700H 706 2,27 270 TDDOZ800H TDDOZ900H TDDOZ000H 806 906 006 2,44 280 2,6 290 2,76 2 9x For the ssembly use Connectors DOUH nd Screws SGKFM8x6 Brnching out cble runs R0 Steel, hot-dip glv. to PN-EN ISO 46: (HDG) ok. 4- µm. Avilble finishes: E - stinless steel (SS) PN-EN 0088 6
Ship Cble dders - system H Ship cble ldder DOZ...H/ 9x DOZ...H/ grubość G kg Ctlogue mm mm mb /m DOZ00H/ 0,, 40 / DOZ0H/,,74 4 / DOZ0H/ 2,0 4,28 4 / DOZ0H/ 2,0 4,82 4 / DOZ0H/ 2,0,6 4 / DOZ600H/ 60 2,0 6,0 460 / DOZ700H/ 70 2,0 6,68 470 / DOZ800H/ 80 2,0 7, 480 / DOZ900H/ 90 2,0 8,00 490 / DOZ000H/ 00 2,0 8,60 4 / For the ssembly use connectors DOUH nd Screws SGKFM8x6 2 00 0 RUNG G 9 7 0 0 2. DOZ...H/ Sfe Working od Q mx. in kn/m 2.00..00 0. 0,00 Connector DOUH f H.0.2..7 Spcing of Supports in [m] eding cble routes on ships nd drilling rigs 00 Q mx. 2.0 0 Try Deflection f in [mm] t Q mx. DOUH kg Ctlogue pc. DUH 0,4 40 Steel, hot-dip glv. to PN-EN ISO 46: (HDG) ok. 4- µm. Avilble finishes: E - stinless steel (SS) PN-EN 0088 9x Connecting cble ldder sections, direction chnge of route running horizontlly, direction chnge of route running verticlly Fixing Clmp MDOZH 7 4 9x4 To fix cble ldders to brckets 9x4 MDOZH kg Ctlogue pc. MDOZH 0,0 44 Steel glvnized using zinc flke coting method PN-EN ISO 068:4-09 Avilble finishes: E - stinless steel (SS) PN-EN 0088 7 Thickn. (g) [mm]: 2,0 2,,0 4,0,0 6,0
Ship Cble dders - system H Horizontl Bend DOZ...H R0 DOZ...H kg Ctlogue mm pc. DOZ00H 0,46 4 DOZ0H 4,4 44 DOZ0H, 44 DOZ0H 6,6 44 DOZ0H 8,2 44 DOZ600H 60 9,6 4460 DOZ700H 70,0 4470 DOZ800H DOZ900H DOZ000H 80 90 00 2,6 4480 2,62 4490 4,88 44 For the ssembly use Connectors DOUH nd Screws SGKFM8x6 9x Diversion in cble routing Add-on Tee TDDOZ...H 9x TDDOZ...H kg Ctlogue mm pc. TDDOZ00H 0 2,60 44 TDDOZ0H 2,78 442 TDDOZ0H 2,96 442 TDDOZ0H,4 442 TDDOZ0H,2 442 TDDOZ600H 60, 44260 TDDOZ700H 70,80 44270 TDDOZ800H TDDOZ900H TDDOZ000H 80 90 00 4,00 44280 4, 44290 4, 442 For the ssembly use Connectors DOUH nd Screws SGKFM8x6 9x R0 Brnching out cble runs Steel, hot-dip glv. to PN-EN ISO 46: (HDG) ok. 4- µm. Avilble finishes: E - stinless steel (SS) PN-EN 0088 8
Support System Wll nd ceiling suspension Brcket WPT/WPTO 2x2 NOWx 0 x Suspending cble routes nd instlling cble trys, ldders, pipes nd other components, prticulrly where instlltion of cble runs is spce-restricted (e.g. bove suspended ceilings) Protective Cp Protecting instllers ginst cut from steel edges; improving overll product ppernce. 80 WPT/WPTO... ength Ctlogue kg mm pc WPT/WPTO00 0,48 7090 WPT 6 0,7 709 WPT0 2 0,6 709 WPT0 0,92 709 WPT0 4,2 709 WPT0, 709 NOWx mm Height H mm Ctlogue IMPORTANT! Non-stndrd lengths of brckets vilble upon request Single-sided lod distr. on ceiling brcket ength of ceiling 00 0 0 0 0 600 brcket in [mm] F Sfe Working od "F" 0. 0. 0.48 0.4 0.42 0. mx. in [kn] Double-sided lod distr. on ceiling brcket ength of ceiling brcket in [mm] 00 0 0 0 0 600 F F Sfe Working od "F" in [kn] 2. 2.00.70... mx. Sfe Working od "F mx. = cble weight + weight of cble try + weight of ceiling brcket + weight of brcket without n verge mn's (n instller's) weight. In cse of double-sided weight distribution the difference between the forces on both sides of the ceiling brcket must not exceed % vlue of its sfe working lod. 800 800 NOWx 7600 00 E-90 Steel, hot-dip glv. to PN-EN ISO 46: (HDG) Avilble finishes: E- stinless steel (SS) - powder coting in full rnge of colours (PC) (info p. 4) Polyethylene. Stndrd colour: green to RA 6029. Avilble finishes: white to RA 900, silver to RA 9006. Ceiling Brcket WPCW/WPCO 80 x WPCW/WPCO... WPCW/WPCO0 WPCW/WPCO0 WPCW/WPCO0 WPCW/WPCO0 ength mm 2 4 kg pc 0,90,0,,47 Ctlogue 76 76 76 76 0 0 E-90 NOxN Suspending cble routes. 2x2 Protective Cp Protecting instllers ginst cut from steel edges; improving overll product ppernce. 04 Single-sided lod distr. on ceiling brcket ength of ceiling 00 0 0 0 0 600 brcket in [mm] F Sfe Working od "F".80.60..00 0.90 0.80 mx. in [kn] Double-sided lod distr. on ceiling brcket ength of ceiling brcket in [mm] 00 0 0 0 0 600 F F Sfe Working od 2.60 2. 2.00.80.60. "F" mx. in [kn] Sfe Working od "F mx. = cble weight + weight of cble try + weight of ceiling brcket + weight of brcket without n verge mn's (n instller's) weight. In cse of double-sided weight distribution the difference between the forces on both sides of the ceiling brcket must not exceed % vlue of its sfe working lod. 800 800 NOxN Height Ctlogue H mm mm NOxN 760 00 Steel, hot-dip glv. to PN-EN ISO 46: (HDG) Avilble finishes: E- stinless steel (SS) - powder coting in full rnge of colours (PC) (info p. 4) Polyethylene. Stndrd colour: green to RA 6029. Avilble finishes: white to RA 900, silver to RA 9006. Instltion exmple of 2 levels of ship cble ldders mounted directly to brckets WPT... WPT/WPTO... E-90 - For detiled informtion, see BAKS min ctlogue, section X 9
Support System Wll nd ceiling suspension Brcket WWT x 2x2 0 WWT... ength Sfe Working od Ctlogue kg mm F mx[kn] pc WWT00,00 0, 700 WWT 6 2, 0,60 70 WWT0 2 2,00 0,69 70 WWT0,70 0,96 70 WWT0 4,60, 70 WWT0,,7 70 IMPORTANT! Non-stndrd lengths of brckets upon request /2 F 80 Suspending cble routes nd instlling cble trys, ldders, pipes nd other components, prticulrly where instlltion of cble runs is spce-restricted (e.g. bove suspended ceilings) Steel, hot-dip glv. to PN-EN ISO 46: (HDG) Avilble finishes: E- stinless steel (SS) - powder coting in full rnge of colours (PC) (info p. 4) UTM/UTMO 2,0 mm UTM/UTMO 9x8 UTM/UTMO Height H kg Ctlogue mm pc 66 0,7 7700 00 E-90 SGKF H 9x Instlling cble trys nd ldders in the proper distnce from the wll Screw Set SGKF... Dimension ength Dimension Ctlogue M D mm mm mm SGKFM8x6 8 6 7 642 00 set. Steel, strip-glv. cc. to the Sendzimir metod to PN-EN 046:-09 Avilble finishes: F- steel glvnized using zinc flke coting method PN-EN ISO 068:4-09 E- stinless steel (SS) - powder coting in full rnge of colours (PC) (info p. 4) M D Suspending cble runs Appliction Exmple of Ship Cble dder on Brcket WWT fixing clmp MDOZ... SGF Steel glvnized using zinc flke coting method PN-EN ISO 068:4-09 WPCW/WPCO... WWT... MDOZ... E-90 - For detiled informtion, see BAKS min ctlogue, section X 0 Thickn. (g) [mm]: 2,0 2,,0 4,0,0 6,0