Installation Systems. Hilti. Outperform. Outlast.

Systems Hilti. Outperform. Outlast. 446

Systems MM Channel System (galvanized) MM channels MM connectors 454-457 458-465 MQ Channel System (galvanized) MQ channels 466-469 MQ Connectors 470-480 MQ brackets 469-470 MC Channel System (galvanized) Overview MC system 481 MC brackets 483 MC channels MC connectors Base connectors & accessories (galvanized) 482 484-490 Beam clamp MAB 491 Threaded rod cutter 495 Threaded rods, washers, nuts, bolts 492-495 Pipe Rings (galvanized), Hangers and Riser clamps Overview Pipe rings 496 Pipe ring MP-LHI 499 Pipe ring MP-PI Pipe ring MP-HI Heavy-duty pipe ring MP-MI Heavy-duty pipe ring MP-MXI Sprinkler pipe hanger LH Sprinkler pipe hanger MP-SP Refrigeration pipe ring MI-CF Refrigeration pipe ring MIP-M Clevis hanger 497-498 500 501-502 503 504 505 506-507 508 509 MQ System (hot-dip galvanized) MQ channels HDG 511-516 MQ connectors HDG 518-525 MQ brackets HDG 516-517 MC System (hot-dip galvanized) MC channels HDG 526-528 MC connectors HDG 529-536 MC brackets HDG 528-529 Hot-dip Galvanized Parts Threaded rods, washers, nuts, bolts 537-539 MQ System (stainless steel) MQ channels SS 540-543 MQ connectors SS 544-547 MQ brackets SS 543 Stainless Steel Parts Threaded rods, washers, nuts, bolts 547-549 MI System (heavy-duty supports) MI Girders MI Connectors 551 551-564 Ventilation System Perforated band hanger 565 Air duct brackets MVA 566-567 565 Systems Perforated band LB 447

Systems Pipe fastening made easy SIMPLE... CLICK AND TIGHTEN. You have the pipes, we supply the rest the complete system for all of your pipe fastening needs. Cut pipes and installation channels easily, align them precisely, work cordlessly and install firestop solutions for maximum safety. Experience Hilti s technological lead. Surprisingly simple. Pipe fastening made easy. A simple click is all it takes. For efficient assembly. Even the trickiest jobs become easy with the new Hilti MM system. Simply push the connectors into the channel. The threaded plate engages securely in the toothed profile with an audible click during initial assembly. It s not only incredibly quick and convenient subsequent adjustment before final tightening simply couldn t be easier. The advantages of the new MM system at a glance Clever system for quick installation parts simply click together during initial assembly. Preassembled parts save time and made the installation easier and more convenient. The range of versatile MM-C channels covers all common applications. The flat head of the HUS-P screw anchor allows easy subsequent repositioning of the connectors even along the 16 mm channel. With the new beam clamps, MM channels can be fastened easily at the beam from both sides of the channel. The click-together MM channel system HUS-P screw anchor MM-T beam clamp 448

Systems You have the pipes, we supply the rest the complete system for all of your pipe fastening needs. With its tremendous 36V power, the compact WSR 36-A cordless reciprocating saw is ideal for a whole range of jobs such as cutting pipes and channels to length. The new TE 6-A36-AVR cordless rotary hammer can be fitted with its own self-contained dust removal attachment for virtually dustless drilling. Featuring the quick-acting safety cut-out known as Active Torque Control (ATC) plus Active Vibration Reduction, the TE 60-ATC Combihammer offers maximum working comfort and safety for making pipe penetrations and through holes in all kinds of jobs. CP 660 firestop foam is the simple solution for sealing round flammable and non-flammable pipes in openings where access is difficult. Innovative solutions for fastening piping. Systems PMC 46 Combilaser WSR 36-A cordless reciprocating saw MM-C installation channel MPN-RC pipe ring TE 6-A Li cordless rotary hammer SIW 14-A cordless impact screwdriver / HUS-P screw anchor TE 60-ATC Combihammer CP 644 firestop collar 449

Systems Air conditioning and ventilation supports Electrical cable trays supports Elevator supports 1 System specially developed for ventilation and AC applications 2 Can be quickly modified or adapted to accomodate changing site situations 3 Easy and quick installation of supporting structures for elevator support and anchoring to any type of base materials. 450

Systems Mechanical and electrical supports in mechanical room Air conditioning equipment support Pipe supports with expansion movement capability 4 Modular design reduces the need for detailed planning work. High strength and stability. 5 High corrosion protection-system available in hot dipped galvanised and stainless steel. 6 Complete pipe rings offer to be used in most of mechanical applications. Systems 451

Systems PROFIS PROFIS Profis is a Hilti PC applications for the static design of 3D structures assembled from Hilti channel installation system components. It is suitable for use with Microsoft Windows. Features and Functions - Design and static calculation of 3D support structures for pipes, cable trays and ventilation ducts - Design of structures to be fastened to concrete or to steel beams - Graphical presentation of 3D structures on the PC screen - 3D structures can be exported to PDS and PDMS as well as other CAD programs - Calculations for the static verification of structures with detailed report: Drawing (3D model) of the structure The applicable data Comments Calculation results Parts lists Working with PROFIS The data can be entered by the following means: - Using the buttons on the screen and/or - Clicking on the corresponding component or dimension and/or - Entering the data in the design data table Features and Functions 3D design window: The 3D view of the structure can be zoomed and shifted using the mouse or program buttons The button at the edge of the design window can be used to create a 3D structure Left side of screen: Project Explorer showing structure of the project Creation of instullation sub-project Creation of parts lists As an alternative to the design window, models can also be created or modified by entering data in the table page 5 452

Systems Products Characteristics System MM Light and Medium-duty Channel Innovative system Easy and quick installation Minimum parts for a diversity of applications Suitable for most light and medium mechanical and electrical support applications Ventilation duct supports Electrical cable trays supports System MQ Medium-Duty Channel Modular 3D system with unlimited number of connections Can be quickly modified or adapted to accommodate changing site situations Labour saving design with one-man installation Greatly reduce the need for welding and drilling Preassembled angle pieces allow rapid assembly, easy positioning and fast removal Modular design reduces the need for detailed planning work High strength and stability High corrosion protection-system also available in hot dipped galvanized and stainless steel Design software support Suitable for most mechanical and electrical support applications Horizontal and vertical heating pipe supports with expansion movement capability Vertical and horizontal fresh and waste water pipes fixing Ventilation duct supports Chilled water pipe supports Electrical cable trays and long bar supports Supporting industrial equipment and machinery Suspending ceiling supports System MC Medium-Duty Channel High flexibility and 3D capability with fewer connection parts The innovative connection technology with 3D channel design Compatible with MQ and MI Hilti installation systems Available in pre galvanized and hot-dipped galvanized coating Design software support available Electrical and instrumentation supports Integrated floor supports (Raised floor) Horizontal and vertical pipe supports Ventilation duct supports where 3D connectivity is required Suspending ceiling supports Supporting industrial equipment and machinery Busbar support System MI Industrial System Complete compatibility with MQ system High corrosion resistance Dynamic load tested System parts can weigh up to 50% less than conventional structures Non-welding - high flexibility PROFIS 3D support design software available Suitable for industrial pipes and cable tray support applications 3D applications Petrochemical applications Riser floor applications Elevator support Systems 453

Channel Systems channel MM-C-16 Fastening ventilation ducts and cable trays Fastening light to medium-duty pipe runs Recommended for use in dry interiors S250GD - DIN EN 10346 Sendzimir galvanized C-profile with serrated edges Reinforced slots for greater versatility Grid dimensions make installation and cutting easier Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MM-C-16 2m 16 mm 2 m 1 mm 565 g RAL-GZ 655-C 16 m 418748 MM-C-16 3m 16 mm 3 m 1 mm 565 g RAL-GZ 655-C 3 m 2038061 454

Channel Systems channel MM-C-30 Fastening ventilation ducts and cable trays Fastening light to medium-duty pipe runs Recommended for use in dry interiors S250GD - DIN EN 10346 Sendzimir galvanized C-profile with serrated edges Reinforced slots for greater versatility Grid dimensions make installation and cutting easier Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MM-C-30 3m 30 mm 3 m 1 mm 779 g RAL-GZ 655-C 3 m 2038062 MM-C-30 3m M10 30 mm 3 m 1 mm 779 g RAL-GZ 655-C 18 m 418776 Systems 455

Channel Systems channel MM-C-36 Fastening ventilation ducts and cable trays Fastening light to medium-duty pipe runs Recommended for use in dry interiors S250GD - DIN EN 10346 Sendzimir galvanized C-profile with serrated edges Reinforced slots for greater versatility Grid dimensions make installation and cutting easier Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MM-C-36 3m M10 36 mm 3 m 1.75 mm 1287 g RAL-GZ 655-C 18 m 418751 456

Channel Systems channel MM-C-45 Fastening ventilation ducts and cable trays Fastening light to medium-duty pipe runs S250GD - DIN EN 10346 Sendzimir galvanized Recommended for use in dry interiors C-profile with serrated edges Reinforced slots for greater versatility Grid dimensions make installation and cutting easier Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MM-C-45 3m 45 mm 3 m 1.75 mm 1875 g RAL-GZ 655-C 3 m 2048104 Systems 457

Channel Systems Bracket MM-B-30 For fastening light to medium-duty pipe runs For fastening ventilation ducts and cable trays Recommended for use in dry interiors Serrated C-section Reinforced slots for greater versatility and rigidity Matched to anchor loading capacity Material channel: S235 JR - DIN EN 10025-2, Material plate: S355 MC - DIN EN 10149-2 Galvanized Ordering designation Profile Length - L Material thickness Weight Sales pack Item number MM-B-30/200 MM-C-30 200 mm Channel: 1 mm, Baseplate: 4 mm 278 g 10 pc 418752 MM-B-30/300 MM-C-30 300 mm Channel: 1 mm, Baseplate: 4 mm 356 g 10 pc 418753 Bracket MM-B-36 For fastening light to medium-duty pipe runs For fastening ventilation ducts and cable trays Recommended for use in dry interiors Serrated C-section edge Elongated holes with flanged edges for greater versatility and strength Designed to match anchor loads Material channel: S235 JR - DIN EN 10025-2, Material plate: S355 MC - DIN EN 10149-2 Galvanized Ordering designation Profile Length - L Material thickness Weight Sales pack Item number MM-B-36/300 MM-C-36 300 mm Channel: 1.75 mm, Baseplate: 6 mm 585 g 10 pc 418754 MM-B-36/450 MM-C-36 450 mm Channel: 1.75 mm, Baseplate: 6 mm 778 g 10 pc 418755 MM-B-36/600 MM-C-36 600 mm Channel: 1.75 mm, Baseplate: 6 mm 971 g 10 pc 418756 458

Channel Systems Angle brace MM-AB Constructing wall brackets with various cantilever lengths Support for all MM system brackets fastened on walls Allows easy customization of stand-alone structures S235JR - DIN EN 10025 Galvanized Ordering designation Height - H Length - L Material thickness Weight Sales pack Item number MM-AB 202 mm 202 mm 2.5 mm 230 g 10 pc 418772 Pipe ring saddle MM-S Installing threaded rods for pipe and air duct suspension systems of threaded studs for fastening pipes Suitable for all three MM channel profiles Can be fitted and removed without need for tools Easy alignment in the right position S355 MC - DIN EN 10149-2 Galvanized Approvals RAL-GZ 655-D Systems 459

Channel Systems Ordering designation Thread - M Approvals Tightening torque Weight Sales pack Item number MM-S M6 M6 RAL-GZ 655-D 5 Nm 25 g 25 pc 418759 MM-S M8 M8 RAL-GZ 655-D 12 Nm 25 g 25 pc 418760 MM-S M10 M10 RAL-GZ 655-D 16 Nm 25 g 25 pc 418761 Wing nut MM-WN Fitting connectors to installation channels Connector for MM system installation channels Easy to handle Wing nut is flush mounted Handy, one-piece part Nut: DC04 - DIN EN 10130, Wing: PA Galvanized Ordering designation Thread - M Tightening torque Weight Sales pack Item number MM-WN M6 M6 5 Nm 12 g 50 pc 418764 MM-WN M8 M8 5 Nm 12 g 50 pc 418765 MM-WN M10 M10 5 Nm 12 g 50 pc 418766 460

Channel Systems Angle MM-A-90 Assembly of frames and supporting structures Joining channels at right angles Recommended for U-frame structures Pre-assembled for rapid installation Can be fitted to channels in various positions DC04 - DIN EN 10130 Galvanized Approvals RAL-GZ 655-D Ordering designation Thread - M Wrench size Approvals Tightening torque Weight Sales pack Item number MM-A-90 M8 13 mm RAL-GZ 655-D 12 Nm 75 g 20 pc 418757 Systems 461

Channel Systems Angle MM-AH-90 Assembly of frames and supporting structures Joining channels at right angles Pre-assembled for rapid installation Can be fitted to channels in various positions DC04 - DIN EN 10130 Galvanized Approvals RAL-GZ 655-D Ordering designation Thread - M Wrench size Approvals Tightening torque Weight Sales pack Item number MM-AH-90 M8 13 mm RAL-GZ 655-D 12 Nm 52 g 20 pc 418758 462

Channel Systems Rail support MM-R-16-36 Fastening channels to any supporting material Pre-assembled for rapid installation Reliable and easy to use Very easy alignment of the pre-assembled system Material: DC04 - DIN EN 10130, Plate: DD11 - DIN EN 10111 Galvanized Ordering designation Thread - M Wrench size Tightening torque Weight Sales pack Item number MM-R-16-36 M8 13 mm 12 Nm 390 g 10 pc 418762 Beam clamp MM-T-16-36 Fastening MM channel profiles to steel beams The beam clamp set fits all common T-beams (max. clamping thickness 23mm) EN-GJMB-550-4 - DIN EN 1562 Galvanized Extremely quick installation of MM channel system on steel beams without drilling or welding Easy alignment in the right position Systems 463

Channel Systems Ordering designation Thread - M Wrench size Sales pack Item number MM-T-16-36 M8 13 mm 20 pc 418763 Channel washer MM-CW Used to support suspended MM channel systems Used together with MM channels, wing nuts and brackets Perfectly matched to the MM installation channel system No lateral slippage possible thanks to an exact fit DD11 - DIN EN 10111 Galvanized Ordering designation Hole diameter - D Weight Sales pack Item number MM-CW M8 8.6 mm 15 g 20 pc 418769 MM-CW M10 10.6 mm 15 g 20 pc 418770 Channel end cap MM-E Edge protector for MM installation channel system Suitable for all MM installation channels Polypropylene (PP) Ordering designation Weight Sales pack Item number MM-E-16 2 g 50 pc 418773 MM-E-30 3 g 50 pc 418774 464

Channel Systems Ordering designation Weight Sales pack Item number MM-E-36 5 g 50 pc 418775 MM-E-45 6 g 25 pc 2048095 Rubber inlay MM-RI Acoustic insulation of MM channel air duct supports Insulating layer between M8 and M10 threaded rods and the ventilation duct Suitable for all MM installation channel systems and M8/M10 threaded rods Prevents direct contact between the air duct and the channel Large contact area between the channel insulation profile and the air duct avoids transmission of vibration and structure-borne sound EPDM Ageing resistance Tested as per DIN 53508 and 53509 Temperature resistance -40-110 C Resistance Hardness insulation material Noise reduction UV light, diluted acids and alkalis, alcohol solutions, water and waterbased solutions 55 ±5 Shore A 13 db (A) Ordering designation Length - L Weight Sales pack Item number MM-RI 10cm 0.1 m 33 g 100 pc 418768 MM-RI 20m 20 m 6660 g 1 pc 418767 Systems 465

Channel Systems channel MQ-21 Cable trays Pipework Air ducts S250GD - DIN EN 10346 Sendzimir galvanized C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21 3m 21 mm 3 m 2 mm 1438 g RAL-GZ 655-C 3 m 369584 MQ-21 6m 21 mm 6 m 2 mm 1438 g RAL-GZ 655-C 6 m 236647 MQ-21 6m 21 mm 6 m 2 mm 1438 g RAL-GZ 655-C 6 m 369585 channel MQ-31 Cable trays Pipework Air ducts S250GD - DIN EN 10346 Sendzimir galvanized C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-31 3m 31 mm 3 m 2 mm 1759 g RAL-GZ 655-C 3 m 369589 MQ-31 6m 31 mm 6 m 2 mm 1759 g RAL-GZ 655-C 6 m 369590 channel MQ-41 Cable trays Pipework Air ducts S250GD - DIN EN 10346 Sendzimir galvanized C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41 3m 41 mm 3 m 2 mm 2080 g RAL-GZ 655-C 3 m 369591 MQ-41 6m 41 mm 6 m 2 mm 2080 g RAL-GZ 655-C 6 m 369592 MQ-41 6m 41 mm 6 m 2 mm 2080 g RAL-GZ 655-C 6 m 236645 466

Channel Systems channel MQ-41/3 Cable trays Pipework Air ducts S250GD - DIN EN 10346 Sendzimir galvanized Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41/3 3m 41 mm 3 m 3 mm 2910 g Fire resistance test IBMB 3646/261/07, RAL- GZ 655-C 3 m 369596 MQ-41/3 6m 41 mm 6 m 3 mm 2910 g Fire resistance test IBMB 3646/261/07, RAL- GZ 655-C 6 m 369597 channel MQ-52 Cable trays Pipework Air ducts S250GD - DIN EN 10346 Sendzimir galvanized C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-52 6m 52 mm 6 m 2.5 mm 2942 g RAL-GZ 655-C 6 m 369598 MQ-52 6m 52 mm 6 m 2.5 mm 2942 g RAL-GZ 655-C 6 m 430797 channel MQ-72 Cable trays Pipework Air ducts S250GD - DIN EN 10346 Sendzimir galvanized C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-72 6m 72 mm 6 m 2.75 mm 4101 g RAL-GZ 655-C 6 m 430801 Systems 467

Channel Systems channel MQ-21 D Cable trays Pipework Air ducts S250GD - DIN EN 10346 Sendzimir galvanized Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Versatile, flexible and secure fastening with lateral and vertical adjustment Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21 D 6m 41 mm 6 m 2 mm 2904 g RAL-GZ 655-C 6 m 369602 Double installation channel MQ-41 D Cable trays Pipework Air ducts S250GD - DIN EN 10346 Sendzimir galvanized Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Versatile, flexible and secure fastening with lateral and vertical adjustment Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41 D 6m 83 mm 6 m 2 mm 4188 g RAL-GZ 655-C 6 m 369604 Double installation channel MQ-52-72 D Cable trays Pipework Air ducts S250GD - DIN EN 10346 Sendzimir galvanized Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Secure, versatile fastening method with lateral and vertical adjustment Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-52-72 D 6m 124 mm 6 m 2.5 mm, 2.75 mm 7078 g RAL-GZ 655-C 6 m 369605 468

Channel Systems Double installation channel MQ-124X D Cable trays Pipework Air ducts S250GD - DIN EN 10346 Sendzimir galvanized Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Secure, versatile fastening method with lateral and vertical adjustment Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-124X D 6m 124 mm 6 m 3 mm 9841 g RAL-GZ 655-C 6 m 369606 Bracket MQK-21 Stand-alone use on ceilings, walls and floors or combined with channel systems Recommended for installation in dry interiors For the installation of cable trays, air ducts and pipe supports S235JR - DIN EN 10025 Electrogalvanized - for dry indoor use only Serrated C-section Easy assembly and higher shear loads Pre-marked dimensions make installation, assembly and measurement easy Ordering designation Profile Length - L Material thickness Weight Sales pack Item number MQK-21/300 MQ-21 300 mm Channel: 2 mm, Baseplate: 6 mm 750 g 10 pc 369607 MQK-21/450 MQ-21 450 mm Channel: 2 mm, Baseplate: 6 mm 970 g 10 pc 369608 Bracket MQK-41 Stand-alone use on ceilings, walls and floors or combined with channel systems Recommended for installation in dry interiors For the installation of cable trays, air ducts and pipe supports S235JR - DIN EN 10025 Electrogalvanized - for dry indoor use only Serrated C-section Easy assembly and higher shear loads Pre-marked dimensions make installation, assembly and measurement easy Ordering designation Profile Length - L Material thickness Weight Approvals Sales pack Item number MQK-41/300 MQ-41 300 mm Channel: 2 mm, Baseplate: 8 mm 1030 g Fire resistance test IBMB 3646/261/07 MQK-41/450 MQ-41 450 mm Channel: 2 mm, Baseplate: 8 mm 1340 g Fire resistance test IBMB 3646/261/07 MQK-41/600 MQ-41 600 mm Channel: 2 mm, Baseplate: 8 mm 1700 g Fire resistance test IBMB 3646/261/07 10 pc 369609 10 pc 369610 10 pc 369611 Systems 469

Channel Systems Bracket MQK-72 Stand-alone use on ceilings, walls and floors or combined with channel systems Recommended for installation in dry interiors For the installation of cable trays, air ducts and pipe supports S235JR - DIN EN 10025 Electrogalvanized - for dry indoor use only Serrated C-section Easy assembly and higher shear loads Pre-marked dimensions make installation, assembly and measurement easy Ordering designation Profile Length - L Material thickness Weight Approvals Sales pack MQK-72/450 MQ-72 450 mm Channel: 2.75 mm, Baseplate: 10 mm 2670 g Fire resistance test IBMB 3646/261/07 Item number 6 pc 369615 MQK-72/600 MQ-72 600 mm Channel: 2.75 mm, Baseplate: 10 mm 3170 g Fire resistance test IBMB 3646/261/07 6 pc 369616 Angle brace MQK-S Recommended for fabricating wall brackets with individual stand-off lengths Increases the loadbearing capacity of brackets S235JR - DIN EN 10025 Electrogalvanized - for dry indoor use only Easily customized stand-alone structures Channel assembly in two positions is possible Two different lengths available Ordering designation Height - H Length - L a Material thickness Weight Sales pack Item number MQK-SK short 328 mm 324 mm 355 mm 3 mm 650 g 10 pc 369622 MQK-SL long 528 mm 524 mm 635 mm 3 mm 1060 g 10 pc 369621 Channel connector MQN Recommended for connecting angles to channels One-piece component for connecting channels and structural elements Universal: one and the same nut for all channels Fewer parts and high flexibility Universal: one pushbutton for all connectors and MQ installation channels Bolt: grade 8.8 - DIN EN ISO 898, Nut: QStE 380 TM, SEW 92, Plate: DD11 - DIN EN 10111 Electrogalvanized - for dry indoor use only 470

Channel Systems Ordering designation Thread - M Wrench size Tightening torque Weight Sales pack Item number MQN M10 17 mm 40 Nm 66 g 50 pc 369623 Wing nut MQM Simple part for connecting channels with structural elements Easy disassembly In-plane connection to channel possible Compact dimensions Wings: plastic PA, Nut: S355MC - DIN EN 10149-2 Electrogalvanized - for dry indoor use only Ordering designation Thread - M Tightening torque Weight Sales pack Item number MQM-M6 M6 10 Nm 23 g 50 pc 369624 MQM-M8 M8 20 Nm 23 g 50 pc 369698 Solid wing nut MQM Simple part for connecting channels to parts of structures Element for direct connection to channels Nut with flexible wing In-plane connection to channel possible Wings: plastic PA, Nut: C4C - DIN EN 10263 Electrogalvanized - for dry indoor use only Ordering designation Thread - M Tightening torque Weight Sales pack Item number MQM-M12 M12 40 Nm 33 g 50 pc 369627 Systems 471

Channel Systems Pipe ring saddle MQA Various suspensions with threaded rods Pipe ring saddle for pipe installation One-piece design Only one type of saddle nut for all MQ channels Versatile, one-piece design Nut: QStE 380 TM, SEW 92, Plate: DD11 - DIN EN 10111, Plastic: PA 6.6 Electrogalvanized - for dry indoor use only Ordering designation Thread - M Tightening torque Weight Sales pack Item number MQA-M6 M6 4 Nm 57 g 50 pc 369628 MQA-M8 M8 9 Nm 56 g 50 pc 369629 MQA-M10 M10 18 Nm 56 g 50 pc 369630 Pipe ring saddle MQA-B Various suspensions with threaded rods Pipe ring saddle for pipe installations with fire safety requirements Single-part design One and the same saddle nut for all MQ channels Easy alignment in the right position Nut: GTW45, DIN 1692, Plate: S 235 JRG2 - DIN EN 10025, Plastic: PBT Electrogalvanized - for dry indoor use only Approvals Fire resistance test IBMB 3646/261/07 Ordering designation Thread - M Approvals Tightening torque Weight Sales pack Item number MQA-M10-B M10 Fire resistance test IBMB 3646/261/07 18 Nm 87 g 50 pc 372471 MQA-M12-B M12 Fire resistance test IBMB 3646/261/07 31 Nm 83 g 50 pc 369631 MQA-M16-B M16 Fire resistance test IBMB 3646/261/07 40 Nm 84 g 50 pc 369632 Preassembled angle MQW-Q2 Assembly of frames and structures Connection of channels Pre-assembled for rapid installation High strength Material thickness Angle: DD11 - DIN EN 10111, Bolt: M10 grade 8.8 - DIN ISO 898 Electrogalvanized - for dry indoor use only 3 mm 472

Channel Systems Ordering designation Angle Wrench size Tightening torque Weight Sales pack Item number MQW-Q2 90 17 mm 40 Nm 200 g 20 pc 369655 Angle MQW 90 Assembly of frames and structures Quick installation Easy to handle S235JR - DIN EN 10025 Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Angle Weight Sales pack Item number MQW-3 90 160 g 20 pc 369656 MQW-4 90 220 g 10 pc 369658 MQW-8/90 90 420 g 10 pc 369659 Angle MQW 45 /135 Assembly of frames and structures Connection of channels Quick installation Reliable keying action Three dimensional, thus high strength Material thickness DD11 MOD - HN 547, S235JR - DIN EN 10025 Electrogalvanized - for dry indoor use only 4 mm Ordering designation Angle Weight Sales pack Item number MQW-3/45 45 155 g 20 pc 369657 MQW-8/45 45 410 g 10 pc 369660 Systems 473

Channel Systems Angle bracket MQW-S Assembly of frames and structures Attachment to walls, ceilings, floors Connection of channels Quick installation Universal: few parts for all applications Easy to handle S235JR - DIN EN 10025 Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Angle Weight Sales pack Item number MQW-S/1 90 460 g 10 pc 369664 MQW-S/2 90 1180 g 10 pc 369665 Connector 2-D MQV-2D Suitable for complex channel structures For clever single-plane channel design Universal: few parts for various applications Easy to use Two or three-dimensional, thus high strength S235JR - DIN EN 10025 Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQV-2/2 D 438 g 10 pc 369638 MQV-3/2 D 615 g 10 pc 369640 Connector 3-D MQV-3D For clever 3D channel design Universal: few parts for various applications Easy to use Three dimensional S235JR - DIN EN 10025 Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQV-3/3 D 451 g 10 pc 369641 474

Channel Systems Ordering designation Weight Sales pack Item number MQV-4/3 D 770 g 10 pc 369642 Channel tie - flat MQV Suitable for complex channel structures For clever single-plane channel design Universal: few parts for various applications Easy to use S235JR - DIN EN 10025 Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQV-P4 188 g 10 pc 369644 MQV-T 196 g 10 pc 369645 MQV-P5 240 g 10 pc 370631 Channel tie MQV For connecting two MQ channels together Joints between MQ-41, MQ-41/3 and MQ-72 channels have the full section modulus Joints between MQ-41 D, and MQ-52/72 channels using 2 connectors have the full section modulus For threaded rods /screws in elongated holes S235JR - DIN EN 10025 Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQV-41 1120 g 4 pc 286101 MQV-72 2300 g 4 pc 286102 Channel tie MQV-12 For connecting two MQ channels together Simple extension of channel length Joints between MQ-41 D, and MQ-52/72 channels using 2 connectors have the full section modulus High 3-dimensional rigidity S235JRG2 - DIN EN 10025 Material thickness Electrogalvanized - for dry indoor use only 4 mm Systems 475

Channel Systems Ordering designation Weight Sales pack Item number MQV-12 555 g 10 pc 369643 Rail support MQV-2/2 D Connection of channels to any supporting material High application flexibility Reliable and easy to use S235JR - DIN EN 10025 Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQV-2/2 D-14 438 g 10 pc 369639 Rail support MQP-1 Connection of channels to any supporting material High application flexibility Reliable and easy to use Material thickness DD11 MOD - HN 547, S235JR - DIN EN 10025 Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQP-1/1 110 g 20 pc 369646 MQP-1/3 190 g 20 pc 369647 Rail support MQP-45 Connection of channels to any supporting material High application flexibility Reliable and easy to use Secure, easy attachment at angles below 45 Material thickness DD11 MOD - HN 547, S235JR - DIN EN 10025 Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQP-45 350 g 10 pc 369649 476

Channel Systems Rail support MQP Connection of channels to any supporting material High application flexibility Reliable and easy to use DD11 MOD - HN 547, S235JR - DIN EN 10025 Electrogalvanized - for dry indoor use only Ordering designation Weight Approvals Sales pack Item number MQP-21-72 1150 g Fire resistance test IBMB 3646/261/07 12 pc 369651 MQP-82 1880 g 8 pc 369652 MQP-124 2730 g 6 pc 369653 Pivot base MQP Connection of channels to any supporting material High application flexibility Reliable and easy to use S235JR - DIN EN 10025 Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQP-G 1055 g 10 pc 369654 MQP-FG 2070 g 1 pc 284240 Universal joint MQP-U For universal use on inclined supporting components High application flexibility Can be set at any angle up to 90 Easy handling and height adjustment of the threaded rod S235JR - DIN EN 10025 Material thickness Additional product information Electrogalvanized - for dry indoor use only 5 mm To be used with threaded rod of at least 4.8 grade (DIN 976), 8.8 grade bolts (DIN 933), 8 grade nuts (DIN 934) and washers (DIN 125) - these items are not included Ordering designation Hole diameter - D Weight Sales pack Item number MQP-U M12 12.5 mm 390 g 10 pc 284248 MQP-U M16 16.5 mm 390 g 10 pc 284249 Systems 477

Channel Systems Beam clamp MQT For fastening MQ channels to steel beams without drilling or welding (use only in pairs!) No drilling or welding neccessary The attachment fits all standard beams (max. clamping thickness = 23 mm) Quick installation Claw plate: S235JR - DIN EN 10025, U-bolt: S235JRG2 - DIN EN 10025, Nut - DIN 50961 Electrogalvanized - for dry indoor use only Additional product information Beam clamps always to be used in pairs Ordering designation Thread - M Wrench size Tightening torque Weight Sales pack Item number MQT-21-41 M8 13 mm 10 Nm 500 g 10 pc 369675 MQT-41-82 M10 17 mm 20 Nm 650 g 10 pc 369676 MQT-82-124 M12 19 mm 30 Nm 860 g 10 pc 369677 Clamp (channel to channel) MQB Channel to channel/wall mounting S235JR - DIN EN 10025 Universal: few parts for all applications Easy to use Suitable for various MQ channel profiles Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQB-21 211 g 10 pc 369666 MQB-31 220 g 10 pc 369667 MQB-41 243 g 10 pc 369668 MQB-52 338 g 10 pc 369669 478

Channel Systems Clamp (channel to concrete) MQB For cross connection of MQ channels Pushbutton connector takes up shear and tensile loads Universal: few parts for all applications Easy to use S235JR - DIN EN 10025 Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQB-G41 366 g 10 pc 369674 Drilled plate MQZ-L For wall, ceiling or floor attachment of angles, connectors or brackets For fastening metric threaded parts to MQ channel S235JR - DIN EN 10025 Electrogalvanized - for dry indoor use only Matching items in program Matches the MQ channel system perfectly Suitable for MQ installation channels and brackets Ordering designation Hole diameter - D Weight Approvals Sales pack Item number MQZ-L9 9.5 mm 92 g 20 pc 369678 MQZ-L11 11.5 mm 88 g Fire resistance test IBMB 3646/261/07 20 pc 369679 MQZ-L13 13.5 mm 84 g Fire resistance test IBMB 3646/261/07 20 pc 369680 MQZ-L17 17.5 mm 80 g Fire resistance test IBMB 3646/261/07 20 pc 369681 washer MQZ-U For use at butterfly holes, M10 anchor, M10 bolt Matching items in program All connectors can be installed with standard M10 bolts S235JR - DIN EN 10025 Electrogalvanized - for dry indoor use only Ordering designation Weight Sales pack Item number MQZ-U 30 g 40 pc 369692 Channel tie, shear brace MQZ For connecting installation channels back to back Easy fabrication of double channels using channel ties and magnetic wrench Easy to fit in the elongated holes in the channel S235JR - DIN EN 10025 Electrogalvanized - for dry indoor use only Systems 479

Channel Systems Ordering designation Thread - M Wrench size Material thickness Tightening torque Weight Sales pack Item number MQZ-SV M8 13 mm 4 mm 6 Nm 26 g 40 pc 369690 MQZ-SS M10 13 mm 3.5 mm 20 Nm 62 g 40 pc 369691 Channel end cap MQZ-E Provides protection when handling sharp cut edges Clean-cut appearance Additional protection when handling installation channels with sharp, cut edges Polypropylene (PP) Ordering designation Weight Sales pack Item number MQZ-E21 3 g 50 pc 370598 MQZ-E31 4 g 50 pc 369686 MQZ-E41 5 g 50 pc 369685 3D-system MQ3D Assembly of 3-D structures on site Bracing and stiffening of complex fastening solutions Universal: few parts for all applications Quick and easy to use 45 angle and bracing with predetermined bending point Material thickness MQ3D-B, MQ3D-W45: QStE 380 TM - SEW 092; MQ3D-W90, MQ3D-A: DD11 - DIN EN 10111; Bolt: steel grade 8.8 Electrogalvanized - for dry indoor use only 3 mm Ordering designation Angle Thread - M Wrench size Tightening torque Weight Sales pack Item number MQ3D-A 45 M10 17 mm 40 Nm 95 g 20 pc 369697 480

Channel Systems Overview System MC Galvanized Channels Brackets Longitudinal conn. End cap MC-3D-41 3m 2063295 MC-3D-41 6m 2063294 MC-72 6m 2063298 MC-B-3D-41/450 2063724 MC-BE-320 2063731 MC-CL 2063761 MC-B-3D-41/650 2063725 MC-BE-630 2063732 MC-B-3D-41/1000 2063726 MQZ-E31 369686 MQZ-E41 369685 Base Connector Channel Connectors Angles MC-CB 2061832 MC-CH 2063282 MC-CU 2063763 MC-A-90 2063771 MC-AH-90 2063734 MC-AF-90 2063741 Channel nuts Channel screws Channel stiffener Channel plate MC-WN-M10 2063743 MC-WN-3D 2063736 MC-SI-M10 2063750 MC-S-M10 2063738 MC-PI 2063719 MC-PU 2073360 Accessories Systems M10x20 2064292 M10x65 2063243 M10-SL 2063246 A10,5/28 2064293 481

Channel Systems channel MC-3D-41 Cable tray supports indoors Integrated floor supports Instrumentation supports indoors Connectivity from all channel sides High flexibility in terms of fastening type and direction Dimension marks for easy cutting and installation Structural steel with a minimum yield strength of 280 N/mm2 Sendzimir galvanized Ordering designation Height Length Material thickness Weight per metre length Sales pack Item number MC-3D-41 3m 41 mm 3 m 1.6 mm 1713 g 3 m 2063295 MC-3D-41 6m 41 mm 6 m 1.6 mm 1713 g 6 m 2063294 channel MC-72 Cable tray supports indoors Integrated floor supports Instrumentation supports indoors Serrated C-section profile High load capacity Dimension marks for easy cutting and installation Structural steel with a minimum yield strength of 250 N/mm2 Galvanized Ordering designation Height Length Material thickness Weight per metre length Sales pack Item number MC-72 6m 72 mm 6 m 2.75 mm 4108 g 6 m 2063298 482

Channel Systems Bracket MC-B-3D-41 Cable tray supports indoors Instrumentation supports indoors Integrated floor supports Connectivity from all channel sides High flexibility Serrated C-section profile Structural steel with a minimum yield strength of 275 N/mm2 for the channel, 355 N/mm2 for the plate Electrogalvanized Ordering designation Profile Length - L Material thickness Weight Sales pack Item number MC-B-3D-41/450 MC-3D-41 450 mm 1.6 mm 1242 g 12 pc 2063724 MC-B-3D-41/650 MC-3D-41 650 mm 1.6 mm 1508 g 12 pc 2063725 MC-B-3D-41/1000 MC-3D-41 1000 mm 1.6 mm 2150 g 12 pc 2063726 Electrical bracket MC-BE Cable tray supports indoors Easy to install Various fastening options High load performance Structural steel with a minimum yield strength of 250 N/mm2 Sendzimir galvanized Ordering designation Height - H Length - L a Material thickness Weight Sales pack Item number MC-BE-320 97 mm 322 mm 50 mm 1.5 mm 557 g 12 pc 2063731 MC-BE-630 147 mm 632 mm 100 mm 1.5 mm 1138 g 12 pc 2063732 Systems 483

Channel Systems Longitudinal channel connector MC-CL [ Longitudinal connector for MC channels % [ Easy to use on the open side or back of the channel Compatible with all MC channels High load capacity $ [ Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized Material thickness 4 mm & [ [ [ [ Ordering designation Weight MC-CL 708 g Sales pack Item number 2063761 20 pc Base connector MC-CB [ [ Connection of MC channels to concrete Fastening to floors, ceilings or walls % Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized & [ [ [ [ [ [ 484 Various, easy installation options Height adjustment High load capacity $ [

Channel Systems Ordering designation Weight Sales pack Item number MC-CB 925 g 12 pc 2061832 Angle MC-A-90 Connection of MC channels at 90 degrees Assembly of two and three-dimensional modular system structures Various, easy installation options Can be fitted regardless of the direction in which the open side of the channel is facing High load capacity Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized 4 mm Ordering designation Angle Weight Sales pack Item number MC-A-90 90 324 g 1 pc 2063771 Height-adjustable angle MC-AH-90 Connection of MC channels at 90 degrees Assembly of two and three-dimensional modular system structures Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized High application flexibility Easy height adjustment along full channel length and on all channel sides High shear load capacity Material thickness 4 mm Systems 485

Channel Systems Ordering designation Angle Weight Sales pack Item number MC-AH-90 90 174 g 20 pc 2063734 Flat angle MC-AF-90 Connection of MC channels at 90 degrees Various, easy installation options High application flexibility Strong and cost-efficient connection Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized 4 mm Ordering designation Weight Sales pack Item number MC-AF-90 128 g 20 pc 2063741 486

Channel Systems Height-adjustable connector MC-CH Cross-connector for MC channels Three-dimensional structures such as integrated floor supports Easy to install Height adjustment High load capacity Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized 4 mm Ordering designation Weight Sales pack Item number MC-CH 710 g 20 pc 2063282 Universal connector MC-CU Connection of MC-3D channel to Hilti MC and MI installation channels Connection of MC-3D channel to concrete Bracing for modular system structures Various, easy installation options High flexibility in terms of fastening type and direction Multiple function as channel and base connector Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized 4 mm Systems 487

Channel Systems Ordering designation Weight Sales pack Item number MC-CU 338 g 12 pc 2063763 Wing nut MC-WN-M10 Fastening bolts and threaded rods at the open side of MC channel Fastening connectors at the open side of MC channel, anywhere along its length QStE 380 TM - SEW 092 Electrogalvanized Easy-to-use single part For universal use with all channel sizes Reusable Ordering designation Thread - M Tightening torque Weight Sales pack Item number MC-WN-M10 M10 40 Nm 22 g 50 pc 2063743 Wing nut MC-WN-3D Fastening bolts and threaded rods at any side of MC-3D channel Fastening connectors at any side of MC-3D channel Assembly of two and three-dimensional modular system structures QStE 380 TM - SEW 092 Electrogalvanized High application flexibility Easy-to-use single part Allows connection from all sides of MC-3D channel 488

Channel Systems Ordering designation Thread - M Tightening torque Weight Sales pack Item number MC-WN-3D M10 40 Nm 41 g 20 pc 2063736 Universal plate MC-PU Load distribution plate for use where bolts and threaded rods are fitted through MC channel Various, easy installation options Can be fitted on all sides of MC-3D channel Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized Ordering designation Material thickness Hole diameter - D Weight Sales pack Item number MC-PU 4 mm 13.5 mm 53 g 100 pc 2073360 Channel insert screw MC-SI-M10 Assembly of two and three-dimensional modular system structures Fitting connectors to the back or side of MC-3D channel Steel grade 8.8 Electrogalvanized Strong and cost-efficient connection High application flexibility Can be fitted at the back or side of MC-3D channel Ordering designation Thread - M Weight Sales pack Item number MC-SI-M10 M10 17 g 100 pc 2063750 Systems 489

Channel Systems Channel connection screw MC-S-M10 Assembly of two and three-dimensional modular system structures Fitting connectors to the back of MC channels Steel grade 8.8 Electrogalvanized Strong and cost-efficient connection High application flexibility Fits at the back of MC channels Ordering designation Thread - M Weight Sales pack Item number MC-S-M10 M10 47 g 100 pc 2063738 Channel stiffener insert MC-PI Channel stiffening insert for use where bolts and threaded rods are fitted through MC channels Easy-to-use single part Surface level with channel after installation Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized Ordering designation Weight Sales pack Item number MC-PI 20 g 50 pc 2063719 490

Base Connectors Beam clamp MAB For fastening to steel beams without drilling or welding on steel beams without drilling or welding Through-hole without thread Infinite height adjustment possible after loosening the lock nut, also subsequently EN-GJMB-350-10 Galvanized Ordering designation Thread - M Hole diameter - D X Y Maximum tensile load - F Approvals Weight Sales pack Item number MAB-9 M8 9 mm 20.9 mm 18 mm 1.2 kn 81 g 12 pc 375956 MAB-11 M10 11 mm 23.4 mm 19.5 mm 2.5 kn FM approved, UL approved 143 g 12 pc 375957 EX15279 MAB-13 M10 13 mm 35 mm 26 mm 3.5 kn FM approved, UL approved 216 g 12 pc 375958 EX15279 MAB-17 M12 17 mm 30 mm 28.5 mm 5.5 kn FM approved, UL approved EX15279 318 g 12 pc 228155 Systems 491

Accessories Threaded rod AM Steel grade 4.8 - DIN 976-1 Galvanized Ordering designation Thread - M Length - L Sales pack Item number AM6x1000 4.8 zinced M6 1000 mm 20 pc 339792 AM6x3000 4.8 zinced M6 3000 mm 20 pc 216412 AM8x1000 4.8 zinced M8 1000 mm 20 pc 339793 AM8x2000 4.8 zinced M8 2000 mm 20 pc 339794 AM8x3000 4.8 zinced M8 3000 mm 20 pc 216415 AM10x1000 4.8 zinced M10 1000 mm 20 pc 339795 AM10x2000 4.8 zinced M10 2000 mm 20 pc 339796 AM10x3000 4.8 zinced M10 3000 mm 20 pc 216418 AM12x2000 4.8 zinced M12 2000 mm 15 pc 216420 AM12x3000 4.8 zinced M12 3000 mm 15 pc 216421 AM16x1000 4.8 zinced M16 1000 mm 5 pc 216422 AM16x2000 4.8 zinced M16 2000 mm 5 pc 216423 AM16x3000 4.8 zinced M16 3000 mm 5 pc 216424 AM20x1000 4.8 zinced M20 1000 mm 5 pc 216425 AM20x2000 4.8 zinced M20 2000 mm 5 pc 212632 AM24x2000 4.8 zinced M24 2000 mm 5 pc 212633 Flat washer DIN 125 Steel 200 HV-A2K - DIN EN ISO 7089 Galvanized Ordering designation Inside diameter - DI Outside diameter - DA Cross section thickness - s Sales pack Item number A 6,4/12 zinced 6.4 mm 12 mm 1.6 mm 500 pc 282849 A 8,4/16 zinced 8.4 mm 16 mm 1.6 mm 200 pc 282850 A 10,5/20 zinced 10.5 mm 20 mm 2 mm 100 pc 282851 A 13/24 zinced 13 mm 24 mm 2.5 mm 100 pc 282852 A 17/30 zinced 17 mm 30 mm 3 mm 100 pc 282853 A 21/37 zinced 21 mm 37 mm 3 mm 50 pc 282854 A 25/44 zinced 25 mm 44 mm 3 mm 50 pc 282855 Flat washer similar to DIN 125 Steel Galvanized 492

Accessories Ordering designation Inside diameter - DI Outside diameter - DA Cross section thickness - s Sales pack Item number A 6,4/28 zinced 6.4 mm 28 mm 2 mm 200 pc 282860 A 8,4/28 zinced 8.4 mm 28 mm 2 mm 200 pc 282861 A 8,4/40 zinced 8.4 mm 40 mm 3 mm 100 pc 282856 A10,5/28 zinced 10.5 mm 28 mm 2 mm 100 pc 2064293 A 10,5/28 zinced 10.5 mm 28 mm 2 mm 100 pc 282862 A 10,5/40 zinced 10.5 mm 40 mm 3 mm 100 pc 282857 A 13/40 zinced 13 mm 40 mm 3 mm 100 pc 282858 A 17/40 zinced 17 mm 40 mm 3 mm 100 pc 282859 Hexagon nut Steel grade 8 Galvanized Ordering designation Thread - M Height - H Wrench size - W Sales pack Item number M6 zinced M6 5 mm 10 mm 100 pc 216464 M8 zinced M8 7 mm 13 mm 100 pc 216465 M10 zinced M10 8 mm 17 mm 100 pc 216466 M12 zinced M12 10 mm 19 mm 100 pc 216467 M16 zinced M16 13 mm 24 mm 50 pc 216468 M20 zinced M20 16 mm 30 mm 50 pc 216469 M24 zinced M24 19 mm 36 mm 50 pc 216470 Prevailing torque hexagon nut M10-SL Steel grade 8 Electrogalvanized Ordering designation Tightening torque Weight Sales pack Item number M10-SL zinced 40 Nm 15 g 100 pc 2063246 Hexagon bolt Steel grade 8.8 Galvanized Ordering designation Thread - M Thread length - L Height - H Wrench size - W Sales pack Item number M6x16 zinced M6 16 mm 4 mm 10 mm 100 pc 216443 M6x25 zinced M6 25 mm 4 mm 10 mm 100 pc 216444 M6x40 zinced M6 40 mm 4 mm 10 mm 100 pc 216445 M8x16 zinced M8 16 mm 5 mm 13 mm 100 pc 216446 M8x20 zinced M8 20 mm 5 mm 13 mm 100 pc 216447 M8x25 zinced M8 25 mm 5 mm 13 mm 100 pc 216448 Systems 493

Accessories Ordering designation Thread - M Thread length - L Height - H Wrench size - W Sales pack Item number M8x30 zinced M8 30 mm 5 mm 13 mm 100 pc 47425 M8x55 zinced M8 55 mm 5 mm 13 mm 100 pc 216450 M10x16 zinced M10 16 mm 6 mm 17 mm 100 pc 216452 M10x20 zinced M10 20 mm 6 mm 17 mm 100 pc 2064292 M10x20 zinced M10 20 mm 6 mm 17 mm 100 pc 216453 M10x25 zinced M10 25 mm 6 mm 17 mm 100 pc 216454 M10x30 zinced M10 30 mm 6 mm 17 mm 100 pc 47426 M10x35 zinced M10 35 mm 6 mm 17 mm 100 pc 216455 M10x55 zinced M10 55 mm 6 mm 17 mm 100 pc 216456 M12x22 zinced M12 22 mm 8 mm 19 mm 50 pc 216457 M12x25 zinced M12 25 mm 8 mm 19 mm 50 pc 216458 M12x35 zinced M12 35 mm 8 mm 19 mm 50 pc 216459 M16x40 zinced M16 40 mm 10 mm 24 mm 50 pc 47427 Hexagon screw DIN 931 Steel grade 8.8 Electrogalvanized Ordering designation Thread - M Thread length - L a Height - H Wrench size - W Weight Sales pack Item number M10x65 zinced M10 27 mm 65 mm 6 mm 17 mm 45 g 100 pc 2063243 Spacer coupling, round Steel Galvanized Ordering designation Thread - M Length - L Diameter - D Sales pack Item number M6x30 round M6 30 mm 10 mm 100 pc 216433 M8x30 round M8 30 mm 11 mm 50 pc 216435 M8x40 round M8 40 mm 11 mm 50 pc 216436 M10x30 round M10 30 mm 13 mm 50 pc 216437 M10x40 round M10 40 mm 13 mm 50 pc 216438 M12x30 round M12 30 mm 16 mm 50 pc 216439 M12x40 round M12 40 mm 16 mm 50 pc 216440 M16x60 round M16 60 mm 20 mm 20 pc 216441 494

Accessories Spacer coupling Steel grade 4.6 Galvanized Ordering designation Thread - M Length - L Wrench size - W Sales pack Item number M6x18 M6 18 mm 10 mm 50 pc 70063 M8x25 M8 25 mm 13 mm 50 pc 216703 M8x40 M8 40 mm 13 mm 50 pc 432188 M10x30 M10 30 mm 17 mm 50 pc 216704 M12x40 M12 40 mm 19 mm 50 pc 216705 M16x40 M16 40 mm 24 mm 25 pc 216706 Threaded rod cutter NK-M/MRC Cutting threaded rods Cuts M6/M8/M10 threaded rods easily without burring or producing swarf Supplied complete with two pre-assembled dies (M8/M10) Saves time on site by offering two cutting possibilities Steel Painted Ordering designation Thread - M Sales pack Item number MRC - M8/10 1 pc 295418 MRC - M6 M6 1 pc 295414 MRC - M8 M8 1 pc 295412 MRC - M10 M10 1 pc 295413 Systems 495

Pipe Rings Overview Pipe Rings Pipe Ring Picture Techincal Data Features Approvals Fresh water distribution pipes Heating Pipes Gas distribution pipes Waste water distribution pipes Chilled water pipes Sprinkler pipes Light industrial applications Corrosive Surroundings Recommended static load for suspended installation - Frec Average noise reduction - (ΔL) Temperature resistance Clamping range Connection boss Special features Light and medium-duty galvanized pipe rings MP-PI 750-2500 N 16 db(a) -40 to +110 ºC 11-326 mm M8, M8/ M10, M12 Securely fixed rubber inlay High quality, with third party approvals MP-HI M8/M10 600-1500 N 17 db(a) -40 to +110 ºC 8-172 mm M8/M10 Securely fixed rubber inlay Safe closure with click feedback Double connection boss 1) MP-H M8/M10 500-1000 N 16-172 mm M8/M10 Safe closure with click feedback Double connection boss MPN-RC 450-1800 N 15 db(a) -40 to +110 ºC 8-170 mm M8/M10 M16 Three-stage quick closure Innovative low-friction strip for easy pipe positioning MPN-GK 750 N 17 db(a) -50 to +110 ºC 16-63 mm M8 and M8/ M10 Three-stage quick closure Special partial flock coating for low friction Heavy-duty galvanized pipe rings 1) Only clamping range 8 mm to 110 mm MP-MI 1800-4500 N 19 db(a) -40 to +110 ºC 15-250 mm M10/M12, M16, 1/2, 3/4 Solidly made, strong and rigid Welded clamping nuts Civil protection approval 2) MP-M 1800-4500 N 15-224 mm M16, 1/2, 3/4 Solidly made, strong and rigid Welded clamping nuts Civil protection approval MP-MXI 2400-17000 N 16 db(a) -50 to +120 ºC 60-508 mm M10/ M12, M16, 3/4, 1 Highest loads upto 17 kn Dynamic load tested Civil protection approval 3) MP-MX 4000-17000 N 60-508 mm M10/ M12, M16, 3/4, 1 Highest loads upto 17 kn Dynamic load tested 4) 3) Chilled water and sprinkler systems galvanized pipe rings 2) Only clamping range 15 mm to 200 mm 3) Only boss sizes M16, 3/4, 1 4) Only M10/12 and M16 MIP-M/-H/-T 40-12800 N 16 db(a) -40 to +105 ºC 10-457 mm M8/ M10, M16 Completely isolated system Thermal conductivity -0,030 W/mK Integrated vapour barrier MI-CF 30-3840 N -80 to +140 ºC 10-273 mm M8, M10, M10/M12, M16 Thermal conductivity -0,030 W/mK Integrated vapour barrier Version with load sheet available KF 150-29230 N -160 to +130 ºC 12.7-609 mm M8/1/2, M10/1/2, 3/4, M16, M20, M24 Thermal conductivity -0,042 W/mK High load capacity Absolute accurate fit of support surfaces MP-SP 2000-7000 N 3/4-8 or 27-219 mm M8,M10, M12. M16 Rapid installation thanks to click closure system System approved by Vds, FM and UL LH 2000-8000 N 1/2-8 or 20-224 mm M10, M12 System approved by FM and UL MP-MS 3200-5500 N 20-219 mm M8,M10, M12. M16 Welded clamping nuts System approved by Vds, FM and UL SDC 2800-16500 N 1/2-12 or 20-324 mm M10, M12. M16, M20, M24 Easy height adjustment System approved by FM and UL Hot-dipped galvanized pipe rings MP-MI-F 1800 N 18 db(a) -50 to +120 ºC 20-90 mm M10 Good resistance to corrosion (45 µm) MP-M-F 1800 N 20-90 mm M10 Good resistance to corrosion (45 µm) MP-MXI-F 2400-17000 N 16 db(a) -50 to +120 ºC 60-508 mm M10/ M12, M16 Good resistance to corrosion (45 µm) High loads to 17 kn MP-MX-F 4000-17000 N 60-508 mm M16 Good resistance to corrosion (45 µm) High loads to 17 kn Stainless steel pipe rings MP-SRNI 1300-1800 N 15 db(a) -50 to +120 ºC 15-64 mm M8, M10 High quality 1.4571 / 1.4404 (A4) MP-SRN 2000 N 15-65 mm M8, M10 High quality 1.4571 / 1.4404 (A4) MP-MRI 3000-5000 N 18 db(a) -50 to +120 ºC 68-224 mm M10, M12, M16 High quality 1.4571 / 1.4404 (A4) MP-MR 3000-5000 N 68-224 mm M10, M12, M16 High quality 1.4571 / 1.4404 (A4) MP-MRXI 10000-13000 N 16 db(a) -50 to +120 ºC 244-508 mm M16 High quality 1.4571 / 1.4404 (A4) 496

Pipe Rings Pipe ring MP-PI Fresh water distribution pipes Waste water distribution pipes Heating and gas distribution pipes Securely fixed rubber inlay no dropping out High-quality product with third-party approvals with two threaded rods possible for sizes 8 inch and above to achieve higher loads SPCC-SD FB - Q/BQB402, DC01 EN 10130 Galvanized Temperature resistance -40-110 C Hardness insulation material Noise reduction Approvals Additional product information Insulation material 75 ±5 Shore A 16 db (A) Acustic insulaton DIN 4109 inspected, Fire Class E The maximum load of 5000 N in accordance with RAL-GZ 655-B can be achieved if pipe rings 8 inches in diameter and larger are fastened with two threaded rods EPDM Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Distance between holes - A Sales pack Item number Kit MP-PI 11-15 1/4 M8 (900) 1 pc 2098539 Kit MP-PI 81-87 M8/M10 (300) 1 pc 2099064 Kit MP-PI 87-92 3 M8/M10 (300) 1 pc 2099065 Kit MP-PI 99-105 31/2 M8/M10 1 pc 2099066 (300) Kit MP-PI 107-115 4 M8/M10 1 pc 2099067 (300) Kit MP-PI 162-170 6 M8/M10 1 pc 2099068 (300) Kit MP-PI 16-20 3/8 M8 (900) 1 pc 2099120 Kit MP-PI 20-24 1/2 M8 (900) 1 pc 2099121 Kit MP-PI 25-28 3/4 M8 (900) 1 pc 2099122 Kit MP-PI 32-36 1 M8 (900) 1 pc 2099123 Kit MP-PI 38-46 11/4 M8 (600) 1 pc 2099124 Kit MP-PI 48-53 11/2 M8 (600) 1 pc 2099125 Kit MP-PI 54-58 M8 (600) 1 pc 2099126 Kit MP-PI 59-66 2 M8 (600) 1 pc 2099127 Kit MP-PI 67-73 M8/M10 (300) 1 pc 2099128 Kit MP-PI 75-80 21/2 M8/M10 1 pc 2099129 (300) MP-PI 11-15 1/4 M8 11-15 mm 1/4 in 54 mm 20 x 1.2 mm 22 mm 750 N 39 mm 150 pc 2073431 MP-PI 16-20 3/8 M8 16-20 mm 3/8 in 58 mm 20 x 1.2 mm 24 mm 750 N 42 mm 150 pc 2073432 Systems 497

Pipe Rings Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Distance between holes - A Sales pack Item number MP-PI 20-24 1/2 M8 20-24 mm 1/2 in 62 mm 20 x 1.2 mm 26 mm 750 N 47 mm 150 pc 2073433 MP-PI 25-28 3/4 M8 25-28 mm 3/4 in 68 mm 20 x 1.2 mm 30 mm 750 N 53 mm 150 pc 2073434 MP-PI 32-36 1 M8 32-36 mm 1 in 76 mm 20 x 1.2 mm 32 mm 750 N 61 mm 150 pc 2073435 MP-PI 38-46 11/4 M8 38-46 mm 1-1/4 in 91 mm 20 x 1.2 mm 37 mm 750 N 74 mm 100 pc 2073436 MP-PI 48-53 11/2 M8 48-53 mm 1-1/2 in 98 mm 20 x 1.2 mm 40 mm 750 N 81 mm 100 pc 2073437 MP-PI 54-58 M8 54-58 mm 105 mm 20 x 1.5 mm 44 mm 1250 N 87 mm 100 pc 2073438 MP-PI 59-66 2 M8 59-66 mm 2 in 111 mm 20 x 1.5 mm 48 mm 1250 N 94 mm 100 pc 2073439 MP-PI 67-73 M8/M10 67-73 mm 119 mm 20 x 1.5 mm 62 mm 1250 N 101 mm 50 pc 2073470 MP-PI 75-80 21/2 M8/M10 75-80 mm 2-1/2 in 124 mm 20 x 1.5 mm 64 mm 1250 N 106 mm 50 pc 2073471 MP-PI 81-87 M8/M10 81-87 mm 134 mm 20 x 1.5 mm 68 mm 1250 N 116 mm 50 pc 2073472 498

Pipe Rings Residential pipe ring MP-LHI Light-duty pipe installation up to 2 Fastening drinking water pipes and heating pipes in residential and industrial construction Gas distribution pipes Quick-release closure with only one clamping screw - easy, quick closing and easy re-opening The adhesive-bonded acoustic insulation insert doesn t drop out during installation Short connection boss for closer installation to walls or ceilings DC01 - DIN EN 10130 Galvanized Temperature resistance -40-110 C Hardness insulation material Noise reduction Approvals Insulation material 45 ±5 Shore A 17 db (A) Acustic insulaton DIN 4109 inspected, Fire class B2, RAL-GZ 655-B EPDM rubber Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x s) Max. extension from centre - b1 Distance centre pipe to top - h Maximum load - F Sales pack Item number MP-LHI 12-16 1/4 M8 12-16 mm 1/4 in 47 mm 20 x 0.8 mm 27 mm 22 mm 400 N 25 pc 2020539 MP-LHI 20-25 1/2 M8 20-25 mm 1/2 in 56 mm 20 x 0.8 mm 30 mm 27 mm 400 N 25 pc 2020731 MP-LHI 25-31 3/4 M8 25-31 mm 3/4 in 62 mm 20 x 0.8 mm 34 mm 30 mm 400 N 25 pc 2020732 MP-LHI 31-38 1 M8 31-38 mm 1 in 70 mm 20 x 0.8 mm 37 mm 34 mm 400 N 25 pc 2020733 MP-LHI 38-45 1 1/4 M8 38-45 mm 1-1/4 in 77 mm 20 x 1.2 mm 41 mm 37 mm 750 N 25 pc 2020734 MP-LHI 45-52 1 1/2 M8 45-52 mm 1-1/2 in 85 mm 20 x 1.2 mm 45 mm 42 mm 750 N 25 pc 2020735 MP-LHI 52-59 M8 52-59 mm 92 mm 20 x 1.2 mm 49 mm 45 mm 750 N 25 pc 2020736 MP-LHI 59-66 2 M8 59-66 mm 2 in 100 mm 20 x 1.2 mm 53 mm 49 mm 750 N 10 pc 2020737 Systems 499

Pipe Rings Residential pipe ring MP-HI Light-duty pipe installation up to 6 diameter Fastening drinking water pipes and heating pipes in residential and industrial construction Gas distribution pipes Two-screw pipe ring with side swivelling mechanism Safe click closure for easy and fast pre-fixing Clamping range without gaps DC01 - DIN EN 10130 Galvanized Temperature resistance -40-110 C Hardness insulation material Noise reduction Approvals Insulation material 40 ±5 Shore A 17 db (A) Acustic insulaton DIN 4109 inspected, Fire class B2, RAL-GZ 656 EPDM rubber Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Noise reduction Sales pack Item number MP-HI 8-12 M8/M10 assy 8-12 mm 52 mm 20 x 1 mm 30 mm 600 N 17 db (A) 25 pc 386402 MP-HI 12-16 M8/M10 assy 12-16 mm 1/4 in 52 mm 20 x 1 mm 30 mm 600 N 17 db (A) 25 pc 386403 MP-HI 16-20 M8/M10 assy 16-20 mm 3/8 in 57 mm 20 x 1 mm 32 mm 600 N 17 db (A) 25 pc 386404 MP-HI 20-25 M8/M10 assy 20-25 mm 1/2 in 62 mm 20 x 1 mm 35 mm 600 N 17 db (A) 25 pc 386405 MP-HI 25-31 M8/M10 assy 25-31 mm 3/4 in 69 mm 20 x 1 mm 38 mm 600 N 17 db (A) 25 pc 386406 MP-HI 31-38 M8/10 assy 31-38 mm 1 in 76 mm 20 x 1 mm 41 mm 600 N 17 db (A) 25 pc 386407 MP-HI 38-45 M8/M10 assy 38-45 mm 1-1/4 in 86 mm 20 x 1.2 mm 46 mm 750 N 17 db (A) 25 pc 386408 MP-HI 45-52 M8/M10 assy 45-52 mm 1-1/2 in 93 mm 20 x 1.2 mm 49 mm 750 N 17 db (A) 25 pc 386409 MP-HI 52-59 M8/M10 assy 52-59 mm 100 mm 20 x 1.2 mm 53 mm 750 N 17 db (A) 25 pc 386410 MP-HI 59-66 M8/M10 assy 59-66 mm 2 in 108 mm 20 x 1.2 mm 57 mm 750 N 17 db (A) 10 pc 386411 MP-HI 66-75 M8/M10 assy 66-75 mm 128 mm 25 x 1.8 mm 63 mm 1200 N 17 db (A) 10 pc 386412 MP-HI 75-84 M8/M10 assy 75-84 mm 2-1/2 in 137 mm 25 x 1.8 mm 67 mm 1200 N 17 db (A) 10 pc 386413 MP-HI 84-93 M8/M10 assy 84-93 mm 3 in 146 mm 25 x 1.8 mm 72 mm 1200 N 17 db (A) 10 pc 386414 MP-HI93-101 M8/M10 assy 93-101 mm 155 mm 25 x 1.8 mm 76 mm 1200 N 17 db (A) 10 pc 386415 MP-HI101-110M8/M10 assy 101-110 mm 164 mm 25 x 1.8 mm 81 mm 1200 N 17 db (A) 10 pc 386416 MP-HI110-119M8/10 assy 110-119 mm 4 in 175 mm 25 x 2.2 mm 86 mm 1500 N 17 db (A) 10 pc 386417 MP-HI119-129M8/M10 assy 119-129 mm 185 mm 25 x 2.2 mm 91 mm 1500 N 17 db (A) 10 pc 386418 MP-HI129-137M8/M10 assy 129-137 mm 193 mm 25 x 2.2 mm 95 mm 1500 N 17 db (A) 10 pc 386419 MP-HI137-145M8/M10 assy 137-145 mm 5 in 203 mm 25 x 2.2 mm 100 mm 1500 N 17 db (A) 10 pc 386420 MP-HI145-155M8/M10 assy 145-155 mm 211 mm 25 x 2.2 mm 104 mm 1500 N 17 db (A) 10 pc 386421 MP-HI155-163M8/10 assy 155-163 mm 220 mm 25 x 2.2 mm 109 mm 1500 N 17 db (A) 10 pc 386422 MP-HI163-172M8/M10 assy 163-172 mm 6 in 228 mm 25 x 2.2 mm 113 mm 1500 N 17 db (A) 10 pc 386423 500

Pipe Rings Heavy-duty pipe ring MP-MI M10/M12 Heavy-duty pipe installations in diameters up to 250 mm of industrial pipework Process and control lines M8 clamping screws, secured against loss, with comination cross-recess head Welded-on heavy-duty nuts for clamping screw sizes 68 / 72 and above Pre-assembled non-slip rubber profile S235JRG - DIN EN 10025 Galvanized Temperature resistance -40-110 C Hardness insulation material Noise reduction Approvals Insulation material 50 ±5 Shore A 19 db (A) Acustic insulaton DIN 4109 inspected, Fire class B2 EPDM rubber Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Noise reduction Sales pack Item number MP-MI 3/8 G 15-19 mm 3/8 in 64 mm 24 x 2 mm 33 mm 1800 N 19 db (A) 25 pc 20843 MP-MI 1/2 G 20-25 mm 1/2 in 69 mm 24 x 2 mm 36 mm 1800 N 19 db (A) 25 pc 20845 MP-MI 1 G 32-38 mm 1 in 83 mm 24 x 2 mm 42 mm 1800 N 19 db (A) 25 pc 20849 MP-MI 1 1/4 G 40-45 mm 1-1/4 in 92 mm 24 x 2 mm 47 mm 1800 N 19 db (A) 25 pc 20851 MP-MI 1 1/2 G 48-54 mm 1-1/2 in 101 mm 24 x 2 mm 50 mm 1800 N 19 db (A) 25 pc 20853 MP-MI 54/57 G 54-57 mm 107 mm 24 x 2 mm 53 mm 1800 N 19 db (A) 10 pc 20855 MP-MI 2 G 57-64 mm 2 in 111 mm 24 x 2 mm 55 mm 1800 N 19 db (A) 10 pc 20857 MP-MI 68/72 G 68-72 mm 123 mm 24 x 2 mm 60 mm 1800 N 19 db (A) 10 pc 20860 MP-MI 2 1/2 G 70-77 mm 2-1/2 in 130 mm 24 x 2 mm 64 mm 1800 N 19 db (A) 10 pc 20862 MP-MI 78/84 G 80-84 mm 139 mm 24 x 2 mm 68 mm 1800 N 19 db (A) 10 pc 20865 MP-MI 3 G 82-90 mm 3 in 144 mm 24 x 2 mm 71 mm 1800 N 19 db (A) 10 pc 20866 MP-MI 101.6 G 97-103 mm 163 mm 30 x 2.5 mm 78 mm 2400 N 19 db (A) 5 pc 20869 MP-MI 4 G 108-114 mm 4 in 174 mm 30 x 2.5 mm 84 mm 2400 N 19 db (A) 5 pc 20871 MP-MI 125 G 122-127 mm 187 mm 30 x 2.5 mm 90 mm 2400 N 19 db (A) 5 pc 20876 MP-MI 133 G 132-137 mm 198 mm 30 x 2.5 mm 95 mm 2400 N 19 db (A) 10 pc 20879 MP-MI 5 G 137-142 mm 5 in 203 mm 30 x 2.5 mm 98 mm 2400 N 19 db (A) 10 pc 20882 MP-MI 159 G 156-162 mm 223 mm 30 x 2.5 mm 107 mm 2400 N 19 db (A) 10 pc 20885 MP-MI 6 G 162-168 mm 6 in 229 mm 30 x 2.5 mm 110 mm 2400 N 19 db (A) 10 pc 20887 Systems 501

Pipe Rings Heavy-duty pipe ring MP-MI M16 Heavy-duty pipe installations in diameters up to 250 mm of industrial pipework Process and control lines M8 clamping screws, secured against loss, with comination cross-recess head Welded-on heavy-duty nuts for clamping screw sizes 68 / 72 and above Pre-assembled non-slip rubber profile S235JRG - DIN EN 10025 Galvanized Temperature resistance -40-110 C Hardness insulation material Noise reduction Approvals Insulation material 50 ±5 Shore A 19 db (A) Acustic insulaton DIN 4109 inspected, Fire class B2 EPDM rubber Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Noise reduction Sales pack Item number MP-MI 2 C 57-64 mm 2 in 111 mm 24 x 2 mm 56 mm 1800 N 19 db (A) 10 pc 20858 MP-MI 2 1/2 C 70-77 mm 2-1/2 in 130 mm 24 x 2 mm 65 mm 1800 N 19 db (A) 10 pc 20863 MP-MI 3 C 82-90 mm 3 in 144 mm 24 x 2 mm 72 mm 1800 N 19 db (A) 10 pc 20867 MP-MI 133 C 132-137 mm 198 mm 30 x 2.5 mm 96 mm 2400 N 19 db (A) 10 pc 20880 MP-MI 159 C 156-162 mm 223 mm 30 x 2.5 mm 107 mm 2400 N 19 db (A) 10 pc 229087 MP-MI 6 C 162-168 mm 6 in 229 mm 30 x 2.5 mm 111 mm 2400 N 19 db (A) 10 pc 20888 MP-MI 193.7 C 190-200 mm 263 mm 30 x 3 mm 127 mm 4500 N 19 db (A) 10 pc 20892 MP-MI 212 C 210-219 mm 283 mm 30 x 3 mm 136 mm 4500 N 19 db (A) 10 pc 20894 MP-MI 219.1 C 217-224 mm 8 in 288 mm 30 x 3 mm 139 mm 4500 N 19 db (A) 10 pc 20896 MP-MI 244.5 C 242-250 mm 314 mm 30 x 3 mm 152 mm 4500 N 19 db (A) 5 pc 20898 502

Pipe Rings Heavy-duty pipe ring (metric) MP-MXI Heavy-duty installations up to 508 mm Process and control lines Heavy-duty pipe runs Solid connection boss, welded all round Strong clamping bolts for high loads Non-slip, pre-fitted profiled rubber inlay DD11 - DIN EN 10111 Galvanized Temperature resistance -50-120 C Hardness insulation material Noise reduction Approvals Insulation material 50 ±5 Shore A 16 db (A) Acustic insulaton DIN 4109 inspected, Fire class B2 EPDM rubber Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Distance between holes - A Sales pack Item number MP-MXI 4 M16 108-116 mm 4 in 210 mm 40 x 4 mm 90 mm 3100 N 172 mm 25 pc 372229 MP-MXI 125 M16 122-126 mm 221 mm 40 x 4 mm 95 mm 3100 N 183 mm 25 pc 372230 MP-MXI 133 M16 132-138 mm 231 mm 40 x 4 mm 100 mm 3100 N 193 mm 10 pc 372231 MP-MXI 5 M16 139-144 mm 5 in 238 mm 40 x 4 mm 104 mm 3100 N 200 mm 10 pc 372232 MP-MXI 159 M16 159-166 mm 261 mm 40 x 4 mm 115 mm 3100 N 223 mm 10 pc 372233 MP-MXI 6 M16 163-170 mm 6 in 265 mm 40 x 4 mm 117 mm 7500 N 234 mm 10 pc 372234 MP-MXI 177.8 M16 177-182 mm 284 mm 40 x 4 mm 123 mm 7500 N 246 mm 10 pc 372235 MP-MXI 193.7 M16 192-200 mm 303 mm 40 x 4 mm 132 mm 7500 N 264 mm 10 pc 372236 MP-MXI 210 M16 210-218 mm 321 mm 40 x 4 mm 141 mm 7500 N 283 mm 10 pc 372237 MP-MXI 219 M16 219-228 mm 330 mm 40 x 4 mm 146 mm 7500 N 292 mm 10 pc 372238 MP-MXI 244.5 M16 244-253 mm 355 mm 40 x 4 mm 158 mm 7500 N 317 mm 10 pc 372239 MP-MXI 267/274 M16 267-274 mm 375 mm 40 x 4 mm 167 mm 7500 N 334 mm 10 pc 372240 MP-MXI 275 M16 275-282 mm 384 mm 40 x 4 mm 173 mm 7500 N 346 mm 10 pc 372241 MP-MXI 324 M16 315-324 mm 441 mm 50 x 5 mm 190 mm 11000 N 391 mm 1 pc 372242 MP-MXI 326 M16 325-330 mm 445 mm 50 x 5 mm 192 mm 11000 N 394 mm 1 pc 372243 MP-MXI 368 M16 364-372 mm 488 mm 50 x 5 mm 213 mm 11000 N 437 mm 1 pc 372245 MP-MXI 406 M16 400-409 mm 525 mm 50 x 5 mm 232 mm 11000 N 474 mm 1 pc 372246 MP-MXI 457 M16 454-462 mm 586 mm 70 x 6 mm 259 mm 17000 N 530 mm 1 pc 372247 MP-MXI 508 M16 500-508 mm 632 mm 70 x 6 mm 282 mm 17000 N 577 mm 1 pc 372248 Systems 503

Pipe Rings Sprinkler pipe hanger LH Sprinkler installations Cost-efficient pipe installation thanks to pre-assembled sprinkler band hangers Coordinated system of sprinkler components from one supplier - reduces administrative work as you are dealing with only one company Carbon steel type B - ASTM A653M- 06a, SGCC - JISG 3302 Galvanized Ordering designation Clamping range - D Nominal pipe size (imperial) Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Approvals Sales pack Item number LH 1/2 M10 20-25 mm 1/2 in 16 x 1.2 mm 62 mm 2000 N UL approved EX15279 100 pc 388612 LH 3/4 M10 27-28 mm 3/4 in 16 x 1.2 mm 63 mm 2000 N UL approved EX15279, 100 pc 388613 FM approved LH 1 M10 34-35 mm 1 in 16 x 1.2 mm 67 mm 2000 N UL approved EX15279, 100 pc 388614 FM approved LH 1-1/4 M10 42-45 mm 1-1/4 in 16 x 1.2 mm 71 mm 2000 N UL approved EX15279, 100 pc 388615 FM approved LH 1-1/2 M10 48-51 mm 1-1/2 in 16 x 1.2 mm 77 mm 2000 N UL approved EX15279, 100 pc 388616 FM approved LH 2 M10 57-64 mm 2 in 16 x 1.2 mm 79 mm 2000 N UL approved EX15279, 100 pc 388617 FM approved LH 2-1/2 M10 70-76 mm 2-1/2 in 19 x 2 mm 98 mm 4500 N UL approved EX15279, FM approved 100 pc 388618 504

Pipe Rings Sprinkler pipe hanger M10, M12, M16 MP-SP Sprinkler installations Insert the pipe, press to close, click - that s all Time-saving solution Simple levelling with the new height adjuster with one hand: no accident risk as the pipe and pipe ring don t have to be swivelled round to be screwed onto the threaded rod, and no special nut is required DX51D Z275 - DIN EN 10327 Approvals Galvanized FM approved, UL approved EX2709, VDS approved G4930027 Ordering designation Clamping range - D Nominal pipe size (imperial) Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Approvals MP-SP 3/4 -M10 27-28 mm 3/4 in 21 x 1.5 mm 50 mm 2000 N FM approved, UL approved EX2709, VDS approved G4930027 MP-SP 1 -M10 34-35 mm 1 in 21 x 1.5 mm 50 mm 2000 N FM approved, UL approved EX2709, VDS approved G4930027 MP-SP 1 1/4 -M10 42-45 mm 1-1/4 in 21 x 1.5 mm 58 mm 2000 N FM approved, UL approved EX2709, VDS approved G4930027 MP-SP 1 1/2 -M10 48-51 mm 1-1/2 in 21 x 1.5 mm 65 mm 2000 N FM approved, UL approved EX2709, VDS approved G4930027 MP-SP 2 -M10 57-64 mm 2 in 21 x 1.5 mm 73 mm 2000 N FM approved, UL approved EX2709, VDS approved G4930027 MP-SP 2 1/2 -M10 70-76 mm 2-1/2 in 20 x 2.5 mm 78 mm 5000 N FM approved, UL approved EX2709, VDS approved G4930027 MP-SP 3 -M10 83-89 mm 3 in 20 x 2.5 mm 96 mm 5000 N FM approved, UL approved EX2709, VDS approved G4930027 MP-SP 108-M10 102-108 mm MP-SP 4 -M10 108-114 mm MP-SP 133-M12 133-133 mm MP-SP 5 -M12 139-140 mm MP-SP 159-M12 159-159 mm MP-SP 6 -M12 165-169 mm MP-SP 219,1-M16 219-220 mm 20 x 2.5 mm 5000 N FM approved, UL approved EX2709, VDS approved G4930027 4 in 20 x 2.5 mm 131 mm 5000 N FM approved, UL approved EX2709, VDS approved G4930027 24 x 2.5 mm 108 mm 6000 N FM approved, UL approved EX2709, VDS approved G4930027 5 in 24 x 2.5 mm 115 mm 6000 N FM approved, UL approved EX2709, VDS approved G4930027 24 x 2.5 mm 133 mm 6000 N FM approved, UL approved EX2709, VDS approved G4930027 6 in 24 x 2.5 mm 142 mm 6000 N FM approved, UL approved EX2709, VDS approved G4930027 35 x 2.5 mm 186 mm 7000 N FM approved, UL approved EX2709, VDS approved G4930027 Sales pack Item number 100 pc 229041 100 pc 229042 50 pc 229043 50 pc 229044 50 pc 229045 25 pc 216597 25 pc 216598 25 pc 216599 25 pc 216600 25 pc 216601 25 pc 216602 25 pc 216603 25 pc 216604 10 pc 216605 Systems 505

Pipe Rings Refrigeration pipe ring MI-CF For installing chilled pipes up to 3 diameter in industrial and air conditioning applications Fastening pipes for refrigeration and air-conditioning systems Contains no H-CFCs or CFCs Easy initial installation of the pipe thanks to the two-screw pipe ring with pivot mechanism Closed-cell polyurethane foam Galvanized Temperature resistance -80-140 C Thermal conductivity (λ approx. value) Approx. density Compressive strength 0.03 W/mK 80 kg/m³ 0.7 N/mm² Diffusion resistance Impermeable = Ordering designation Diameter - D Nominal pipe size (imperial) Cross section width and thickness (b x s) Maximum load - F Clamping screw Tightening torque Sales pack Item number MI-CF 21/25 21.3 mm 1/2 in 75 x 25 mm 50 N M16 20 Nm 20 pc 373652 MI-CF 27/25 26.9 mm 3/4 in 75 x 25 mm 100 N M6 2 Nm 20 pc 372634 MI-CF 34/25 33.7 mm 1 in 75 x 25 mm 125 N M6 2 Nm 20 pc 372880 MI-CF 42/25 42.4 mm 1-1/4 in 75 x 25 mm 155 N M6 2 Nm 12 pc 372635 MI-CF 48/25 48.3 mm 1-1/2 in 75 x 25 mm 180 N M6 2 Nm 12 pc 372636 MI-CF 60/25 60.3 mm 2 in 75 x 25 mm 220 N M6 2 Nm 10 pc 372637 MI-CF 76/25 76.1 mm 2-1/2 in 75 x 25 mm 280 N M6 2 Nm 10 pc 372638 506

Pipe Rings Refrigeration pipe ring MI-CF Fastening pipes for refrigeration and air-conditioning systems Closed-cell polyurethane foam Contains no H-CFCs or CFCs Impact-resistant, aluminium-pet-aluminium laminations Easy initial installation of the pipe thanks to the two-screw pipe ring with pivot mechanism Galvanized Temperature resistance -80-140 C Thermal conductivity (λ approx. value) Approx. density 0.03 W/mK 80 kg/m³ Compressive strength 0.7 N/mm² Diffusion resistance Impermeable Approvals Fire class B2 = Ordering designation Diameter - D Nominal pipe size (imperial) Cross section width and thickness (b x s) Maximum load - F Approvals Clamping screw Tightening torque Sales pack Item number MI-CF 21/30 21.3 mm 1/2 in 75 x 30 mm 80 N Fire class B2 M6 2 Nm 20 pc 372639 MI-CF 27/30 26.9 mm 3/4 in 75 x 30 mm 100 N Fire class B2 M6 2 Nm 16 pc 372640 MI-CF 34/30 33.7 mm 1 in 75 x 30 mm 125 N Fire class B2 M6 2 Nm 12 pc 372641 MI-CF 42/30 42.4 mm 1-1/4 in 75 x 30 mm 155 N Fire class B2 M6 2 Nm 12 pc 372642 MI-CF 48/30 48.3 mm 1-1/2 in 75 x 30 mm 180 N Fire class B2 M6 2 Nm 12 pc 372643 MI-CF 54/30 54 mm 75 x 30 mm 160 N Fire class B2 M6 2 Nm 12 pc 372644 MI-CF 60/30 60.3 mm 2 in 75 x 30 mm 220 N Fire class B2 M6 2 Nm 10 pc 372645 MI-CF 76/30 76.1 mm 2-1/2 in 75 x 30 mm 280 N Fire class B2 M6 2 Nm 10 pc 372646 MI-CF 89/30 88.9 mm 3 in 100 x 30 mm 325 N Fire class B2 M6 2 Nm 10 pc 372647 Systems 507

Pipe Rings Refrigeration pipe ring (medium insulated) MIP-M For installing chilled pipes and ducts up to 410 mm diameter in industrial and air-conditioning applications Designed for standard thicknesses of insulating material (material: elastomeric caoutchouc) Excellent joint between refrigeration pipe ring and insulating material (elastomeric caoutchouc) Completely isolated system (no thermal short-circuits) Temperature resistance -40-105 C Noise reduction Thermal conductivity (λ approx. value) Approx. density CFC-free PUR/PIR (elastomer), outside bearing shells made of painted aluminium sheeting 0.8 mm thick Galvanized 15 db (A) 0.036 W/mK 145 kg/m³ Diffusion resistance 7000 Approvals Acustic insulaton DIN 4109 inspected, Fire class B2 Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x s) Max. extension from centre - b1 Distance centre pipe to top - h Maximum load - F Sales pack Item number MIP-M/10-12 10-14 mm 1/4 in 94 mm 55 x 20 mm 44 mm 48 mm 40 N 18 pc 314144 MIP-M/15-18 15-18 mm 3/8 in 102 mm 55 x 20 mm 48 mm 52 mm 50 N 18 pc 314145 MIP-M/21-25 21-26 mm 1/2 in 107 mm 55 x 20 mm 51 mm 55 mm 75 N 12 pc 314146 MIP-M/27-30 27-31 mm 3/4 in 113 mm 55 x 21 mm 54 mm 57 mm 75 N 12 pc 314147 MIP-M/34-38 33-39 mm 1 in 119 mm 65 x 22 mm 57 mm 64 mm 150 N 12 pc 314148 MIP-M/42-45 42-46 mm 1-1/4 in 134 mm 65 x 22 mm 64 mm 68 mm 200 N 12 pc 314149 MIP-M/54-57 53-58 mm 154 mm 65 x 23 mm 76 mm 75 mm 300 N 12 pc 314151 MIP-M/60-64 59-65 mm 2 in 161 mm 75 x 23 mm 79 mm 79 mm 475 N 12 pc 314152 MIP-M/76-80 75-81 mm 2-1/2 in 176 mm 85 x 24 mm 86 mm 86 mm 750 N 12 pc 314154 MIP-M/89 88-90 mm 3 in 186 mm 100 x 24 mm 91 mm 91 mm 1100 N 10 pc 314155 MIP-M/102-108 101-109 mm 216 mm 100 x 25 mm 107 mm 107 mm 1300 N 8 pc 314156 MIP-M/114 113-115 mm 4 in 214 mm 116 x 25 mm 105 mm 105 mm 1700 N 6 pc 314157 MIP-M/133 130-134 mm 235 mm 116 x 25 mm 119 mm 116 mm 2000 N 6 pc 314684 MIP-M/140 138-141 mm 5 in 254 mm 116 x 25 mm 133 mm 126 mm 2000 N 6 pc 314159 MIP-M/159-160 158-161 mm 274 mm 118 x 25 mm 138 mm 136 mm 2200 N 6 pc 314160 MIP-M/165-168 164-169 mm 6 in 274 mm 128 x 25 mm 138 mm 136 mm 2600 N 3 pc 314161 MIP-M/216-219 216-219 mm 363 mm 170 x 25 mm 182 mm 154 mm 5000 N 3 pc 314162 MIP-M/267-273 267-275 mm 428 mm 170 x 25 mm 210 mm 183 mm 6000 N 1 pc 314163 508

Pipe Hangers and Riser Clamps Standard duty clevis hanger SDC Heavy-duty support for piping systems All models are for use with ANSI/MSS SP-58 (Type 1) heavyduty sizes Attachment to threaded rod porvides easy installation and hight adjustment Q235B - ASTM A36 Electrogalvanized Ordering designation Nominal pipe size (imperial) Distance centre pipe to top - h Cross section width - b SDC 1/2 EG 1/2 in 41 mm 19 mm M10 UL approved EX15279 SDC 1-1/4 EG 1-1/4 in 59 mm 25 mm M10 UL approved EX15279 SDC 1 EG 1 in 51 mm 19 mm M10 UL approved EX15279 SDC 2-1/2 EG 2-1/2 in 96 mm 30 mm M12 UL approved EX15279, FM approved SDC 2 EG 2 in 76 mm 25 mm M10 UL approved EX15279 SDC 3/4 EG 3/4 in 47 mm 19 mm M10 UL approved EX15279 SDC 3 EG 3 in 109 mm 30 mm M12 UL approved EX15279, FM approved SDC 4 EG 4 in 136 mm 30 mm M16 UL approved EX15279, FM approved SDC 5 EG 5 in 163 mm 30 mm M16 UL approved EX15279, FM approved SDC 6 EG 6 in 196 mm 38 mm M20 UL approved EX15279, FM approved SDC 8 EG 8 in 242 mm 38 mm M20 UL approved EX15279, FM approved SDC 10 EG 10 in 299 mm 50 mm M24 UL approved EX15279 SDC 12 EG 12 in 305 mm 50 mm M24 UL approved EX15279 Rod size - RS Approvals Allowable load Weight Sales pack Item number 2.8 kn 0.07 kg 50 pc 388634 2.8 kn 0.12 kg 25 pc 388637 2.8 kn 0.08 kg 50 pc 388636 4.8 kn 0.39 kg 10 pc 388640 2.8 kn 0.17 kg 25 pc 388639 2.8 kn 0.07 kg 50 pc 388635 4.8 kn 0.43 kg 10 pc 388641 4.8 kn 0.6 kg 10 pc 388642 6.3 kn 0.95 kg 5 pc 388643 8.5 kn 1.73 kg 5 pc 388644 9 kn 2.5 kg 2 pc 388645 16.5 kn 4.5 kg 2 pc 388646 16.5 kn 5 kg 2 pc 388647 Systems 509

Hot-Dip Galvanized Parts Editorial Page Editorial Full Page 09 System MQ/MC Channel Hot Dipped Galvanized Hilti. Outperform. Outlast. 510

Hot-Dip Galvanized Parts channel MQ-21 HDG ASTM Pipework Air ducts Cable trays S235JR - DIN EN 10025 Hot-dip galvanized, 65 µm - ASTM A123 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21 6m HDG 21 mm 6 m 2 mm 1480 g RAL-GZ 655-C 6 m 288388 ASTM channel MQ-41 HDG ASTM Pipework Air ducts Cable trays S235JR - DIN EN 10025 Hot-dip galvanized, 65 µm - ASTM A123 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41 6m HDG ASTM 41 mm 6 m 2 mm 2130 g RAL-GZ 655-C 6 m 288386 channel MQ-52 HDG ASTM Pipework Air ducts Cable trays S235JR - DIN EN 10025 Hot-dip galvanized, 65 µm - ASTM A123 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-52 6m HDG ASTM 52 mm 6 m 2.5 mm 3010 g RAL-GZ 655-C 6 m 430799 Systems 511

Hot-Dip Galvanized Parts channel MQ-72 HDG ASTM Pipework Air ducts Cable trays S235JR - DIN EN 10025 Hot-dip galvanized, 65 µm - ASTM A123 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-72 6m HDG ASTM 72 mm 6 m 2.75 mm 4200 g RAL-GZ 655-C 6 m 430804 channel MQ-21-HDG plus Pipework Air ducts Cable trays S235JR - DIN EN 10025 Continuous hot-dip galvanized, approx. 70 µm - DIN EN 10326 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21-HDG plus 6m 21 mm 6 m 2 mm 1480 g RAL-GZ 655-C 6 m 304098 channel MQ-31-HDG plus Pipe work Air ducts Cable trays S235JR - DIN EN 10025 Continuous hot-dip galvanized, approx. 70 µm - DIN EN 10326 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-31-HDG plus 6m 31 mm 6 m 2 mm 1760 g RAL-GZ 655-C 6 m 284530 512

Hot-Dip Galvanized Parts channel MQ-41-HDG plus Pipework Air ducts Cable trays S235JR - DIN EN 10025 Continuous hot-dip galvanized, approx. 70 µm - DIN EN 10326 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41-HDG plus 6m 41 mm 6 m 2 mm 2130 g RAL-GZ 655-C 6 m 304101 channel MQ-21 D-HDG plus Pipework Air ducts Cable trays S235JR - DIN EN 10025 Continuous hot-dip galvanized, approx. 70 µm - DIN EN 10326 C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21-D-HDG plus 41 mm 6 m 2 mm 2980 g RAL-GZ 655-C 6 m 284385 6m Hot-dip galvanized double installation channel (HDG plus) MQ-41 D-HDG plus Pipework Air ducts Cable trays S235JR - DIN EN 10025 Continuous hot-dip galvanized, approx. 70 µm - DIN EN 10326 C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41 D-HDG plus 6m 83 mm 6 m 2 mm 4290 g RAL-GZ 655-C 6 m 304111 Systems 513

Hot-Dip Galvanized Parts Hot-dip galvanized installation channel MQ-21-F Pipework Air ducts Cable trays S235JR - DIN EN 10025 Hot-dip galvanized, 45 µm - DIN EN ISO 1461 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21-F 6m 21 mm 6 m 2 mm 1480 g RAL-GZ 655-C 6 m 304097 Hot-dip galvanized installation channel MQ-41-F Pipework Air ducts Cable trays S235JR - DIN EN 10025 Hot-dip galvanized, 45 µm - DIN EN ISO 1461 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41-F 6m 41 mm 6 m 2 mm 2130 g RAL-GZ 655-C 6 m 304100 Hot-dip galvanized installation channel MQ-52-F Pipework Air ducts Cable trays S235JR - DIN EN 10025 Hot-dip galvanized, 45 µm - DIN EN ISO 1461 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-52-F 6m 52 mm 6 m 2.5 mm 3010 g RAL-GZ 655-C 6 m 304103 514

Hot-Dip Galvanized Parts Hot-dip galvanized installation channel MQ-72-F Pipework Air ducts Cable trays S235JR - DIN EN 10025 Hot-dip galvanized, 45 µm - DIN EN ISO 1461 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-72-F 6m 72 mm 6 m 2.75 mm 4200 g RAL-GZ 655-C 6 m 304105 Hot-dip galvanized installation channel MQ-21 D-F Pipework Air ducts Cable trays S250GD - DIN EN 10346 Hot-dip galvanized, 45 µm - DIN EN ISO 1461 C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21 D-F 6m 41 mm 6 m 2 mm 2970 g RAL-GZ 655-C 6 m 304108 Hot-dip galvanized installation channel MQ-41 D-F Pipework Air ducts Cable trays S250GD - DIN EN 10346 Hot-dip galvanized, 45 µm - DIN EN ISO 1461 C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41 D-F 6m 83 mm 6 m 2 mm 4290 g RAL-GZ 655-C 6 m 304110 Systems 515

Hot-Dip Galvanized Parts Hot-dip galvanized double installation channel MQ-52-72 D-F Pipework Air ducts Cable trays S250GD - DIN EN 10346 Hot-dip galvanized, 45 µm - DIN EN ISO 1461 C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-52-72 D-F 6m 124 mm 6 m 2.5 mm, 2.75 mm 7260 g RAL-GZ 655-C 6 m 304112 Hot-dip galvanized bracket MQK-21-F For stand-alone use on ceilings, walls and floors or in conjunction with channel systems For the installation of cable trays, air ducts and pipe supports Serrated C-section Pre-marked dimensions make installation, assembly and measurement easy Great flexibility and easy alignment S235JR - DIN EN 10025 Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Profile Length - L Material thickness Weight Sales pack Item number MQK-21/300-F MQ-21-F 300 mm Channel: 2 mm, Baseplate: 6 mm 670 g 10 pc 304113 MQK-21/450-F MQ-21-F 450 mm Channel: 2 mm, Baseplate: 6 mm 890 g 10 pc 304114 Hot-dip galvanized bracket MQK-41-F Stand-alone use on ceilings, walls and floors or combined with channel systems For the installation of cable trays, air ducts and pipe supports Serrated C-section Pre-marked dimensions make installation, assembly and measurement easy Great flexibility and easy alignment S235JR - DIN EN 10025 Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Profile Length - L Material thickness Weight Approvals Sales pack Item number MQK-41/300-F MQ-41-F 300 mm Channel: 2 mm, Baseplate: 8 mm 950 g Fire resistance test IBMB 3646/261/07 10 pc 304115 516

Hot-Dip Galvanized Parts Hot-dip galvanized bracket MQK-72-F Stand-alone use on ceilings, walls and floors or combined with channel systems For the installation of cable trays, air ducts and pipe supports Serrated C-section Pre-marked dimensions make installation, assembly and measurement easy Great flexibility and easy alignment S235JR - DIN EN 10025 Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Profile Length - L Material thickness Weight Approvals Sales pack MQK-72/450-F MQ-72-F 450 mm Channel: 2.75 mm, Baseplate: 10 mm 2510 g Fire resistance test IBMB 3646/261/07 Item number 6 pc 304122 MQK-72/600-F MQ-72-F 600 mm Channel: 2.75 mm, Baseplate: 10 mm 3130 g Fire resistance test IBMB 3646/261/07 6 pc 304123 Hot-dip galvanized angle brace MQK-S-F Recommended for fabricating wall brackets with individual stand-off lengths Increases the loadbearing capacity of brackets Easily customized stand-alone structures Channel assembly in two positions is possible For making your own brackets S235JR - DIN EN 10025 Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Height - H Length - L a Material thickness Weight Sales pack Item number MQK-SK-F 328 mm 324 mm 355 mm 3 mm 650 g 10 pc 304129 MQK-SL-F 528 mm 524 mm 635 mm 3 mm 1060 g 10 pc 304128 Systems 517

Hot-Dip Galvanized Parts Channel connector HDG plus MQN-HDG plus Recommended for connecting angles to channels One-piece component for connecting channels and structural elements Simple, compact, time-saving Provides a secure hold once pressed in, turned and tightened Universal: one pushbutton for all connectors and MQ installation channels Bolt: grade 8.8 - DIN EN ISO 898, Nut: C4C - DIN EN 10263, Plate: DD11 - DIN EN 10111 Multi-layer coating performance in salt spray test equal to hot-dip galvanizing Approvals Fire resistance test IBMB 3646/261/07 Additional product information Coating designed for corrosion environment category C3 according to EN ISO 9223 Ordering designation Wrench size Approvals Tightening torque Weight Sales pack Item number MQN-HDG plus 17 mm Fire resistance test IBMB 3646/261/07 40 Nm 66 g 50 pc 387779 Wing nut MQM-DG plus Simple part for connecting channels to parts of structures Simple, compact, time-saving Flush design of channel wing nut Easy disassembly Additional product information Wings: plastic PA, Nut: QStE 380 TM, SEW 92 Multi-layer coating Coating designed for corrosion environment category C3 according to EN ISO 9223 Ordering designation Thread - M Tightening torque Weight Sales pack Item number MQM-M6 HDG plus M6 10 Nm 23 g 50 pc 298499 MQM-M8 HDG plus M8 20 Nm 23 g 50 pc 298500 MQM-M10 HDG plus M10 40 Nm 22 g 50 pc 298510 518

Hot-Dip Galvanized Parts Hot-dip galvanized wing nut MQM-F Simple part for connecting channels to parts of structures Simple, compact and time-saving Flush design of channel wing nut Easy disassembly Wings: plastic PA, Nut: C4C - DIN EN 10263 Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Thread - M Tightening torque Weight Sales pack Item number MQM-M12-F M12 40 Nm 36 g 25 pc 304134 Hot-dip galvanized pipe ring saddle MQA-F Various suspensions with threaded rods Pipe ring saddle for pipe installation For metric threads One-piece, time-saving and easy to handle Only one type of saddle nut for all MQ channels Easy alignment in the right position Nut: EN-GJMW-450-7 - DIN EN 1562, Plate: S235JR - DIN EN 10025, Plastic: PB Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Thread - M Approvals Tightening torque Weight Sales pack Item number MQA-M8-F M8 9 Nm 75 g 25 pc 304138 MQA-M10-F M10 Fire resistance test IBMB 3646/261/07 18 Nm 73 g 25 pc 304139 MQA-M12-F M12 Fire resistance test IBMB 3646/261/07 31 Nm 71 g 25 pc 304140 MQA-M16-F M16 Fire resistance test IBMB 3646/261/07 40 Nm 82 g 25 pc 304141 Hot-dip galvanized angle MQW 90 -F Assembly of frames as well as other assemblies Quick installation Suitability for universal use results in fewer parts for a variety of applications Easy to handle S235JR - DIN EN 10025 Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Systems 519

Hot-Dip Galvanized Parts Ordering designation Angle Weight Sales pack Item number MQW-2-F 90 110 g 20 pc 304171 MQW-P2-F 90 160 g 10 pc 304177 MQW-3-F 90 160 g 20 pc 304172 MQW-4-F 90 220 g 10 pc 304174 MQW-8/90-F 90 420 g 10 pc 304175 Hot-dip galvanized angle MQW 45 /135 -F Assembly of frames and structures Connection of channels Quick installation Universal: only a few parts required for many different applications S235JR - DIN EN 10025 Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Angle Weight Sales pack Item number MQW-3/45-F 45 155 g 20 pc 304173 MQW-2/45-F 45 354 g 10 pc 304178 MQW-8/45-F 45 410 g 10 pc 304176 520

Hot-Dip Galvanized Parts Hot-dip galvanized angle bracket MQW-S-F Assembly of frames and structures Connection of channels For fastening to walls, floors and ceilings Quick installation Universal: few parts for all applications S235JR - DIN EN 10025 Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Angle Weight Sales pack Item number MQW-S/1-F 90 460 g 10 pc 304180 MQW-S/2-F 90 1180 g 10 pc 304181 Connector 2-D HDG MQV-2D-F For clever single-plane channel design Universal: few parts for various applications Easy to use S235JR - DIN EN 10025 Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Angle Weight Sales pack Item number MQV-2/2 D-F 90 446 g 10 pc 304150 MQV-3/2 D-F 90 602 g 10 pc 304152 Hot-dip galvanized 3-D connector MQV-3D-F For clever 3D channel design Universal: few parts for various applications Easy to use Three dimensional S235JR - DIN EN 10025 Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Angle Weight Sales pack Item number MQV-3/3 D-F 90 451 g 10 pc 304153 Systems 521

Hot-Dip Galvanized Parts Ordering designation Angle Weight Sales pack Item number MQV-4/3 D-F 90 770 g 10 pc 304154 Hot-dip galavanized longitudinal connector MQV-F Connecting two MQ channels together Quick extension of installation channels Easy to handle S235JR - DIN EN 10025 Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Weight Sales pack Item number MQV-12-F 583 g 10 pc 304155 Hot-dip galavanized longitudinal connector MQV-F For connecting two MQ channels together Simple extension of channel length The MQN-F pushbutton can be prefitted Easy to handle S235JR - DIN EN 10025 Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Weight Sales pack Item number MQV-P4-F 188 g 10 pc 304156 Hot-dip galvanized flat connector MQV-T-F For clever single-plane channel design Universal: few parts for various applications Easy to use S235JR - DIN EN 10025 Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Weight Sales pack Item number MQV-T-F 196 g 10 pc 304157 Hot-dip galvanized rail support MQV 2/2 D-F Connection of channels to any supporting material High application flexibility Reliable and easy to use S235JR - DIN EN 10025 Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm 522

Hot-Dip Galvanized Parts Ordering designation Weight Sales pack Item number MQV-2/2 D-14-F 451 g 10 pc 304151 Hot-dip galvanized rail support MQP-1-F Connection of channels to any supporting material High application flexibility Reliable and easy to use S235JR - DIN EN 10025 Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Weight Sales pack Item number MQP-1/1-F 110 g 20 pc 304161 MQP-1/3-F 190 g 20 pc 304162 Hot-dip galvanized rail support MQP-F Connection of channels to any supporting material High application flexibility Reliable and easy to use Pre-assembly of the MQN HDG plus pushbutton is possible S235JR - DIN EN 10025 Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Weight Approvals Sales pack Item number MQP-21-72-F 1150 g Fire resistance test IBMB 3646/261/07 12 pc 304165 MQP-82-F 1880 g 8 pc 304166 MQP-124-F 2730 g 6 pc 304167 Hot-dip galvanized rail support MQP-G-F For constructing channel structures for attachment to almost any supporting materials For connecting structures to inclined surfaces Channel connection on rotatable base High application flexibility Easy to attach to walls, ceilings, floors with anchors S235JR - DIN EN 10025 Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Systems 523

Hot-Dip Galvanized Parts Ordering designation Weight Sales pack Item number MQP-G-F 1055 g 10 pc 304168 Hot-dip galvanized beam clamp MQT-F For fastening MQ channels to steel beams without drilling or welding (use only in pairs!) No drilling or welding neccessary Versatile, no small parts to lose The attachment fits all standard beams (max. clamping thickness = 23 mm) U-bolt: S235JRG2 - DIN EN 10025 Additional product information Hot-dip galvanized, 56 µm - ASTM A153 Beam clamps always to be used in pairs Ordering designation Thread - M Wrench size Tightening torque Weight Sales pack Item number MQT-21-41-F M8 13 mm 10 Nm 500 g 10 pc 304190 MQT-41-82-F M10 17 mm 20 Nm 650 g 10 pc 304191 Clamp (channel to channel) HDG MQB-F Channel cross connection Universal: few parts for all applications Suitable for various MQ channel profiles Easy to handle thanks to pushbutton connectors S235JR - DIN EN 10025 Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Weight Sales pack Item number MQB-41-F 243 g 10 pc 304183 MQB-41x2-F 295 g 10 pc 304188 MQB-124-F 553 g 10 pc 304187 Hot-dip galvanized drilled plate MQZ-L-F For fastening metric threaded parts to MQ channel Matching items in program Suitable for MQ installation channels and brackets S235JR - DIN EN 10025 Hot-dip galvanized, 56 µm - ASTM A153 524

Hot-Dip Galvanized Parts Ordering designation Hole diameter - D Weight Approvals Sales pack Item number MQZ-L9-F 9.5 mm 92 g 20 pc 304196 MQZ-L11-F 11.5 mm 88 g Fire resistance test IBMB 3646/261/07 20 pc 304197 MQZ-L13-F 13.5 mm 84 g Fire resistance test IBMB 3646/261/07 20 pc 304198 MQZ-L17-F 17.5 mm 80 g Fire resistance test IBMB 3646/261/07 20 pc 304199 Hot-dip galvanized 3D-System MQ3D-F Assembly of 3-D structures on site Bracing and stiffening of complex fastening solutions Designing three-dimensional support frames Universal: few parts for all applications Quick and easy to use 45 angle and bracing with predetermined bending point Material thickness Hot-dip galvanized, 56 µm - ASTM A153 3 mm Ordering designation Angle Thread - M Wrench size Tightening torque Weight Sales pack Item number MQ3D-W45-F 45 M10 17 mm 40 Nm 131 g 16 pc 304211 MQ3D-A-F 45 M10 17 mm 40 Nm 75 g 20 pc 304212 Systems 525

Hot-Dip Galvanized Parts Overview ystem MC Hot Dipped Galvanized Channels Brackets Longitudinal connector End cap MC-3D-41 OC-A 3m 2063297 MC-3D-41 OC-A 6m 2063296 MC-72 OC-A 6m 2063299 MC-B-3D-41/350 OC-A 2063720 MC-BE-320 OC-A 2063729 MC-B-3D-41/450 OC-A 2063721 MC-BE-630 OC-A 2063730 MC-B-3D-41/650 OC-A 2063722 MC-B-3D-41/1000 OC-A 2063723 MC-CL OC-A 2063760 MQZ-E31 369686 MQZ-E41 369685 Base Connector Channel Connectors Angles MC-CB OC-A 2061833 MC-CH OC-A 2063281 MC-CU OC-A 2063762 MC-A-90 OC-A 2063770 MC-AH-90 OC-A 2063733 MC-AF-90 OC-A 2063740 Wing nuts Channel screws Channel stiffener Channel plate MC-WN-M10 OC 2063742 MC-WN-3D OC 2063735 MC-SI-M10 OC-A 2063739 MC-S-M10 OC-A 2063737 MC-PI OC-A 2063718 MC-PU OC-A 2063224 Accessories MC-MI connector MI accessories M10x20-F 2063241 M10x65-F 2063242 M12x105-F 2063244 M10-SL-F 2063245 M12-F-SL-WS 3/4 382897 A10.5/28-F 2063247 MC-MI-AH-90 OC-A 2063283 MIA-EH90 304887 MIA-EH-P 304891 526

Hot-Dip Galvanized Parts channel HDG MC-3D-41 OC-A Cable tray supports outdoors Integrated floor supports Instrumentation supports outdoors Connectivity from all channel sides High flexibility in terms of fastening type and direction Dimension marks for easy cutting and installation Structural steel with a minimum yield strength of 275 N/mm2 Hot-dip galvanized, 65 µm - ASTM A123 Ordering designation Height Length Material thickness Weight per metre length Sales pack Item number MC-3D-41 OC-A 3m 41 mm 3 m 1.6 mm 1713 g 3 m 2063297 MC-3D-41 OC-A 6m 41 mm 6 m 1.6 mm 1713 g 6 m 2063296 channel HDG MC-72 OC-A Cable tray supports outdoors Integrated floor supports Instrumentation supports outdoors Serrated C-section profile High load capacity Dimension marks for easy cutting and installation Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 65 µm - ASTM A123 Ordering designation Height Length Material thickness Weight per metre length Sales pack Item number MC-72 OC-A 6m 72 mm 6 m 2.75 mm 4108 g 6 m 2063299 Systems 527

Hot-Dip Galvanized Parts Bracket HDG MC-B-3D-41 OC-A Cable tray supports outdoors Instrumentation supports outdoors Integrated floor supports Connectivity from all channel sides High flexibility Serrated C-section profile Structural steel with a minimum yield strength of 275 N/mm2 for the channel, 355 N/mm2 for the plate Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Profile Length - L Material thickness Weight Sales pack Item number MC-B-3D-41/350 OC-A MC-3D-41 350 mm 1.6 mm 1033 g 12 pc 2063720 MC-B-3D-41/450 OC-A MC-3D-41 450 mm 1.6 mm 1242 g 12 pc 2063721 MC-B-3D-41/650 OC-A MC-3D-41 650 mm 1.6 mm 1508 g 12 pc 2063722 MC-B-3D-41/1000 OC-A MC-3D-41 1000 mm 1.6 mm 2150 g 12 pc 2063723 Electrical bracket HDG MC-BE OC-A Cable tray supports outdoors Easy to install Various fastening options High load performance Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Height - H Length - L a Material thickness Weight Sales pack Item number MC-BE-320 OC-A 97 mm 322 mm 50 mm 1.5 mm 557 g 12 pc 2063729 MC-BE-630 OC-A 147 mm 632 mm 100 mm 1.5 mm 1138 g 12 pc 2063730 528

Hot-Dip Galvanized Parts Longitudinal channel connector HDG MC-CL OC-A Longitudinal connector for MC channels Easy to use on the open side or back of the channel Compatible with all MC channels High load capacity Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Weight Sales pack Item number MC-CL OC-A 708 g 20 pc 2063760 Systems 529

Hot-Dip Galvanized Parts Base connector HDG MC-CB OC-A Connection of MC channels to concrete Fastening to floors, ceilings or walls Various, easy installation options Height adjustment High load capacity Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Weight Sales pack Item number MC-CB OC-A 925 g 12 pc 2061833 Angle HDG MC-A-90 OC-A Connection of MC channels at 90 degrees Assembly of two and three-dimensional modular system structures Various, easy installation options Can be fitted regardless of the direction in which the open side of the channel is facing High load capacity Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 4 mm 530

Hot-Dip Galvanized Parts Ordering designation Angle Weight Sales pack Item number MC-A-90 OC-A 90 324 g 10 pc 2063770 Height-adjustable angle HDG MC-AH-90 OC-A Connection of MC channels at 90 degrees Assembly of two and three-dimensional modular system structures High application flexibility Easy height adjustment along the full channel length and on all channel sides High shear load capacity Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Angle Weight Sales pack Item number MC-AH-90 OC-A 90 174 g 20 pc 2063733 Systems 531

Hot-Dip Galvanized Parts Height-adjustable angle HDG MC-MI-AH-90 OC-A Connection of MC channels to Hilti MI channels at 90 degrees Easy to use Easy height adjustment Strong and cost-efficient connection to the Hilti MI system Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Angle Weight Sales pack Item number MC-MI-AH-90 OC-A 90 223 g 10 pc 2063283 Flat angle HDG MC-AF-90 OC-A Connection of MC channels at 90 degrees Various, easy installation options High application flexibility Strong and cost-efficient connection Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 4 mm 532

Hot-Dip Galvanized Parts Ordering designation Angle Weight Sales pack Item number MC-AF-90 OC-A 90 128 g 20 pc 2063740 Height-adjustable connector HDG MC-CH OC-A Cross-connector for MC channels Three-dimensional structures such as integrated floor supports Easy to install Height adjustment High load capacity Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Weight Sales pack Item number MC-CH OC-A 710 g 20 pc 2063281 Universal connector HDG MC-CU OC-A Connection of MC-3D channel to Hilti MC and MI installation channels Connection of MC-3D channel to concrete Bracing for modular system structures Various, easy installation options High flexibility in terms of fastening type and direction Multiple function as channel and base connector Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 4 mm Systems 533

Hot-Dip Galvanized Parts Ordering designation Weight Sales pack Item number MC-CU OC-A 338 g 12 pc 2063762 Wing nut MC-WN-M10 OC Fastening bolts and threaded rods at the open side of MC channel Fastening connectors at the open side of MC channel, anywhere along its length QStE 380 TM - SEW 092 Multi-layer coating, designed for corrosion environment category C3 according to ISO 9223 Easy-to-use single part For universal use with all channel sizes Reusable Ordering designation Thread - M Tightening torque Weight Sales pack Item number MC-WN-M10 OC M10 40 Nm 22 g 50 pc 2063742 Wing nut MC-WN-3D OC Fastening bolts and threaded rods at any side of MC-3D channel Fastening connectors at any side of MC-3D channel Assembly of two and three-dimensional modular system structures QStE 380 TM - SEW 092 Multi-layer coating, designed for corrosion environment category C3 according to ISO 9223 High application flexibility Easy-to-use single part Allows connection from all sides of MC-3D channel 534

Hot-Dip Galvanized Parts Ordering designation Thread - M Tightening torque Weight Sales pack Item number MC-WN-3D OC M10 40 Nm 41 g 20 pc 2063735 Universal plate HDG MC-PU OC-A Load distribution plate for use where bolts and threaded rods are fitted through MC channel Various, easy installation options Can be fitted on all sides of MC-3D channel Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Material thickness Hole diameter - D Weight Sales pack Item number MC-PU OC-A 4 mm 13.5 mm 53 g 100 pc 2063224 Channel insert screw MC-SI-M10 OC-A Assembly of two and three-dimensional modular system structures Fitting connectors to the back or side of MC-3D channel Steel grade 8.8 Hot-dip galvanized, 56 µm - ASTM A153 Strong and cost-efficient connection High application flexibility Can be fitted at the back or side of MC-3D channel Ordering designation Thread - M Weight Sales pack Item number MC-SI-M10 OC-A M10 17 g 100 pc 2063739 Systems 535

Hot-Dip Galvanized Parts Channel connection screw MC-S-M10 OC-A Assembly of two and three-dimensional modular system structures Fitting connectors to the back of MC channels Strong and cost-efficient connection High application flexibility Fits at the back of MC channels Steel grade 8.8 Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Thread - M Weight Sales pack Item number MC-S-M10 OC-A M10 47 g 100 pc 2063737 536

Hot-Dip Galvanized Parts Channel stiffener insert MC-PI OC-A Channel stiffening insert for use where bolts and threaded rods are fitted through MC channels Easy-to-use single part Surface level with channel after installation Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Weight Sales pack Item number MC-PI OC-A 20 g 50 pc 2063718 Hot-dip galvanized threaded rod AM Steel grade 4.8 Hot-dip galvanized Ordering designation Thread - M Length - L Sales pack Item number AM10x1000-F 4.8 M10 1000 mm 20 pc 304773 AM10x2000-F 4.8 M10 2000 mm 20 pc 414784 AM12x1000-F 4.8 M12 1000 mm 15 pc 304774 AM12x2000-F 4.8 M12 2000 mm 15 pc 304775 AM16x1000-F 4.8 M16 1000 mm 5 pc 304776 AM16x2000-F 4.8 M16 2000 mm 5 pc 304777 AM20x1000-F 4.8 M20 1000 mm 5 pc 304778 AM20x2000-F 4.8 M20 2000 mm 5 pc 304779 Hot-dip galvanized flat washer DIN 125 Steel Hot-dip galvanized Ordering designation Inside diameter - DI Outside diameter - DA Cross section thickness - s Sales pack Item number A 8,4/16-F 8.4 mm 16 mm 1.6 mm 100 pc 304769 A 10,5/20-F 10.5 mm 20 mm 2 mm 100 pc 304770 A 13/24-F 13 mm 24 mm 2.5 mm 100 pc 304771 A 17/30-F 17 mm 30 mm 3 mm 100 pc 304772 Systems 537

Hot-Dip Galvanized Parts Flat washer similar to DIN 125 (HDG) Steel grade 8 Hot-dip galvanized Ordering designation Inside diameter - DI Outside diameter - DA Cross section thickness - s Weight Sales pack Item number A 10,5/28-F 10.5 mm 28 mm 2 mm 8 g 100 pc 2063247 Hot-dip galvanized hexagon nut Steel grade 8 Hot-dip galvanized - DIN EN ISO 10684 Ordering designation Thread - M Height - H Wrench size - W Sales pack Item number M8-F M8 7 mm 13 mm 100 pc 304764 M10-F M10 8 mm 17 mm 100 pc 304765 M12-F M12 10 mm 19 mm 100 pc 304766 M16-F M16 13 mm 24 mm 50 pc 304767 M20-F M20 16 mm 30 mm 50 pc 304768 Prevailing torque hexagon nut HDG Steel grade 8 Hot-dip galvanized Ordering designation Tightening torque Weight Sales pack Item number M10-SL-F 40 Nm 15 g 100 pc 2063245 538

Hot-Dip Galvanized Parts Hot-dip galvanized hexagon bolt Steel grade 8.8 Hot-dip galvanized Ordering designation Thread - M Thread length - L Height - H Wrench size - W Sales pack Item number M8x25-F M8 25 mm 5 mm 13 mm 100 pc 304787 M10x20-F M10 20 mm 6 mm 17 mm 100 pc 2063241 M10x25-F M10 25 mm 6 mm 17 mm 100 pc 304788 M12x25-F M12 25 mm 8 mm 19 mm 50 pc 304789 M12x30-F M12 30 mm 8 mm 19 mm 50 pc 284387 M16x30-F M16 30 mm 10 mm 24 mm 25 pc 304790 Hexagon screw DIN 931 HDG Steel grade 8.8 Hot-dip galvanized Ordering designation Thread - M Thread length - L a Height - H Wrench size - W Weight Sales pack Item number M10x65-F M10 27 mm 65 mm 6 mm 17 mm 45 g 100 pc 2063242 M12x105-F M12 32 mm 105 mm 7 mm 19 mm 105 g 50 pc 2063244 Hot-dip galvanized spacer coupling Steel grade 4.6 Hot-dip galvanized Ordering designation Thread - M Length - L Diameter - D Sales pack Item number M8x25-F M8 25 mm 11 mm 50 pc 304791 M10x30-F M10 30 mm 13 mm 50 pc 304792 M12x40-F M12 40 mm 15 mm 50 pc 304793 M16x50-F M16 50 mm 20 mm 20 pc 304794 Systems 539

Stainless Steel Parts System MQ Channel Stainless Steel Hilti. Outperform. Outlast. 540

Stainless Steel Parts channel (A2 stainless steel) MQ-21-RA2 Recommended for installation in industrial atmospheres or areas with heavy condensation Pipework Air ducts C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Stainless steel, 1.4301 (A2) - EN 10088 Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21-RA2 6m 21 mm 6 m 2 mm 1450 g RAL-GZ 655-C 6 m 303991 channel (A2 stainless steel) MQ-41-RA2 Recommended for installation in industrial atmospheres or areas with heavy condensation Pipework Air ducts C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Stainless steel, 1.4301 (A2) - EN 10088 Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41-RA2 6m 41 mm 6 m 2 mm 2090 g RAL-GZ 655-C 6 m 303995 channel (A4 stainless steel) MQ-21-R Recommended for installation in industrial atmospheres or areas with heavy condensation Pipework Air ducts C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Stainless steel, 1.4404 (A4) EN 10088, AISI 316L Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21-R 6m 21 mm 6 m 2 mm 1470 g RAL-GZ 655-C 6 m 303989 Systems 541

Stainless Steel Parts channel (A4 stainless steel) MQ-41-R Recommended for installation in industrial atmospheres or areas with heavy condensation Pipework Air ducts C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Stainless steel, 1.4404 (A4) EN 10088, AISI 316L Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41-R 6m 41 mm 6 m 2 mm 2120 g RAL-GZ 655-C 6 m 303993 channel (A4 stainless steel) MQ-52-R Recommended for installation in industrial atmospheres or areas with heavy condensation Pipework Air ducts C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Stainless steel, 1.4404 (A4) EN 10088, AISI 316L Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-52-R 6m 52 mm 6 m 2.5 mm 3000 g RAL-GZ 655-C 6 m 303997 channel (A4 stainless steel) MQ-21 D-R Recommended for installation in industrial atmospheres or areas with heavy condensation Pipework Air ducts C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Stainless steel, 1.4404 (A4) EN 10088, AISI 316L Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21 D-R 6m 41 mm 6 m 2 mm 2960 g RAL-GZ 655-C 6 m 303999 542

Stainless Steel Parts channel (A4 stainless steel) MQ-41 D-R Recommended for installation in industrial atmospheres or areas with heavy condensation Pipework Air ducts C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Stainless steel, 1.4404 (A4) EN 10088, AISI 316L Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41D-R 6m 83 mm 6 m 2 mm 4275 g RAL-GZ 655-C 6 m 304003 Bracket (A4 stainless steel) MQK-41-R For the installation of cable trays, air ducts and pipe supports For installation in industrial atmospheres or areas with high condensation Serrated C-section Pre-marked dimensions make installation, assembly and measurement easy Great flexibility and easy alignment Stainless steel, 1.4404 (A4) EN 10088, AISI 316L Ordering designation Profile Length - L Material thickness Weight Approvals Sales pack Item number MQK-41/300-R MQ-41-R 300 mm Channel: 2 mm, Baseplate: 8 mm 950 g Fire resistance test IBMB 3646/261/07 10 pc 304005 MQK-41/450-R MQ-41-R 450 mm Channel: 2 mm, Baseplate: 8 mm 1260 g Fire resistance test IBMB 3646/261/07 10 pc 304006 MQK-41/600-R MQ-41-R 600 mm Channel: 2 mm, Baseplate: 8 mm 1570 g Fire resistance test IBMB 3646/261/07 8 pc 304007 Systems 543

Stainless Steel Parts Channel connector (A4 stainless steel) MQN-R One-piece component for connecting channels and structural elements Universal: one and the same nut for all channels Holds securely once pushed in, turned and tightened Fewer parts and high flexibility Screw: A4-70 - DIN ISO 3506-1, Nut: 1.4581 (A4) - DIN EN 10283, Plate: 1.4404 (A4) EN 10088, AISI 316L Approvals Fire resistance test IBMB 3646/261/07 Ordering designation Thread - M Wrench size Approvals Tightening torque Weight Sales pack Item number MQN-R M10 17 mm Fire resistance test IBMB 3646/261/07 40 Nm 77 g 25 pc 304012 Wing nut (A4 stainless steel) MQM-R Simple part for connecting channels with structural elements For direct connection to channels In-plane connection to channel possible Allows use in shallow, standard and deep channel profiles Nut: 1.4581 (A4) - DIN EN 10283, Wings: plastic PA Ordering designation Thread - M Tightening torque Weight Sales pack Item number MQM-M6-R M6 10 Nm 29 g 25 pc 304014 MQM-M8-R M8 20 Nm 27 g 25 pc 304015 MQM-M10-R M10 40 Nm 25 g 25 pc 304016 MQM-M12-R M12 40 Nm 23 g 25 pc 304017 544

Stainless Steel Parts Pipe ring saddle (A4 stainless steel) MQA-R Various suspensions with threaded rods Pipe ring saddle for pipe installation One-piece design Easy to use, time-saving Only one type of saddle nut for all MQ channels Nut: 1.4581 (A4) - DIN EN 10283, Plate: 1.4404 (A4) EN 10088, AISI 316L, Plastic: PB Ordering designation Thread - M Approvals Tightening torque Weight Sales pack Item number MQA-M8-R M8 9 Nm 75 g 25 pc 304021 MQA-M10-R M10 Fire resistance test IBMB 3646/261/07 18 Nm 73 g 25 pc 304022 MQA-M12-R M12 Fire resistance test IBMB 3646/261/07 31 Nm 71 g 25 pc 304023 MQA-M16-R M16 Fire resistance test IBMB 3646/261/07 40 Nm 84 g 25 pc 304024 Angle (A4 stainless steel) MQW 90 -R Assembly of frames and structures Connection of channels Quick installation Only few parts required for any application Easy to handle Material thickness Stainless steel, 1.4404 (A4) EN 10088, AISI 316L 4 mm Ordering designation Angle Weight Sales pack Item number MQW-2-R 90 110 g 10 pc 304051 MQW-3-R 90 160 g 10 pc 304052 MQW-4-R 90 220 g 10 pc 304054 Angle (A4 stainless steel) MQW 45 /135 -R Assembly of frames and structures Connection of channels Quick installation Only few parts required for any application Material thickness Stainless steel, 1.4404 (A4) EN 10088, AISI 316L 4 mm Systems 545

Stainless Steel Parts Ordering designation Angle Weight Sales pack Item number MQW-3/45-R 45 155 g 20 pc 304053 MQW-8/45-R 45 410 g 10 pc 304056 Connector 2-D (A4 stainless steel) MQV-2D-R For clever single-plane channel design Universal: few parts for various applications Easy to use Material thickness Stainless steel, 1.4404 (A4) EN 10088, AISI 316L 4 mm Ordering designation Weight Sales pack Item number MQV-2/2 D-R 440 g 10 pc 304032 MQV-3/2 D-R 602 g 10 pc 304034 Rail support (A4 stainless steel) MQV-R Connection of channels to any supporting material High application flexibility Reliable and easy to use Material thickness Stainless steel, 1.4404 (A4) EN 10088, AISI 316L 4 mm Ordering designation Tightening torque Weight Sales pack Item number MQV-2/2 D-14-R 40 Nm 440 g 10 pc 304033 Rail support (A4 stainless steel) MQP-R Connection of channels to any supporting material High application flexibility Reliable and easy to use Stainless steel, 1.4404 (A4) EN 10088, AISI 316L Ordering designation Weight Approvals Sales pack Item number MQP-21-72-R 1150 g Fire resistance test IBMB 3646/261/07 12 pc 304047 546

Stainless Steel Parts Ordering designation Weight Approvals Sales pack Item number MQP-82-R 1880 g 8 pc 304048 Beam clamp (A4 stainless steel) MQT-R For fastening MQ channels to steel beams without drilling or welding (use only in pairs!) No drilling or welding neccessary Completely pre-assembled and suits all standard T-beams (max. clamping thickness 23 mm) Material thickness Additional product information Stainless steel, 1.4404 (A4) EN 10088, AISI 316L, Nut: A4-70 - DIN EN ISO 3506-2 6 mm Beam clamps always to be used in pairs Ordering designation Thread - M Wrench size Tightening torque Weight Sales pack Item number MQT-21-41-R M10 17 mm 10 Nm 427 g 10 pc 304067 MQT-52-82-R M10 17 mm 20 Nm 471 g 10 pc 304068 Drilled plate (A4 stainless steel) MQZ-L-R For wall, ceiling or floor attachment of angles, connectors or brackets For fastening metric threaded parts to MQ channel Matches the MQ channel system perfectly Suitable for MQ installation channels and brackets Stainless steel, 1.4404 (A4) EN 10088, AISI 316L Ordering designation Hole diameter - D Weight Approvals Sales pack Item number MQZ-L9-R 9.5 mm 92 g 20 pc 304071 MQZ-L11-R 11.5 mm 88 g Fire resistance test IBMB 3646/261/07 20 pc 304072 MQZ-L13-R 13.5 mm 84 g Fire resistance test IBMB 3646/261/07 20 pc 304073 Threaded rod (A4 stainless steel) AM Stainless steel A4-70 - DIN EN ISO 3506-1 Ordering designation Thread - M Length - L Sales pack Item number AM8x1000 A4-70 M8 1000 mm 10 pc 58666 AM8x2000 A4-70 M8 2000 mm 10 pc 414778 AM10x1000 A4-70 M10 1000 mm 10 pc 58670 Systems 547

Stainless Steel Parts Ordering designation Thread - M Length - L Sales pack Item number AM10x2000 A4-70 M10 2000 mm 10 pc 414779 AM12x1000 A4-70 M12 1000 mm 5 pc 58671 AM12x3000 A4-70 M12 3000 mm 5 pc 58709 AM16x1000 A4-70 M16 1000 mm 5 pc 58683 AM20x1000 A4-70 M20 1000 mm 5 pc 58688 AM24x1000 A4-70 M24 1000 mm 5 pc 58689 Flat washer DIN 125 (A4 stainless steel) Ordering designation Inside diameter - DI Outside diameter - DA Cross section thickness - s Sales pack Item number A 8,4/16 A4 8.4 mm 16 mm 1.6 mm 50 pc 58622 A 10,5/20 A4 10.5 mm 20 mm 2 mm 50 pc 58042 A 13/24 A4 13 mm 24 mm 2.5 mm 50 pc 58041 A 17/30 A4 17 mm 30 mm 3 mm 25 pc 387989 A 21/37 A4 21 mm 37 mm 3 mm 25 pc 387990 A 25/44 A4 25 mm 44 mm 4 mm 25 pc 387991 Hexagon nut (A4 stainless steel) Stainless steel A4-70 Ordering designation Thread - M Height - H Wrench size - W Sales pack Item number M8 A4-70 M8 7 mm 13 mm 50 pc 52460 M10 A4-70 M10 8 mm 17 mm 50 pc 52461 M12 A4-70 M12 10 mm 19 mm 50 pc 52462 M16 A4-70 M16 13 mm 24 mm 25 pc 52463 M20 A4-70 M20 16 mm 30 mm 25 pc 387992 M24 A4-70 M24 19 mm 36 mm 25 pc 387993 Hexagon bolt (A4 stainless steel) Stainless steel A4-70 - DIN EN ISO 3506-1 Ordering designation Thread - M Thread length - L Height - H Wrench size - W Sales pack Item number M8x25 A4-70 M8 25 mm 5 mm 13 mm 50 pc 87637 M10x20 A4-70 M10 20 mm 6 mm 17 mm 50 pc 26839 548

Stainless Steel Parts Ordering designation Thread - M Thread length - L Height - H Wrench size - W Sales pack Item number M10x25 A4-70 M10 25 mm 6 mm 17 mm 50 pc 87632 M12x20 A4-70 M12 20 mm 8 mm 19 mm 50 pc 387988 M12x25 A4-70 M12 25 mm 8 mm 19 mm 50 pc 87634 Spacer coupling, round (A4 stainless steel) Stainless steel A4-70 Ordering designation Thread - M Length - L Diameter - D Sales pack Item number M8x30 A4-70 round M8 30 mm 11 mm 50 pc 266885 M10x30 A4-70 round M10 30 mm 13 mm 25 pc 266884 M12x40 A4-70 round M12 40 mm 15 mm 25 pc 266880 M16x40 A4-70 round M16 40 mm 25 mm 20 pc 266883 Systems 549

Heavy-Duty Supports System MI Industrial Pipe and Electrical Supports Hot Dipped Galvanized Hilti. Outperform. Outlast. 550

Heavy-Duty Supports Girder MI Provides easy-to-install, adjustable, flexible solution for industrial and heavy commercial applications, eliminating the need for welding Modular system for secondary steel structures such as pipe supports, cable tray supports and platforms Fast and efficient installation Hot-dip galvanized, no need to paint Girder with high torsional rigidity DD11 MOD - HN 555, S235JR - EN 10025 Hot-dip galvanized, 75 µm - ASTM A123 Ordering designation Height Length Weight per metre length Sales pack Item number MI-90 6m 90 mm 6 m 9430 g 6 m 304799 MI-120 6m 120 mm 6 m 12600 g 6 m 304801 Connector MIC-U Modular four-part system for supporting cable trays, pipes and miscellaneous secondary steel Provides easy-to-install, adjustable, flexible solutions for industrial and heavy commercial applications, eliminating the need for welding Strong and rigid connection Can be finely adjusted by up to 5 mm Vibration-resistant screw fastenings thanks to self-locking nuts Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461 Additional product information No cantilever possible, Always support on both sides. Systems 551

Heavy-Duty Supports Ordering designation MI girder type Set Weight Wrench size Tightening torque Sales pack Item number MIC-90-U 90 Yes 2.36 kg 19 mm 84 Nm 4 pc 304803 MIC-120-U 120 Yes 2.79 kg 19 mm 84 Nm 4 pc 304804 Connector MIC-L Modular four-part system for supporting cable trays, pipes and miscellaneous secondary steel Provides easy-to-install, adjustable, flexible solutions for industrial and heavy commercial applications, eliminating the need for welding Cantilever connections Strong and rigid connection Can be finely adjusted by up to 5 mm Vibration-resistant screw fastenings thanks to self-locking nuts Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461 552

Heavy-Duty Supports Ordering designation MI girder type Set Weight Wrench size Tightening torque Sales pack Item number MIC-90-L 90 Yes 3.95 kg 19 mm 84 Nm 2 pc 304805 Connector MIC-T Supporting cable trays, pipes and miscellaneous secondary steel (MIC-T forms a safe, four-part system) Industrial and heavy commercial applications requiring an easyto-install, adjustable, flexible solution that eliminates the need for welding Positive engagement for optimum transmission of forces and moments Vibration-resistant screw fastenings thanks to self-locking nuts Rigid extension / connection of MI girders Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461 Additional product information Use in pairs Ordering designation MI girder type Weight Wrench size Tightening torque Sales pack Item number MIC-T 90, 120 2.04 kg 19 mm 84 Nm 2 pc 304807 Systems 553

Heavy-Duty Supports Connector MIC-E Connecting MI girders Fast and efficient installation Positive locking hold for optimum transmission of forces and moments Vibration-resistant screw fastenings thanks to self-locking nuts Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461 Ordering designation MI girder type Weight Wrench size Tightening torque Sales pack Item number MIC-90-E 90 3.57 kg 19 mm 84 Nm 2 pc 304809 MIC-120-E 120 4.35 kg 19 mm 84 Nm 2 pc 304810 554

Heavy-Duty Supports Connector (steel) MIC-S Modular four-part system for supporting cable trays, pipes and miscellaneous secondary steel Provides easy-to-install, adjustable, flexible solutions for industrial and heavy commercial applications Fastening to standard steel beams without drilling or welding Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461 Provides a strong and rigid connection Base plates are designed to cover a large range of standard flange widths Adjustable and flexible for efficient and easy installation Ordering designation MI girder type Steel beam width Weight Width - B X Y Tightening torque Sales pack Item number MIC-S90-AA steel 90 75-165 mm 4.37 kg 170 mm 84 Nm 2 pc 304811 MIC-S90-A steel 90 75-165 mm 7.14 kg 280 mm 200 mm 140 mm 84 Nm 2 pc 304812 MIC-S90-C steel 90 235-300 mm 10.24 kg 430 mm 350 mm 290 mm 84 Nm 2 pc 304814 MIC-S120-A steel 120 75-165 mm 7.54 kg 280 mm 200 mm 140 mm 84 Nm 2 pc 304818 MIC-S120-B steel 120 165-235 mm 8.99 kg 350 mm 300 mm 210 mm 84 Nm 2 pc 304819 MIC-S120-C steel 120 235-300 mm 10.65 kg 430 mm 350 mm 290 mm 84 Nm 2 pc 304820 Systems 555

Heavy-Duty Supports Connector (concrete) MIC-C-AA/-D Modular four-part system for supporting cable trays, pipes and miscellaneous secondary steel Provides easy-to-install, adjustable, flexible solutions for industrial and heavy commercial applications, eliminating the need for welding Easy installation of MI girders between two walls Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461 Concrete connector base plates can be fastened using a variety of Hilti anchors No welding, no downtime Fast and easy installation and extension by one person Ordering designation MI girder type Weight Wrench size Tightening torque Sales pack Item number MIC-C90-AA concrete 90 3.51 kg 19 mm 84 Nm 2 pc 304825 MIC-C90-D concrete 90 7.32 kg 19 mm 84 Nm 2 pc 304827 MIC-C120-D concrete 120 7.69 kg 19 mm 84 Nm 2 pc 304829 556

Heavy-Duty Supports Connector (concrete) MIC-C-U of MI girders between two walls Fastening to concrete walls, floors or ceilings Light-duty version for non-cantilever structures with support on both sides Oblong holes simplify exact positioning Suitable for use with mechanical or chemical anchors depending on loading and type of supporting material Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461 Additional product information No cantilever possible, Always support on both sides. Ordering designation MI girder type Weight Wrench size Tightening torque Sales pack Item number MIC-C90-U concrete 90 2.29 kg 19 mm 84 Nm 2 pc 304826 Connector MIC-U-MA For supports or corner struts at angles between 0 and 180 Vibration-resistant screw fastenings thanks to self-locking nuts Can be finely adjusted by up to 5 mm Keyed hold for optimum transmission of forces and moments Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461 Additional product information To be used in pairs Systems 557

Heavy-Duty Supports Ordering designation MI girder type Weight Wrench size Tightening torque Sales pack Item number MIC-U-MA 90, 120 2.53 kg 19 mm 84 Nm 2 pc 304806 Connector MIC-CU-MA Connecting girders directly to concrete at angles between 0 and 180 Fastening to concrete/walls Oblong holes simplify exact positioning Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461 Ordering designation MI girder type Weight Wrench size Tightening torque Sales pack Item number MIC-CU-MA concrete 90, 120 2.04 kg 19 mm 84 Nm 4 pc 304828 U-bolt connector MIC-UB Reliable fastening with U-bolts (not included) Reliable fastening system for use with U-bolts Long slots for precise adjustment of pipe position Keyed hold for optimum transmission of forces Connector, square washer: DD11 MOD - HN 547, S235JR - DIN EN 10025; washer: DIN EN ISO 7089; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector, square washer 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461 558

Heavy-Duty Supports Ordering designation MI girder type Weight Wrench size Sales pack Item number MIC-UB90-M16 90 1.24 kg 19 mm 6 pc 304834 MIC-UB90-M12 90 1.26 kg 19 mm 10 pc 304831 MIC-UB120-M12 120 1.38 kg 19 mm 10 pc 304833 U-bolt MI-UB Provides easy-to-install, adjustable, flexible solutions for industrial and heavy commercial applications, eliminating the need for welding Small contact surface between U-bolt and pipe Minimizes crevice corrosion Complies with the DIN standard for U-bolts U-bolt: DD11 MOD - HN 547, S235JR - DIN EN 10025; nut: 8 grade steel; washer: DIN EN ISO 7093-1-200HV HDG: 45 µm - DIN EN ISO 1461 Systems 559

Heavy-Duty Supports Ordering designation Nominal pipe size Thread - M Weight Thread length - L Height - H Width - B Sales pack Item number MI-UB 25-M10 25 mm M10 oversized 0.13 kg 50 mm 76 mm 48 mm 20 pc 431587 MI-UB 40-M10 40 mm M10 oversized 0.16 kg 50 mm 92 mm 62 mm 20 pc 431588 MI-UB 50-M12 50 mm M12 oversized 0.24 kg 50 mm 109 mm 76 mm 20 pc 431589 MI-UB 65-M12 65 mm M12 oversized 0.27 kg 50 mm 125 mm 94 mm 10 pc 431590 MI-UB 80-M12 80 mm M12 oversized 0.29 kg 50 mm 138 mm 106 mm 10 pc 431591 MI-UB 100-M16 100 mm M16 oversized 0.64 kg 60 mm 171 mm 136 mm 10 pc 431592 MI-UB 125-M16 125 mm M16 oversized 0.72 kg 60 mm 191 mm 164 mm 10 pc 431593 MI-UB 150-M16 150 mm M16 oversized 0.8 kg 60 mm 217 mm 192 mm 5 pc 431594 MI-UB 200-M16 200 mm M16 oversized 1.01 kg 70 mm 283 mm 244 mm 5 pc 431595 MI-UB 250-M16 250 mm M16 oversized 1.19 kg 70 mm 334 mm 298 mm 5 pc 431598 Easy hand screw MIA-EH Bolt: 8.8 grade steel; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN- GJMW-450-7 - DIN EN 1562 HDG: 45 µm - DIN EN ISO 1461 Ordering designation MI girder type Length - L Weight Tightening torque Sales pack Item number MIA-EH90 90 120 mm 0.16 kg 84 Nm 10 pc 304887 MIA-EH120 120 150 mm 0.19 kg 84 Nm 10 pc 304888 One-hand screw MIA-OH Steel grade 8.8 HDG: 45 µm - DIN EN ISO 1461 Ordering designation MI girder type Length - L Weight Tightening torque Sales pack Item number MIA-OH90 90 95 mm 0.1 kg 84 Nm 10 pc 304889 MIA-OH120 120 127 mm 0.13 kg 84 Nm 10 pc 304890 Backing plate MIA-EH-P Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; spring: 1.4319 AISI 302, 1.431 DIN EN 10088 HDG: 45 µm - DIN EN ISO 1461 Ordering designation MI girder type Weight Sales pack Item number MIA-EH-P 90, 120 0.28 kg 10 pc 304891 560

Heavy-Duty Supports Toothed plate MIA-TP EN-GJMW-400-5 - DIN EN 1562, EN- GJMW-450-7 - DIN EN 1562 HDG: 45 µm - DIN EN ISO 1461 Ordering designation MI girder type Weight Sales pack Item number MIA-TP 90, 120 0.06 kg 20 pc 305707 Prevailing torque hex nut M12-F-SL-WS 3/4 Steel grade 8 HDG: 45 µm - DIN EN ISO 1461 Ordering designation Weight Tightening torque Sales pack Item number M12-F-SL-WS 3/4 0.02 kg 84 Nm 100 pc 382897 Girder end cap MIA-EC For closing the ends of girders Moplen EP 240H With built-in opening to permit drainage of liquids Temperature resistance -30-90 C Ordering designation MI girder type Weight Sales pack Item number MIA-EC90 90 0.02 kg 25 pc 432077 17 90.4 90.4 MIA-EC120 120 0.03 kg 25 pc 432078 17 90.4 120.4 Systems 561

Heavy-Duty Supports Beam clamp MI-SGC MI beam clamp for direct connection of MI girder to steel beam For steel beams with flange thicknesses from 3 to 36 mm and angles of up to 15 Corrosion protection on the steel beam is not damaged by the beam clamp Beam clamp is equipped with set of vibration-resistant washers Additional product information Use in pairs Ordering designation Thread - M Weight Width - B Wrench size Tightening torque Sales pack Item number MI-SGC M12 M12 0.35 kg 30 mm 19 mm 84 Nm 16 pc 233859 Beam clamp MI-DGC MI beam clamp for direct connection of MI girder to steel beam For steel beams with flange thicknesses from 3 to 36 mm and angles of up to 15 Corrosion protection on the steel beam is not damaged by the beam clamp Beam clamp is equipped with self-locking nuts Additional product information Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8 HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461 Beam clamps always to be used in pairs 562

Heavy-Duty Supports Ordering designation MI girder type Weight Tightening torque Sales pack Item number MI-DGC 90 90 0.96 kg 84 Nm 4 pc 233860 MI-DGC 120 120 1 kg 84 Nm 4 pc 233861 MI/MQ cross connector MIC-MI/MQ-X Direct connection of MQ installation channels to the MI system Keyed hold for optimum transmission of forces and moments Forces and moments are transmitted reliably through positive engagement Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 40 µm - DIN EN ISO 10684 Ordering designation MI girder type Weight Tightening torque Sales pack Item number MIC-MI/MQ-X 90, 120 0.36 kg 50 Nm 16 pc 304881 Connector MIC-MI/MQ M8 Direct connection of MQ installation channels to the MI system Forces and moments are transmitted reliably through positive engagement Keyed hold for optimum transmission of forces and moments Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; bolt 45 µm - DIN EN ISO 1461 Systems 563

Heavy-Duty Supports Ordering designation MI girder type Weight Tightening torque Sales pack Item number MIC-MI/MQ-M8 90, 120 0.05 kg 20 Nm 5 pc 304882 Elevator part MIC Horizontal divider beam in elevator shafts Fastening the guide rails HDG: 55 µm - DIN EN ISO 1461 Easy installation between two walls Oblong holes simplify exact positioning No welding, no downtime Ordering designation MI girder type Weight Sales pack Item number MIC-U-EL 90 0.97 kg 8 pc 431681 MIC-90-U-ED 90 2.98 kg 2 pc 431680 MIC-U-EF 90, 120 0.22 kg 8 pc 431682 564

Ventilation Systems Perforated band hanger MV-SI For the installation of round air ducts to the ceiling Easy to use Fits all folded spiral-seam tube sizes Built-in acoustic insulation piece with through-hole and preassembled U-washer for M8/M10 threaded rods DD11 steel - DIN EN 10111, EPDM Sendzimir galvanized Temperature resistance -40-110 C Hardness insulation material 60 ±5 Shore A Noise reduction 18 db (A) Ordering designation Maximum load - F Maximum tensile load - Fz Sales pack Item number MV-SI 600 N 0.6 kn 50 pc 386530 Perforated band LB DX51D+Z275-N-A - DIN EN 10346 Galvanized Ordering designation Width - B Hole diameter - D Distance between holes - A X Cross section thickness - s Length - L Maximum tensile load - F Sales pack Item number LB 12 12 mm 5.1 mm 14 mm 7 mm 0.9 mm 10000 mm 0.75 kn 10 pc 57711 LB 17 17 mm 7 mm 20 mm 10 mm 1 mm 10000 mm 1.2 kn 10 pc 57712 LB 26 26 mm 8.2 mm 26 mm 17.2 mm 1.2 mm 10000 mm 2.2 kn 10 pc 57713 Systems 565

Ventilation Systems Air duct bracket MVA-LC/-LP For the installation of rectangular air ducts to ceilings Convenient solution for fastening ventilation ducts directly to ceilings, suspended on threaded rods or in conjunction with MQ system for rising ducts Scale for precise alignment and stand-off installation Movable cage allows compensation of dimensional tolerances in the structure and avoidance of rebars during installation DD11 steel - DIN EN 10111, EPDM Galvanized Temperature resistance -40-110 C Hardness insulation material 40 ±5 Shore A Noise reduction 12 db (A) Approvals Acustic insulaton DIN 4109 inspected Ordering designation Maximum load - F Thread - M Weight Approvals Sales pack Item number MVA-LC 60 600 N M8, M10 143 g Acustic insulaton DIN 4109 inspected 25 pc 386533 Air duct bracket MVA-ZC For the installation of rectangular air ducts to ceilings Quick through-fastening for M8/M10 threaded rods Movable cage allows compensation of dimensional tolerances in the structure and avoidance of rebars during installation Can be fitted on MQ installation channel or fastened directly to the supporting material DD11 steel - DIN EN 10111, EPDM Galvanized Temperature resistance -40-110 C Hardness insulation material 40 ±5 Shore A Noise reduction 12 db (A) Ordering designation Maximum load - F Thread - M Weight Sales pack Item number MVA-ZC 600 N M8, M10 136 g 25 pc 386531 566

Ventilation Systems Heavy air duct bracket MVA-LH For rectangular air ducts in vertical shafts Perfect for heavy loads Convenient solution for bridging the thickness of the insulation (up to 30 mm) Oblong hole allows compensation of tolerances DD11 - DIN EN 10111 Galvanized Temperature resistance -40-110 C Hardness insulation material 60 ±5 Shore A Noise reduction 12 db (A) Approvals Acustic insulaton DIN 4109 inspected Insulation material EPDM rubber Ordering designation Maximum load - F Thread - M Weight Approvals Sales pack Item number MVA-LH 800 N M8, M10 255 g Acustic insulaton DIN 4109 inspected 25 pc 2047749 Systems 567