Broadcast Antennas TV UHF UHF Band IV-V TV Antennas I230E Series -4 dipoles Panels- Electrical characteristics I230 EH I230 EV I230 EC Frequency range (MHz) 470-860 Input impedance (ohm) 50 Horizontal Vertical ELLIPTICAL (±45 ) Gain (dbd) @ 650 MHz Gain (dbi) 11.5 @ 650 MHz 9.5 @ 650 MHz 12 @ 650 MHz @ 650 MHz Axial Ratio (db) ± 1.5 HPBW E Plane (deg.) @ 650 MHz 60 @ 650 MHz 60 @ 650 MHz HPBW H Plane (deg.) @ 650 MHz 22 @ 650 MHz 30 @ 650 MHz Front to Back Ratio (db) 20 20 15 VSWR Max. Power (KW rms) (@ 650 MHz) < 1.1 (1.08 typical) 7/8" < 1.14-1-5/8" Version 2.5 5 (I230HP-1-5/8 type) < 1.1 (1.08 typical) 1.1 (Circular) / 1.2 (Linear) 2.5 5 (2.5 per input) Voltage BreakDown (kv) 10 10 7 Mechanical characteristics Connector type /position 7/8" EIA / Rear 1-5/8"EIA / Rear 7/8" EIA / Rear 2x7/8" EIA/Rear Dimensions (HxWxD) (mm) 1050 x 450 x 190 820 x 450 x 240 1150 x 450 x 210 Frontal Wind Load (N) (wind speed = 150 Kph) 650 510 710 Lateral Wind Load (N) (wind speed = 150 Kph) 300 310 370 Max Wind (Kph) 200 200 200 Weight (N) / mass (Kg) 157 / 16 115 / 11.5 180 / 18 Mounting type Brackets for Pole Ø 60 to 160 mm / Tower Face / Custom Interface Temperature range ( C) -50 to +60 Pressurizing 100 kpa (1 Atm) Materials Back Panel Inox Steel AISI 304 Internal Coax lines / dipoles Silver plated Brass / Electrolytic Copper & brass Inox Steel AISI 304 Radome (material/color) Fiber-glass /Grey (Red, White, Green on request) All metallic components are DC grounded
Broadcast Antennas TV UHF I230EH - H Pol. UHF 4 Dipoles Panel HORIZONTAL PoIarization 4 Dipoles Panel Technical data Product Code XA241600 XA258700 1-5/8 Flange version ELECTRICAL CHARACTERISTICS Frequency Band 470-860 MHz Horizontal Gain. dbd (@ 650 MHz) F/B Ratio 20 db V.S.W.R. 1.1 (1.08 Typical) HPBW E Plane (deg.) HPBW H Plane (deg.) Max Input Power Voltage Breakdown 60 (@ 650 MHz) 22 (@ 650 MHz) 2.5 KW (@ 650 MHz) 5 KW (@ 650 MHz) 1-5/8 version 10 KV All metal parts are ground connected MECHANICAL CHARACTERISTICS Input Flanges Nr /Size EIA 7/8 (EIA 1-5/8 HP version) Dimensions (HxWxP) 1050 x 450 x 190 mm Weight/Mass 1 N / 1 Kg Wind loads (wind=160 Kph) Max Wind Operating temperature Pressurization Mounting Front: 650 N Side: 300 N 200 Kph -50 C to +60 C 100 KPa (1 Atm) -Tower face -Ø 60 to 160 mm Pole Brackets -Custom Mast MATERIALS Stainless Steel AISI 304 Inner lines / dipoles Radome Silver plated Brass/copper Grey Standard Fiberglass Other colours on request
Broadcast Antennas TV UHF I230E - Pol. UHF 4 Dipoles Panel HORI UHF Panel -Typical Radiation Patterns Typical E/EM Azimuth Patterns (@ 665 MHz) Typical E/EM Elevation Patterns (@ 665 MHz)
Broadcast Antennas TV UHF I230EV - V Pol. UHF 4 Dipoles Panel VERTICAL PoIarization 4 Dipoles Panel Technical data Product Code XA246200 ELECTRICAL CHARACTERISTICS Frequency Band 470-860 MHz Vertical Gain 9.5 dbd (@ 650 MHz) F/B Ratio 20 db V.S.W.R. 1.1 (1.08 Typical) HPBW E Plane (deg.) 60 (@ 650 MHz) HPBW H Plane (deg.) 30 (@ 650 MHz) Max Input Power Voltage Breakdown 2.5 KW (@ 650 MHz) 10 KV All metal parts are ground connected MECHANICAL CHARACTERISTICS Input Flanges Nr /Size EIA 7/8 Dimensions (HxWxP) 820 x 450 x 240 mm Weight/Mass 113 N / 11.5 Kg Wind loads (wind=160 Kph) Max Wind Operating temperature Pressurization Mounting Front: 510 N Side: 310 N 200 Kph -50 C to +60 C 100 KPa (1 Atm) -Tower face -Ø 60 to 160 mm Pole Brackets -Custom Mast MATERIALS Stainless Steel AISI 304 Inner lines / dipoles Radome Silver plated Brass/copper Grey Standard Fiberglass Other colours on request
Broadcast Antennas TV UHF I230EV - V Pol. UHF 4 Dipoles Panel UHF Panel -Typical Radiation Patterns Typical E/EM Azimuth Patterns (@ 665 MHz) Typical E/EM Elevation Patterns (@ 665 MHz)
Broadcast Antennas TV UHF I230EC - E Pol. UHF 4 Dipoles Panel ELLIPTICAL PoIarization 4 Dipoles Panel Technical data Product Code XA2258000 ELECTRICAL CHARACTERISTICS Frequency Band 470-860 MHz Elliptical (any config.) Gain (@ 650 MHz) 12 dbd F/B Ratio 15 db Axial ratio ± 1.5 db V.S.W.R. 1.15 (Circular Pol.) 1.20 (Linear Pol.) Max Input Power 2.5 KW (@ 650 MHz) Voltage Breakdown 7 KV All metal parts are ground connected MECHANICAL CHARACTERISTICS Input Flanges Nr /Size 2 x EIA 7/8 Dimensions (HxWxP) 1150 x 450 x 210 mm Weight/Mass 180 N / 18 Kg Wind loads (wind=160 Kph) Max Wind Operating temperature Pressurization Mounting Front: 710 N Side: 370 N 200 Kph -50 C to +60 C 100 KPa (1 Atm) -Tower face -Ø 60 to 160 mm Pole Brackets -Custom Mast MATERIALS Stainless Steel AISI 304 Inner lines / dipoles Radome Silver plated Brass/copper Grey Standard Fiberglass Other colours on request
Broadcast Antennas TV UHF I230EC E Pol. UHF 4 Dipoles Panel Elliptical UHF Panel - Transmitting Setting Configuration sample 3 Channels transmitting in 3 different polarization CIRCULAR POLARIZATION With 7/8 Input Hybrid for right-hand or Left-hand Circular 90 Hybrid TX Channel (1) Vertical TX Channel (2) Circular TX Channel (3) (1) (2) (3) Phase-Amplitude settings (see table) Amplitude Ratio between Dipoles 2 1 0-180 -135-90 -45 0 45 90 135 180 Phase between Dipoles agg.06/2018
Broadcast Antennas TV UHF I230E - Pol. UHF 4 Dipoles Panel E
Broadcast Antennas TV UHF I230E - Pol. UHF 4 Dipoles Panel
Broadcast Antennas TV VHF PVH74000 VHF Band III TV 4 Dipoles Panel Broadcasting Antennas MAIN FEATURES Band III TV Product Code: PVH74000 Electrical characteristics Frequency range Input impedance Gain VSWR Max input Power Freq. 174-240 MHz 174-240 MHz 50 ohm Horizontal 11 dbd <1.1 5 kw Input Flange EIA 7/8" Mechanical characteristics Input Connector Temperature range Weight (Mass) Max wind (survival) Mount Wind loads (wind= 160 Km/h) EIA 7/8" -40 C - +70 C 588 N (60 Kg 132.2 lbs) 200 km/h Optional Clamps on request 1167 N (front thrust) 245 N (lateral thrust) Materials External Parts Hot Dip Galvanized Steel Inner lines / Connections Silver Plated Alu/Brass Nuts, & bolts inox steel AISI 304 E/EM Radiation Patterns
Broadcast Antennas TV VHF PVH72000 VHF band III TV 2 Dipoles Panel Broadcasting Antennas MAIN FEATURES Product Code: PVH72000 Electrical characteristics Frequency range Input impedance Gain VSWR Max input Power Band III TV Freq. 174-240 MHz 174-240 MHz 50 ohm Horizontal Vertical 8 dbd <1.1 5 kw Input Flange EIA 7/8" Mechanical characteristics Input Connector Temperature range Weight (Mass) Max wind (survival) Mount EIA 7/8" -40 C - +70 C 284.2 N (29 Kg 63.9 lbs) 200 km/h Optional Clamps on request Materials External Parts Hot Dip Galvanized Steel Inner lines / Connections Silver Plated Alu/Brass Nuts, & bolts inox steel AISI 304 E/EM Radiation Patterns
Broadcast Antennas TV VHF PVH74000 VHF Band III TV4 Dipoles Panel Broadcasting Band III TV Antennas MAIN FEATURES Product Code: NVV72000 Electrical characteristics Frequency range Input impedance Gain VSWR Max input Power Input Flange Freq. Input Flange 174-240 MHz EIA 7/8" (7-16 Opt.) 174-240 MHz 50 ohm Vertical 5.1 dbd <1.2 3 kw (2 kw w/7-16 Conn.) Mechanical characteristics Input Connector Temperature range Weight (Mass) Max wind (survival) Mount Wind loads (wind= 160 Km/h) EIA 7/8" (7-16 Optional) -40 C - +70 C 186.2 N (19 Kg 41.9 lbs) 200 km/h Optional Clamps on request 255 N (front thrust) 314 N (lateral thrust) Materials External Parts Hot Dip Galvanized Steel Inner lines / Connections Silver Plated Alu/Brass Nuts, & bolts inox steel AISI 304 E/EM Radiation Patterns
Broadcast Antennas TV VHF YVV74001 & YVV74002 VHF Band III TV 4 Element Yagi Broadcasting Antennas MAIN FEATURES Product Code: Electrical characteristics Frequency range Input impedance Gain VSWR Max input Power Band III TV Freq. 174-240 MHz YVV74001 Input Flange EIA 7/8" YVV74002 174-200 MHz 200-240 MHz 50 ohm Vertical/Horizontal 5.1 dbd <1.22 2 kw x Input Mechanical characteristics Input Connector Temperature range Weight Mass Kg (lbs) Max wind (survival) Mount Wind loads (wind= 160 Km/h) (front thrust) (lateral thrust) EIA 7/8" -40 C - +70 C 37.2 N 28.4 N 3.8 (8.4) 2.9 (6.4) 200 km/h Pole Ø 50-114 mm 155 N 130 N 370 N 295 N Materials External Parts inox steel AISI 304 Inner lines / Connections Copper/Brass Nuts, & bolts inox steel AISI 304 E/EM Radiation Patterns
Broadcast Antennas TV VHF YVV75001 & YVV75002 VHF Band III TV 5 Element Yagi Broadcasting Antennas MAIN FEATURES Product Code: Electrical characteristics Frequency range Input impedance Gain VSWR Max input Power Band III TV Freq. 174-240 MHz YVV75001 Input Flange EIA 7/8" YVV75002 174-200 MHz 200-240 MHz 50 ohm Vertical/Horizontal 6 dbd <1.22 2 kw x Input Mechanical characteristics Input Connector Temperature range Weight Mass Kg (lbs) Max wind (survival) Mount Wind loads (wind= 160 Km/h) (front thrust) (lateral thrust) EIA 7/8" -40 C - +70 C 36.3 N 30.4 N 3.7 (8.2) 3.1 (6.8) 200 km/h Pole Ø 50-114 mm 155 N 130 N 388 N 335 N Materials External Parts inox steel AISI 304 Inner lines / Connections Copper/Brass Nuts, & bolts inox steel AISI 304 E/EM Radiation Patterns
Broadcast Antennas TV VHF YVV76001 & YVV76002 VHF Band III TV 6 Element Yagi Broadcasting Antennas MAIN FEATURES Product Code: Electrical characteristics Frequency range Input impedance Gain VSWR Max input Power Band III TV Freq. 174-240 MHz YVV76001 Input Flange EIA 7/8" YVV76002 174-200 MHz 200-240 MHz 50 ohm Vertical/Horizontal 7.1 dbd <1.22 2 kw x Input Mechanical characteristics Input Connector Temperature range Weight Mass Kg (lbs) Max wind (survival) Mount Wind loads (wind= 160 Km/h) (front thrust) (lateral thrust) EIA 7/8" -40 C - +70 C 43.1 N 32.3 N 4.4 (9.7) 3.3 (7.3) 200 km/h Pole Ø 50-114 mm 155 N 130 N 405 N 375 N Materials External Parts inox steel AISI 304 Inner lines / Connections Copper/Brass Nuts, & bolts inox steel AISI 304 E/EM Radiation Patterns
Broadcast Antennas TV VHF YVL77000 VHF Band III TV 7 Elements Log Periodic Broadcasting Antennas MAIN FEATURES Product Code: YFL77000 Electrical characteristics Frequency range Input impedance Gain VSWR Max input Power Band III TV Freq. 174-240 MHz 174-240 MHZ 50 ohm Vertical/Horizontal 6 dbd < 1.2 2.5 kw Input Flange EIA 7/8" Mechanical characteristics Input Connector Temperature range Weight (Mass) Max wind (survival) Mount Wind loads (wind= 160 Km/h) EIA 1-5/8" -40 C / +70 C 137 N (14 Kg 31 lbs) 200 km/h Pole Ø 60-76 mm 75 N (front thrust) 250 N (lateral thrust) Materials External Parts Inox steel AISI 304 Inner lines / Connections Silver Plated Alu/Brass Nuts, & bolts Inox steel AISI 304 E/EM Radiation Patterns
Broadcast Antennas DAB PVMX4000 - PVM74000 Mixed Pol. DAB 4 dipoles Panel Broadcasting Antennas MAIN FEATURES VHF TV DAB-DAB+ Frequency 174-240 MHz (*) Input Flanges 2 x 7-16 2 x EIA 7/8 Product Code: PVMX4000 (7-16 input) - PVM74000 (7/8 input) Electrical characteristics Frequency range (*) Input impedance Gain VSWR Max input Power PVMX4000 Max input Power PVM74000 Pol. H.: 174-223 MHz Pol. V.: 174-240 MHz 50 ohm Horizontal/Vertical/Circular/Elliptical 4.5 dbd (circular) 7.5 (Linear) < 1.1 (circular) <1.2 (Linear) 2 kw x Input 4 kw x Input 1310 (51.6) Mechanical characteristics Input Connector PVMX4000 Input Connector PVM74000 Temperature range Weight (Mass) Max wind (survival) Mount Wind loads (wind= 160 Km/h) 2 x 7-16 2 x 7/8 EIA -40 C / +70 C 412 N (42 Kg 93 lbs) 200 km/h Tower face Mount (Brackets not included) 800 N (front thrust) 655 N (Side thrust) 1450 (57.1) Materials External Parts Internal Parts Hot dip Galvanised steel Silver Plated Alu, Brass Insulators Teflon Nuts, & bolts Inox steel AISI 304 Radome Fiberglass 450 (17.7) E/EM Radiation Patterns Horizontal Comp. 0.9 0.8 0.7 E-Plane H-Plane 0.9 0.8 0.7 Vertical Comp. 0.6 0.6 0.5 0.5 0.4 0.4 0.3 0.3 0.2 0.2 0.1 0.1 agg.09/2018
Broadcast Antennas UHF-VHF UHF - VHF Power Dividers General Features Impedance: 50 ohm Max.Insertion Loss: 0.1 db VSWR (typical); 1.05 Temperature Range: -40 +70 C Pressurisation: 300 hpa Materials: External Body: Brass; Inner Lines: Brass, Copper, Silver Plated Alu Insulators: Teflon; Finish: Painting RAL7001 Type Fre. MHz # out Flange in Flanges out Power rating @ 200 MHz DVB27700 174-240 2 EIA 7/8" EIA 7/8" 5 kw DVB21700 174-240 2 EIA 1-5/8" EIA 7/8" 10 kw DVB37700 174-240 3 EIA 7/8" EIA 7/8" 5 kw DVB31700 174-240 3 EIA 1-5/8" EIA 7/8" 12 kw DVB33100 174-240 3 EIA 3-1/8" EIA 1-5/8" 35 kw DVB47700 174-240 4 EIA 7/8" EIA 7/8" 5 kw DVB41700 174-240 4 EIA 1-5/8" EIA 7/8" 12 kw DVB43700 174-240 4 EIA 3-1/8" EIA 7/8" 35 kw Type Fre. MHz # out Flange in Flanges out Power rating @ 600 MHz DUB27700 470-860 2 EIA 7/8" EIA 7/8" 2.8 kw DUB21700 470-860 2 EIA 1-5/8" EIA 7/8" 5.6 kw DUB21100 470-860 2 EIA 1-5/8" EIA 1-5/8" 6.6 kw DUB23100 470-860 2 EIA 3-1/8" EIA 1-5/8" 13.2 kw DUB23300 470-860 2 EIA 3-1/8" EIA 3-1/8" 20 kw DUB24300 470-860 2 4-1/16" EIA 3-1/8" 30 kw DUB26300 470-860 2 EIA 6-1/8" EIA 3-1/8" 40 kw DUB26400 470-860 2 EIA 6-1/8" 4-1/16" 60 kw DUB37700 470-860 3 EIA 7/8" EIA 7/8" 2.8 kw DUB31700 470-860 3 EIA 1-5/8" EIA 7/8" 6.6 kw DUB33100 470-860 3 EIA 3-1/8" EIA 1-5/8" 20 kw DUB34300 470-860 3 4-1/16" EIA 3-1/8" 30 kw DUB47700 470-860 4 EIA 7/8" EIA 7/8" 2.8 kw DUB41700 470-860 4 EIA 1-5/8" EIA 7/8" 6.6 kw DUB43700 470-860 4 EIA 3-1/8" EIA 7/8" 11.2 kw DUB43100 470-860 4 EIA 3-1/8" EIA 1-5/8" 20 kw DUB44100 470-860 4 4-1/16" EIA 1-5/8" 26.4 kw DUB44300 470-860 4 4-1/16" EIA 3-1/8" 30 kw DUB57700 470-860 5 EIA 7/8" EIA 7/8" 2.8 kw DUB51700 470-860 5 EIA 1-5/8" EIA 7/8" 6.6 kw DUB53700 470-860 5 EIA 3-1/8" EIA 7/8" 20 kw DUB67700 470-860 6 EIA 7/8" EIA 7/8" 2.8 kw DUB61700 470-860 6 EIA 1-5/8" EIA 7/8" 6.6 kw DUB63700 470-860 6 EIA 3-1/8" EIA 7/8" 16.8 kw DUB66300 470-860 6 EIA 6-1/8" EIA 3-1/8" 69 kw DUB87700 470-860 8 EIA 7/8" EIA 7/8" 2.8 kw DUB81700 470-860 8 EIA 1-5/8" EIA 7/8" 6.6 kw DUB83700 470-860 8 EIA 3-1/8" EIA 7/8" 20 kw Several models of UNBALANCED OUTPUT POWER dividers available. Contact us for details
Broadcasting Antennas UHF band I230ECX Super-Panel The super-panel is a new, innovative antenna that will satisfy the specific needs of the US market requirements during the repacking phase and set a new standard for the ATSC 3.0 broadcasting antenna, it is the result of an accurate analysis focused on the creation of higher penetration system. Based on the well-known panel antenna technology, proven by more than 40 years of on-site operation, the super-panel is the result of improved dipoles design for the Elliptical operation and a smart reconfiguration to achieve high power, elliptical polarization and low wind load in a compact cylindrical radome. Thanks to its dual 3-1/8 input each driving 8-bay array the total power handling capability is up to 20 kw rms. The extreme advantage of this solution is its panel technology core which results in a true whole UHF Broadband performance and a true Elliptical polarization radiation pattern. The dual 3-1/8 input provides also the flexibility to change the elliptical H/V ratio just changing the phase of the signals feeding the 2 inputs. This means that with the same antenna it is possible to generate a Circular polarization as well as an Horizontal only or Vertical only polarization. The super-panel is available in two version: Narrow Cardioid or Wide-Cardioid pattern design and it is specifically designed for side mount application. It can be used both as a stand-alone or stacked in array configuration. The super-panel is the perfect choice for the Repacking either for a transient solution or for compact and inexpensive main antennas, thanks to its unique characteristics: Real broadband operation, to host at the same time multiple UHF channels serving as a multi-user antenna Real Elliptical polarization, future proof, and the perfect choice for the ATSC 3.0 digital broadcasting standard. Lightweight and compact with a very low wind load: the perfect solution for an easy side-mount installation.
filed for international patent Broadcasting Antennas UHF band I230ECN Elliptical UHF Broadband Compact Antenna Broadcasting Antennas MAIN FEATURES Product Code: Electrical characteristics Frequency range Input impedance BROADBAND Freq. Freq. 470-700 MHz 470-700 MHz 50 ohm Dual Input Flange EIA 3-1/8 Horizontal/Vertical/Circular/ Adjustable Elliptical (*) * Selectable H/V Ratio for each Channel VSWR < 1.2 Gain 12.5 dbd (H Comp.) 13.5 dbd (V Comp.) Electrical Beam Tilt 1 deg. Input Connectors #2 x EIA 3-1/8" Max input Power Mechanical characteristics SUM38002 -NARROW CARDIOID PATTERN- 10 kw per Input (20 kw for any configuration) Height Diameter Weight (Mass) Max wind (survival) Projected Area (FPA) 3040 mm (10 feet) 555 mm (21.9 inches) 2157 N (220 Kg 485 lbs) 200 km/h 1.7 m 2 18 ft 2 Materials Cylindrical Radome Fiberglass Color: White Inner lines / Connections Silver Plated Alu/Brass Nuts, & bolts inox steel AISI 304 Tower Side Mount Brackets Hot Dip Galvanized Steel E/EM Radiation Patterns Horizontal Pol. Vertical Pol. (Scaled) 1 0.9 0.8 1 0.9 Horizontal Pol. Vertical Pol. 0.7 0.6 0.8 0.5 0.4 0.7 0.3 0.2 0.6 0.1 0.5 0.4 0.3 0.2 0.1 0-10 -5 0 5 10 15 20 25 30 35 40 45
filed for international patent Broadcasting Antennas UHF band I230ECW Elliptical UHF Broadband Compact Antenna Broadcasting Antennas MAIN FEATURES Product Code: Electrical characteristics Frequency range Input impedance BROADBAND Freq. Freq. 470-700 MHz 470-700 MHz 50 ohm Dual Input Flange EIA 3-1/8 Horizontal/Vertical/Circular/ Adjustable Elliptical (*) * Selectable H/V Ratio for each Channel VSWR < 1.2 Gain Electrical Beam Tilt 11 dbd (H Comp.) 1 deg. 11 dbd (V Comp.) Input Connectors Max input Power Mechanical characteristics Height Diameter Weight (Mass) Materials Cylindrical Radome Fiberglass Color: White Inner lines / Connections Silver Plated Alu/Brass Nuts, & bolts inox steel AISI 304 Tower Side Mount Brackets Hot Dip Galvanized Steel E/EM Radiation Patterns SUM38001 -WIDE CARDIOID PATTERN- #2 x EIA 3-1/8" 10 kw per Input (20 kw for any configuration) 3040 mm (10 feet) 555 mm (21.9 inches) 2157 N (220 Kg 485 lbs) Max wind (survival) 200 km/h Projected Area (FPA) 1.7 m 2 18 ft 2 Horizontal Pol. Vertical Pol. (Scaled) 1 0.9 0.8 1 0.9 Horizontal Pol. Vertical Pol. 0.7 0.6 0.8 0.5 0.4 0.7 0.3 0.2 0.6 0.1 0.5 0.4 0.3 0.2 0.1 0-10 -5 0 5 10 15 20 25 30 35 40 45
Broadcast Antennas Antenna Systems Mechanical support Tampa, FL Antenna System 80 Panels (16 Bays; 120 kw rms) Pentagonal Section Mast with Flanged Interface and Cylindrical radome - Radiation Patterns Measurement (Horizontal & Vertical planes) - VSWR - Pressurization IRTE test Field with 164 ft (50 m) Tower -Antenna Systems Design (Electrical & Mechanical) -Coverage Area Forecast Maps -Interference Analysis -Network Planning -Link Budgets for Radio Links -WinANT (IRTE Antenna System Design software)
Broadcast Antennas is the leading Italian Antenna Manufacturing company which has gained in the last years a growing place in the market, due its excellence in design and supply of turn-key projects for DVB-T switch-off. Itech develops high performance Antenna Systems in UHF, VHF and FM bands. It is the only company who manufacture and develop the whole product line: panels, dipoles, Yagi, balanced and unbalanced power dividers, phased cables, flanges, rigid lines, filters, combiners and patch-panels along with custom designed radomes and steel structures for specific projects. Thanks to Italian particular territory, Itech has been involved in many projects for antenna special design, becoming a leader in notch design, electrical tilt definition and custom Vertical and Horizontal diagram special design. We developed special antennas for USA, where delivered antennas for the most important transmitting sites such as Sutro Tower, Boca Raton, Minneapolis, Omaha, etc. Moreover, Itech is a key reference for the radiofrequency design and planning with high end software specially designed for broadcasting market. The antenna system have been developed to comply with all the international standards and with the best state of the art technology. Products Hybrids and combiners; Power splitters up to 6-1/8 (60 KW) Design / Simulations / Manufacture Design and realization of mechanical structure (tower, spines and poles)