lindab marine Enjoying life at sea. We bring the freshness inside too
A cruise ship is a place where you enjoy life and freedom. Choose an indoor climate solution that ensures a perfect experience on board. The pleasure of perfect ventilation is an important part of floating luxury When the passengers board a cruise ship, they are about to have an experience of a lifetime. Their expectations of comfort and luxury are therefore high and the indoor climate is part of the overall impression. The ventilation must comply with all the requirements we have of a pleasant indoor climate in terms of air and temperature as well as noise. In brief: the ventilation should contribute to a unique experience on board. Solutions based on close cooperation Welcome on board Lindab Marine has more than 30 years experience of supplying ventilation solutions to anything from cruise ships to container ships and oil rigs. The Lindab Group was established in 1959, and we are one of the world s leading suppliers to the ventilation industry. Our solutions for the marine and offshore industries are based on the same well-known, tested and documented products we have delivered to large construction projects around the world. Swedish Institute for Technical Approval In Construction All our products have the relevant fire safety approvals and comply with international marine industry requirements. See all approvals at www.lindabmarine.com Although we have a wide range of standard diffusers for the marine industry, many of our marine solutions are based on close cooperation between our customers and our competence centres. In our sound and air laboratories, our engineers simultaneously test the designs and offer input for optimising the solutions, before they are launched on the market. All solutions have to be well documented and withstand the often harsh conditions in marine installation. However, the joy of development is what drives us, and customer satisfaction and appreciation are just some of our rewards for designing a perfect solution. While we use our extensive expertise for developing solutions for land-based installations, designing marine installations is often very different from land-based solutions. Not only are the products very different, they also have to comply with numerous regulations and international rules. On top of this, we often face the challenge of making the products as small and efficient as possible since free space is often in short supply. This makes it even more exciting for us to deliver the right product at the right place at the right time. Martin Karlsen, Product Management at Lindab Comfort A/S Fulfilling the highest expectations to quality and comfort
A good indoor climate is an important part of the very special experience on board. Our product range allows you to create the perfect ventilation solution. A cruise ship offers the experience of a lifetime to its passengers and their expectations to comfort and luxury are high. Making sure the ship is prepared for any kind of adventure When the indoor climate is not noticed, you have reached perfection We know the challenges you face! We can therefore help you create the optimum solution. We supply total solutions that include products, support and logistics, that streamline your construction process. As early as at the projecting stage, you benefit from having Lindab Marine as your supplier. Our IT programs enable you to dimension your solution to your requirements. With CADvent, you get access to, among other things, advanced calculation and dimensioning options. As a result, you can include all the right components from the start and see the entire solution in a 3D model. Based on your drawing, you can send us your parts list directly in electronic form. Timely delivery guaranteed We know that reliable delivery is a decisive factor for marine industry solutions. When you choose a ventilation solution from Lindab Marine, your products are supplied by one of the biggest players in the market. That is your guarantee of prompt and reliable delivery from a flexible supplier. We supply the solution according to your requirements packaged by deck or with components separated by type. We simplify the logistics for you. You have only one point of contact, and we take care of the rest. With local distribution offices all over Europe, we are always close by so you can quickly get what you need. Lindab Marine provides the total solution: Our duct systems have a large number of advantages that match the needs and requirements of the marine industry. For instance, our ducts are better sealed, weigh less and are easy to install also when space is limited. We help you choose the right technical products. We supply all technical components silencers, filters, grilles etc. You can choose from a large range of fittings which will ensure you an efficient solution with a beautiful finish. On www.lindabmarine.com, you have access to IT programs that make it easy for you to calculate, dimension and document the solution.
Our products comply with international marine requirements. We offer you a safe solution and peace of mind. Providing you with a reliable and well-documented solution We have the big picture in mind when designing our solutions. That is why we have developed a product range that meets the special requirements of marine solutions. With products from Lindab Marine, you can design a ventilation solution that weighs less, takes up less space and is easier to install than other solutions. We supply all the products you need to create a total solution with ducts, silencers, fittings, ventilators and all other technical components. The Lindabisol and Lindab Safe Click duct systems are obvious choices for the marine industry. Both systems are classified as leakage class D and are a safe choice if you want a well-sealed solution and thereby a low energy consumption. In the long term, this is an economical and environmentally sound solution. In our advanced sound laboratory, we constantly strive to reduce ventilation-related noice to a minimum. When you implement a solution, you have to be sure of the quality. It is therefore important for us to test and document noise and noise suppression when developing new, functional products. Smaller dimensions or less noise? You can draw on our knowledge and experience when calculating the dimensions of e.g. duct systems or silencers so you create an optimum solution with the lowest possible noise level. Our aerodynamic silencer Aerodim allows you to reduce noise by 50 per cent, reduce pressure loss by 40 per cent compared to standard silencers or reduce the dimensions of the overall solution. By choosing Safe Click, you get an additional advantage in connection with the installation. The solution is easy to install, even when space is extremely limited. That helps you reduce your installation costs. The double Safe sealing strips ensure a tight seal and prevent the fresh air from being polluted by dust or other impurities. Isol is a pre-insulated ductsystem for transportation of cold and hot air. It is especially suitable for preventing condensation. Conforms to a wide range of Regulations/Standards. A safe solution offers you peace of mind every day
To be a world leader you need local insight Lindab is an international Group that develops, manufactures and distributes products and system solutions in sheet metal and steel for the ventilation industry. Lindab covers everything from ventilation parts to total indoor climate solutions. The Lindab Group has approximately 5,000 employees in 31 countries and had net sales of SEK 9,840 m in 2008. Lindab Marine has more than 30 years experience with the supply of marine products all over the world. Our continuous product development has made us one of the world s leading suppliers for the marine industry. We continue to work towards creating even more efficient solutions for our customers. Lindab Marine has its head office in Denmark and branches all over Europe. We are therefore always close by and have insight into local conditions where you need it most. For more information visit www.lindabmarine.com. Contact Denmark Langkaer 20 DK-6100 Haderslev Phone: +45 73 23 23 23 Fax: +45 73 23 23 24 Email: lindab@lindab.dk Germany Carl-Benz-Weg 18 D-22941 Bargteheide Phone: +49 (0)4532-2859-0 Fax: +49 (0)4532-5666 Email: lindab@lindab.de Italy Lindab S.r.l Via Pisa 5-7 I-10088 Volpiano (TO) Phone: +39 011 99 520 99 Fax: +39 011 99 524 99 Email: lindab@lindab.it Poland Lindab Sp. z o.o. ul. Kolejowa 311, Sadowa PL-05-092 omianki Phone: +48 022 489 88 00 Fax: +48 022 751 69 65 Email: info@lindab.pl Usa Rex J. King, Jr., PE King & Associates LLC 111 Piping Rock Dr. Houma, Louisiana 70363 Phone: 985-851-2002 Email: rex@kingstructural.com