rocca
DESCRIPTION rocca Available in two sizes, Rocca offers a wide range of photometric distributions from very narrow to very wide beams and solutions for all types of illumination: lighting facades, optimising architectural details, lighting trees and so on. Rocca Midi and Maxi are available in various models: Monochromatic 15 (Midi) or 30 (Maxi) LEDs RGB 3x5 (Midi) or 3x10 (Maxi) LEDs, spread evenly by colour Static or dynamic With a selection of asymmetric and symmetric photometric distributions CHARACTERISTICS - FLOODLIGHTS Tightness level: IP 67 (*) Impact resistance (glass): IK 10 (**) Static load resistance: 2000 kg (*) Nominal voltage: 230 V - AC Electrical class: II (*) Weight: Midi Maxi with kit 7.15 kg 10.95 kg without kit 5.15 kg 7.95 kg Power: Midi Maxi mono 35 W 40 W RGB 20 W 40 W (*) according to standard IEC - EN 60598 (**) according to standard IEC - EN 62262 BENEFITS Numerous asymmetric and symmetric photometric distributions Photometry adjustable by ±5 on site IP67 tightness level Discreet integration into the environment Two sizes Robust mechanical design: aluminium, stainless steel and tempered glass Static or dynamic, monochromatic or RGB model A single electrical connection to complete for installation Once installed, Rocca floodlights can be directed and tilted to refine the photometric setting on the target. Rocca floodlights are delivered with a pre-fitted power cable and should not be disturbed during installation, in order to maintain watertightness. An aluminium alloy body with a brushed stainless steel finishing crown protects the optical compartment. The tempered, sandblasted high-strength 15 mm glass protector is capable of withstanding a static load of 2,000 kg. The power supply is placed in an IP67 weatherproof box under the body of the floodlight, protected by the synthetic installation kit. In the event of accidental overheating, the current powering the LEDs is automatically cut off so as to protect the electronic components. An optimum heat dissipation enables Rocca floodlights to maintain a luminous flux equivalent to 70% of their initial value, after 60,000 hours of operation, at an average ambient temperature of 35 C. Colour: brushed stainless steel MODELS Floodlight with or without photometric distribution adjustment on site Asymmetric or symmetric photometry
ROBUSTNESS AND DISCREET INTEGRATION A well thought-out design, combined with quality materials such as stainless steel, aluminium and tempered glass, guarantees robustness appropriate for the use of floodlights in an urban environment. The resistance of Rocca floodlights is such that they can support a static load of 2,000 kg. NUMEROUS PHOTOMETRIC MODELS Rocca ground-recessed floodlights are available in a range of models: Asymmetric: three distributions (intensive, semi-intensive and extensive) enable a vertical surface to be illuminated uniformly from the base, to various heights, depending on the distance of the installation from the facade; Symmetric: the LEDs can be fitted with 4 types of lens depending on the desired photometric distribution: very narrow beam, narrow beam, medium beam, wide beam. These various photometric models also allow for a choice of light: monochromatic with 15 or 30 white (cool,neutral, warm), red, green or blue high power LEDs; RGB with 3 x 5 or 3 x 10 high power LEDs. The floodlights are also available in static or dynamic models. The dynamic model, controlled via DMX protocol, allows for chromatic variations (RGB) and intensity variations (monochromatic or RGB). ON SITE ADJUSTMENT A screw enables the angle of the photometric distribution to be precisely adjusted by an angle of ±5 on site, without opening the floodlight. This mechanical design facilitates flexible installation and use whilst maintaining the IP 67 tightness level over time. EASY INSTALLATION The wide base of the installation kit facilitates stable positioning of the floodlight in the ground, whilst enabling passage and support of the sole power supply cable (voltage and DMX signal). Rocca floodlights are supplied with a power cable, enabling a single connection from their base. The installation kit also contains a levelling system, which closes off the cavity prepared to accept the floodlight whilst waiting for it to be installed. Thereby, the dedicated void is protected from construction materials (gravel, concrete, sand etc) entering. rocca
E rocca INSTALLATION DIMENSIONS Intended for flexible installation, Rocca can be installed into any type of ground. The floodlight's crown has been adapted to: - be integrated level in a concrete floor - overhang the ground level slightly in the case of a paved floor and can hide irregular installation hole edges. Midi Maxi D Diameter of the crown Concrete model 220 mm 270 mm Paving model 240 mm 290 mm H Total installation height 450 mm 450 mm A A Floodlight height Asymmetric model: swivelling 113 mm 116 mm non-swivelling 90 mm 92 mm Symmetric model: swivelling 90 mm 90 mm non-swivelling 88 mm 86 mm B Height of base of kit 210 mm 210 mm C Length of base of kit 375 mm 375 mm E Width of base of kit 322 mm 322 mm D D B B H H A A ROCCA MIDI CONCRETE FINISHING ROCCA MAXI - PAVED FINISHING 1 single connection to complete, in order to connect the floodlight with the network power cable. D D A A C SWIVELLING MODEL NON-SWIVELLING MODEL BASE OF INSTALLATION KIT
LIGHT SOURCES High power LED Monochromatic RGB Type Midi Maxi Cree XP-E Cree XP-E Power / LED Midi Maxi 1,2 W 1,2 W Number of LEDs Midi Maxi 15 30 15 30 Colours Midi Maxi White / Red / Green / Blue Red / Green / Blue Temperature of white LEDs Midi Maxi Cool 6000 K Neutral 4500 K Warm 3500 K Luminous efficacy: to follow the evolution of the luminous efficacy of LEDs used in Rocca floodlights, please visit our website; the LEDs used being likely to change with the constant and rapid progress of this technology. ASYMMETRIC PHOTOMETRIC DISTRIBUTIONS The installation distance between the Rocca ground-recessed floodlight and the wall surface to illuminate varies depending on the height to be illuminated. Intensive model Semi-intensive model Extensive model LED optic 6150 LED optic 6150 LED optic 6150 320 480 240 400 160 253 380 190 317 127 247 370 185 308 123 8m 8m 8m 480 380 370 400 317 308 320 253 247 240 190 185 160 127 123 80 63 62 75 6 45 3 15 15 3 45 6 75 75 6 45 3 15 15 3 45 6 75 75 6 45 3 15 15 3 45 6 75 1 / 5 / 10 / 20 / 30 / 40 / 50 lux (*) Photometric data with cold white (6000 K). Please contact us for additional configurations. d = 0,17 * h d = 0,33 * h d = 0,50 * h d: distance between the lighting and the wall surface to illuminate h: height of the wall surface to illuminate h h h d d d rocca
rocca SYMMETRIC PHOTOMETRIC DISTRIBUTIONS very narrow beam - 8 narrow beam - 11 medium beam - 28 wide beam - 42 LED optic 6145 LED optic 6145 LED optic 6145 LED optic 6145 2067 3100 1550 1667 2500 1250 2083 833 1067 1600 800 1333 267 2583 1033 560 840 420 700 280 4m 4m 4m 4m 3100 2500 1600 840 2583 2083 1333 700 2067 1667 1067 560 1550 1250 800 420 1033 833 533 280 517 417 267 140 75 6 45 3 15 15 3 45 6 75 75 6 45 3 15 15 3 45 6 75 75 6 45 3 15 15 3 45 6 75 75 6 45 3 15 15 3 45 6 75 1 / 5 / 10 / 50 / 100 / 200 / 500 / 1000 / 2000 lux (*) Photometric data with cold white (6000 K). Please contact us for additional configurations.
rocca
51114-Rocca-br-2010-03-AN LA LUMIÈRE by Schréder Copyright Schréder S.A. 2010 The information, descriptions and illustrations given above are meant as a guideline only. As we are constantly improving our products, we may modify without notice their characteristics and features. These may differ from country to country. Please ask for further information. www.schreder.com