LUMELEX 2030 SERIES 120V/2V XICATO 19MM These LED Cylinder units offer high functionality in LSI s smallest, sleekest package. Shown with optional Cross Baffle accessory Designed for the most versatile Xicato XTM 19mm LED module up to 1 Watts Extremely tight color consistency (less than 2 MacAdam Ellipses) System efficiency up to 0 lumens/watt 0,000 hour life to 0% lumen output, L0 at 9 F max ambient Field interchangeable optics (1 -- 0 ) modify the beam spread distribution Choice of color temperature Color Rendering Index (CRI) of either 9 (high) or 3 (standard) Choice of lumen outputs (delivered lumens) Tested to LM9 and LM0 Protocols, TM-30 available Hidden integral electronic driver compatible with reverse phase (ELV compatible) dimmers down to % Integral Dimming with built-in potentiometer also available, dimming down to 1% Accessory holder accepts up to two size-aaa LSI filters and accessories Self and wrench locking stem for vertical and horizontal focusing Sturdy die-cast aluminum housing No UV or IR emissions; no mercury or lead On/off safety switch (on 0E track fitting) Finishes: LSI Black, White, and Silver Fixture weight: 2 lbs All modules are field replaceable FIXTURE PART NUMBERS Please review the ORDERING INFORMATION section on the next page as well as the MOUNTING OPTIONS on page 3 to create a part number for each fixture that specifies the following: LED Module LED Rating Color Temperature Optic - mm/beam spread Dimming Voltage Finish PART NUMBER LX2030 DIMMING FITTING OPTIC COLOR TEMP LED RATING LED MODULE FINISH VOLTAGE Example Part Number: LX2030-T19-930S1-0E-TE120W is a fixture with a Xicato 19mm LED module, 0 Lumen/9 CRI/13 Watt LED rating, 3000 K Color Temperature, 0mm 1 Optic, 0E Track fitting with Trailing Edge group dimming capability, 120V and a White finish. 01/19 www.lightingservicesinc.com LumeLEX 1
LUMELEX 2030 SERIES 120V/2V XICATO 19MM 2 /1 9mm 1/1 129mm 2 /1 9mm XTM 19MM ORDERING INFORMATION (INTEGRAL DIMMING) Base Fixture Model LX2030-T19 (XTM 19mm) LED Rating (Lumens/CRI/Wattage) 0-9 = 00/9/ -3 = 00/3/ Color Temperature 2= 200K 30= 3000K 3= 300K 0= 000K Optic S1 = 0mm/ 1 S = 0mm/ 0 Fitting/Controls (Dimming) 0E-ED = Track Fitting with Integral Dimming (1%) Voltage 120 = 120V 230 = 220-20V Finish B = Black W = White S = Silver Example Part Number: LX2030-T19 0-9 30 S1 0E-ED 120 W FIXTURE MODEL LED COLOR OPTIC FITTING/ VOLTAGE FINISH RATING TEMP DIMMING XTM 19MM ORDERING INFORMATION (EXTERNAL SYSTEM DIMMING) Base Fixture Model LX2030-T19 (XTM 19mm) LED Rating (Lumens/CRI/Wattage) -9 = 0/9/13 1-3 = 0/3/1 Color Temperature 2= 200K 30= 3000K 3= 300K 0= 000K Optic S1 = 0mm/ 1 S = 0mm/ 0 Fitting/Controls (Dimming) 0E-TE = Track Fitting & Trailing Edge (%) EF-TE = Security/Worklight Track Fitting & Trailing Edge (%) E-TE = Canopy Fitting & Trailing Edge (%) Voltage 120 = 120V 230 = 220-20V 2 = 2V Finish B = Black W = White S = Silver Example Part Number: LX2030-T19-9 30 S1 0E-TE 120 W FIXTURE MODEL LED COLOR OPTIC FITTING/ VOLTAGE FINISH RATING TEMP DIMMING Color Temperature & Center Point Tolerance Color Temp Center Point Tolerance 200K 200K +/- 0K 3000K 290K +/- 0K 300K 320K +/- 0K 000K 000K +/- 0K Chromaticity Specifications R g - Gamut LED R a - CRI R f - Fidelity Area T19-TS9-3 3 1 T19-TS9-9 9 9 3 Other Options (Consult Factory): Custom Stems, specify length ( - ) Custom Finish, RAL palette 01/19 www.lightingservicesinc.com LumeLEX 2
LUMELEX 2030 XICATO 19MM MOUNTING OPTIONS FITTING SIDE VIEW STEM LENGTH VIEW 0E Track Fitting/ EF Security/Worklight Fitting 9/1" 1mm /1" 21mm 3 3/1" 1mm " 12mm 1/" 2mm 0E-ED Track Fitting with Integral Dimmer (120V and 230V only) 1 1/" 29mm 2 /" mm Integral Dimmer 3 3/1" 1mm LED DRIVER E Canopy Fitting /1" mm CEILING CEILING " 12mm " 12mm 2 /" mm 01/19 www.lightingservicesinc.com LumeLEX 3
LUMELEX 2030 XICATO 19MM PERFORMANCE The performance characteristics of the LumeLEX family of products can be customized based on the LED module and the optic (reflector) selected. Each available LED module is defined by four characteristics the color rendering index (CRI), the correlated color temperature (CCT), the power that it uses (watts), and its available lumens. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. In the LSI part number, the LED module is specified with a range of numbers that immediately follow the product series number. For example, in the part number LX2030-T191-32S1-0E-TE120B, the T191-32 represents an LED module with an output of 0 lumens, a CRI of 3, a power usage of 1 watts and a color temperature of 200K. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the S1 in LX2030-T191-32S1-0E-TE120B is a 0mm diameter optic that has a 1-Degree beam. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. Integral Dimming External System Dimming Integral Dimming External System Dimming Integral Dimming External System Dimming CBCP = Center Beam Candle Power LED Rating Optic (Reflector) Lumens/CRI/Wattage S1 S 0/9/ 21 122 00/3/ 319 1 0/9/13 301 0/3/1 30 2 Delivered Lumens LED Rating Optic (Reflector) Lumens/CRI/Wattage S1 S 0/9/ 23 3 00/3/ 3 2 0/9/13 329 2 0/3/1 0 3 Efficacy = Lumens Per Watt LED Rating Optic (Reflector) Lumens/CRI/Wattage S1 S 0/9/ 1 29 00/3/ 2 39 0/9/13 2 1 0/3/1 3 LED Module Integral Dimming External System Dimming Lumens/CRI/Wattage 0/9/ 0/3/ 0/9/13 0/3/1 SKU Code 0-9 -3-9 1-3 Nominal Fixture Power (+/- 20%), Watts Maximum Inrush Current Amps 13 1 Minimum Power Factor 0.90 0.90 0.90 0.90 Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-09. 01/19 www.lightingservicesinc.com LumeLEX
LUMELEX 2030 XICATO 19MM OPTICS 2 1/ (mm) LX-S1-REF-B (S1) (0mm/1 ) Anti-reflective coated aspheric lens. Tool-less, twist and lock installation. Black Finish. 2 1/1 (2mm) 1 1/ (2mm) 1 1/1 (9mm) LX-S0-REF-CLR (S) (9mm/0 ) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. Aluminized Finish. 01/19 www.lightingservicesinc.com LumeLEX
LUMELEX 2030 XICATO 19MM PHOTOMETRIC DATA LED RATING: 1-3 External System Dimming S1-0mm DIA Optic Beam Spread (minimum) 1 Center Beam Candlepower 30 CRI 3 S-9mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower 2 CRI 3 LED RATING: -3 Integral Dimming S1-0mm DIA Optic Beam Spread (minimum) 1 Center Beam Candlepower 319 CRI 3 S-9mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower 1 CRI 3 EXTERNAL SYSTEM DIMMING All Distances in Feet All Max. Footcandles at 0 Beam Axis S (0 ) 2 3 23 19 2 1 2 0 31 2 21 1 1 13 9 S1 (1 ) 30 9 29 12 120 3 3 3 30 2 22 19 1 1 13 12 9 2 0 2 1 2 3 9 12 13 1 1 1 1 1 19 20 21 22 23 2 2 Photometric Data based on LED Rating: 1-3 (0 Lumens/3CRI/1watts) INTEGRAL DIMMING All Distances in Feet All Max. Footcandles at 0 Beam Axis S (0 ) 1 20 2 3 29 23 19 1 13 3 3 S1 (1 ) 319 90 31 19 12 9 39 32 2 22 19 1 1 12 9 2 0 2 1 2 3 9 12 13 1 1 1 1 1 19 20 21 22 23 2 2 Photometric Data based on LED Rating: -3 (00 Lumens/3CRI/watts) 01/19 www.lightingservicesinc.com LumeLEX
LUMELEX 2030 ACCESSORIES SPREAD LENSES AND BEAM SOFTENER % of Light No. Description Transmission AAA990 Spread Lens/Clear 3 ( X 0 ) AAA992 Spread Lens/Clear ( X 30 ) AAA99 Spread Lens/Clear 3 (0 X 0 ) AAA99 Spread Lens/Clear ( X 0 ) AAA99 Beam Softener/Clear 0 ( X ) 1 LIGHT BLOCKING SCREENS AAA Stainless steel mesh screens used alone or in combinations will block from approximately 20% to 90% of the transmitted light without changing color temperature of the light. No. % of Light Blocked AAA01S 20 AAA02S 30 AAA03S 0 LOUVER HEX AAA 1/ thick Hexcell black metal louver used for thin profile. Black finish. BACKER RING AAAB Aluminum ring to hold thin film gels when no other size AAA accessories are being used. LX2031FR WALL WASH CYLINDER HOUSING which includes slash front, accessory cartridge, spread gel ( x ) and kicker reflector (for use with 0 optic only). CROSS BAFFLE LX2030 Controls spill light and glare. Black finish. 1. Figures vary based upon LED module/optic being used and relationship of screen(s) to LED module/optic and to each other. 01/19 www.lightingservicesinc.com LumeLEX
LUMELEX 2030 GELS As the foremost innovator in accent lighting, LSI offers a complete range of pre-cut Gels to modify the spread and color of light for the LumeLEX LED Series. LumeLEX SPREAD GELS Size: AAA (0 mm diameter) Spread Gel GEL L1 AAAB 1 Spread Gel GEL L AAAB Spread Gel GEL L AAAB Spread Gel GEL L20 AAAB 20 Spread Gel GEL L30 AAAB 30 Spread Gel GEL L0 AAAB 0 Spread Gel GEL L0 AAAB 0 Spread Gel GEL L0 AAAB 0 Spread Gel GEL L30B AAAB 30 by Spread Gel GEL L0B2 AAAB 0 by 0.2 Spread Gel GEL L0B1 AAAB 0 by 1 Spread Gel GEL L0B AAAB 0 by Spread Gel GEL LB AAAB by Spread Gel GEL L90B0 AAAB 90 by 0 Spread Gel GEL R1 AAAB Beam Softener LumeLEX COLOR GELS Size: AAA % of Light (0 mm diameter) Gel Color Transmission GEL R2 AAAB Bastard Amber GEL R AAAB Pale Yellow 9 GEL R12 AAAB Straw GEL R13 AAAB Straw Tint GEL R1 AAAB Medium Straw GEL R21 AAAB Golden Amber 3 GEL R2 AAAB Orange Red 1 GEL R2 AAAB Light Red 12 GEL R2 AAAB Medium Red GEL R AAAB Lavender 2 GEL R2 AAAB Booster Blue GEL R1 AAAB Sea Blue 30 GEL R2 AAAB Azure Blue GEL R91 AAAB Primary Green GEL R9 AAAB Light Grey 0 GEL R9 AAAB Medium Grey 2 GEL R1 AAAB Light Frost N/A GEL R AAAB Tough Silk N/A GEL R9 AAAB Lt. Hamburg Frost N/A GEL R121 AAAB Blue Diffusion N/A GEL R30 AAAB Rose Gold Size: AAA % of Light (0 mm diameter) Gel Color Transmission GEL R312 AAAB Canary GEL R320 AAAB Half Blue 2 GEL R331 AAAB Shell Pink GEL R33 AAAB Sapphire Blue GEL R39 AAAB Pale Grey 0 GEL R2001 AAAB Storaro Red 12 GEL R200 AAAB Storaro Green 1 GEL R2009 AAAB Storaro Violet 3 GEL R3202 AAAB Full Blue 3 GEL R320 AAAB Third Blue GEL R321 AAAB Eighth Blue (Boosts 3200K to 3300K) 1 GEL R331 AAAB Tough 1/ Minusgreen 9 GEL R3 AAAB Roscosun (1/ CTO) (Reduces 00K to 900K) 92 GEL R31 AAAB Full Straw (CTS) 0 GEL R33 AAAB Quarter Straw (CTS) 1 GEL R330 AAAB CalColor 30 Cyan 3 GEL R1 AAAB CalColor 1 Green GEL R90 AAAB CalColor 90 Green 2 GEL R0 AAAB CalColor 0 Pink GEL R90 AAAB CalColor 90 Pink 3 GEL R930 AAAB CalColor 30 Lavender * Backer Ring AAAB required to hold gels when no other rimmed AAA accesories are used. LSI ROSCO GEL CCT CONVERSION CHART FROM 3000K Type ROSCO # ROSCO Description Resulting CCT 320 Double CTO 131 30 Sun CTO 1999 301 Sun 21 3 Sun 3/ CTO 21 30 Sun 1/2 CTO 21 309 Sun 1/ CTO 2 3 Sun 1/ CTO 230 3 UV Filter 2930 3220 Double Blue N/A 3202 Full Blue 92 3203 Three-Quarter Blue 2 320 Half Blue 39 320 Third Blue 31 320 Quarter Blue 329 321 Eighth Blue 32 Amber Filters Lower CCT Blue Filters Raise CCT 01/19 www.lightingservicesinc.com LumeLEX
COLOR MEDIA COLOR FILTERS As the foremost innovator in accent lighting, LSI offers a complete range of permanent fade-free glass color filters, which are available in nine stock diameters. All glass color filters are rimmed in a seamless aluminum ring and are slotted for heat expansion. Size Diameter LSI Fixture Series AAA 2 3/ LumeLEX 2020/2030/2031/203, SSLCX1, SSL20, LumeLEX MAR-S AA 3 LumeLEX 202 (with LX202-Holder or LX202-Barndoor), LumeLEX 202, LumeLEX 20, LumeLEX 20 A 3 1/2 LumeLEX 200, SSL230, SSLCX30, SSLGR30CL, SSLGR3 B 1/ LumeLEX MAR-L C 3/ LumeLEX 20, LumeLEX 20, SSL23, SSLCX3, SSLCX3, SSLGR3CL 1 % of Light No. Color Transmission 902 Medium Pink 3 903 Deep Pink 3 90 Flesh Pink 3 90 Pale Lavender 1 90 Surprise Pink 19 90 Lilac 21 9 Warm Red 9 Strawberry 912 Ruby 913 Magenta 1 91 Light Amethyst 2 91 Medium Amethyst 1 91 Deep Amethyst 91 Olive 1 91 Light Green 920 Medium Green 2 921 Deep Green 922 Silver green 923 Yellow Green 9 92 Emerald Green 12 92 Light Turquoise 92 Medium Turquoise 0 92 Deep Turquoise 1 92 Light Blue 3 930 Medium Blue 3 932 Daylight 9 933 Gene Moore Blue 1 93 Grey 93 Light Blue Green 1 939 Light Amber 90 Medium Amber 91 Deep Amber 3 92 Straw 93 Gold 9 Canary Yellow 9 Lemon 1 9 Pumpkin 32 9 Tangerine 20 9 Orange 23 99 Pink Gold 90 Bronze 91 Brass 92 Autumn Tan 93 Leaf Brown 19 9 Butter Pecan 3 9 Toasted Almond 1 Notes: 1. Values given are approximate due to slight variations in glass color and thickness. 01/19 www.lightingservicesinc.com LumeLEX 9
COLOR MEDIA DICHROIC COLOR FILTERS In addition to our complete line of glass color filters, LSI now offers dichroic glass color filters that achieve purer, more saturated, richer color by selective wavelength transmission. Since these filters reflect rather than absorb the unwanted color wavelengths, a higher intensity of colored light can be obtained with fewer or lower wattage fixtures. In addition, this selective transmission allows for very accurate color matching from filter to filter. All standard LSI filter sizes are available in a wide palette of well chosen dichroic colors that can be used with all LSI fixtures that accept accessories. LSI dichroic glass color filters have the added benefit of being rimmed for extra durability to allow for frequent usage without fear of breakage or edge chipping. Size Diameter LSI Fixture Series AAA 2 3/ LumeLEX 2020/2030/2031/203, SSLCX1, SSL20, LumeLEX MAR-S AA 3 LumeLEX 202 (with LX202-Holder or LX202-Barndoor), LumeLEX 202, LumeLEX 20, LumeLEX 20 A 3 1/2 LumeLEX 200, SSL230, SSLCX30, SSLGR30CL, SSLGR3 B 1/ LumeLEX MAR-L C 3/ LumeLEX 20, LumeLEX 20, SSL23, SSLCX3, SSLCX3, SSLGR3CL Technical Data Dichroic color filters are created in a vacuum chamber by multi-layer vapor deposits of different minerals onto low expansion, chemically resistant Borosilicate glass. Deposits are made in alternating layers of varying microscopic thickness which allow very narrow color wavelengths to be selectively transmitted and all other wavelengths to be reflected. LSI does not recommend using dichroic color filters with lamps or fixtures that have beam spreads greater than 0 because a secondary color aura is created by the wide angular transmitted wavelengths that are different than the desired color wavelength. Since there is mainly transmission and reflection of the color wavelengths by the dichroic filter and very little absorption, the dichroic filter can be used with many high temperature lights that normally would not accept color filters. % of Light No. Color Transmission 2001 Light Pink 9 2002 Medium Pink 3 2003 Hot Pink 200 Pale Pink 20 Deep Magenta 29 20 Lavender 2 2012 Vivid Magenta 31 2013 Lavender Accent 201 Lilac 3 201 Purple Fusion 12 2020 Sky Blue 39 2021 Sea Blue 39 2022 Cyan 33 2023 Light Blue Green 30 202 Primary Blue 2 202 Medium Red Blue 1 202 Deep Purple 1 202 Peacock Blue 3 202 Mediterranean Blue 20 2029 Boost Blue 1 200 Light Yellow Green 201 Fern Green 202 Turquoise 3 203 Primary Green 31 20 Industrial Green 200 Yellow 0 201 Amber 1 202 Amber Blush 3 203 Bastard Amber 1 20 Goldenrod 3 20 Bright Straw 200 Medium Orange 1 201 Orange 200 Flame Red 2 201 Primary Red 2 01/19 www.lightingservicesinc.com LumeLEX