LUMELEX 2044 SERIES 0/2V LED DIM TO WARM CONTROL Elegant fixture designed specifically for the most demanding architecture applications. Designed for a Dim to Warm module up to 22 watts Natural dimming that approximates the black body curve System efficiency up to lumens/watt 3,000 hour life to 0% lumen output, L0 at F max ambient Halogen mimicking color from 2800 K to 2000 K Color Rendering Index (CRI) of 2 min. at all dimming settings Color Fidelity (R f ) 2 Gamut Area Index (R g ) 2 Lumen output: 1800 Lumens Proprietary mixing optics for smooth even light Tested to LM and LM80 Protocols, TM-30 available 0-V dimming allows for 2 zones of control on one circuit CONTROLTrack down to % DMX compatible with dimming below 1% Field interchangeable optics (20-0 ) modify the beam spread distribution Accessory holder accepts up to two size-aa LSI filters and accessories Finishes: LSI Black, White, and Silver Fixture weight: 3. lbs All modules are field replaceable FIXTURE PART NUMBERS Please review the ORDERING INFORMATION section on the next page as well as the MOUNTING OPTIONS on page 3 to create a part number for each fixture that specifies the following: LED Module LED Rating Color Temperature Optic (mm/beam spread) Fitting (Mounting Option) Dimming Voltage Finish PART NUMBER LX2044 FINISH VOLTAGE DIMMING FITTING OPTIC COLOR TEMP LED RATING LED MODULE Example Part Number: LX2044-D18-2DWW2-CT3-DX0W is a fixture with a Dim to Warm LED module, 1800 Lumen/2 CRI/22 Watt LED rating, 2800-2000 K Color Temperature, 2mm 20 Color Mixing Optic, CT3 CONTROLTrack fitting with DMX Address knobs and DMX compatible control gear, 0V and a White finish. 11/18 www.lightingservicesinc.com LumeLEX 1
LUMELEX 2044 SERIES 0/2V LED DIM TO WARM CONTROL 2 /1 mm (Stem only) DIM TO WARM ORDERING INFORMATION Base Fixture Model LX2044-D (Dim to Warm) LED Rating (Lumens/CRI/Wattage) 18-2 = 1800/2/22 1/4 20mm Color Temperature DW= 2800K to 2000K Optic W2 = 2mm/ 20 Color Mixing W3 = 2mm/ 30 Color Mixing W4 = 2mm/ 40 Color Mixing W = 2mm/ 0 Color Mixing WR = 2mm/ Color Mixing & Field Reducer Fitting/Controls (Dimming) CT1- = CONTROLTrack Fitting & 0-V (%) CT3-DX = CONTROLTrack Fitting & DMX (<1%) 4 3/1 DIA mm Voltage 0 = 0V 230 = 220-240V 2 = 2V Finish B = Black W = White S = Silver Example Part Number: LX2044-D 18-2 DW W2 CT3-DX 0 W FIXTURE MODEL LED COLOR OPTIC FITTING/ VOLTAGE FINISH RATING TEMP DIMMING Other Options (Consult Factory): Chromaticity Specifications Custom Stems, specify length (4-48 ) Custom color, RAL palette R g - Gamut LED R a - CRI R f - Fidelity Area D 2 2 2 11/18 www.lightingservicesinc.com LumeLEX 2
LUMELEX 2044 DIM TO WARM MOUNTING OPTIONS CONTROL FITTING SIDE VIEW STEM LENGTH VIEW CT1 CONTROLTrack Fitting /8" 1mm /1" 22mm 3 3/1" 82mm /1" 201mm /1" 22mm CT3 CONTROLTrack Fitting 1 3/4" 44mm 4 /1" mm 11/18 www.lightingservicesinc.com LumeLEX 3
LUMELEX 2044 DIM TO WARM PERFORMANCE The performance characteristics of the Dim to Warm LumeLEX family of products can be customized based on the optic (reflector) selected. The behavior of the Dim to Warm modules links the color of the light to the dimmed output of the fixture just like a halogen or incandescent source. Therefore the four characteristics defining the color the color rendering index (CRI), the correlated color temperature (CCT) range, the power that it uses (watts), and its available lumens are linked to the dim setting. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. Also note that the CRI of this fixture is a minimum of 2 at any dimming setting. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LX2044-D18-2DWW2-00-TE0B, the D18-2DW represents a Dim to Warm LED module with an output of 1800 lumens, a CRI of 2, a power usage of 22 watts and a color temperature range of 2800K 2000K that is tied to the dimming setting. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the W2 in LX2044-D18-2DWW2-00-TE0B is a 0mm diameter optic that has a 20-Degree beam. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power LED Module Absolute range of values are +/- % of typical value, and are for all color temperatures Optic (Reflector) Lumens/CRI/Wattage W2 WR W3 W4 W 1800/2/22 30 4201 21 222 Delivered Lumens LED Module Optic (Reflector) Lumens/CRI/Wattage W2 WR W3 W4 W 1800/2/22 0 2 0 Efficiency = Lumens Per Watt LED Module Optic (Reflector) Lumens/CRI/Wattage W2 WR W3 W4 W 1800/2/22 23 LED Module Lumens/CRI/Wattage 1800/2/22 SKU Code 18-2 Nominal Fixture Power (+/- 20%), Watts 22 Maximum Inrush Current Amps Minimum Power Factor 0.2 Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-011. 11/18 www.lightingservicesinc.com LumeLEX 4
LUMELEX 2044 DIM TO WARM OPTICS 1 11/1 (44mm) 2 /1 (2mm) LX-W20-REF-CLR (W2) (2mm/20 ) Faceted reflectively coated metal optic. Tool-less twist and lock installation. Aluminized finish. 2 1/8 (3mm) 3 (mm) LX-WRD-REF-CLR (WR) (0mm/ ) Field reducer. Proprietary field reducing baffle (black) with aluminized reflector. Tool-less twist and lock installation. 1 11/1 (44mm) 2 /1 (2mm) LX-W30-REF-CLR (W3) (2mm/30 ) Faceted reflectively coated metal optic. Tool-less twist and lock installation. Aluminized finish. 1 11/1 (44mm) 2 /1 (2mm) LX-W40-REF-CLR (W4) (2mm/40 ) Faceted reflectively coated metal optic. Tool-less twist and lock installation. Aluminized finish. 1 11/1 (44mm) LX-W0-REF-CLR (W) (2mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and lock installation. Aluminized finish. 2 /1 (2mm) 11/18 www.lightingservicesinc.com LumeLEX
LUMELEX 2044 DIM TO WARM PHOTOMETRIC DATA LED RATING: 18-2 W2-2mm DIA Optic Beam Spread (minimum) 20 Center Beam Candlepower 30 WR-0mm DIA Optic Beam Spread (minimum) (FR: Field Reducer) Center Beam Candlepower 2 W3-2mm DIA Optic Beam Spread (minimum) 30 Center Beam Candlepower 4201 W4-2mm DIA Optic Beam Spread (minimum) 40 Center Beam Candlepower 21 W-2mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower 222 LED RATING: -2 W (0 ) 222 3 143 2 4 4 3 28 23 1 1 14 8 4 4 4 All Max. Footcandles at 0 Beam Axis W4 (40 ) 21 48 332 18 0 83 1 4 3 30 21 18 8 W3 (30 ) 4201 0 4 23 18 11 8 2 42 3 2 21 1 1 11 8 WR ( ) FR 2 3 1 348 223 114 8 4 3 33 28 22 1 1 14 11 W2 (20 ) 30 1838 81 4 24 204 0 1 1 4 1 1 43 38 33 2 23 20 18 1 14 All Distances in Feet 4 2 0 2 4 1 2 3 4 8 11 14 1 1 18 1 20 21 22 23 24 Photometric Data based on LED Rating: 18-2 (1800 Lumens/2CRI/22watts) 11/18 www.lightingservicesinc.com LumeLEX
LUMELEX 2044 ACCESSORIES SPREAD LENSES AND BEAM SOFTENER % of Light No. Description Transmission AA0 Spread Lens/Clear 83 ( X 0 ) AA2 Spread Lens/Clear 8 ( X 30 ) AA Spread Lens/Clear 83 (0 X 0 ) AA Spread Lens/Clear 8 (4 X 0 ) AA8 Beam Softener/Clear 80 (4 X 4 ) BACKER RING AAB Aluminum ring to hold gel when no other size AA accessories is being used. Black finsih. 1 LIGHT BLOCKING SCREENS AA Stainless steel mesh screens used alone or in combinations will block from approximately 20% to 0% of the transmitted light without changing color temperature of the light LOUVER HEX AA 1/8 thick Hexcell black metal louver used for thin profile. Black finsih. No. % of Light Blocked AA801S 20 AA802S 30 AA803S 40 1. Figures vary based upon LED Module/Optic being used and relationship of screen(s) to LED Module/Optic and to each other. 11/18 www.lightingservicesinc.com LumeLEX
LUMELEX 2044 GELS As the foremost innovator in accent lighting, LSI offers a complete range of pre-cut Gels to modify the spread and color of light for the LumeLEX LED Series. LumeLEX SPREAD GELS Size: AA ( mm diameter) Spread Gel GEL L1 AA 1 Spread Gel GEL L AA Spread Gel GEL L AA Spread Gel GEL L20 AA 20 Spread Gel GEL L30 AA 30 Spread Gel GEL L40 AA 40 Spread Gel GEL L0 AA 0 Spread Gel GEL L80 AA 80 Spread Gel GEL L30B AA 30 by Spread Gel GEL L40B2 AA 40 by 0.2 Spread Gel GEL L0B1 AA 0 by 1 Spread Gel GEL L0B AA 0 by Spread Gel GEL LB4 AA by 4 Spread Gel GEL L0B0 AA 0 by 0 Spread Gel GEL R1 AA Beam Softener 11/18 www.lightingservicesinc.com LumeLEX 8