Style Comfort Elegance Moulding Selection Guide $5 2010 www.mouldingandmillwork.com
Table of Contents 1 Illustration/Glossary 3 8 3 Moulding Gallery 13 FinTek 19 Green Building Initiative 20 Spero Eco-wise MDF 1 26 Ultralite Supercoat MDF 48 Primed FJ Pine 60 Poplar 5 64 VG Douglas Fir 70 Hemlock 78 Oak 82 Sheet Goods S4S & Wainscot 87 Corporate Map 88 AraucoPly Sanded ACX Pine 6 4 Pieces Random Length Bundle Count 410 BDL 11/16 x 2-1/4 Hemlock 8 11/16 x 2-1/4 Ultralite RL 11/16 x 2-1/4 LDF Primed PCS 10 9 7 Profile Profile Sizes Profile Species 2 1 2 3 4 5 6 7 8 9 10 ARCHITRAVES: In cl assical architecture, it described the main beam resting on the tops of the columns. Today it is often used as a decorative moulding for ornamentation or finishing at the top of windows and doors. BASEBOARDS: Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. BUILD-UPS: Combining two or more moulding profiles to create a new or custom look. Also called stacking, build-ups make it easy to create the look of custom made trimwork without the high cost. CASING: Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. CROWNS: Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room. FINISH BOARDS: Finish Boards come in either S4S (Surfaced 4 Sides) or S3S (Surfaced 3 Sides) and are used for a multitude of purposes including shelving, window liner, bases, casing, etc. PANEL MOULDS: Panel Moulds are used to frame wall paneling and add an accent to your walls. Often used in furniture construction. RAKE MOULD: Rakes are often used as crowns. In fact, they are sometimes called solid crowns. WAINSCOT: Trimwork installed in the area below a chair rail. Numerous options are available including raised panel, shadow box and beaded. Combined with a chair rail and baseboard, Wainscoting creates a dramatic look to any room. WINDOW STOOL: Also called window sill, a Window Stool is the surface installed below the sash of a window. Trim installed under window stool creates a distinctive look and adds a decorative touch. GLOSSARY OF TERMS BASE SHOES: Base shoes are primarily used to trim flooring materials and are often used in combination with a traditional baseboard to conceal variations between the flooring and the base. However, this versatile profile works great to solve numerous trimming needs. BATTENS/OPEN TRIM: A Batten/Open Trim is a narrow strip of wood used to cover joints or as decorative vertical members over plywood or wide boards. BEADED CEILING: A popular profile used often as wainscot paneling. Combined with a chair rail or cap mould and a baseboard, beaded ceiling makes a distinctive wainscot package. BRICKMOULDS: A Brickmould is mainly used as exterior casing around doors. 2 inches is the most common size, however, 1-1/2 and 1-1/4 inch sizes are available. Brickmoulds can also be used in place of a crown, and as a transition under window sills. BULLNOSE: A term used to describe the eased edges of trim and stops. A single bullnose stop would have one eased edge and a square edge back. A double bull nose stop would have two eased edges. CHAIR RAILS: Chair Rails are practical as well as decorative. Applied to a wall, from 24 to 48 inches up from the floor, they protect the wall from scuffs and dents from the backs of chairs as well as adding a beautiful accent to any room. CORNERS: Corners are used to protect the outside edges of the wall from damage and abrasion. Corners come in a wide variety of sizes and detailing. COVES: Coves are commonly used to soften the transition on inside corners but may be used for a wide range of applications. DENTIL: A moulding pattern with a series of closely spaced rectangular blocks and spaces. Used especially in classic architecture. DOOR STOPS: The Door Stop mouldings are attached to the door jamb on both sides and at the top. It is where the door comes to a rest when it is closed stopping the door from moving any further, and covering the gap that would otherwise appear between the door and the jambs. FULL ROUNDS: Full Rounds are used for numerous purposes and projects. Some of the more common uses are closet poles, curtain rods and towel rods. HALF ROUNDS: A cross section of a Half Round looks like a half circle and is used primarily as decorative trim. It works well as a trim piece for wall paper or to add a decorative pattern to flat panels. This profile can also be used to put a rounded edge on various shelving. HANDRAILS: Handrails provide safety and support. QUARTER ROUNDS: Quarter Rounds come in several sizes and serve a variety of functions. They are most often used with baseboards. RETURN: Term used to indicate the method of carrying a mouldings detail from the front of the moulding back to the wall. Generally a 45 degree cut is made to the front of the long moulding and an opposite 45 is cut on a small piece to carry the detail to the wall. SCREEN MOULD: A very versatile profile; Screen Mould fits a wide variety of needs and uses. Traditionally used to hold mesh screening into wood screens, it also works well as edge trim on various shelving or wood trim for wall paper etc.
Ceiling Trim Wall Trim 1 2 3 4 5 1 - BASEBOARD = 161 2 - CROWN = 41 3 - BASEBOARD = 161 4 - CHAIR RAIL = 297 5 - WAINSCOT CAP = 850 6 - BASEBOARD = 163 Door & Window Trim 1 MOULDING GALLERY Mantel Trim 2 6 Door & Floor Trim 1 - CASING = 535 2 - CROWN BUILDUP = 184 3 - CROWN BUILDUP = 712 4 - CROWN BUILDUP = 409 5 - OPENING TRIM = 9532 3 4 5
Moulding Gallery 1 1 2 3 4 2 5 3 6 7 1 - CROWN = MFPU47 2 - BASEBOARD = MFPU618 3 - LATTICE = MP3296 4 - RAKE MOULD = MP3244 5 - S4S = MFPU104 6 - BASEBOARD = MFPU618 7 - STOP = MP3290 4 5 1 - CROWN = MFPU43 2 - ARCHITRAVE = MFPU5010 3 - S4S = MFPU492 4 - BASEBOARD = MFPU161 5 - PLINTH BLOCK = PRMPB3436
1 Moulding Gallery 2 1 3 4 5 2 6 7 3 8 1 - CROWN = MFPU41 2 - BED MOULD = MFPU51 / S4S = MFPU106 3 - PANEL MOULD = MFP9532 4 - CASING = MFPU003 5 - S4S = MFPU106 6 - CHAIR RAIL = MFP850 7 - BEADED PLYWOOD = MFP222 8 - BASEBOARD = MFPU108 5 4 1 - CROWN = MFPU43 2 - ARCHITRAVE = MFPU5030 3 - S4S = MFPU104 4 - PLINTH BLOCK = PRMPB3436 5 - BASEBOARD = MFPU163
Moulding Gallery 1 2 1 4 3 2 5 4 3 6 7 1 - CROWN = 512 2 - BASEBOARD = 497 3 - CROWN = 3248 4 - S4S = 105 5 - CASING = 433 6 - CASING =433 7 - BASEBOARD = 497 6 5 1 - CROWN = 45 2 - CASING = 003 3 - BASE SHOE = 531 4 - S4S = 1 x 4 5 - CROWN = 3240 6 - BASEBOARD = 166
Moulding Gallery 1 1 2 3 2 4 1 - CROWN = MFSP47 2 - CASING = MFSP104 3 - S4S = MFSP104 4 - BASEBOARD = MFSP106 3 1 - CROWN = MTEK712 2 - CASING = MTEK535 3 - BASEBOARD = MTEK545 BUILDING GREEN WITH... PRE-FINISHED MOULDINGS Pre-Finished Moulding Solution
Pre-Finished Moulding Solution FinTek products are pre-painted with a professionally smooth and durable finish. All you have to do is install, touch-up and enjoy. It is the ideal choice for both do-it-yourselfers and professional installers. www.mouldingandmillwork.com/fintek FinTek PRE-FINISHED MOULDING SOLUTION Pre-Finished Moulding Solution 1. CUT & INSTALL 2. TOUCH UP 3. ENJOY Installs With Ease SUPERIOR DURABILITY! Installs with Ease Cut your FinTek mouldings to length with the compound miter saw and install using a finishing nailer. Prior to filling of nail holes we suggest thoroughly cleaning and removing all dust and debris from the moulding surfaces. In addition make sure all tools and applicators are clean and free of debris. Fill all holes with FinTek colour matched wax fill stick. Build up a small amount of wax over each hole to ensure it is completely filled. Look for visible seams and gaps and fill with FinTek colour matched putty. Press putty into the seams and gaps until the putty fills the void. Return back to the filled nail holes and with firm pressure scrape the excess wax and putty off with the FinTek plastic scraper card making sure not to remove the wax and putty from the hole. Apply a small bead of FinTek colour matched caulking over shadow lines and seams between the wall and moulding. Follow all instructions on the tube. Finally go back and touch up any areas as needed with the FinTek colour matched spray enamel making sure to protect the surrounding area from overspray. POLAR WHITE COLOUR MATCHED TOUCH-UP ACCESSORIES Smooth Professional Finish Washes Easily Saves Time & Money Environmentally Responsible Coloured Enamel Finishing Putty Coloured Caulking Wax Fill Stick Scraper Card PATENT PENDING THE PRE-FINISHED MOULDING SOLUTION. Saves Time Saves Money Eliminates Mess Smooth Professional Finish Environmentally Responsible Choice www.mouldingandmillwork.com/fintek PATENT PENDING
Casings Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. FinTek MOULDINGS Baseboards Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. 618 BDL 15mm x 5-1/4 FinTek 4 FinTek MOULDINGS 623 BDL 12mm x 3-1/4 FinTek 4 492 BDL 12mm x 2-1/2 FinTek 6 356 BDL 12mm x 2-1/4 FinTek 6 15 411 BDL 18mm x 3 FinTek 4 003 BDL 18mm x 3-1/4 FinTek 4 535 BDL 18mm x 3-1/2 FinTek 4 494 BDL 12mm x 3-1/4 FinTek 4 496 BDL 1/2 x 3-1/2 FinTek 4 498 BDL 1/2 x 5-1/2 FinTek 4 16
Baseboards Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. 205W BDL 15mm x 4-1/8 FinTek 6 412 BDL 15mm x 4-1/4 FinTek 4 FinTek MOULDINGS Crowns Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room. FinTek MOULDINGS 712 BDL 5/8 x 4-1/2 FinTek 4 512 BDL 15mm x 5-1/4 FinTek 4 545 BDL 15mm x 5 FinTek 4 206 BDL 15mm x 5-1/4 FinTek 4 47 BDL 9/16 x 4-1/2-16 FinTek 4 17 18
Green Building Initiative Spero Eco-wise MDF MOULDINGS MOULDING & MILLWORK INC., AND OUR AFFILIATED BUSINESSES, ARE COMMITTED TO SUSTAINABLE FORESTRY PRACTICES IN ALL OF OUR OPERATIONS. Contains no urea-formaldehyde Meets CARB Phase II requirements FPO To this end we have undertaken significant steps to achieve our Chain of Custody certification from Scientific Certification Systems (SCS), an independent certifier of Forest Stewardship Council (FSC) chain-of-custody certification and other environmental and sustainability claims. A total of 16 of our operations throughout North America now hold Independent Certificate of Achievement from SCS, Registration number SCS-I-002-COC. In addition, four of our facilities hold Chain of Custody certification from SCS, in accordance with the rules of the Forest Stewardship Council (FSC), Registration number SCS-COC-00710. Products distributed from these facilities have been harvested from forests that meet stringent environmental, social and economic standards. This includes distribution of mouldings and millwork in solid wood lineal pine, fingerjoint lineal pine, and MDF. Moulding & Millwork, looking to the future, has joined the US Green Building Council (USGBC). The US Green Building Council, in conjunction with the Canada Green Building Council, are working to transform the way buildings are designed, built and operated, enabling an environmentally and socially responsible, healthy, and prosperous built environment that improves the quality of life in communities. The USGBC has developed the LEED Green Building Rating System. LEED, Leadership in Energy and Environmental Design, has established credible and consistent standards for sustainability in the built environment, using a point rating system for construction projects. Moulding & Millwork, through our manufacturing facilities and affiliates, have the ability to provide products that may contribute to LEED rating points in the following areas: Materials & Resources, 4.1, 4.2, 5.1, 5.2, 7 Indoor Environmental Quality, 4.4 To help ensure future generations of having sustainable forest resources, Moulding & Millwork is working closely with the Canadian Standards Association (CSA), the Sustainable Forestry Initiative (SFI), & the Forest Stewardship Council (FSC) on timberlands throughout Canada. Our goal is to provide 100% of material from certified forests in all of our operations in North America. 100% recycled wood fiber harvested from responsibly managed forests Manufactured domestically Platinum Prime premium finish Qualifies for LEED credits Spero Eco-wise MDF MOULDINGS FOR ADDITIONAL INFORMATION ON OUR GREEN BUILDING INITIATIVE, PLEASE VISIT OUR WEBSITE AT: www.mouldingandmillwork.com Professional grade MDF mouldings and boards and eco-friendly too! www.mouldingandmillwork.com/spero
Casings SPERO ECO-WISE MDF MOULDINGS Baseboards SPERO ECO-WISE MDF MOULDINGS Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. 472 BDL 15mm x 2-1/2 Spero Eco MDF 4 492 BDL 1/2 x 2-1/2 Spero Eco MDF 4 494 BDL 1/2 x 3-1/4 Spero Eco MDF 4 411 BDL 18mm x 3-15 Spero Eco MDF 6 1208 BDL 16mm x 2-1/2-14 Spero Eco MDF 6 412 BDL 15mm x 4-1/4-16 Spero Eco MDF 6 514 BDL 1/2 x 5-1/4-16 Spero Eco MDF 6 21 22
Architraves SPERO ECO-WISE MDF MOULDINGS E2E Profiles SPERO ECO-WISE MDF MOULDINGS Finish Lumber (S4S) In classical architecture, an architrave described the main beam resting on the tops of the columns. Today it is often used as a decorative moulding for ornamentation or finishing at the top of windows and doors. E2E (Eased 2 Edges) profiles are available in additional widths and thicknesses upon request. Spero Eco MDF Contains no urea-formaldehyde; meets CARB Phase II requirements; qualifies for LEED credits; 100% recycled wood fiber harvested from responsibly managed forests. 1/2X8 1/2X6 1/2X5 1/2X4 1/2X3 1/2X2 4X4 Crowns 2X12 2X10 Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room. 5000 BDL 30mm x 3-3/4-16 Spero Eco MDF 4 492 BDL 1/2 x 2-1/2-16 Spero Eco MDF 4 2X8 2X6 2X4 2X3 2X2 1X12 1X10 1X8 546MI BDL 1-1/4 x 5-1/2-16 Spero Eco MDF PCS 1X7 1X6 1X5 1X4 1X3 1X2 472 BDL 1/2 x 2-1/2-16 Spero Eco MDF 4 494 BDL 1/2 x 3-1/4-16 Spero Eco MDF 4 SPERO ECO MDF 51 BDL 15mm x 3-1/4-16 Spero Eco MDF 6 47 BDL 9/16 x 4-1/2-16 Spero Eco MDF 6 514 BDL 1/2 x 5-1/4-16 Spero Eco MDF 6 23 24
A GREEN BUILDING-COMPLIANT ALTERNATIVE Moulding & Millwork is proud to be leading the way in providing a low emission Green Building-compliant solution to MDF mouldings and boards. Utilizing leading edge resin technology that contains no urea-formaldehyde, SPERO products are designed to meet or exceed the most stringent environmental emissions standards in the World including California Air Resources Board (CARB) Phase II requirements (HCHO Emission: 0.05 PPM*). In addition, SPERO products are made from 100% recycled wood fiber (SCS certified) that was originally harvested from responsibly managed forests (SFI certified). *ASTM E-1333 A Green Alternative to MDF for a Healthy Home Low-emission Green Building-compliant solution to MDF qualifies for LEED credit. This product will qualify for LEED credit as a Low Emitting Material under the indoor air quality provision EQ 4.4, for Recycled Content under MR 4.1 and 4.2 Leading edge resin technology that contains no urea-formaldehyde Meets or exceeds the most stringent environmental emissions standards in the world including California Air Resources Board (CARB) Phase II requirements (HCHO Emission: 0.05 PPM). A Sustainable Product for a Healthy Planet SPERO is made from 100% Recycled Wood Fiber (SCS Certified) that was originally harvested from responsibly managed forests (SFI Certified) SPERO qualifies for LEED credit for Recycled Content, when applicable for Local/ Regional Materials under MR 5.1 and MR 5.2. The Highest Quality Mouldings Now Available in Green SPERO products are milled in Moulding & Millwork s quality driven MDF manufacturing facilities in both the United States and Canada. Platinum Prime smooth paint and go finish Smooth machined profiles and edges Precise tolerance standards ULTRALIGHT SUPERCOAT MDF MOULDINGS ULTRALITE SUPERCOAT MDF MOULDINGS Light Weight Installs with Ease Superior Paintability Superior Workabilty ULTRALITE SUPERCOAT
Casings Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. ULTRALITE SUPERCOAT MDF MOULDINGS Casings Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. ULTRALITE SUPERCOAT MDF MOULDINGS 356 WM BDL 15mm x 2-1/4-14 Ultralite 6 356 BDL 9mm x 2-1/4-14 MDF Primed 10 12mm x 2-1/4-14 Ultralite 16 3121 BDL 15mm x 2-3/4-15 Ultralite 10 3122 BDL 25mm x 3-1/2-15 Ultralite 8 535 BDL 18mm x 3-1/2-15 Ultralite 6 002 BDL 18mm x 2-3/4-15 Ultralite 8 003 BDL 18mm x 3-1/4-15 Ultralite 6 004 BDL 11/16 x 3-1/2-15 Ultralite 6 8233 BDL 15mm x 3-1/4-15 Ultralite 10 128 BDL 1-3/16 x 4-16 Ultralite 4 139 BDL 30mm x 3-3/4-15 Ultralite 4 27 28
Casings Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. ULTRALITE SUPERCOAT MDF MOULDINGS Casings Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. ULTRALITE SUPERCOAT MDF MOULDINGS 908 BDL 15mm x 3-1/4-14 Ultralite 7 907 BDL 15mm x 2-1/4-14 Ultralite 10 410 BDL 18mm x 2-1/4-14 Ultralite 10 411A BDL 18mm x 2-3/4-15 Ultralite 6 411 BDL 18mm x 3-15 Ultralite 6 1208 BDL 16mm x 2-1/2-14 MDF Primed 6 8063 BDL 18mm x 3-1/4-15 Ultralite 6 MFPU381 BDL 3/4 x 4-16 Ultralite PCS MFPU382 BDL 3/4 x 6-16 Ultralite PCS MFPU383 BDL 3/4 x 7-3/4-16 Ultralite PCS 29 30
Casings Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. ULTRALITE SUPERCOAT MDF MOULDINGS Casings & Architraves Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. In classical architecture, an architrave described the main beam resting on the tops of the columns. Today it is often used as a decorative moulding for ornamentation or finishing at the top of windows and doors. ULTRALITE SUPERCOAT MDF MOULDINGS MFPU421 BDL 11/16 x 3-1/4-16 Ultralite 6 MFPU420 BDL 11/16 x 2-3/4-14 Ultralite 6 546MI BDL 1-1/4 x 5-1/2-16 Ultralite PCS MFPU8075 BDL 3/4 x 3-14 Ultralite 4 MFPU403 BDL 5/8 x 3-14 Ultralite 6 5010 BDL 30mm x 4-1/4-16 Ultralite 4 MFPU8037 BDL 3/4 x 2-3/4-14 Ultralite 10 MFPU8039 BDL 3/4 x 3-1/2-16 Ultralite 6 MFPU8081 BDL 5/8 x 3-1/4-16 Ultralite 6 544MI BDL 1 x 3-1/2-16 MDF Primed PCS 5000 BDL 30mm x 3-3/4-16 Ultralite 4 31 32
Architraves In classical architecture, it described the main beam resting on the tops of the columns. Today it is often used as a decorative moulding for ornamentation or finishing at the top of windows and doors. ULTRALITE SUPERCOAT MDF MOULDINGS Baseboards Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. ULTRALITE SUPERCOAT MDF MOULDINGS 3140 BDL 9mm x 3-1/4-14 MDF Primed 10 8234 BDL 15mm x 5-1/2-16 Ultralite 4 5020 BDL 30mm x 5-1/4-16 Ultralite 2 MFPU5025 BDL 1-3/16 x 5-3/4-14 Ultralite 6 5030 BDL 30mm x 6-1/4-16 Ultralite 2 205W BDL 15mm x 4-1/8-16 Ultralite 6 8243 BDL 12mm x 4-1/4-16 Ultralite 6 205T BDL 12mm x 3-7/8-16 Ultralite 6 33 34
Baseboards Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. ULTRALITE SUPERCOAT MDF MOULDINGS 310 BDL 5/8 x 4-1/8-16 Ultralite 6 Baseboards Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. 653 BDL 9mm x 3-1/4-14 MDF Primed 10 ULTRALITE SUPERCOAT MDF MOULDINGS 8910 BDL 9mm x 3-7/8-16 Ultralite 12 309 BDL 5/8 x 3-1/4-16 Ultralite 6 206 BDL 15mm x 5-1/4-16 Ultralite 4 207 BDL 15mm x 7-1/4-16 Ultralite 4 612 BDL 5/8 x 7-1/4-16 Ultralite 4 545 BDL 15mm x 5-16 Ultralite 4 35 36
Baseboards Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. ULTRALITE SUPERCOAT MDF MOULDINGS Baseboards Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. ULTRALITE SUPERCOAT MDF MOULDINGS 163 BDL 15mm x 7-1/4-16 Ultralite 4 161 BDL 15mm x 5-1/4-16 Ultralite 4 414 BDL 15mm x 5-1/4-16 Ultralite 4 MFPU405 BDL 1/2 x 4-16 Ultralite 6 412 BDL 15mm x 4-1/4-16 Ultralite 6 8263 BDL 15mm x 6-1/2-16 Ultralite 3 623 BDL 12mm x 3-1/4-16 Ultralite 9 MFPU624 BDL 1/2 x 4-1/4-16 Ultralite 6 618 BDL 15mm x 5-1/4-16 Ultralite 4 37 38
Baseboards Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. MFPU8275 BDL 5/8 x 5-1/2-16 Ultralite 4 ULTRALITE SUPERCOAT MDF MOULDINGS MFPU8281 BDL 1/2 x 6-16 Ultralite 4 Crowns Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room. ULTRALITE SUPERCOAT MDF MOULDINGS 901 BDL 1-3/18 x - 6-3/4-16 Ultralite 6 MFPU8237A BDL 5/8 x 7-1/4-16 Ultralite 4 MFPU8237 BDL 5/8 x 5-1/2-16 Ultralite 4 514 BDL 1/2 x 5-1/4-16 Ultralite 6 900 BDL 1-3/18 x 5-1/4-16 Ultralite 6 39 40
Crowns Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room. ULTRALITE SUPERCOAT MDF MOULDINGS 47 BDL 9/16 x 4-1/2-16 Ultralite 6 Crowns Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room. ULTRALITE SUPERCOAT MDF MOULDINGS 43 BDL 25mm x 6-15/16-16 Ultralite 2 41 BDL 30mm x 6-5/16-16 Ultralite 2 512 BDL 15mm x 5-1/4-16 Ultralite 6 51 BDL 15mm x 3-1/4-16 Ultralite 6 513 BDL 1 x 7-1/4-16 Ultralite 2 41 42
Crowns Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room. ULTRALITE SUPERCOAT MDF MOULDINGS Crowns Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room. ULTRALITE SUPERCOAT MDF MOULDINGS 712 BDL 5/8 x 4-1/2-16 Ultralite 4 701 BDL 13/16 x 5-5/8-16 Ultralite 2 242 BDL 1 x 7-1/4-16 Ultralite 2 40 BDL 18mm x 4-1/4-16 Ultralite 6 168 BDL 3/4 x 5-1/4-16 Ultralite 2 43 44
Crowns Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room. ULTRALITE SUPERCOAT MDF MOULDINGS Chair Rails Chair Rails are practical as well as decorative. Applied to a wall, from 24 to 48 inches up from the floor, they protect the wall from scuffs and dents from the backs of chairs as well as adding a distinctive accent to any room. Wainscot Trimwork installed in the area below a chair rail. Numerous options are available including raised panel, shadow box and beaded. Combined with a chair rail and baseboard, Wainscoting creates a dramatic look to any room. ULTRALITE SUPERCOAT MDF MOULDINGS 850 BDL 29mm x 1-3/4-8 MDF Primed 8 222 BDL 9mm x 5-3/4-10 MDF Primed PCS 509 BDL 30mm x 2-1/8-16 Ultralite 8 297 BDL 18mm x 3-16 Ultralite 6 Panel Moulds Panel Moulds are used to frame wall paneling and add an accent to your walls. Often used in furniture construction. E2E Profiles E2E (Eased 2 Edges) and E1E (Eased 1 Edge) profiles are available in additional widths and thicknesses upon request. MFPU433 BDL 5/8 x 3-14 Ultralite 6 494 BDL 12mm x 3-1/4-16 Ultralite 10 409 BDL 30mm x 1-7/8-16 Ultralite 8 184 BDL 18mm x 1-1/2-14 Ultralite 20 Opening Trim An Opening Trim is a narrow strip of wood used to cover joints or as decorative vertical members over plywood or wide boards. 9532 BDL 1/2 x 1-3/8-10 MDF Primed 25 472 BDL 15mm x 2-1/2-14 Ultralite 10 492 BDL 12mm x 2-1/2-14 Ultralite 10 496 BDL 1/2 x 3-1/2-16 MDF Primed 10 45 46
E2E Profiles E2E (Eased 2 Edges) profiles are available in additional widths and thicknesses upon request. ULTRALITE SUPERCOAT MDF MOULDINGS 498 BDL 1/2 x 5-1/2-16 MDF Primed 6 Finish Lumber (S4S) Ultralite Supercoat 1/3 less weight than regular MDF, a super smooth primer and easy to nail; Ultralite is the ideal choice for most paint grade projects. 1/2X8 1/2X6 1/2X5 1/2X4 1/2X3 1/2X2 4X4 2X12 2X10 2X8 2X6 2X4 2X3 2X2 1X12 1X10 1X8 1X7 1X6 1X5 1X4 1X3 1X2 PRIMED FingerJoint PINE MOULDINGS Primed FJ Pine 47 497 BDL 1/2 x 4-1/2-16 MDF Primed 6 MFPU499 BDL 1/2 x 7-1/4-16 Ultralite PCS ULTRALITE PRIMED FingerJoint PINE MOULDINGS Economical wood moulding option Smooth attractive finish when painted Easily worked with power and hand tools Excellent for a multitude of applications
Casings PRIMED FJ PINE MOULDINGS Casings PRIMED FJ PINE MOULDINGS Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. 3000 BDL 7/16 x 1-7/16-14 FJ Primed 30 3002 BDL 3/8 x 2-3/16-14 FJ Primed 20 3004 BDL 13/32 x 2-3/16-14 FJ Primed 20 3005 BDL 1/2 x 1-1/2-14 FJ Primed 30 1208 BDL 5/8 x 2-7/16-14 FJ Primed 12 356 BDL 3/8 x 2-1/4-14 FJ Primed 20 356 WM BDL 11/16 x 2-1/4-14 FJ Primed 12 444 BDL 7/16 x 3-1/8-15 FJ Primed 10 3121 BDL 11/16 x 2-3/4-15 FJ Primed 12 3130 BDL 9/16 x 2-1/4-14 FJ Primed 10 3125 BDL 9/16 x 3-1/4-15 FJ Primed 10 49 50
PRIMED FJ PINE MOULDINGS PRIMED FJ PINE MOULDINGS Baseboards Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. 311 BDL 11/16 x 5-1/4-16 FJ Primed 6 Baseboards Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. 3140 BDL 7/16 x 3-3/16-16 FJ Primed 10 3112 BDL 7/16 x 3-1/4-16 FJ Primed 10 310 BDL 11/16 x 4-1/8-16 FJ Primed 6 625 BDL 7/16 x 2-1/4-16 FJ Primed 20 309 BDL 11/16 x 3-1/4-16 FJ Primed 8 653 BDL 1/2 x 3-1/4-16 FJ Pine 10 663 BDL 9/16 x 4-1/4-16 FJ Primed 8 673 BDL 1/2 x 5-1/4-16 FJ Primed 6 623 BDL 7/16 x 3-1/4-16 FJ Primed 10 618 BDL 1/2 x 5-3/16-16 FJ Primed 6 51 52
Crowns Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room. PRIMED FJ PINE MOULDINGS Crowns Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room. PRIMED FJ PINE MOULDINGS 3240 BDL 3/8 x 9/16-8 FJ Primed 25 3242 BDL 1/2 x 11/16-14 FJ Primed 25 3244 BDL 9/16 x 1-1/4-14 FJ Primed 24 51 BDL 9/16 x 3-1/4-16 FJ Primed 8 47 BDL 15mm x 4-1/4-16 FJ Primed 8 54 BDL 9/16 x 2-1/4-16 FJ Primed 12 Corners Corners are used to protect the outside edges of the wall from damage and abrasion. Corners come in a wide variety of sizes and detailing. 3248 BDL 1-3/16 x 2-1/4-16 FJ Primed 8 409 BDL 1-1/4 x 1-7/8-16 FJ Primed 8 3282 BDL 11/16 x 11/16-8 FJ Primed 30 3280 BDL 1-1/16 x 1-1/16-8 FJ Primed 30 202 BDL 1-1/8 x 1-1/8-8 FJ Primed 30 53 54
Door Stops, Battens & Screen Moulds The Door Stop mouldings are attached to the door jamb on both sides and at the top. It is where the door comes to a rest when it is closed stopping the door from moving any further, and covering the gap that would otherwise appear between the door and the jambs. A Batten is a narrow strip of wood used to cover joints or as decorative vertical members over plywood or wide boards. A very versatile profile; Screen Mould fits a wide variety of needs and uses. Traditionally used to hold mesh screening into wood screens, it also works well as edge trim on various shelving or wood trim for wall finishes. PRIMED FJ PINE MOULDINGS 3278 BDL 3/8 x 1-1/8-14 FJ Primed 30 T Bars & Screen Moulds A very versatile profile; Screen Mould fits a wide variety of needs and uses. Traditionally used to hold mesh screening into wood screens, it also works well as edge trim on various shelving or wood trim for wall finishes. PRIMED FJ PINE MOULDINGS 3277 BDL 3/8 x 3/4-14 FJ Primed 30 TBARS7 BDL 2-3/8 X 3-3/8-7 FJ Primed PCS TBARS100 BDL 2-3/8 X 3-3/8-100 FJ Primed PCS 3279 BDL 7/16 x 1-5/8-14 FJ Primed 20 936 BDL 3/8 x 1-1/4-14 FJ Primed 30 3274 BDL 1/4 x 3/4-8 FJ Primed 40 Quarter Rounds Quarter Rounds come in several sizes and serve a variety of functions. They are most often used to finish inside corners. Chair Rails Chair Rails are practical as well as decorative. Applied to a wall, from 24 to 48 inches up from the floor, they protect the wall from scuffs and dents from the backs of chairs as well as adding a distinctive accent to any room. 3202 BDL 1/2 x 1/2-8 FJ Primed 30 3206 BDL 11/16 x 11/16-14 FJ Primed 30 3422 BDL 3/8 x 1-1/4-14 FJ Primed 30 3294 BDL 3/8 x 1-5/8-14 FJ Primed 20 3296 BDL 3/8 x 2-1/4-14 FJ Primed 20 320608 BDL 11/16 x 11/16 FJ Primed 25 297 BDL 11/16 x 3-14 FJ Primed 8 55 56
Window Stools Also called window sill, a Window Stool is the surface installed below the sash of a window. Trim installed under window stool creates a distinctive look and adds a decorative touch. PRIMED FJ PINE MOULDINGS Brickmoulds A Brickmould is used as exterior casing around doors. 2 inches is the most common size, however, 1-1/2 and 1-1/4 inch sizes are available. PRIMED FJ PINE MOULDINGS 3410 BDL 1-1/4 x 5-1/4-14 FJ Primed PCS 303 BDL 1-3/16 x 1-3/8-7 & 14 FJ Primed 8 180 BDL 1-3/16 x 2-7 & 14 FJ Primed 8 3322 BDL 1-3/16 x 2-14 FJ Primed 6 3411 BDL 1-1/4 x 7-1/4-14 FJ Primed PCS Squares Squares and Parting Beads are used in a wide range of applications including filling gaps and transitioning heights. This profile may also be used in a variety of craft projects. 3412 BDL 1-3/4 x 5-1/2-14 FJ Primed PCS 3516 BDL 11/16 x 11/16-14 FJ Primed 30 3428 BDL 1/2 x 3/4-14 FJ Primed 30 Coves Coves are commonly used to soften the transition on inside corners but may be used for a wide range of applications. 3413 BDL 1-3/4 x 7-1/2-14 FJ Primed PCS 3260 BDL 1/2 x 1/2-8 FJ Primed 40 3264 BDL 11/16 x 11/16-8 & 14 FJ Primed 30 326408 BDL 11/16 x 11/16 FJ Primed 30 57 58
Panel Moulds Panel Moulds are used to frame wall paneling and add an accent to your walls. Often used in furniture construction. PRIMED FJ PINE MOULDINGS Finish Lumber (S4S) Primed Fingerjoint Short pieces of wood joined together to make long pieces that are primed and ready to top coat. Ideal choice for those that like to work with solid wood. 1/2X8 1/2X6 1/2X5 1/2X4 1/2X3 POPLAR MOULDINGS POPLAR 1/2X2 3724 BDL 3/4 x 1-1/8-14 FJ Primed 20 292 BDL 9/16 x 1-1/8-14 FJ Primed 20 4X4 2X12 2X10 2X8 2X6 2X4 2X3 2X2 1X12 1X10 Base Shoes 182 BDL 9/16 x 1-9/16-14 FJ Primed 20 Base Shoes are primarily used to trim flooring materials and are often used in combination with a traditional baseboard to conceal variations between the flooring and the base. This versatile profile works great to solve numerous trimming needs. 1X8 1X7 1X6 1X5 1X4 1X3 1X2 FJ PRIMED POPLAR MOULDINGS Extremely smooth double sanded moulded surface Perfectly suited to accept paint, stain, or natural finish 3290 Base Shoe BDL 1/2 x 3/4-16 FJ Primed 25 Easily stained to match fine hard-woods such as cherry and walnut 59
Casings Baseboards POPLAR MOULDINGS S4S Profiles POPLAR MOULDINGS Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. S4S is an acronym that stands for Surfaced 4 Sides and designates dimensional lumber that has been planed on all sides. This versatile product can be used both as a moulding and as a high-grade project board. 102 BDL 1 x 2-16 Poplar PCS 105 BDL 1 x 5-16 Poplar PCS 433 BDL 5/8 x 3-16 Poplar PCS 497 BDL 1/2 x 4-1/2-16 Poplar PCS 104 BDL 1 x 4-16 Poplar PCS 103 BDL 1 x 3-16 Poplar PCS 61 62
POPLAR MOULDINGS VG DOUGLAS FIR MOULDINGS S4S Profiles S4S is an acronym that stands for Surfaced 4 Sides and designates dimensional lumber that has been planed on all sides. This versatile product can be used both as a moulding and as a high-grade project board. Finish Lumber (S4S) 1/2X8 1/2X6 1/2X5 1/2X4 1/2X3 1/2X2 4X4 2X12 2X10 2X8 2X6 2X4 2X3 2X2 1X12 1X10 1X8 1X7 1X6 1X5 1X4 1X3 1X2 VG DOUGLAS FIR POPLAR VG DOUGLAS FIR MOULDINGS Strong Softwood of Medium Hardness Stains and Finishes Beautifully 63 106 BDL 1 x 6-16 Poplar PCS 108 BDL 1 x 8-16 Poplar PCS Easily Worked with Power Tools An Overall High-end Product
VG DOUGLAS FIR MOULDINGS VG DOUGLAS FIR MOULDINGS Casings Baseboards Architraves Brickmoulds Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. In classical architecture, it described the main beam resting on the tops of the columns. Today it is often used as a decorative moulding for ornamentation or finishing at the top of windows and doors. A Brickmould is used as exterior casing around doors. 2 inches is the most common size, however, 1-1/2 and 1-1/4 inch sizes are available. 303 BDL 1-1/4 x 1-1/2 - RL VG Fir 6 003 BDL 3/4 x 3-1/2 - RL VG Fir 6 Quarter Round Quarter Rounds come in several sizes and serve a variety of functions. They are most often used to finish inside corners. 5000F BDL 1-3/16 x 4-1/4 - RL VG Fir 4 521E1 BDL 1/2 x 5-1/2 - RL VG Fir 4 166 BDL 1/2 x 5-1/2 - RL VG Fir 4 180 BDL 1-3/16 x 2 - RL VG Fir 8 3206 BDL 11/16 x 11/16 - RL VG Fir 30 65 66
Window Stools Also called window sill, a Window Stool is the surface installed below the sash of a window. Trim installed under window stool creates a distinctive look and adds a decorative touch. VG DOUGLAS FIR MOULDINGS Screen Moulds & T Bars A very versatile profile; Screen Mould fits a wide variety of needs and uses. Traditionally used to hold mesh screening into wood screens, it also works well as edge trim on various shelving or wood trim for wall finishes. VG DOUGLAS FIR MOULDINGS 3411 BDL 1-1/4 x 7-1/4-14 VG Fir PCS Crowns Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room. 3242 BDL 1/2 x 11/16-14 FJ Primed 6 950 BDL 7/16 x 1-1/8 - RL VG Fir 6 3240 BDL 3/8 x 9/16-8 VG Fir 6 47 BDL 5/8 x 4-1/4 - RL VG Fir 6 45 BDL 5/8 x 5-1/4 - RL VG Fir 4 TBARS7 BDL 2-3/8 X 3-3/8-7 MG Fir PCS 2-3/8 X 3-3/8-7 VG Fir PCS TBARS100 2-3/8 X 3-3/8-100 MG Fir 2-3/8 X 3-3/8-100 VG Fir 67 68 BDL PCS PCS TBARL100 BDL 3-3/16 x 3-11/16 - RL VG Fir PCS
E2E Profiles E2E (Eased 2 Edges) and E1E (Eased 1 Edge) profiles are available in additional widths and thicknesses upon request. 212E2 BDL 5/8 x 2-1/2 - RL VG Fir 10 312E2 BDL 5/8 x 3-1/2 - RL VG Fir 6 VG DOUGLAS FIR MOULDINGS Finish Lumber (S4S) Douglas Fir For the northwest feel. Douglas Fir makes a beautiful project when finished with a clear finish coat. 1/2X8 1/2X6 1/2X5 1/2X4 1/2X3 1/2X2 4X4 2X12 2X10 2X8 2X6 2X4 2X3 2X2 1X12 1X10 1X8 1X7 1X6 1X5 1X4 1X3 1X2 HEMLOCK MOULDINGS HEMLOCK VG FIR MG FIR HEMLOCK MOULDINGS Extremely smooth double sanded moulded surface Perfectly suited to stain or natural finish Easily stained to match fine hardwoods such as cherry and walnut 69 312E1 BDL 1/2 x 3-1/2 - RL VG FIr 6 412E1 BDL 1/2 x 4-1/2 - RL VG FIr 6 512E1 BDL 1/2 x 5-1/2 - RL VG FIr 6
Casings HEMLOCK MOULDINGS Baseboards HEMLOCK MOULDINGS Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. 3000 BDL 1/2 x 1-1/2 - RL Hemlock 20 3002 BDL 1/2 x 2-1/4 - RL Hemlock 10 3004 BDL 3/8 x 2-3/16 - RL Hemlock 10 3112 BDL 7/16 x 3-1/4 - RL Hemlock 10 623 BDL 7/16 x 3-1/4 - RL Hemlock 10 653 BDL 1/2 x 3-1/4 - RL Hemlock 10 Corners Corners are used to protect the outside edges of the wall from damage and abrasion. Corners come in a wide variety of sizes and detailing. 357 BDL 7/16 x 2-1/8 - RL Hemlock 10 356 WM BDL 5/8 x 2-1/4 - RL Hemlock 10 1208 BDL 11/16 x 2-1/2 - RL Hemlock 10 3282 BDL 3/4 x 3/4 - RL Hemlock 25 3280 BDL 1-1/16 x 1-1/16 - RL Hemlock 20 202 BDL 1-1/8 x 1-1/8-8 Hemlock 30 71 72
HEMLOCK MOULDINGS HEMLOCK MOULDINGS Panel Moulds Squares Crowns Panel Moulds are used to frame wall paneling and add an accent to your walls. Often used in furniture construction. Squares and Parting Beads are used in a wide range of applications including filling gaps and transitioning heights. This profile may also be used in a variety of craft projects. Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room. 3429 BDL 1/2 x 3/4 - RL Hemlock 25 3240 BDL 3/8 x 1/2 - RL Hemlock 25 101 BDL 7/16 x 15/16 - RL Hemlock 25 3517 BDL 1-1/16 x 1-1/16 - RL Hemlock 9 3520 BDL 11/16 x 11/16 - RL Hemlock 25 3242 BDL 1/2 x 11/16 - RL Hemlock 25 3244 BDL 5/8 x 1-1/4 - RL Hemlock 24 3248 BDL 1-3/16 x 2-1/4 - RL Hemlock 4 Base Shoes Base Shoes are primarily used to trim flooring materials and are often used in combination with a traditional baseboard to conceal variations between the flooring and the base. This versatile profile works great to solve numerous trimming needs. Quarter, Half & Full Rounds Quarter Rounds come in several sizes and serve a variety of functions. They are most often used to finish inside corners. A cross section of a Half Round looks like a half circle and is used primarily as decorative trim. It works well as a trim piece for wall paper or to add a decorative pattern to flat panels. This profile can also be used to put a rounded edge on various shelving. Full Rounds are used for numerous purposes and projects. Some of the more common uses are closet poles, curtain rods and towel rods. 3288 Base Shoe BDL 1/2 x 3/4 - RL Hemlock 25 3290 Base Shoe BDL 1/2 x 3/4 - RL Hemlock 25 3120 BDL 9/16 x 2-1/4-16 Hemlock 10 3212 BDL 3/8 x 3/4 - RL Hemlock 25 3200 BDL 1/4 x 1/4 - RL Hemlock 25 3202 BDL 1/2 x 1/2 - RL Hemlock 25 3206 BDL 11/16 x 11/16 - RL Hemlock 25 3220 BDL 1/2 - RL Hemlock 25 3222 BDL 11/16 - RL Hemlock 25 3224 BDL 1-1/16 - RL Hemlock 10 3226 BDL 1-5/16 - RL Hemlock 10 3228 BDL 1-1/2 - RL Hemlock 10 73 74
HEMLOCK MOULDINGS HEMLOCK MOULDINGS Coves Coves are commonly used to soften the transition on inside corners but may be used for a wide range of applications. Brickmoulds A Brickmould is used as exterior casing around doors. 2 inches is the most common size, however, 1-1/2 and 1-1/4 inch sizes are available. Finish Lumber (S4S) Pacific Coast Hemlock Your natural choice. Accepts paints, stains & natural finishes very well. Combined with Hemlock mouldings for a great decorating choice. 1/2X8 1/2X6 1/2X5 1/2X4 3260 BDL 1/2 x 1/2 - RL Hemlock 25 3264 BDL 11/16 x 11/16 - RL Hemlock 25 334 BDL 1/2 x 1-1/2 - RL Hemlock 20 1/2X3 1/2X2 4X4 Door Stops, Battens & Screen Moulds The Door Stop mouldings are attached to the door jamb on both sides and at the top. It is where the door comes to a rest when it is closed stopping the door from moving any further, and covering the gap that would otherwise appear between the door and the jambs. 303 BDL 1-1/4 x 1-1/2 - RL Hemlock 6 3322 BDL 1-3/16 x 1-15/16 - RL Hemlock 4 2X12 2X10 2X8 2X6 2X4 A Batten is a narrow strip of wood used to cover joints or as decorative vertical members over plywood or wide boards. A very versatile profile; Screen Mould fits a wide variety of needs and uses. Traditionally used to hold mesh screening into wood screens, it also works well as edge trim on various shelving or wood trim for wall finishes. 3274 BDL 1/4 x 3/4 - RL Hemlock 50 Handrails Handrails provide safety and support. 2X3 2X2 1X12 1X10 1X8 1X7 1X6 1X5 1X4 1X3 1X2 VG HEMLOCK 3422 BDL 3/8 x 1-3/16 - RL Hemlock 30 0010 BDL 3/8 x 1-5/8 - RL Hemlock 20 0001 BDL 7/16 x 2-1/4 - RL Hemlock 10 3510 BDL 1-1/2 x 1-1/2 - RL Hemlock 6 3507 BDL 1-3/16 x 2-1/4 - RL Hemlock 4 75 76
Moulding & Millwork S4S boards offer a complete interior trim decorating solution, our S4S boards: Deliver the natural beauty and warmth of real wood to any room. Accentuate the beauty of entryways with the distinguished classic look of stained wood. Update the look of any home to match with the modern craftsman style of simple clean lines. www.mouldingandmillwork.com The differences are immediately noticeable when you look at Moulding & Millworks Pacific Coast Hemlock S4S Boards Our boards are moulded on all 4 sides in our state of the art factories to the same quality and consistency of our hemlock mouldings. The vertical grain orientation offers an attractive look and smooth texture while providing maximum durability. The long length structure surpasses what is available in most other species of wood. These fine qualities have helped Pacific Coast Hemlock achieve a reputation of excellence throughout the world. OAK MOULDINGS OAK With Moulding & Millwork S4S boards the possibilities are endless: Be your own designer, coordinate with any of our high quality hemlock mouldings to create styles that will be unique to your home. Pacific Coast Hemlock s exceptional ability to accept a variety of stains allows you to match a number of different wood looks with one product. Fine grain Pacific Coast Hemlock is known to craftsmen for its superior characteristics such as accepting stains with consistency and ease, superb texture that offers durability, and a remarkable look that will last a lifetime. OAK MOULDINGS Resists Abrasion Distinct, Beautiful Grain Subtle Colour that is Enhanced with a Light Stain Attractive in Both Traditional and Contemporary Decor
Casings OAK MOULDINGS Baseboards Corners OAK MOULDINGS Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. Corners are used to protect the outside edges of the wall from damage and abrasion. Corners come in a wide variety of sizes and detailing. 3282 BDL 3/4 x 3/4-8 Oak 20 3280 BDL 1-1/16 x 1-1/16-8 Oak 20 202 BDL 1-1/8 x 1-1/8-8 Oak 20 356 BDL 1/2 x 2-1/8 - RL Oak 10 Battens & Screen Moulds A Batten is a narrow strip of wood used to cover joints or as decorative vertical members over plywood or wide boards. A very versatile profile; Screen Mould fits a wide variety of needs and uses. Traditionally used to hold mesh screening into wood screens, it also works well as edge trim on various shelving or wood trim for wall finishes. 653 BDL 1/2 x 3-1/4 - RL Oak 10 1208 BDL 3/4 x 2-5/8 - RL Oak 6 3422 BDL 3/8 x 1-3/16 - RL Oak 20 3296 BDL 5/16 x 2-1/4 - RL Oak 10 79 80
Quarter Rounds Quarter Rounds come in several sizes and serve a variety of functions. They are most often used to finish inside corners. Coves 3206 BDL 11/16 x 11/16 - RL Oak 20 Coves are commonly used to soften the transition on inside corners but may be used for a wide range of applications. OAK MOULDINGS Finish Lumber (S4S) Ultralite Supercoat 1/3 less weight than regular MDF, a super smooth primer and easy to nail; Ultralite is the ideal choice for most paint grade projects. 1/2X8 1/2X6 1/2X5 1/2X4 1/2X3 1/2X2 4X4 2X12 2X10 2X8 2X6 2X4 2X3 2X2 1X12 1X10 1X8 1X7 1X6 1X5 1X4 1X3 1X2 SHEETGOODS Moulding Selection S4S & WAINSCOT Guide SHEET GOODS S4S & WAINSCOT 3264 BDL 11/16 x 11/16 - RL Oak 20 OAK SHEET GOODS S4S & WAINSCOT Perfect for Craftsman Style Decor Smooth attractive finish when painted Excellent for a multitude of applications 81 82
Plywood & Sheet Goods HARRDBOARDS & PEGBOARDS DESCRIPTION Code Lift Size Standard Hardboard 4 x 8 x 1/8 FSH18 200 Standard Pegboard 4 x 8 x 1/8 FSP18 200 Stand Hardboard 4 x 8 x 1/4 FSH14 150 Stand Pegboard 4 x 8 x 1/4 FSP14 150 White Hardboard 4 x 8 x 1/8 FWH18 200 White Hardboard 4 x 8 x 1/4 FWH14 150 White Pegboard 4mm x 4 x 8 x 1/4 FWP14 150 GIS SANDED PINE PLYWOOD DESCRIPTION Code Lift Size Prem Pine Ply 1/4 x 4 x 8 Ft A/C PPN14 140 Prem Pine Ply 11/32 x 4 x 8 Ft A/C PPN38 108 Prem Pine Ply 15/32 x 4 x 8 Ft A/C PPN12 80 Prem Pine Ply 19/32 x 4 x 8 Ft A/C PPN58 65 Prem Pine Ply 23/32 x 4 x 8 Ft A/C PPN34 52 Prem Pine Ply 31/32 x 4 x 8 Ft A/C PPN1 39 Beaded Pine Panel 11/32 x 48 x 96 PPNB38 108 MELAMINE DESCRIPTION Code Lift Size Melamine 1/2 White Moulding & Millwork FWS12 60 Melamine 5/8 White Moulding & Millwork FWS58 50 Melamine 3/4 White Moulding & Millwork FWS34 40 Melamine Shelving 12 x 96 FWS581296 100 Melamie Shelving 16 x 96 FWS581696 75 Melamine Shelving 5/8 x 12 x 120 FWS5812120 100 Melamine Shelving 5/8 x 16 x 120 FWS5816120 25 MDF DESCRIPTION Code Lift Size Fiberboard 1/8 x 4 x 8 48lb FF18 212 Fiberboard 4 x 8 x 1/4 48lb FF14 112 Fiberboard 4 x 8 x 3/8 48lb FF38 88 Fiberboard 4 x 8 x 1/2 48lb FF12 66 Fiberboard 4 x 8 x 5/8 48lb FF58 53 Fiberboard 4 x 8 x 3/4 48lb FF34 44 Fiberboard 4 x 8 x 1 48lb FF1 34 SLOTWALL DESCRIPTION Code Lift Size Slotwall 3/4 x 4 x 8 FFS 40 White Slotwall 3/4 x 4 x 8 FSW34 40 PLYWOOD & SHEET GOODS ULTRALITE DESCRIPTION Code Lift Size ULTRAPLY 1/2 x 4 x 8 FFUL12 60 ULTRAPLY 5/8 x 4 x 8 FFUL58 50 ULTRAPLY 3/4 x 4 x 8 FFUL34 40 BIRCH DESCRIPTION Code Lift Size RC Birch B-4 VC 1/8 x 4 x 8 PB18B4I 220 RC Birch B-4 VC 1/4 x 4 x 8 PB14B4I 150 RC Birch C-2 VC 1/2 x 4 x 8 PB12B2I 60 RC Birch C-2 VC 3/4 x 4 x 8 PB34C21I 50 RC Birch Domestic C2 1/2 PB12C2D 60 RC Birch VC C2 Domestic 3/4 PB34C2D 40 OAK DESCRIPTION Code Lift Size FS Oak A-4 VC 1/8 x 4 x 8 PRO18A4I 220 FS Oak A-4 VC 1/4 x 4 x 8 PRO14A4I 150 FS Oak B-2 VC 1/2 x 4 x 8 PRO12B2I 60 FS Oak B-2 VC 3/4 x 4 x 8 PRO34B2I 45 MAPLE DESCRIPTION Code Lift Size RC Maple AW-4 VC Import 1/8 PMAP18AW41 200 RC Maple AW-4 VC Import 1/4 PMAP14AW41 100 RC Maple C-2 VC Import 1/2 PMAP12AW21 60 RC Maple BW-2 VC 3/4 PMAP34AW21 46 RC Maple C-2 VC DOMESTIC 3/4 PMAP34C2D 40 MAHOGANY DESCRIPTION Code Lift Size RC Mahogany VC 1/8 x 3 x 7 PM1837 220 RC Mahogany VC 1/8 x 4 x 8 PM18 220 RC Mahogany VC 1/4 x 4 x 8 PM14 220 POPLAR DESCRIPTION Code Lift Size RC Poplar VC Plywood CD 3/4 PPO34CDE 50 Finish Lumber (S4S) 1X2 1X3 1X4 1X5 1X6 1X7 1X8 1X10 1X12 2X2 2X3 2X4 2X6 2X8 2X10 2X12 4X4 DOUGLAS FIR HEMLOCK Knotty Pine Red Oak FJ Primed SPERO ECO MDF ULTRALITE MDF MAPLE POPLAR VG FIR VG HEMLOCK KNOTTY PINE OAK FJ PRIMED SPERO ECO MDF ULTRALITE MAPLE MG FIR POPLAR DOUGLAS FIR PACIFIC COAST HEMLOCK KNOTTY PINE For the northwest feel. Douglas Fir makes a beautiful project when finished with a clear finish coat. Your natural choice. Accepts paints, stains & natural finishes very well. Combined with Hemlock mouldings for a great decorating choice. 1/2X2 1/2X3 1/2X4 1/2X5 1/2X6 For a rustic look. Stains and finishes easily. Knotty Pine mouldings are also available on a special order basis. RED OAK PRIMED FINGERJOINT SPERO ECO MDF Traditional, durable hardwood. Easy to work with and finish. Short pieces of wood joined together to make long pieces that are primed and ready to top coat. Ideal choice for those that like to work with solid wood. S4S LUMBER 1/2X8 Contains no urea-formaldehyde; meets CARB Phase II requirements; qualifies for LEED credits; 100% recycled wood fiber harvested from responsibly managed forests. ULTRALITE SUPERCOAT MAPLE POPLAR 1/3 less weight than regular MDF, a super smooth primer and easy to nail; Ultralite is the ideal choice for most paint grade projects. For a modern look. White Maple is an extremely hard wood and wears very well. Can be painted or stained. A very versatile and affordable hardwood. Poplar can be painted, as well as stained to match other Hardwoods. *Full lifts and less than lift on all in stock Plywood. *Other species / sizes / thickness available upon request - please enquire. *Please Call For Pricing* 83 84
Wainscot & Panelling Trimwork installed in the area below a chair rail. Options include: raised panel, shadow box & beaded. Combined with a chair rail & baseboard, Wainscoting adds a dynamic look to any room. WAINSCOT & PANELLING Wainscot & Panelling Trimwork installed in the area below a chair rail. Options include: raised panel, shadow box & beaded. Combined with a chair rail & baseboard, Wainscoting adds a dynamic look to any room. WAINSCOT & PANELLING MDF Wainscot Cap BDL MFP850 1-1/8 x 1-3/4-8 4 MDF Wainscot Set BDL MDF Wainscot BDL MFP720-32 1/4 x 7-1/8-32 20 MFP720-96 1/4 x 7-1/8-96 3 Knotty Pine V-Joint Panelling BDL MKP823V-96 5/16 x 3-9/16-96 6 MFPWAINSET-96 5/8 x 2-5/8 (Cap) 18 5/8 x 2-5/8-8 (Base) Knotty Pine Wainscot Set BDL MKPWAINSET-96 5/8 x 2-5/8 (Cap) 2 5/8 x 2-5/8-8 (Base) MDF Wainscot BDL MFP722-32 1/4 x 5-1/4-32 20 MFP722-96 1/4 x 5-1/4-96 3 MDF Wainscot BDL MFP718-32 1/4 x 7-1/8-32 20 MFP718-96 1/4 x 7-1/8-96 3 Knotty Pine Wainscot Bead BDL MKP823B-32 5/16 x 3-9/16-32 10 MKP823B-48 5/16 x 3-9/16-48 6 MKP823B-96 5/16 x 3-9/16-96 6 MDF Wainscot BDL MFP2222 3/8 x 5-3/4-8 5 MFP222 3/8 x 5-3/4-10 5 KCD V-Joint Wainscot BDL MKC823-96 5/16 x 3-9/16-8 1 Storage, Handling and Preparation of all Mouldings and S4S Boards Until the time this product has been correctly final coated (after painting or staining) and installed, in conformance with all paint manufacturer recommendations as well as the highest and best building practices, respectively, for intended use, it must be continuously and effectively protected from exposure to direct sunlight, ground contact and the elements. It should be stored only in a dry, clean location and transported only if fully protected from water. As a final preparation before installation: (a) indoors, the product must be acclimated to the environment by storing it in the installation space for at least 3 days (with both faces exposed to the air in that space); (b) outdoors, every surface lacking both primer and final coat must be effectively coated to achieve protection recommended by the paint manufacturer respecting intended use. 85 86
making interiors spectacular AraucoPly Sanded ACX Pine Panel Offer: High Quality Faces Exterior Grade Composed Core From Sustainable Plantation Forests Minimal Core Voids Good 1 Side (G1S) Low Resin Content Uniform in Colour Lightweight Canadian Divisions U.S. - Rocky Mountains U.S. - Pacific Northwest U.S. - Southeast U.S. - Northeast U.S. - Texas U.S. - Mid Atlantic U.S. - Midwest Manufacturing Locations Manufacturing Distribution Locations Surrey Vancouver (2) Anchorage Chicago Baltimore Pittsburgh Atlanta Denver Newark Dallas Maple Ridge Edmonton Seattle Detroit Charlotte Phoenix Rochester Calgary Calgary Portland Orlando Salt Lake City Boston Seattle Saskatoon Spokane Ferndale Regina Richmond Winnipeg Toronto Toronto (2) Lexington Montréal Dartmouth 88
Making Interiors Spectacular Moulding & Millwork is North America s leading supplier of mouldings. We offer the largest and most innovative selection of quality products. Take advantage of virtually endless possibilities. MOULDING & MILLWORK INC. 19950 101 Avenue Langley, B.C. V1M 3G6 t. 604.882.5500 f. 604.888.5242 www.mouldingandmillwork.com