R3G3-RO36-8 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 8- Fax +49 7938 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA 59344 General partner Elektrobau Mulfingen GmbH Headquarters Mulfingen County court Stuttgart HRB 594 Nominal data Type Motor R3G3-RO36-8 M3G84-DF Phase ~ Nominal voltage VAC Nominal voltage range VAC.. 3 Frequency Hz /6 Type of data definition ml Speed min - Power input W 345 Current draw A 3. Min. ambient temperature C -5 Max. ambient temperature C ml = Max. load me = Max. efficiency fa = Running at free air cs = Customer specs cu = Customer unit Subject to alterations Item no. 5378-5-998 ENG Revision 8593 Release 5-3-6 Page / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 () 7938 8- Fax +49 () 7938 8- info@de.ebmpapst.com www.ebmpapst.com
R3G3-RO36-8 Technical features Mass Size Surface of rotor Material of electronics housing Material of impeller Number of blades 6 Direction of rotation 4.6 kg 3 mm Coated in black Die-cast aluminium PP plastic Type of protection IP 54 Insulation class Clockwise, seen on rotor "B" Humidity class F3- Max. permissible ambient motor temp. (transp./ storage) Min. permissible ambient motor temp. (transp./storage) Mounting position Condensate discharge holes Operation mode Motor bearing Technical features EMC interference immunity +8 C -4 C Any None S Ball bearing - Output VDC, max. ma - Alarm relay - Motor current limit - PFC, active - Soft start - Control input - VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Over-temperature protected electronics / motor - Line undervoltage / phase failure detection Acc. to EN 6-6- (industrial environment) EMC harmonics Acc. to EN 6-3-/3 EMC interference emission Touch current acc. IEC 699 (measuring network Fig. 4, TN system) Motor protection Cable exit Protection class Acc. to EN 6-6-4 (industrial environment) <= 3.5 ma Thermal overload protector (TOP) wired internally Variable Product conforming to standard EN 68-5- I (if protective earth is connected by customer) Approval CSA C. Nr.77; EAC; UL Item no. 5378-5-998 ENG Revision 8593 Release 5-3-6 Page / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 () 7938 8- Fax +49 () 7938 8- info@de.ebmpapst.com www.ebmpapst.com
R3G3-RO36-8 Product drawing Accessory part: Inlet nozzle 3--43 not included in scope of delivery Thread reach max. mm 3 Connection line, PVC AWG8, 5x crimped core-end sleeves 4 Connection line, PVC AWG, 3x crimped core-end sleeves Item no. 5378-5-998 ENG Revision 8593 Release 5-3-6 Page 3 / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 () 7938 8- Fax +49 () 7938 8- info@de.ebmpapst.com www.ebmpapst.com
R3G3-RO36-8 Connection screen No. Conn. Designation Colour Function / assignment PE green/yellow Protective earth 3 N blue Supply voltage, neutral conductor, /6 Hz 4 L black Supply voltage, phase, /6 Hz 5 COM white Floating status message contact, normally closed for error ( A, max. VAC, min. ma) 6 NC white Floating status message contact, normally closed for error 8 - V yellow Control input, set value - VDC, impedance kω, SELV VDC red Voltage output VDC (+/-3%), max. ma, supply voltage for external devices (e.g. potentiometer), SELV GND blue Reference mass for control interface, SELV Item no. 5378-5-998 ENG Revision 8593 Release 5-3-6 Page 4 / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 () 7938 8- Fax +49 () 7938 8- info@de.ebmpapst.com www.ebmpapst.com
R3G3-RO36-8 Charts: Air flow Hz pfs [Pa] 5 4 4 3 3 4 6 8 pfs @ rho=, kg/m³ qv [CFM] 8 4 3 7 4 6 8,3,,,9,8,7,6,5,4,3,, pfs [InHO] Measurement: LU-566 Air performance measured as per ISO 58 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 3347 / LpA measured with m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed.,9,8 6 5 6,7,6,5,4 4,3, 3 qv [m³/h] 9 5, 3 Measured values 3 4 5 6 7 8 9 3 4 5 6 U V f Hz n min - 7 7 7 7 4 4 4 4 P ed W 53 3 345 39 9 3 9 84 7 9 7 4 5 58 5 I A..79 3..78.3.67.85.67.73.93.4.93.35.45..45 LpA in db(a) 68 65 6 6 6 59 56 53 49 49 LwA in db(a) 76 7 7 7 7 68 66 67 66 63 6 6 6 57 56 qv m 3 /h 97 5 785 65 495 5 985 745 8 65 37 98 635 p fs Pa 4 44 9 356 97 97 4 6 49 U = Supply voltage f = Frequency n = Speed P ed = Power input I = Current draw LpA in = Sound pressure level inlet side LwA in = Sound power level inlet side qv = Air flow p fs = Pressure increase Item no. 5378-5-998 ENG Revision 8593 Release 5-3-6 Page 5 / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 () 7938 8- Fax +49 () 7938 8- info@de.ebmpapst.com www.ebmpapst.com