Special Communication

CATALOGUE 2018/2 Special Counication Antennas and Solutions for Blue Light and Armed Forces SPECIAL COMMUNICATION

Who we are and what we stand for Kathrein is a specialist for reliable, high-quality counication technologies. The company is driving innovation and technology in today s connected world. Its ability to provide solutions and services enables people all over the world to counicate, access information and use media, whether at home, at the office or on the road. The business covers a broad spectrum: from mobile counication, RFID and special solutions, to satellite reception and broadcast technology, to transmission and reception systems in vehicles. As a hidden champion and family-owned enterprise, Kathrein has been working on the technologies of tomorrow since 1919. The company takes pride in its dedicated employees and passion for customers and quality. Our Solutions BUSINESS SOLUTIONS MOBILE COMMUNICATION SAT SPECIAL COMMUNICATION BROADCAST AUTOMOTIVE Find out more about us at www.kathrein.com

370 520 MHz Directional Antennas Omni Antennas Indoor Antennas Special Purpose Antennas 370 520 MHz 700 850 MHz Directional Antennas Omni Antennas Indoor Antennas 700 850 MHz 2300 2600 MHz Directional Antennas Omni Antennas Indoor Antennas 2300 2600 MHz Accessories Splitters and Tappers Dual-Band Combiners Low Noise Amplifier GPS Mechanical Accessories Kathrein s Remote Electrical Tilt System (RET) Accessories

4

Suary of Antenna Types, Antenna Line Products and Accessories The articles are listed by type number in numerical order. New or changed product. Type No. Page Type No. Page Type No. Page Type No. Page 848... 91121388 26 91121864 51 97131... 848114 21 91121389 28 91121872 47 97131120 80 848657 24 97131128 80 911214.. 911219.. 97131129 80 849... 91121402 19 91121954 68 97131271 81 849203 42 91121416V02 37 91121957 71 91121440 26 91121959 20 98121... 852... 91121441 28 91121975 62 + 63 98121116 30 852626 12 91121976 64 + 65 98121119 29 852627 14 911215.. 91121977 66 + 67 852628 15 91121514 13 91121993 72 K74... 852629 16 91121542 70 K7431348 79 91131... K7431358 79 853... 911217.. 91131237 69 853203V02 34 91121732V02 49 91131733 60 + 61 K81... 853266 25 91121743 26 K813132 32 91121744 28 92210... K8134321 31 893... 91121762 50 92210001 27 K8134322 31 89321571 82 + 83 91121775 54 + 55 92210002 27 91121776V01 56 + 57 92210012 76 + 77 K86... 911210.. 91121777V01 58 + 59 92210013 76 + 77 K862232 21 91121012 38 + 39 91121792 48 92210014 76 + 77 K862748 23 91121013 40 + 41 92210015 76 K863032 22 911218.. 911213.. 91121822 46 97121... 91121363 17 91121823 73 97121242 78 91121364 18 91121826 52 + 53 97121253 84 5

Antenna Designs: Antenna Families / RET-system Distinguishing features Design Compact size and elegant design are the distinguishing features of Kathrein s antenna families. Radome The radomes cover the internal antenna components. The fiberglass material guarantees optimum performance with regards to stability, strength, UV resistance, painting and weather protection. The colour of the radome of outdoor panel antennas is similar to RAL 7035. Environmental influences Kathrein antenna designs are based on fundamental engineering knowledge and also on our decades of practical experience, during which the various constructions and materials used have proved their outstanding reliability. Environmental conditions Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regards to the following items: Low temperature: 55 C High temperature (dry): +60 C Environmental tests Kathrein antennas are designed according to the specifications as defined in ETS 300 019-2-4. The homogenous design of Kathreins antenna families uses identical modules and materials. Extensive tests have been performed on typical samples and modules. The vibration test has been adapted relating to frequency and acceleration to the conditions of mast mounted antennas. Impedance Standard Impedance for all products is 50 Ω unless otherwise stated. Great variety of half-power beam width, gain values, electrical downtilt According to the antenna type selected, customers can choose from different half-power beam widths, gain values and electrical downtilts for panel antennas. Downtilts are either fixed or adjustable and controlled by remote electrical tilt system (RET). Low intermodulation products (typ. < 153 dbc) With many years of experience in the construction of antennas and intensive research into the effects of intermodulation, we offer optimized material and technology used for antennas (the given value refers to 3rd order products measured with 2 carriers of 20 W each). Excellent tracking Tracking states the syetry between the +45 and 45 polarized horizontal pattern. Bad tracking values lead to interferences in the network and reduced diversity performance. Kathreins special Tracking compensa tion reduces the average value measured at ±60 to < 2 3 db. 6

Antenna Designs: Antenna Families / RET-system Distinguishing features Multi-array design Besides standard single array antennas, Kathrein designs antennas providing multiple antenna arrays in one radome. These multi-array antennas do not only supply a future-proof multiplicity of diverse frequency bands for various technologies, but are also well-prepared for different MIMO-applications. The Kathrein portfolio contains a high variety of design solutions like interleaved and side-by-side antenna types or combinations of both as well as filter realizations. Multi-functional installation hardware Depending on the type, the antennas are equipped with up to 2 attachment points. Panels can be wall-mounted without any additional hardware. For mast-mounting, brackets and mechanical downtilt kits are available. To assist the installation technicians in aligning the panels, an azimuth adjustment tool can be supplied (see Mechanical Accessories). MTBF Statement Traditionally, passive components like antennas cannot be well calculated due to the lack of a sufficient number of components in the MTBF library. Unfortunately, this constraint results in a very inaccurate calculation. Thus, such results are technically questionable and unrealistic. In essence, antennas are made out of mechnical parts that do not show any failure rates. Only available failure rates can be calculated into an MTBF value. Consequently such components cannot be listed in any MTBF library. Remote Electrical Tilt System AISG Compliancy Kathrein hereby states that RET devices, as far as the functionality and features are described within the AISG / 3GPP standard, are compliant with the standard. NGMN-P-BASTA All antennas which are measured according to the specifications given in NGMN-P-BASTA White Paper Version 9.6 are clearly marked in the data sheet. Kathrein is changing over more and more data sheets to NGMN-P-BASTA. The latest data sheets can be found on our homepage. RET RFID Functionality Kathrein s latest Remote Control Unit (RCU) is equipped with an internal RFID reader. Most of our antennas are equipped with RFID tags in their spindles. With this, all relevant antenna data can automatically be read out by the RCU. Further information as well as an up-to-date list of the antennas can be found on our homepage. The according data sheets are marked by an RFID sign. 4.3-10 Connectors Partly, Kathrein s latest mobile counication antennas and antenna line products are equipped with 4.3-10 connectors. The advantages of this connector are: Reduced dimensions on the bottom plate for more installation space Improved PIM stability and performance Easier installation, lower tightening torque The universal 4.3-10 jack can be used with 3 different connector types (screw type, push-pull type and hand screw type). 7

Downtilting of Antennas with external RCU: Downtilt Possibilities Mechanical downtilt Electrical downtilt For further technical information please see Mechanical Accessories, page 85. Description of the adjustment mechanism (protective cap removed): 1 1 2 2 ➀ Twist protection. ➁ Downtilt spindle with integrated scale. Manual adjustment procedure: ➀ Thread for fixing the protective cap or the RCU (Remote Control Unit). ➁ Gearwheel for RCU power drive. To set the downtilt angle exactly, you must look horizontally at the scale. The lower edge of the gear wheel must be used for alignment. 0 max. 0 max. Remove the protective cap and the twist protection completely. Remote Electrical Tilt (RET) For further technical information please see RET, pages 88 and 89. Description of bottom end cap (exemplary picture): Set downtilt angle by rotating the gearwheel. Screw on the twist protection and the protective cap again. Adjustment mechanism (protective cap removed) Ventilation hole Spindle with tilting scale 8 7-16 female (long neck) Colour coding: Correlation of each RF input to: the corresponding adjustment mechanism the frequency range the polarization

Dimensions of Panels Antenna dimensions and detailed connector position can be found on our current data sheets. Please refer to the information on our latest data sheets which are available on our homepage: www.kathrein.com g Mobile Counication An example is shown below of how the antenna dimensions are displayed on our data sheets: Front view Bottom view 2056 80.9 1818 71.6 1999 78.7 1) 2) 229 9.0 * 164 6.5 * Y1 L 6 1695-2690 Y1 L 5 1695-2690 R2 L 4 880-960 R1 L 2 698-862 R2 L 3 880-960 R1 L 1 698-862 Y2 R 8 1427-2690 Y2 R 7 1427-2690 97 3.8 140 5.5 131 5.2 221 8.7 311 12.2 378 14.9 * * Dimensions refer to radome 3) 1) 22 0.9 2) 150 5.9 3) 11 0.4 All dimensions in 9

Kathrein Antennas Product Description (Type) 6-Port Antenna LB/2HB 1.4m 698 960 14.5dBi 2x1695 2690 18dBi Number of Ports Frequency Range(s) Length Horizontal Half-power Beam Width(s) Frequency Range and Gain Value 10

Suary Antennas 370...6000 MHz Type Type No. Height [] Page 370 520 MHz Directional Antennas 2-Port Antenna 380 500 12dBi 852626 992 2 x 7-16 female 12 2-Port Antenna 380 470 14dBi 0 14 T 91121514 1999 2 x 7-16 female 13 2-Port Antenna 380 500 15dBi 852627 2000 2 x 7-16 female 14 2-Port Antenna 380 500 88 10.5dBi 852628 1007 2 x 7-16 female 15 2-Port Antenna 380 500 88 13.5dBi 852629 1997 2 x 7-16 female 16 1-Port Antenna 380 500 12dBi 91121363 992 7-16 female 17 1-Port Antenna 380 500 15dBi 91121364 2000 7-16 female 18 1-Port LogPer 380 520 87 9dBi 91121402 785 7-16 female 19 4-Port Antenna 380 470 698 791 88 13dBi 2 T 16dBi 2 T 91121959 2600 4 x 4.3-10 female 20 Omnidirectional Antennas 1-Port Omni 370 430 360 2dBi 848114 555 N female 21 1-Port Omni 406 470 360 2dBi K862232 515 N female 21 1-Port Omni 380 470 360 4dBi K863032 315 N female 22 1-Port Omni 380 400 360 7.5dBi K862748 2840 7-16 female 23 1-Port Omni 410 430 360 8dBi 8.5 T 848657 3114 7-16 female 24 1-Port Omni 450 470 360 8.5dBi 853266 3113 7-16 female 25 Indoor Omnidirectional Antennas 1-Port Omni 380 405 360 2dBi 91121388 77 N female 26 1-Port Omni 405 430 360 2dBi 91121440 77 N female 26 1-Port Omni 450 470 360 2dBi 91121743 77 N female 26 1-Port Omni 380...6000 360 1 6dBi 92210001 187 N female 27 1-Port Omni 380...6000 360 1 6dBi 92210002 187 4.3-10 female 27 Indoor Directional Antennas Single-band 1-Port Indoor 380 405 90 7dBi 91121389 302 N female 28 1-Port Indoor 405 430 90 7dBi 91121441 302 N female 28 1-Port Indoor 440 470 90 7dBi 91121744 302 N female 28 Special Purpose Antennas Special Purpose Antenna 380 430 98121119 150 N female 29 Special Purpose Antenna 380 430 GPS 1575 98121116 150 N female 30 Special Purpose Antenna 406 428 K8134321 70 M 11 x 1 female 31 Special Purpose Antenna 406 428 K8134322 70 N female 31 Special Purpose Antenna 410 470 K813132 142 N female 32 New or changed product 11

db db Panel Dual Polarization Half-power Beam Width 380 500 X 2-Port Antenna 380 500 1.0m 12dBi Type No. 852626 380 500 Frequency range 380 430 MHz 430 500 MHz Polarization +45, 45 +45, 45 Gain 11.5 dbi 12 dbi Half-power beam width Copolar +45 / 45 Front-to-back ratio Isolation Impedance Horizontal: 68 Vertical: 37 > 25 db > 30 db 50 Ω Horizontal: Vertical: 32 VSWR < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Ice protection: Grounding: Radiator: Tin-plated copper. Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded. 380 430 MHz: +45 / 45 Polarization 136 68 37 380 500 45 380 500 +45 7-16 7-16 10 10 3 0 Horizontal Pattern Vertical Pattern 430 500 MHz: +45 / 45 Polarization 10 3 0 122 3 0 10 3 0 Horizontal Pattern Vertical Pattern db db 32 Mechanical specifications 2 x 7-16 female Connector position Rearside Wind load Frontal: 500 N (at 150 km/h) Lateral: 220 N (at 150 km/h) Rearside: 715 N (at 150 km/h) Max. wind velocity 200 km/h Height/width/depth 992 / 492 / 190 Category of mounting hardware M (Medium) Weight 12 kg Packing size 1140 x 523 x 252 12 For more information about additional mounting accessories please refer to page 85

db db db db Panel Dual Polarization Half-power Beam Width Adjust. Electrical Downtilt 380 470 0 14 set by hand or by optional RCU (Remote Control Unit) 2-Port Antenna 380 470 2.0m 14dBi 0 14 T Type No. 91121514 X Frequency range 380 470 380 430 MHz 430 470 MHz Polarization +45, 45 +45, 45 Gain (dbi) Tilt 13.5... 13... 12.5 0... 7... 14 14... 13.5... 13 0... 7... 14 Horizontal Pattern: Half-power beam width 66 62 Front-to-back ratio, copolar > 25 db (180 ±30 ) Cross polar ratio 0 Maindirection ±60 Typically: 25 db > 10 db Vertical Pattern: Half-power beam width 22 19 Electrical tilt 0 14, continuously adjustable Isolation > 30 db Impedance 50 Ω VSWR < 1.5 Intermodulation IM3 < 150 dbc (2 x 43 dbm carrier) Max. power per input 400 W (at 50 C ambient temperature) 370 520 MHz Material: Ice protection: Grounding: Radiator: Tin-plated copper. Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded. 430 470 MHz: +45 / 45 Polarization 115 62 380 470 45 380 470 +45 19 7-16 7-16 10 10 3 3 Mechanical specifications 0 Horizontal Pattern Vertical Pattern 0 14 electrical downtilt 380 430 MHz: +45 / 45 Polarization 10 3 0 122 Horizontal Pattern 66 0 10 3 0 22 Vertical Pattern 0 14 electrical downtilt 2 x 7-16 female Connector position Bottom Adjustment mechanism 1 x, Position bottom continuously adjustable Wind load Frontal: 1160 N (at 150 km/h) Lateral: 480 N (at 150 km/h) Rearside: 1870 N (at 150 km/h) Max. wind velocity 200 km/h Height/width/depth 1999 / 575 / 199 Category of mounting hardware H (Heavy) Weight 22 kg Packing size 2250 x 640 x 225 For more information about additional mounting accessories please refer to page 85 13

db db Panel Dual Polarization Half-power Beam Width 380 500 X 2-Port Antenna 380 500 2.0m 15dBi Type No. 852627 380 500 Frequency range 380 430 MHz 430 500 MHz Polarization +45, 45 +45, 45 Gain 14.5 dbi 15 dbi Half-power beam width Copolar +45 / 45 Front-to-back ratio Isolation Impedance Horizontal: Vertical: 18 > 25 db > 30 db 50 Ω VSWR < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Ice protection: Grounding: Radiator: Tin-plated copper. Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded. 380 500 45 380 500 +45 +45 / 45 Polarization 7-16 7-16 10 3 0 120 Horizontal Pattern 10 3 0 Vertical Pattern 18 Mechanical specifications 2 x 7-16 female Connector position Rearside Wind load Frontal: 1100 N (at 150 km/h) Lateral: 440 N (at 150 km/h) Rearside: 1540 N (at 150 km/h) Max. wind velocity 200 km/h Height/width/depth 2000 / 492 / 190 Category of mounting hardware H (Heavy) Weight 19 kg Packing size 2080 x 523 x 252 14 For more information about additional mounting accessories please refer to page 85

db db Panel Dual Polarization Half-power Beam Width 2-Port Antenna 380 500 1.0m 88 10.5dBi Type No. 852628 380 500 X 88 370 520 MHz 380 500 Frequency range 380 430 MHz 430 500 MHz Polarization +45, 45 +45, 45 Gain 2 x 10 dbi 2 x 10.5 dbi Half-power beam width Copolar +45 / 45 Horizontal: 88 Vertical: 40 Horizontal: 86 Vertical: 35 Front-to-back ratio, copolar > 20 db > 20 db Isolation > 30 db > 30 db Impedance 50 Ω 50 Ω VSWR < 1.5 < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Ice protection: Grounding: Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded. 430 500 MHz: +45 / 45 Polarization 86 380 500 45 380 500 +45 1 35 7-16 7-16 10 3 db 10 3 Mechanical specifications 0 0 Horizontal Pattern Vertical Pattern 380 430 MHz: +45 / 45 Polarization 88 1 10 10 40 2 x 7-16 female Connector position Bottom Wind load Frontal: 420 N (at 150 km/h) Lateral: 220 N (at 150 km/h) Rearside: 540 N (at 150 km/h) Max. wind velocity 200 km/h Height/width/depth 1007 / 317 / 193 Category of mounting hardware M (Medium) Weight 10.5 kg Packing size 1140 x 330 x 240 3 db 3 0 Horizontal Pattern 0 Vertical Pattern For more information about additional mounting accessories please refer to page 85 15

db db Panel Dual Polarization Half-power Beam Width 380 500 X 88 2-Port Antenna 380 500 2.0m 88 13.5dBi Type No. 852629 380 500 Frequency range 380 430 MHz 430 500 MHz Polarization +45, 45 +45, 45 Gain 2 x 13 dbi 2 x 13.5 dbi Half-power beam width Copolar +45 / 45 Horizontal: 88 Vertical: 20 Horizontal: 86 Vertical: 17 Front-to-back ratio, copolar > 20 db > 20 db Isolation > 30 db > 30 db Impedance 50 Ω 50 Ω VSWR < 1.5 < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Ice protection: Grounding: Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded. 430 500 MHz: +45 / 45 Polarization 86 380 500 45 380 500 +45 1 17 7-16 7-16 10 3 db 10 3 Mechanical specifications 0 0 Horizontal Pattern Vertical Pattern 380 430 MHz: +45 / 45 Polarization 88 1 10 10 20 2 x 7-16 female Connector position Bottom Wind load Frontal: 890 N (at 150 km/h) Lateral: 480 N (at 150 km/h) Rearside: 1150 N (at 150 km/h) Max. wind velocity 200 km/h Height/width/depth 1997 / 317 / 193 Category of mounting hardware H (Heavy) Weight 18.5 kg Packing size 2130 x 330 x 240 3 db 3 0 Horizontal Pattern 0 Vertical Pattern 16 For more information about additional mounting accessories please refer to page 85

db db Multi-band Panel Vertical Polarization Half-power Beam Width 380 500 V 370 520 MHz 1-Port Antenna 380 500 1.0m 12dBi Type No. 91121363 380 500 Frequency range 380 430 MHz 430 500 MHz Polarization Vertical Vertical Gain 11.5 dbi 12 dbi Half-power beam width Copolar +45 / 45 Horizontal: 68 Vertical: 37 Horizontal: 63 Vertical: 32 Front-to-back ratio > 18 db > 20 db Impedance 50 Ω VSWR < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Ice protection: Grounding: Reflector screen: Weather-proof aluminum. Radiator: Tin-plated copper. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded. 380 430 MHz 136 68 37 10 10 3 3 db Mechanical specifications 0 Horizontal Pattern 63 122 10 0 Vertical Pattern 10 32 1 x 7-16 female Connector position Rearside Wind load Frontal: 500 N (at 150 km/h) Lateral: 220 N (at 150 km/h) Rearside: 715 N (at 150 km/h) Max. wind velocity 200 km/h Height/width/depth 992 / 492 / 190 Category of mounting hardware M (Medium) Weight 12 kg Packing size 1140 x 523 x 252 3 3 db 0 Horizontal Pattern 0 Vertical Pattern For more information about additional mounting accessories please refer to page 85 17

db db db db Multi-band Panel Vertical Polarization Half-power Beam Width 380 500 V 1-Port Antenna 380 500 2.0m 15dBi Type No. 91121364 380 500 Frequency range 380 430 MHz 430 500 MHz Polarization Vertical Vertical Gain 14.5 dbi 15 dbi Half-power beam width Copolar +45 / 45 Front-to-back ratio Impedance Horizontal: 68 Vertical: 18 > 20 db 50 Ω Horizontal: 63 Vertical: 16 VSWR < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Ice protection: Grounding: Reflector screen: Weather-proof aluminum. Radiator: Tin-plated copper. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded. 380 430 MHz 136 68 18 10 10 3 0 Horizontal Pattern Vertical Pattern 430 500 MHz 3 0 63 122 10 10 3 3 16 Mechanical specifications 1 x 7-16 female Connector position Rearside Wind load Frontal: 1100 N (at 150 km/h) Lateral: 440 N (at 150 km/h) Rearside: 1540 N (at 150 km/h) Max. wind velocity 200 km/h Height/width/depth 2000 / 492 / 190 Category of mounting hardware H (Heavy) Weight 20 kg Packing size 2080 x 523 x 252 0 Horizontal Pattern 0 Vertical Pattern 18 For more information about additional mounting accessories please refer to page 85

db Logarithmic-periodic Vertical Polarization Half-power Beam Width 380 520 1-Port LogPer Antenna 380 520 0.8m 87 9dBi Type No. 91121402 Frequency range 380 410 MHz 410 470 MHz 470 520 MHz Polarization Vertical Gain 9.2 dbi 9 dbi 8.7 dbi Half-power beam width Horizontal: 80 Vertical: 61 Impedance V 87 Horizontal: 85 Vertical: 60 50 Ω VSWR < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Horizontal: 88 Vertical: 59 370 520 MHz Scope of supply: Material: Attachment: Ice protection: Grounding: Antenna with weather protective casing for straight connectors. Radiator: Weather resistant aluminium. Radome: Fiberglass, colour: White. All screws and nuts: Stainless steel. To tubular masts of 50 380 diameter depending on the separate available clamps. Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. All metal parts of the antenna including the mounting kit and the inner conductor are DC grounded. 380 410 MHz 139 80 108 61 10 3 0 db Horizontal Pattern Vertical Pattern 410 470 MHz 145 85 107 60 Mechanical specifications 10 3 0 db Horizontal Pattern Vertical Pattern 470 520 MHz 88 107 59 148 10 3 0 7-16 female Connector position Rearside, pointing downwards Wind load Frontal: 54 N (at 150 km/h) Lateral: 150 N (at 150 km/h) Max. wind velocity 180 km/h Height/width/depth 785 / 400 / 400 Weight 6 kg Packing size 915 x 485 x 485 10 3 db 0 Horizontal Pattern Vertical Pattern For more information about additional mounting accessories please refer to page 85 19

db db Panel Dual Polarization HPBW Fixed Electrical DT 380 470 380 470 698 791 698 791 X X X X 88 2 2 Special Counications Preliminary Preliminary Issue Issue 4-Port Antenna 380 470/698 791 2.6m 88 / 13/16dBi 2 /2 T Type No. 91121959 380 470 698 791 Frequency range 380 470 MHz 698 791 MHz Polarization +45, 45 +45, 45 Gain 2 x 13 dbi 2 x 16 dbi Horizontal Pattern: Half-power beam width 88 Front-to-back ratio, copolar > 20 db > 20 db Vertical Pattern: Half-power beam width 14 8 Electrical tilt 2, fixed 2, fixed Impedance 50 Ω 50 Ω VSWR < 1.5 < 1.5 Isolation: Intrasystem > 25 db > 25 db Isolation: Intersystem > 25 db Intermodulation IM3 < 150 dbc < 150 dbc (2 x 43 dbm carrier) Max. power per input 250 W* 250 W* * (at 50 C ambient temperature) tion 380 470 MHz: +45 / 45 Polarization 1 10 3 0 Horizontal Pattern Vertical Pattern 8 791 MHz: +45 /-45 Polarization 698 791 MHz: +45 / 45 Polarization 10 3 0 db 67 125 db 88 14 Horizontal Pattern Vertical Pattern 8 10 3 0 10 3 0 14 8 380-470 -45 380-470 +45 380 470 45 698-791 -45 380 470 +45 698-791 +45 698 791 45 4.3-10 4.3-10 4.3-10 4.3-10 698 791 +45 4.3-10 4.3-10 4.3-10 4.3-10 Mechanical specifications 4 x 4.3-10 female Connector Position Backside Wind load (at Rated N lbf Frontal: 480 108 Wind Speed: 150 km/h) Lateral: 190 43 Rearside: 480 108 Max. Wind Velocity km/h mph 200 124 Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply kg lb 2600 / 317 / 193 102.4 / 12.5 / 7.6 H (Heavy) 26.0 / 28.2 (clamps incl.) 57.3 / 62.3 (clamps incl.) 2733 / 330 / 240 107.6 / 13.0 / 9.5 Panel and 2 units of clamps for 42 115 1.7 4.5 diameter 90021959 Page 1 of 2 20 For more information about additional mounting accessories please refer to page 85

Omnidirectional Antennas Vertical Polarization 370...470 V 370 520 MHz 848114: 1-Port Omni Antenna 370 430 0.5m 360 2dBi K862232: 1-Port Omni Antenna 406 470 0.5m 360 2dBi Type No. 848114 K862232 Frequency range 370 430 MHz 406 470 MHz Polarization Vertical Gain 2 dbi Impedance 50 Ω VSWR 370 380 MHz: < 1.6 380 430 MHz: < 1.5 < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 37 dbm carrier) Max. power 100 W (at 50 C ambient temperature) Height Material: Mounting: Grounding: Radiator: Brass. Radome: Fiberglass, dia. 21, colour: Grey. Base: Aluminum. Mounting U-bolt and all screws and nuts: Stainless steel. The antenna can be attached in two ways with the supplied mounting kit: 1. On the tip of a tubular mast of 40 54 diameter (connecting cable runs inside the mast). 2. Laterally at the tip of a tubular mast of 20 54 diameter (connecting cable runs outside the mast). All metal parts of the antenna including the mounting kit are DC grounded. On the tip of a tubular mast Laterally at the tip of a tubular mast 10 3 0 db Vertical Pattern 78 Mechanical specifications Connector position Wind load (at 150 km/h) Max. wind velocity Radome diameter Weight Height Packing size N lbf km/h mph kg lb 848114 K862232 1.0 2.2 555 21.9 112 x 97 x 654 4.4 x 3.8 x 25.7 N female Bottom 20 4 200 124 21 2.0 0.8 1.7 515 20.3 112 x 97 x 614 4.4 x 3.8 x 24.2 21

Half-wave Dipole Side-mounted Vertical Polarization 380 470 V n Omnidirectional antenna with variable antenna-to-mast distance. n Depending on the distance of the radiator from the mast edge and also on the mast diameter, various radiation patterns can be achieved. 1-Port Omni Antenna VPol 380 470 360 4dBi Type No. K863032 Frequency range MHz 380 470 Polarization Vertical Gain dbi 4 Impedance Ω 50 VSWR 400 470 MHz: < 1.5 380 400 MHz: < 1.5; A = λ/4 380 400 MHz: < 2.0; A > λ/4 Max. power per input W 450 (at 50 C ambient temperature) Material: Attachment: Special features: Grounding: Radiator: Hot-dip galvanized steel. Horizontal support pipe: Stainless steel. Mount: Aluminum. Tightening band and all screws and nuts: Stainless steel. Feedpoint radome: Fiberglass. To tubular masts of 60 320 2.4 12.6 diameter using supplied stainless steel tightening band (20 wide, 0.8 gauge) (0.8 wide, 0.03 gauge). The distance from tubular mast to radiator is adjustable from 170 580 6.7 22.8. All metal parts of the antenna including the inner conductor and the supplied mount are DC grounded. Horizontal radiation pattern: Depending on the distance A (edge of pipe mast to dipole) see sketch. 580 22.8 Distance A M = 15 Nm 314 12.4 All dimensions in Mechanical specifications Wind load (at 150 km/h) Max. wind velocity Length Weight Packing size N lbf km/h mph kg lb N female 40 9 200 124 315 12.4 1.6 3.5 880 x 330 x 100 34.6 x 13.0 x 3.9 22

db Omnidirectional Antenna Vertical Polarization 380 400 V 370 520 MHz 1-Port Omni Antenna 380 400 2.8m 360 7.5dBi Type No. K862748 Frequency range 380 400 MHz Polarization Vertical Gain 7.5 dbi Impedance 50 Ω VSWR < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel. Mounting: Anti-static protection: Lightning protection: The antenna can be attached laterally at the tip of a tubular mast of 50 94 diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast). All metal parts of the antenna as well as the supplied clamp attachment are grounded. The inner conductor is capacitively coupled. The antenna is designed to withstand a lightning current of up to 150 KA (impulse: 10/350 µs), according to IEC 62305 parts 1 4 and VDE 0855-300, and thereby fulfils the requirements of lightning protection class II. Grounding cross-section: 22 2 copper. maximum mast top 150 230 2840 104 Mechanical specifications 10 3 0 Vertical Pattern 17 Connector position Wind load Max. wind velocity Height Radome diameter Weight Packing size 7-16 female Bottom 200 N (at 150 km/h) 200 km/h 2840 51 8.0 kg 3316 x 148 x 112 Side-mounting brackets see page 86 + 87 23

Omnidirectional Antenna Vertical Polarization V Fixed Electrical Downtilt 8.5 410 430 1-Port Omni Antenna 410 430 3.0m 360 8dBi 8.5 T Type No. 848657 Frequency range 410 430 MHz Polarization Vertical Gain 8 dbi Electrical tilt 8.5, fixed Impedance 50 Ω VSWR < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel. 3114 Mounting: Anti-static protection: Lightning protection: The antenna can be attached laterally at the tip of a tubular mast of 50 94 diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast). All metal parts of the antenna as well as the supplied clamp attachment are grounded. The inner conductor is capacitively coupled. The antenna is designed to withstand a lightning current of up to 150 KA (impulse: 10/350 µs), according to IEC 62305 parts 1 4 and VDE 0855-300, and thereby fulfils the requirements of lightning protection class II. Grounding cross-section: 22 2 copper. maximum mast top 150 230 104 10 3 db 0 Vertical Pattern 8.5 electrical downtilt 14 Mechanical specifications Connector position Wind load Max. wind velocity Height Radome diameter Weight Packing size 7-16 female Bottom 220 N (at 150 km/h) 180 km/h 3114 51 8.0 kg 3376 x 196 x 102 24 Side-mounting brackets see page 86 + 87

Omnidirectional Antenna Vertical Polarization 450 470 V 370 520 MHz 1-Port Omni Antenna 450 470 3.0m 360 8.5dBi Type No. 853266 Frequency range 450 470 MHz Polarization Vertical Gain 8.5 dbi Impedance 50 Ω VSWR < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel. Mounting: Anti-static protection: Lightning protection: The antenna can be attached laterally at the tip of a tubular mast of 50 94 diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast). All metal parts of the antenna as well as the supplied clamp attachment are grounded. The inner conductor is capacitively coupled. The antenna is designed to withstand a lightning current of up to 150 KA (impulse: 10/350 µs), according to IEC 62305 parts 1 4 and VDE 0855-300, and thereby fulfils the requirements of lightning protection class II. Grounding cross-section: 22 2 copper. maximum mast top 150 230 3113 104 10 3 0 Vertical Pattern db 12 Mechanical specifications Connector position Wind load Max. wind velocity Height Radome diameter Weight Packing size 7-16 female Bottom 220 N (at 150 km/h) 180 km/h 3113 51 8.0 kg 3379 x 206 x 152 Side-mounting brackets see page 86 + 87 25

Indoor Omnidirectional Antennas Vertical Polarization 380...470 V The antennas need no additional groundplane. 91121388: 1-Port Indoor Antenna 380 405 360 2dBi 91121440: 1-Port Indoor Antenna 405 430 360 2dBi 91121743: 1-Port Indoor Antenna 450 470 360 2dBi Type No. 91121388 91121440 91121743 Frequency range 380 405 MHz 405 430 MHz 450 470 MHz Polarization Vertical Vertical Vertical Gain Approx. 2 dbi Approx. 2 dbi Approx. 2 dbi Impedance 50 Ω 50 Ω 50 Ω VSWR < 2.0 < 2.0 < 2.0 Max. power 50 W (at 50 C ambient temperature) 1 x N female Protection class IP 30 Weight 429 g Packing size 267 x 267 x 114 Diameter 258 Height 77 (without connector) Material: Mounting: Grounding: Available accessories: Reflector: Aluminium. Radome: High impact polystyrol, colour: White. Additional painting is possible. Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied. For the N connector a hole in the ceiling with a diameter of 35 is required. All metal parts including the inner conductor are DC grounded. Power splitters (380 512 MHz) N connector, female 3 holes 5 diameter 15.3 1.6 160 diameter 1 min. dia. 35 2 min. dia. 35 3 min. dia. 35 Press radome against installed reflector. Rotate radome until it locks in place. Pull downwards to remove radome. 26

1-Port Indoor Omni Antenna Vertical Polarization 380...6000 The Multi-band Omni Antenna covers all the bands of Tetra, 2G and 3G cellular, as well as Wi-Fi and LTE. The antenna is aesthetic and has unobtrusive profile that blends easily with any environment. The antenna is easy-installed and is highly recoended as an outstandig logistic solution for in-bulding installations. The antenna is PIM certified, thus making it suitable for all multi-carrier systems. V 370 520 MHz 1-Port Indoor 380...6000 360 1 6dBi Type No. 92210001 / 92210002 Frequency range MHz 380 806 806 960 1395 1432 1710 2170 2300 2500 3300 3700 4900 6000 Polarization Linear, Vertical Gain (typ.) dbi 1 (2*) 4 5 5 5 6 Impedance Ω 50 VSWR (max.) 3:1 (2.5:1*) 2:1 2:1 2:1 1.9:1 1.9:1 Intermodulation IM3 dbc < 155 (2 x 20 dbm carrier) Max. power W 50 (at 50 C ambient temperature) Flaability UL94 Weight g 550 Diameter 275 Height 187 (without connector) 92210001: N female 92210002: 4.3-10 female * Specifications for ground plate of 40 cm and up, above a metal surface, with a spacing of 35 45. Material: Mounting: Grounding: Back plane: Aluminum; protected through chemical passivation. Radome: UV protected polycarbonate. Ceiling mounting. All metal parts including the inner conductor are DC grounded. 200.0 PATENT PENDING PLATE Connector 189.8 DANGEROUS PLATE 3 x 3.2 15.4 Connector 274.1 27

Indoor Directional Antennas Vertical Polarization Half-power Beam Width 380...470 V 90 91121389: 1-Port Indoor Antenna 380 405 90 7dBi 91121441: 1-Port Indoor Antenna 405 430 90 7dBi 91121744: 1-Port Indoor Antenna 450 470 90 7dBi Type No. 91121389 91121441 91121744 Frequency range 380 405 MHz 405 430 MHz 450 470 MHz Polarization Vertical Vertical Vertical Gain Approx. 7 dbi Approx. 7 dbi Approx. 7 dbi Half-power beam width Horizontal: Approx. 90 Horizontal: Approx. 90 Horizontal: Approx. 90 Impedance 50 Ω 50 Ω 50 Ω VSWR < 2.0 < 2.0 < 2.0 Max. power 50 W (at 50 C ambient temperature) N female connector Protection class IP 30 Weight 1390 g Packing size 315 x 252 x 62 Height/width/depth 302 x 243 x 50 Material: Mounting: Reflector: Copper. Radome: High impact polystyrol, colour: White. Additional painting is possible. Mounting plates: Stainless steel. Two holes of 6 diameter in the mounting plate. Screws are not supplied. 90 Grounding: Available accessories: All metal parts including the inner conductor are DC grounded. Power splitters (380 512 MHz) 10 3 db 0 Horizontal Pattern Mounting: Mount the attachment plate to the wall using two screws of 4 diameter in the position as indicated. Align the antenna over the attachment plate. Pull the antenna down to the stop. 28

Special Purpose Antenna 380 430 MHz 98121119 Low profile antenna in fiberglass radome. The antenna fulfils the requirements according to EN 50155. 370 520 MHz Type No. 98121119 Antenna N female Frequency range MHz 380 430 VSWR < 1.7 Gain db 0 (ref. to the quarter-wave antenna) Impedance Ω 50 Polarization Vertical Max. power W 100 (at 50 C ambient temperature) Inner conductor DC grounded Radome weight g lb 186 0.4 Total weight g lb Approx. 500 1.1 Packing size, L x W x H Height 150 x 90 x 190 5.9 x 3.5 x 7.5 150 5.9 Material: Radiator: Copper and brass. Flange: Aluminum. Radome: Fiberglass. All screws and nuts: Stainless steel. Colour: Grey. Sealing: Neoprene and silicon. Note: Don t use detergents that might harm the sealing. Mounting flange: 85 56 contact area Mounting: On a conductive surface with a minimum size of 1000 x 1000 39.4 x 39.4 using 4 M10 bolts. seal Grounding and high voltage protection: This antenna, tested by an independent institute, is DC grounded to protect against lightning and high-tension lines. 145 115 43 32 Antenna 400 MHz 11 diameter 142 82 contact area Mounting hole for the connector: 33 (max. 35) 1.3 (max. 1.4) diameter. Note: Keep mounting surface clear of paint for electrical contact. Evenness of opposite surface 0.2 0.008. Use a cap nut or hex-head screw plus the enclosed sealing washer. Hex-head screw M10 torque 15 Nm 20 Nm Added sealing washer Cap nut M10 DIN 1587 torque 15 Nm 20 Nm 15 15 0.6 Situation of mounting All dimensions in 29

Special Purpose Antenna 380 430 MHz and GPS 1575 MHz 98121116 Two-band antenna: 380 430 MHz and GPS. The antenna can be operated in both frequency ranges simultaneously. Low profile antenna in fiberglass radome. The antenna fulfils the requirements according to EN 50155. Type No. 98121116 Antenna 380 430 MHz N female Frequency range 380 430 MHz VSWR < 1.7 Gain 0 db (ref. to the quarter-wave antenna) Impedance 50 Ω Polarization Vertical Max. power 100 W (at 50 C ambient temperature) Inner conductor DC grounded Antenna GPS Cable RG 316/U of 225 length with TNC male connector Frequency range 1575.42 ±1 MHz VSWR < 1.5 Polarization Right hand circular Gain (90 elevation) 2 db (ref. to the circularly polarized isotropic antenna) Impedance 50 Ω Inner conductor DC grounded Radome weight 186 g Total weight Approx. 500 g Packing size 150 x 90 x 190 Height 150 Material: Mounting: Radiator: Copper and brass. Flange: Aluminum. Radome: Fiberglass. All screws and nuts: Stainless steel. Colour: Grey. Sealing: Neoprene and silicon. Note: Don t use detergents that might harm the sealing. On a conductive surface with a minimum size of 1000 x 1000 using 4 M10 bolts. Mounting flange: 145 115 43 32 85 56 contact area seal Antenna GPS Antenna 400 MHz 11 diameter 142 Grounding and high voltage protection: This antenna, tested by an independent institute and approved by the Deutsche Bahn AG, is DC grounded to protect against lightning and high-tension lines. 82 contact area Accessories: Warning: Low noise amplifier GPS 86010142 (please order separately). If the antenna is operated without the preamplifier type no. 86010142, please note the following points. Due to the fact that the inner conductor of the antenna GPS is DC grounded, the input of the GPS receiver is loaded with a DC short circuit. If the GPS receiver provides a remote DC power supply, this could damage the GPS receiver. At the input of the antenna GPS a level of 25 db below the signal applied at the input of the antenna 380 430 MHz appears. Depending on the level of the signal applied at the input of the antenna 380 430 MHz, the GPS receiver may be overloaded or damaged. Mounting hole for the connector: 33 (max. 35) diameter. Note: Keep mounting surface clear of paint for electrical contact. Evenness of opposite surface 0.2. Use a cap nut or hex-head screw plus the enclosed sealing washer. Hex-head screw M10 torque 15 Nm 20 Nm Added sealing washer Cap nut M10 DIN 1587 torque 15 Nm 20 Nm 15 Situation of mounting 30

Special Purpose Antenna 406 428 MHz K8134321, K8134322 370 520 MHz Tram and Bus Antenna 406 428 Type No. K8134321 K8134322 Drill hole dimension M 11 x 1 female (the connector for cable RG 58 C/U is supplied). 12 0.5 N female 17 0.7 Frequency range MHz 406 428 MHz VSWR 406 410 MHz: < 1.9 410 425 MHz: < 1.7 425 428 MHz: < 1.9 Gain db 0 (ref. to the quarter-wave antenna) Impedance Ω 50 Polarization Vertical Max. power W 50 W (at 50 C ambient temperature) Weight g lb 400 0.9 lb Packing size (outside) Height Mounting 117 x 117 x 114 4.6 x 4.6 x 4.5 70 2.8 On a conductive surface 70 x 70 cm 27.6 x 27.6 min. Material: Mounting: Special features: Radiator and base: Aluminum. Radome: High impact plastic. All screws and nuts: Stainless steel. The drilling diameter is 12 except the N connector versions: 17. A special zinc washer ensures a good contact at the edges of the hole. All metall parts of this antenna are DC grounded. Extreme robust and car-wash proof vehicular antenna. 31

Special Purpose Antenna 410 470 MHz K813132 Low profile broadband antenna in fiberglass radome. Type No. K813132 N female Frequency range MHz 410 470 VSWR < 1.5 Gain db 0 (ref. to the quarter-wave antenna) Impedance Ω 50 Polarization Vertical Max. power W 170 (at 50 C ambient temperature) Radome weight g lb 159 0.4 Total weight g lb 500 1.1 Packing size (outside) 151 x 87 x 210 5.9 x 3.4 x 8.3 Material: Mounting: Grounding and high voltage protection: Radiator and Flange: Aluminum. Radome: Fiberglass, colour: Light grey. All screws and nuts: Stainless steel. Sealing: Neoprene and rubber. Note: Don t use detergents that might harm the sealing. On a conductive surface with a minimum size of 50 x 50 cm 19.7 x 19.7 by means of existing M10 studs. This antenna, tested by an independent institute, is DC grounded to protect against lightning and high-tension lines. Mounting flange: 145 5.7 80 3.6 32 1.3 13 0.5 28 1.1 56 2.2 Dichtungsring Sealing O-ring nicht lackiert not painted 43 1.7 nicht lackiert not painted 115 4.5 All dimensions in Mounting hole for the connector: 33 (max. 35) diameter. Note: Keep mounting surface clear of paint for electrical contact. 32

33

Suary Directional Antennas 700 850 MHz Type Type No. Height [] Connector female, type and position Page 1 x Lowband 2-Port Antenna 790 960 17.5dBi 0 8 T 91121416V02 2254 7-16, rearside 36 2 x Lowband 4-Port Antenna 698 960 698 960 15.5dBi 15.5dBi 2 12 T 2 12 T 91121012 1999 4.3-10, bottom 37 + 38 4-Port Antenna 698 960 698 960 16.5dBi 16.5dBi 1 10 T 1 10 T 91121013 2438 4.3-10, bottom 39 + 40 TETRA 1 x Lowband 4-Port Antenna 380 470 698 791 88 13dBi 16dBi 2 T 2 T 91121959 1977 4 x 4.3-10 female 20 1 x Lowband 1 x Highband 2-Port Antenna 790 960 1710 2690 C 8dBi 9dBi 0 T 0 T 91121864 334 7-16, bottom 51 4-Port Antenna 698 960 1695 2690 10.5dBi 13.5dBi 2 T 2 T 91121826 603 4.3-10, bottom 52 + 53 4-Port Antenna 790 960 1710 2690 15dBi 17.5dBi 0 16 T 2 10 T 91121775 1403 7-16, bottom 54 + 55 4-Port Antenna 790 960 1710 2690 16dBi 18.5dBi 0 10 T 2 8 T 91121776V01 1997 7-16, bottom 56+ 57 4-Port Antenna 698 960 1710 2690 17dBi 18.5dBi 1.5 10 T 2 8 T 91121777V01 2622 7-16, bottom 58 + 59 1 x Lowband 2 x Highband 6-Port Antenna 698 960 1695 2690 1695 2690 14.5dBi 17.5dBi 18dBi 2 16 T 2.5 12 T 2.5 12 T 91121975 1402 7-16, bottom 62 + 63 6-Port Antenna 698 960 1695 2690 1695 2690 16dBi 18dBi 18dBi 2 12 T 2.5 12 T 2.5 12 T 91121976 1921 7-16, bottom 64 + 65 6-Port Antenna 698 960 1695 2690 1695 2690 17dBi 18dBi 18dBi 1 10 T 2.5 12 T 2.5 12 T 91121977 2441 7-16, bottom 66 + 67 690 2690 MHz 1-Port LogPer Antenna 690 2690 67 11dBi 0 T 853203V02 300 7-16, bottom 36 34

Suary Omni Antennas Indoor Antennas 700 850 MHz Omni Antennas Type No. Connector female Height [] Remarks Page Lowband 1-Port Omni Antenna 806 894 360 11dBi 0 T 849203 7-16 3237 42 Lowband Highband 1-Port Omni Antenna 694 960/1695 2700 360 2dBi 0 T 91121957 N 202 indoor/outdoor 71 Indoor Antennas Type No. Connector female Height [] Page 700 850 MHz Directional 2-Port 2-Port Indoor Antenna 694 960/1710 2690 80 / C 7dBi 91121993 2 x 4.3-10 399 72 Omnidirectional 1-Port 1-Port Omni 380...6000 360 1 6dBi 92210001 N female 187 27 1-Port Omni 380...6000 360 1 6dBi 92210002 4.3-10 female 187 27 Omnidirectional 2-Port 2-Port Indoor Antenna 694 5920 360 2dBi 91121823 2 x 4.3-10 320 73 New or changed product Abbreviations: C: Integrated Combiner 35

1-Port LogPer Antenna Vertical Polarization Half-power Beam Width 690 2690 V 67 1-Port LogPer Antenna 690 2690 67 11dBi Type No. 853203V02 Frequency range MHz 690 880 880 960 960 1695 1695 2200 2200 2490 2490 2690 VSWR < 1.6 < 1.5 < 1.5 < 1.5 < 1.5 < 1.5 Gain dbi 10.1 10.6 11.0 11.0 11.0 11.0 Impedance Ω 50 50 50 50 50 50 Polarization Vertical Vertical Vertical Vertical Vertical Vertical Front-to-back ratio db > 25 > 25 > 25 > 25 > 22 > 25 Half-power beam width horizontal vertical 69 54 64 53 57 50 53 48 47 46 45 44 Intermodulation IM3 (2 x 43 dbm carrier) dbc < 150 < 150 < 150 < 150 < 150 < 150 Max. power W 300 300 250 200 170 150 Total power W 500 (at 50 C ambient temperature) Mechanical specifications Connector position Wind load (at Rated Wind Speed: 150 km/h) Max. wind velocity Height / width / depth Weight Packing size 1 x 7-16 female Bottom N lbf Frontal 20 4 Lateral 210 47 Rearside 30 7 km/h mph 241 150 300 / 155 / 785 11.8 / 6.1 / 30.9 kg 5.5 lb 12.1 360 x 175 x 1000 14.2 x 6.9 x 39.4 36

2-Port Antenna Frequency Range HPBW R1 790 960 2-Port Antenna LB 2.3m 790 960 17.5dBi Type No. Lowband 91121416V02 R1 790 960 Frequency range MHz 790 862 824 894 880 960 Polarization +45, 45 +45, 45 +45, 45 Average gain Tilt dbi 16.8... 17.0... 16.7 0... 4... 8 16.9... 17.1... 16.9 0... 4... 8 17.2... 17.4... 17.0 0... 4... 8 Horizontal Pattern: Half-power beam width 69 67 65 Front-to-back ratio, copolar db > 25 > 25 > 25 Cross polar ratio Maindirection 0 Sector ±60 db Typically: 25 Typically: > 10 Typically: 25 Typically: > 10 Typically: 25 Typically: > 10 Tracking, Avg. db 0.5 Squint ±2.5 Vertical Pattern: Half-power beam width 9.1 8.8 8.5 Electrical tilt 0 8, continuously adjustable Sidelobe suppression for first sidelobe above main beam T db 0... 2... 4... 8 18... 18... 18... 16 0... 2... 4... 8 18... 18... 18... 16 0... 2... 4... 8 20... 18... 17... 15 700 850 MHz Impedance Ω 50 VSWR < 1.5 Isolation, between ports db > 30 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. effective power per port Max. effective power for the antenna W 400 (at 50 C ambient temperature) 800 (at 50 C ambient temperature) Mechanical specifications Connector position Adjustment mechanism 2 x 7-16 female Rearside 1x, Position bottom continuously adjustable Wind load (at Rated N lbf Frontal: 770 173 Wind Speed: 150 km/h) Maximal: 845 190 Max. wind velocity km/h mph Height/width/depth Category of mounting hardware Weight kg lb Packing size Scope of supply 200 124 2254 / 259 / 99 88.7 / 10.2 / 3.9 M (Medium) 11.5 / 13.5 (clamps incl.) 25.4 / 29.8 (clamps incl.) 2536 x 272 x 147 99.8 x 10.7 x 3.9 Panel and 2 units of clamps for 42 115 1.7 4.5 diameter For more information about additional mounting accessories please refer to page 85 37

4-Port Antenna Frequency Range HPBW R1 698 960 R2 698 960 4-Port Antenna 2LB 2.0m 2x698 960 15.5dBi Type No. 91121012 Left side, lowband R1, connector 1 2 698 960 Frequency Range MHz 698 806 791 862 824 894 880 960 Gain at mid Tilt dbi 14.8 15.4 15.6 15.9 Gain over all Tilts dbi 14.8 ± 0.6 15.4 ± 0.4 15.6 ± 0.2 15.8 ± 0.2 Horizontal Pattern: Azimuth Beamwidth 62 ± 3.9 61 ± 3.2 60 ± 2.7 60 ± 2.1 Front-to-Back Ratio, Total Power, ± 30 db > 22 > 25 > 27 > 25 Cross Polar Discrimination over Sector db > 8.5 > 10.5 > 11.5 > 11.0 Azimuth Beam Port-to-Port Tracking db < 1.5 < 1.0 < 1.0 < 1.5 Vertical Pattern: Elevation Beamwidth 11.9 ± 0.8 11.0 ± 0.8 10.5 ± 0.4 10.2 ± 0.4 Electrical Downtilt continuously adjustable 2.0 12.0 Tilt Accuracy < 0.7 < 0.7 < 0.7 < 0.7 First Upper Side Lobe Suppression db > 14 > 14 > 15 > 14 Cross Polar Isolation db > 30 Port to Port Isolation db > 27 (R1 // R2) Max. Effective Power per Port W 400 (at 50 C ambient temperature) Max. Effective Power Ports R1 W 800 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 38 For more information about additional mounting accessories please refer to page 85

4-Port Antenna 91121012 Right side, lowband R2, connector 3 4 698 960 Frequency Range MHz 698 806 791 862 824 894 880 960 Gain at mid Tilt dbi 14.8 15.3 15.5 15.8 Gain over all Tilts dbi 14.8 ± 0.6 15.3 ± 0.3 15.5 ± 0.3 15.7 ± 0.3 Horizontal Pattern: Azimuth Beamwidth 63 ± 3.6 62 ± 1.8 62 ± 2.1 60 ± 3.7 Front-to-Back Ratio, Total Power, ± 30 db > 22 > 24 > 26 > 27 Cross Polar Discrimination over Sector db > 8.0 > 12.5 > 13.0 > 13.0 Azimuth Beam Port-to-Port Tracking db < 1.5 < 1.5 < 1.0 < 2.0 Vertical Pattern: Elevation Beamwidth 11.6 ± 0.7 11.0 ± 0.6 10.7 ± 0.4 10.2 ± 0.5 Electrical Downtilt continuously adjustable 2.0 12.0 Tilt Accuracy < 0.7 < 0.6 < 0.6 < 0.5 First Upper Side Lobe Suppression db > 14 > 16 > 16 > 16 Cross Polar Isolation db > 30 Port to Port Isolation db > 27 (R2 // R1) Max. Effective Power per Port W 400 (at 50 C ambient temperature) Max. Effective Power Ports R2 W 800 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 700 850 MHz Electrical specifications, all systems Impedance Ω 50 VSWR < 1.5 Return Loss db > 14 Interband Isolation db > 27 Passive Intermodulation dbc < 153 (2 x 43 dbm carrier) Polarization +45, 45 Max. Effective Power 1200 (at 50 C ambient for the Antenna W temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifications Connector Position Adjustment Mechanism 4 x 4.3-10 female bottom FlexRET, continuously adjustable Wind load (at Rated N lbf Frontal: 1130 254 Wind Speed: 150 km/h) Maximal: 1140 256 Max. Wind Velocity Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply km/h mph kg lb The Category of Mounting Hardware will change to XM during 2018 241 150 1999 / 508 / 175 78.7 / 20.0 / 6.9 XH (X-Heavy) 41.0 / 46.0 (clamps incl.) 90.4 / 101.4 (clamps incl.) 2200 / 542 / 268 86.6 / 21.3 / 10.6 Panel, FlexRET and clamps for 55 115 2.2 4.5 diameter For more information about additional mounting accessories please refer to page 85 39

4-Port Antenna Frequency Range HPBW R1 698 960 R2 698 960 4-Port Antenna 2LB 2.4m 2x698 960 16.5dBi Type No. 91121013 Left side, lowband R1, connector 1 2 698 960 Frequency Range MHz 698 806 791 862 824 894 880 960 Gain at mid Tilt dbi 15.7 16.1 16.4 16.5 Gain over all Tilts dbi 15.6 ± 0.4 16.1 ± 0.3 16.3 ± 0.3 16.4 ± 0.3 Horizontal Pattern: Azimuth Beamwidth 66 ± 2.9 65 ± 2.3 65 ± 2.6 64 ± 2.9 Front-to-Back Ratio, Total Power, ± 30 db > 23 > 23 > 24 > 25 Cross Polar Discrimination over Sector db > 10.0 > 9.5 > 10.0 > 11.5 Azimuth Beam Port-to-Port Tracking db < 1.5 < 1.0 < 1.0 < 1.5 Vertical Pattern: Elevation Beamwidth 9.7 ± 0.7 9.0 ± 0.5 8.8 ± 0.5 8.3 ± 0.4 Electrical Downtilt continuously adjustable 1.0 10.0 Tilt Accuracy < 0.4 < 0.4 < 0.4 < 0.4 First Upper Side Lobe Suppression db > 16 > 17 > 17 > 20 Cross Polar Isolation db > 30 Port to Port Isolation db > 27 (R1 // R2) Max. Effective Power per Port W 400 (at 50 C ambient temperature) Max. Effective Power Ports R1 W 800 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 40 For more information about additional mounting accessories please refer to page 85

4-Port Antenna 91121013 Right side, lowband R2, connector 3 4 698 960 Frequency Range MHz 698 806 791 862 824 894 880 960 Gain at mid Tilt dbi 15.5 16.0 16.3 16.6 Gain over all Tilts dbi 15.5 ± 0.5 16.0 ± 0.5 16.3 ± 0.4 16.5 ± 0.3 Horizontal Pattern: Azimuth Beamwidth 67 ± 3.5 65 ± 2.6 64 ± 3.0 63 ± 4.3 Front-to-Back Ratio, Total Power, ± 30 db > 22 > 23 > 24 > 26 Cross Polar Discrimination over Sector db > 9.5 > 10.5 > 10.0 > 11.5 Azimuth Beam Port-to-Port Tracking db < 0.5 < 1.0 < 0.5 < 1.5 Vertical Pattern: Elevation Beamwidth 9.9 ± 0.7 9.0 ± 0.7 8.6 ± 0.4 8.1 ± 0.5 Electrical Downtilt continuously adjustable 1.0 10.0 Tilt Accuracy < 0.4 < 0.4 < 0.4 < 0.3 First Upper Side Lobe Suppression db > 18 > 21 > 20 > 20 Cross Polar Isolation db > 30 Port to Port Isolation db > 27 (R2 // R1) Max. Effective Power per Port W 400 (at 50 C ambient temperature) Max. Effective Power Ports R2 W 800 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 700 850 MHz Electrical specifications, all systems Impedance Ω 50 VSWR < 1.5 Return Loss db > 14 Interband Isolation db > 27 Passive Intermodulation dbc < 153 (2 x 43 dbm carrier) Polarization +45, 45 Max. Effective Power 1200 (at 50 C ambient for the Antenna W temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifications Connector Position Adjustment Mechanism 4 x 4.3-10 female bottom FlexRET, continuously adjustable Wind load (at Rated N lbf Frontal: 1400 315 Wind Speed: 150 km/h) Maximal: 1405 316 Max. Wind Velocity Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply km/h mph kg lb 241 150 2438 / 508 / 175 96.0 / 20.0 / 6.9 XH (X-Heavy) 47.0 / 52.0 (clamps incl.) 103.6 / 114.6 (clamps incl.) 2635 / 542 / 268 103.7 / 21.3 / 10.6 Panel, FlexRET and 1 unit of clamps for 55 115 2.2 4.5 diameter For more information about additional mounting accessories please refer to page 85 41

1-Port Omni Antenna Vertical Polarization 806 894 V 1-Port Omni 806 894 360 11dBi Type No. 849203 Frequency range MHz 806 894 Polarization Vertical Gain dbi 11 Impedance Ω 50 VSWR < 1.5 Intermodulation IM3 dbc < 150 ( 2 x 43 dbm carrier) Max. power W 500 (at 50 C ambient temperature) Mounting: The antenna can be attached laterally at the tip of a tubular mast of 50 94 2.0 3.7 diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast). Material: Radiator: Copper and brass. Radome: Fiberglass, color: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel. 3237 127.4 Grounding Lightning protection: All metal parts of the antenna as well as the inner conductor and the mounting kit are DC grounded. The inner conductor is capacitively coupled. The antenna is designed to withstand a lightning current of up to 150 KA (impulse: 10/350 µs), according to IEC 62305 parts 1 4 and VDE 0855-300, and thereby fulfils the requirements of lightning protection class II. Grounding cross-section: 22 2 copper. Mechanical specifications maximum mast top 150 104 230 7-16 female Connector position Bottom Wind load (at Rated Wind Speed: 150 km/h) N lbf 230 52 Max. wind velocity km/h mph 180 112 Height Radome diameter Weight Packing size 3237 127.4 51 2.0 kg 8.5 lb 18.7 3516 x 148 x 112 138.4 x 5.8 x 4.4 42 Side-mounting brackets see page 86 + 87

43

Suary Directional Antennas 2300 2600 MHz Type Type No. Height [] Connector female, type and position Page 690 2690 MHz 1-Port LogPer Antenna 690 2690 67 11dBi 0 T 853203V02 300 7-16, bottom 36 1 x Highband 2-Port Antenna 1710 2690 9.5dBi 0 T 91121822 155 7-16, bottom or top 46 2-Port Antenna 1710 2690 12dBi 4 T 91121872 278 7-16, bottom 47 2-Port Antenna 1710 2690 16.5dBi 0 12 T 91121792 851 7-16, bottom 48 2-Port Antenna 1710 2690 18dBi 2 14 T ESLS 91121732V02 1452 7-16, bottom 49 2-Port Antenna 1710 2690 19dBi 0 6 T 91121762 1670 7-16, bottom 50 1 x Lowband 1 x Highband 2-Port Antenna 790 960 1710 2690 C 8dBi 9dBi 0 T 0 T 91121864 334 7-16, bottom 51 4-Port Antenna 698 960 1695 2690 10.5dBi 13.5dBi 2 T 2 T 91121826 603 4.3-10, bottom 52 + 53 4-Port Antenna 790 960 1710 2690 15dBi 17.5dBi 0 16 T 2 10 T 91121775 1403 7-16, bottom 54 + 55 4-Port Antenna 790 960 1710 2690 16dBi 18.5dBi 0 10 T 2 8 T 91121776V01 1997 7-16, bottom 56+ 57 4-Port Antenna 698 960 1710 2690 17dBi 18.5dBi 1.5 10 T 2 8 T 9112177V01 2622 7-16, bottom 58 + 59 2 x Highband 4-Port Antenna 1695 2690 1695 2690 18dBi 18dBi 2 14 T 2 14 T ESLS 91131733 1471 4.3-10, bottom 60 + 61 2 x Highband Special Design 4-Port MicroCell 1695 2690 1695 2690 85 85 7.5dBi 7.5dBi 0 T 0 T 91121954 526 4.3-10, bottom and top 68 1 x Lowband 2 x Highband 6-Port Antenna 698 960 1695 2690 1695 2690 14.5dBi 17.5dBi 18dBi 2 16 T 2.5 12 T 2.5 12 T 91121975 1402 7-16, bottom 62 + 63 6-Port Antenna 698 960 1695 2690 1695 2690 16dBi 18dBi 18dBi 2 12 T 2.5 12 T 2.5 12 T 91121976 1921 7-16, bottom 64 + 65 6-Port Antenna 698 960 1695 2690 1695 2690 17dBi 18dBi 18dBi 1 10 T 2.5 12 T 2.5 12 T 91121977 2441 7-16, bottom 66 + 67 3 x Highband Special Design 6-Port Tri-Sector Slimpole 1710 2690 80 10dBi 0 T 91131237 691 4.3-10, bottom 69 44

Suary Omni Antennas Indoor Antennas 2300 2600 MHz Omni Antennas Type No. Connector female Height [] Remarks Page Highband 1-Port Omni Antenna 1695 2700 360 2dBi 0 T 91121542 N 115 indoor/outdoor 70 Lowband Highband 1-Port Omni Antenna 694 960/1695 2700 360 2dBi 0 T 91121957 N 202 indoor/outdoor 71 Indoor Antennas Type No. Connector female Height [] Page Directional 2-Port 2-Port Indoor Antenna 694 960/1710 2690 80 / C 7dBi 91121993 2 x 4.3-10 399 72 Omnidirectional 1-Port 1-Port Omni 380...6000 360 1 6dBi 92210001 N female 187 27 1-Port Omni 380...6000 360 1 6dBi 92210002 4.3-10 female 187 27 Omnidirectional 2-Port 2-Port Indoor Antenna 694 5920 360 2dBi 91121823 2 x 4.3-10 320 73 New or changed product 2300 2600 MHz Abbreviations: ESLS: Enhanced Side Lobe Suppression (above or below horizon) C: Integrated Combiner 45

2-Port Antenna Frequency Range HPBW Y1 1710 2690 2-Port Antenna HB 0.2m 1710 2690 9.5dBi Type No. 91121822 Highband Y1 1710 2690 Frequency range MHz 1710 1990 1920 2200 2200 2490 2490 2690 Polarization +45, 45 +45, 45 +45, 45 +45, 45 Gain dbi 8.7 9.2 9.6 9.8 Horizontal Pattern: Half-power beam width Approx. 67 Approx. 62 Approx. 55 Approx. 53 Front-to-back ratio, copolar (180 ±30 ) db > 24 > 24 > 22 > 22 Cross polar ratio 0 db Typically: 20 Typically: 20 Typically: 24 Typically: 24 Cross polar ratio sector corner ±60 db > 10 > 9 > 8 > 8 Vertical Pattern: Half-power beam width Approx. 66 Approx. 60 Approx. 55 Approx. 53 Impedance Ω 50 VSWR < 1.5 Isolation, between ports db > 27 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. power per input W 100 (at 50 C ambient temperature) Max. power per antenna W 150 (at 50 C ambient temperature) Mechanical specifications 2 x 7-16 female Connector position * Bottom or top Wind load (at Rated N lbf Frontal: 35 8 Wind Speed: 150 km/h) Maximal: 35 8 Max. wind velocity km/h mph 200 124 Height / width / depth Category of mounting hardware Weight Packing size Scope of Supply kg lb 155 / 155 / 69 6.1 / 6.1 / 2.7 L (Light) 1.5 (tension bands incl.) 3.3 (tension bands incl.) 257 x 172 x 92 10.1 x 6.8 x 3.6 Panel and 1 unit of tension bands for 45 125 1.8 4.9 diameter * Inverted mounting: Connector position top: Change drain hole screw 46 For more information about additional mounting accessories please refer to page 85

2-Port Antenna Frequency Range HPBW Y1 1710 2690 2-Port Antenna HB 0.3m 1710 2690 12dBi Type No. 91121872 Highband Y1 1710 2690 Frequency range MHz 1710 1990 1920 2200 2200 2490 2490 2690 Polarization +45, 45 +45, 45 +45, 45 +45, 45 Gain dbi 11 11.5 12.2 12.7 Horizontal Pattern: Half-power beam width 67 65 60 58 Front-to-back ratio, copolar db > 30 > 28 > 28 > 27 Cross polar ratio Maindirection 0 Sector ±60 db Typically: > 20 > 8 Typically: > 20 > 8 Typically: > 20 > 8 Typically: > 20 > 8 Vertical Pattern: Half-power beam width 36 31 25 25 Electrical tilt 3, fixed 3, fixed 4, fixed 4, fixed Impedance Ω 50 VSWR < 1.5 Isolation, between ports db > 28 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. power per input W 150 (at 50 C ambient temperature) Mechanical specifications 2 x 7-16 female Connector position Bottom Wind load (at Rated N lbf Frontal: 55 12 Wind Speed: 150 km/h) Maximal: 55 12 Max. wind velocity km/h mph 200 124 Height/width/depth Category of mounting hardware Weight kg lb Packing size Scope of supply 278 / 154 / 69 10.9 / 6.1 / 2.7 L (Light) 1.8 (tension bands incl.) 4.0 (tension bands incl.) 375 x 172 x 92 14.8 x 6.8 x 39.1 Panel and 1 unit of tension bands for 45 125 1.8 4.9 diameter 2300 2600 MHz For more information about additional mounting accessories please refer to page 85 47

2-Port Antenna Frequency Range HPBW Y1 1710 2690 2-Port Antenna HB 0.9m 1710 2690 16.5dBi Type No. 91121792 Highband Y1 1710 2690 Frequency range MHz 1710 1990 1920 2200 2200 2490 2490 2690 Polarization +45, 45 +45, 45 +45, 45 +45, 45 Gain at 0 tilt dbi 15.5 16.3 16.7 16.7 Horizontal Pattern: Half-power beam width 67 64 60 60 Front-to-back ratio (180 ±30 ) db > 25 > 25 > 23 > 23 Cross polar ratio 0 Sector ±60 db Typically: 25 > 10 Typically: 28 > 8 Typically: 28 > 8 Typically: 28 > 11 Vertical Pattern: Half-power beam width 10.8 9.9 8.8 8.4 Electrical tilt 0 12, continuously adjustable Sidelobe suppression for first sidelobe above main beam T db 0... 6... 12 12... 13... 15 0... 6... 12 13... 14... 15 0... 6... 12 13... 14... 16 Impedance Ω 50 VSWR < 1.5 Isolation, between ports db > 30 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. power per input W 250 (at 50 C ambient temperature) 0... 6... 12 15... 15... 17 Mechanical specifications Connector position Adjustment mechanism 2 x 7-16 female Bottom 1x, Position bottom continuously adjustable Wind load (at Rated N lbf Frontal: 140 31 Wind Speed: 150 km/h) Maximal: 155 35 Max. wind velocity km/h mph Height/width/depth Category of mounting hardware Weight kg lb Packing size Scope of supply 200 124 851 / 155 / 70 33.5 / 6.1 / 2.8 L (Light) 5 / 5.2 (clamps incl.) 11.0 / 11.5 (clamps incl.) 1146 x 172 x 92 45.1 x 6.8 x 3.6 Panel and 1 unit of tension bands for 45 125 1.8 4.9 diameter 48 For more information about additional mounting accessories please refer to page 85

2-Port Antenna Frequency Range HPBW Y1 1710 2690 2-Port Antenna HB 1.5 m 1710 2690 18dBi ESLS Type No. Highband 91121732V02 Y1 1710 2690 Frequency range MHz 1710 1990 1920 2200 2200 2490 2490 2690 Polarization +45, 45 +45, 45 +45, 45 +45, 45 Gain Tilt dbi 17.4... 17.6... 17.5 2... 8... 14 17.9... 18.2... 18.1 2... 8... 14 18.4... 18.5... 18.5 2... 8... 14 18.5... 19.0... 18.5 2... 8... 14 Horizontal Pattern: Half-power beam width 68 63 59 58 Front-to-back ratio (180 ±30 ) db > 25 > 25 > 25 > 25 Cross polar ratio 0 Sector ±60 db Typically: 25 > 10 Typically: 24 > 10 Typically: 25 > 10 Typically: 25 > 10 Tracking, Avg. db 1.5 Vertical Pattern: Half-power beam width 6.7 6.0 5.3 5.0 Electrical tilt 2 14, continuously adjustable Sidelobe suppression for first sidelobe above main beam within 0 20 sector above horizon T db db 2... 8... 14 18... 18... 18 17... 17... 16 2... 8... 14 18... 18... 18 17... 17... 16 2... 8... 14 18... 18... 18 17... 17... 16 Impedance Ω 50 VSWR < 1.5 Isolation, between ports db > 30 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. effective power per port Max. effective power for the antenna W 250 (at 50 C ambient temperature) 500 (at 50 C ambient temperature) 2... 8... 14 18... 18... 18 17... 17... 14 Mechanical specifications Connector position Adjustment mechanism 2 x 7-16 female Bottom 1x, Position bottom continuously adjustable Wind load (at Rated N lbf Frontal: 250 57 Wind Speed: 150 km/h) Maximal: 275 62 Max. wind velocity km/h mph Height/width/depth Category of mounting hardware Weight kg lb Packing size Scope of supply 200 124 1452 / 154 / 70 57.2 / 6.0 / 2.8 M (Medium) 6.5 / 8.5 (clamps incl.) 4.3 / 18.7 (clamps incl.) 1725 x 172 x 92 7.9 x 6.8 x 3.6 Panel and 2 units of clamps for 42 115 1.7 4.5 diameter 2300 2600 MHz For more information about additional mounting accessories please refer to page 85 49

2-Port Antenna Frequency Range HPBW Y1 1710 2690 2-Port Antenna HB 1.7m 1710 2690 19dBi Type No. 91121762 Highband Y1 1710 2690 Frequency range MHz 1710 1990 1920 2170 2170 2490 2490 2690 Polarization +45, 45 +45, 45 +45, 45 +45, 45 Gain at 0 tilt db 18.5 19.0 19.4 19.5 Horizontal Pattern: Half-power beam width 67 63 60 58 Front-to-back ratio (180 ±30 ) db > 28 > 28 > 25 > 25 Cross polar ratio 0 Sector ±60 db Typically: 25 > 10 Typically: 25 > 10 Typically: 25 > 10 Typically: 28 > 10 Tracking, Avg. db 1.5 Squint ±3 Vertical Pattern: Half-power beam width 5.4 4.9 4.3 4.0 Electrical tilt 0 6, continuously adjustable Sidelobe supression for first sidelobe above main beam T db 0... 3... 6 18... 18... 17 0... 3... 6 18... 18... 16 0... 3... 6 18... 18... 16 Impedance Ω 50 VSWR < 1.5 Isolation, between ports db > 30 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. power per input W 300 (at 50 C ambient temperature) 0... 3... 6 18... 18... 17 Mechanical specifications Connector position Adjustment mechanism 2 x 7-16 female Bottom 1x, Position bottom continuously adjustable Wind load (at Rated N lbf Frontal: 295 66 Wind Speed: 150 km/h) Maximal: 325 73 Max. wind velocity km/h mph Height/width/depth Category of mounting hardware Weight kg lb Packing size Scope of supply 200 124 1670 / 155 / 70 65.7 / 6.1 / 2.8 M (Medium) 7 / 9.2 (clamps incl.) 15.4 / 20.3 (clamps incl.) 1934 x 172 x 92 76.1 x 6.8 x 3.6 Panel and 2 units of clamps for 42 115 1.7 4.5 diameter 50 For more information about additional mounting accessories please refer to page 85

2-Port Antenna Frequency Range HPBW R1 790 960 Y1 1710 2690 2-Port Antenna LB/HB 0.3m C 790 960 8dBi 1710 2690 9dBi Type No. 91121864 R1 Y1 790 960 1710 2690 Frequency range MHz 790 862 824 894 880 960 1710 1990 1920 2200 2200 2490 2490 2690 Polarization +45, 45 +45, 45 +45, 45 +45, 45 +45, 45 +45, 45 +45, 45 Average gain (dbi) dbi 2 x 7.8 2 x 8.0 2 x 8.5 2 x 7.8 2 x 8.9 2 x 8.7 2 x 8.2 Horizontal Pattern: Half-power beam width 67 65 55 60 62 Front-to-back ratio db Copolar: > 25 Copolar: > 25 Copolar: > 25 Copolar: > 25 Copolar: > 25 Copolar: > 25 Copolar: > 25 Cross polar ratio Maindirection 0 Sector ±60 db Typically: 15 > 8 Typically: 18 > 8 Typically: 20 > 8 Typically: 25 > 10 Typically: 25 > 10 Typically: 25 > 10 Typically: 25 > 10 Vertical Pattern: Half-power beam width 65 75 60 60 65 Impedance Ω 50 VSWR < 1.5 Isolation: Intrasystem db > 30 > 30 > 27 > 25 Intermodulation IM3 dbc < 150 dbc (2 x 43 dbm carrier) Max. effective power per port W 200 (at 50 C ambient temperature) 100 (at 50 C ambient temperature) Max. effective power for the antenna W 300 (at 50 C ambient temperature) 1710 2690 45 790 960 45 790 960 +45 1710 2690 +45 C C 7-16 7-16 Mechanical specifications 2 x 7-16 female Connector position Bottom Wind load (at Rated N lbf Frontal: 100 22 Wind Speed: 150 km/h) Maximal: 110 25 Max. wind velocity km/h mph 200 124 Height / width / depth Category of mounting hardware Weight Packing size Scope of Supply kg lb 334 / 260 / 136 13.1 / 10.2 / 5.4 L (Light) 2.8 (tension bands incl.) 6.2 (tension bands incl.) 495 x 272 x 157 19.5 x 10.7 x 6.2 Panel and 1 unit of tension bands for 45 125 1.8 4.9 diameter 2300 2600 MHz For more information about additional mounting accessories please refer to page 85 51

4-Port Antenna Frequency Range HPBW R1 698 960 Y1 1695 2690 4-Port Antenna LB/HB 0.6m 698 960 10.5dBi 1695 2690 13.5dBi Type No. 91121826 Lowband R1, connector 1 2 698 960 Frequency range MHz 698 824 MHz 824 894 MHz 880 960 MHz Polarization +45, 45 +45, 45 +45, 45 Average gain dbi 10.1 10.6 10.7 Horizontal Pattern: Half-power beam width 70 69 69 Front-to-back ratio Total power, ± 30 db > 23 > 25 > 25 Cross polar ratio Maindirection 0 Sector ±60 db Typically: 25 > 8 Typically: 28 > 10 Typically: 28 > 10 Vertical Pattern: Half-power beam width 40 36 35 Electrical tilt 2, fixed Impedance Ω 50 VSWR < 1.5 Isolation: Intrasystem db > 27, typ. > 30 > 30 > 28, typ. > 30 Isolation: Intersystem db > 26, typ. > 30 (R1 // Y1) Intermodulation IM3 dbc < 153 (2 x 43 dbm carrier) Max. effective power per port Max. effective power for the antenna W 250 (at 50 C ambient temperature) 400 (at 50 C ambient temperature) 52 For more information about additional mounting accessories please refer to page 85

4-Port Antenna 91121826 Highband Y1, connector 3 4 1695 2690 Frequency range MHz 1695 1880 1850 1990 1920 2180 2200 2490 2490 2690 Polarization +45, 45 +45, 45 +45, 45 +45, 45 +45, 45 Average gain dbi 13.1 13.7 13.7 13.8 13.6 Horizontal Pattern: Half-power beam width 62 55 55 55 68 Front-to-back ratio Total power, ± 30 db > 26 > 27 > 27 > 27 > 25 Cross polar ratio Maindirection 0 Sector ±60 db Typically: 25 > 10 Vertical Pattern: Half-power beam width 17.6 16.7 15.9 14.5 12.4 Electrical tilt 2, fixed Impedance Ω 50 VSWR < 1.5 Isolation: Intrasystem db > 26, typ. > 31 > 30, typ. > 31 Isolation: Intersystem db > 30 (Y1 // R1) Intermodulation IM3 dbc < 153 (2 x 43 dbm carrier) Max. effective power per port Max. effective power for the antenna W > 28 > 10 28 > 10 200 (at 50 C ambient temperature) 400 (at 50 C ambient temperature) Total power for the antenna W 800 (at 50 C ambient temperature) 25 > 10 28 > 10 Mechanical specifications 4 x 4.3-10 female Connector position Bottom Wind load (at Rated N lbf Frontal: 110 25 Wind Speed: 150 km/h) Maximal: 170 38 Max. wind velocity km/h mph 241 150 Height/width/depth Category of mounting hardware Weight kg lb Packing size Scope of supply 603 / 300 / 152 23.7 / 11.8 / 6.0 M (Medium) 8.5 / 10.7 (clamps incl.) 18.7 / 23.6 (clamps incl.) 845 x 325 x 193 33.3 x 12.8 x 7.6 Panel and 2 units of clamps for 42 115 1.7 4.5 diameter 2300 2600 MHz For more information about additional mounting accessories please refer to page 85 53

4-Port Antenna Frequency Range HPBW R1 790 960 Y1 1710 2690 4-Port Antenna LB/HB 1.4m 790 960 15dBi 1710 2690 17.5dBi Type No. 91121775 Lowband R1, connector 1 2 790 960 Frequency range MHz 790 862 824 894 880 960 Polarization +45, 45 +45, 45 +45, 45 Average gain Tilt dbi 14.5... 14.4... 14.2 0... 8... 16 14.6... 14.5... 14.3 0... 8... 16 14.8... 14.6... 14.4 0... 8... 16 Horizontal Pattern: Half-power beam width 69 68 67 Front-to-back ratio, copolar (180 ±30 ) db > 25 > 25 > 25 Cross polar ratio Maindirection 0 Sector ±60 db Typically: 25 > 10 Typically: 25 > 9 Typically: 25 > 8 Horizontal Pattern: Half-power beam width 16.5 16.0 15.5 Electrical tilt 0 16, continuously adjustable Sidelobe suppression for first sidelobe above main beam T db 0... 8... 16 16... 15... 15 0... 8... 16 16... 15... 15 Impedance Ω 50 VSWR < 1.5 Isolation: Intrasystem db > 30 Isolation: Intersystem db > 30 (698 960 // 1710 2690 MHz) Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. effective power per port Max. effective power for the antenna W 300 (at 50 C ambient temperature) 600 (at 50 C ambient temperature) 0... 8... 16 15... 15... 14 54 For more information about additional mounting accessories please refer to page 85

4-Port Antenna 91121775 Highband Y1, connector 3 4 1710 2690 Frequency range MHz 1710 1880 1850 1990 1920 2170 2300 2400 2490 2690 Polarization +45, 45 +45, 45 +45, 45 +45, 45 +45, 45 Average gain Tilt dbi 17.2... 17.3... 16.8 2... 6... 10 17.4... 17.4... 16.9 2... 6... 10 17.6... 17.7... 17.0 2... 6... 10 17.0... 16.8... 16.0 2... 6... 10 17.2... 17.3... 16.7 2... 6... 10 Horizontal Pattern: Half-power beam width 63 64 66 73 65 Front-to-back ratio, copolar (180 ±30 ) db > 25 > 28 > 29 > 26 > 25 Cross polar ratio Maindirection 0 Sector ±60 db Typically: 18 > 9 Horizontal Pattern: Half-power beam width 6.2 5.8 5.6 5.4 4.8 Electrical tilt 2 10, continuously adjustable Sidelobe suppression for first sidelobe above main beam T db 2... 6... 10 14... 15... 16 > 20 > 10 2... 6... 10 14... 15... 17 20 > 10 2... 6... 10 15... 16... 17 23 > 10 2... 6... 10 17... 18... 18 23 > 8 2... 6... 10 15... 17... 18 Impedance Ω 50 VSWR < 1.5 Isolation: Intrasystem db > 28 > 30 Isolation: Intersystem db > 30 (790 960 // 1710 2690 MHz) Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. effective power per port Max. effective power for the antenna W 200 (at 50 C ambient temperature) 400 (at 50 C ambient temperature) Mechanical specifications Connector position Adjustment mechanism 4 x 7-16 female (long neck) Bottom 2x, Position bottom continuously adjustable Wind load (at Rated N lbf Frontal: 260 58 Wind Speed: 150 km/h) Maximal: 415 93 Max. wind velocity Height / width / depth Category of mounting hardware Weight Packing size Scope of supply km/h mph kg lb 200 124 1403 / 300 / 152 55.2 / 11.8 / 6.0 M (Medium) 18 / 20 (clamps incl.) 39.7 / 44.1 (clamps incl.) 1726 x 322 x 190 68.0 x 12.7 x 7.5 Panel and 2 units of clamps for 42 115 1.7 4.5 diameter 2300 2600 MHz For more information about additional mounting accessories please refer to page 85 55

4-Port Antenna Frequency Range HPBW R1 790 960 Y1 1710 2690 4-Port Antenna LB/HB 2.0m 790 960 16dBi 1710 2690 18.5dBi Type No. 91121776V01 Lowband R1, connector 1 2 790 960 Frequency Range MHz 790 862 824 894 880 960 Gain at mid Tilt dbi 16.1 16.2 16.2 Gain over all Tilts dbi 15.9 ± 0.3 16.1 ± 0.2 16.1 ± 0.3 Horizontal Pattern: Azimuth Beamwidth 69 ± 0.9 68 ± 1.2 67 ± 0.6 Front-to-Back Ratio, Total Power, ± 30 db > 23 > 25 > 26 Cross Polar Discrimination at Boresight db > 23 > 23 > 20 Cross Polar Discrimination over Sector db > 9.5 > 10.0 > 11.0 Vertical Pattern: Elevation Beamwidth 10.1 ± 0.4 9.9 ± 0.3 9.5 ± 0.4 Electrical Downtilt continuously adjustable 0.0 10.0 Tilt Accuracy < 0.5 < 0.5 < 0.6 First Upper Side Lobe Suppression db > 16 > 18 > 16 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 16 > 18 > 16 Cross Polar Isolation db > 30 Port to Port Isolation db > 30 (R1 // Y1) Max. Effective Power per Port W 400 (at 50 C ambient temperature) Max. Effective Power Ports R1 W 800 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 56 For more information about additional mounting accessories please refer to page 85

4-Port Antenna 91121776V01 Highband Y1, connector 3 4 1710 2690 Frequency Range MHz 1710 1880 1850 1990 1920 2170 2300 2400 2490 2690 Gain at mid Tilt dbi 18.2 18.5 18.8 18.8 18.7 Gain over all Tilts dbi 18.1 ± 0.5 18.4 ± 0.2 18.7 ± 0.5 18.7 ± 0.6 18.5 ± 0.3 Horizontal Pattern: Azimuth Beamwidth 64 ± 5.4 63 ± 2.7 61 ± 3.6 62 ± 5.7 64 ± 3.4 Front-to-Back Ratio, Total Power, ± 30 db > 25 > 26 > 27 > 26 > 25 Cross Polar Discrimination at Boresight db > 14 > 19 > 20 > 18 > 20 Cross Polar Discrimination over Sector db > 8.0 > 9.5 > 10.0 > 10.0 > 11.5 Vertical Pattern: Elevation Beamwidth 5.0 ± 0.3 4.7 ± 0.2 4.4 ± 0.3 3.8 ± 0.2 3.5 ± 0.2 Electrical Downtilt continuously adjustable 2.0 8.0 Tilt Accuracy < 0.2 < 0.2 < 0.3 < 0.2 < 0.3 First Upper Side Lobe Suppression db > 17 > 18 > 19 > 20 > 20 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 15 > 16 > 16 > 15 > 17 Cross Polar Isolation db > 28 Port to Port Isolation db > 30 (R1 // Y1) Max. Effective Power per Port W 200 (at 50 C ambient temperature) Max. Effective Power Ports Y1 W 400 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Electrical specifications, all systems Impedance Ω 50 VSWR < 1.5 Return Loss db > 14 Interband Isolation db > 30 Passive Intermodulation dbc < 150 (2 x 43 dbm carrier) Polarization +45, 45 Max. Effective Power 900 (at 50 C ambient for the Antenna W temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifications Connector Position Adjustment Mechanism 4 x 7-16 female long neck bottom 2x, Position bottom continuously adjustable Wind load (at Rated N lbf Frontal: 390 88 Wind Speed: 150 km/h) Maximal: 620 139 Max. Wind Velocity Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply km/h mph kg lb 200 124 1997 / 300 / 152 78.6 / 11.8 / 6.0 M (Medium) 24.0 / 26.2 (clamps incl.) 52.9 / 57.8 (clamps incl.) 2316 / 322 / 190 91.2 / 12.7 / 7.5 Panel and 2 units of clamps for 42 115 1.7 4.5 diameter 2300 2600 MHz For more information about additional mounting accessories please refer to page 85 57

4-Port Antenna Frequency Range HPBW R1 698 960 Y1 1710 2690 4-Port Antenna LB/HB 2.6m 698 960 17dBi 1710 2690 18.5dBi Type No. 91121777V01 Lowband R1, connector 1 2 698 960 Frequency Range MHz 698 806 790 862 824 894 880 960 Gain at mid Tilt dbi 16.0 16.6 16.9 17.1 Gain over all Tilts dbi 16.0 ± 0.5 16.5 ± 0.4 16.8 ± 0.4 17.0 ± 0.2 Horizontal Pattern: Azimuth Beamwidth 71 ± 2.2 68 ± 1.0 68 ± 0.9 67 ± 1.5 Front-to-Back Ratio, Total Power, ± 30 db > 22 > 24 > 26 > 27 Cross Polar Discrimination at Boresight db > 23 > 22 > 22 > 21 Cross Polar Discrimination over Sector db > 8.0 > 8.5 > 9.5 > 8.5 Vertical Pattern: Elevation Beamwidth 8.4 ± 0.7 7.7 ± 0.4 7.5 ± 0.4 7.0 ± 0.3 Electrical Downtilt continuously adjustable 1.5 10.0 Tilt Accuracy < 0.3 < 0.3 < 0.3 < 0.3 First Upper Side Lobe Suppression db > 16 > 17 > 16 > 15 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 16 > 17 > 16 > 15 Cross Polar Isolation db > 30 Port to Port Isolation db > 30 (R1 // Y1) Max. Effective Power per Port W 400 (at 50 C ambient temperature) Max. Effective Power Ports R1 W 800 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 58 For more information about additional mounting accessories please refer to page 85

4-Port Antenna 91121777V01 Highband Y1, connector 3 4 1710 2690 Frequency Range MHz 1710 1880 1850 1990 1920 2170 2300 2400 2490 2690 Gain at mid Tilt dbi 18.0 18.5 18.8 18.6 19.0 Gain over all Tilts dbi 18.0 ± 0.4 18.5 ± 0.4 18.7 ± 0.4 18.5 ± 0.7 18.8 ± 0.4 Horizontal Pattern: Azimuth Beamwidth 64 ± 3.4 62 ± 2.9 62 ± 2.2 60 ± 4.8 60 ± 2.0 Front-to-Back Ratio, Total Power, ± 30 db > 25 > 26 > 27 > 25 > 26 Cross Polar Discrimination at Boresight db > 15 > 18 > 20 > 16 > 21 Cross Polar Discrimination over Sector db > 8.0 > 11.0 > 11.0 > 10.0 > 9.5 Vertical Pattern: Elevation Beamwidth 5.0 ± 0.4 4.7 ± 0.2 4.4 ± 0.4 3.9 ± 0.2 3.5 ± 0.2 Electrical Downtilt continuously adjustable 2.0 8.0 Tilt Accuracy < 0.2 < 0.2 < 0.2 < 0.2 < 0.2 First Upper Side Lobe Suppression db > 19 > 18 > 20 > 20 > 18 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 16 > 16 > 16 > 16 > 17 Cross Polar Isolation db > 28 Port to Port Isolation db > 30 (R1 // Y1) Max. Effective Power per Port W 200 (at 50 C ambient temperature) Max. Effective Power Ports Y1 W 400 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Electrical specifications, all systems Impedance Ω 50 VSWR < 1.5 Return Loss db > 14 Interband Isolation db > 30 Passive Intermodulation dbc < 150 (2 x 43 dbm carrier) Polarization +45, 45 Max. Effective Power 900 (at 50 C ambient for the Antenna W temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifications Connector Position Adjustment Mechanism 4 x 7-16 female long neck bottom 2x, Position bottom continuously adjustable Wind load (at Rated N lbf Frontal: 530 119 Wind Speed: 150 km/h) Maximal: 845 190 Max. Wind Velocity Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply km/h mph kg lb 200 124 2622 / 300 / 152 103.2 / 11.8 / 6.0 H (Heavy) 29.0 / 31.2 (clamps incl.) 63.9 / 68.8 (clamps incl.) 2951 / 322 / 190 116.2 / 12.7 / 7.5 Panel and 2 units of clamps for 42 115 1.7 4.5 diameter 2300 2600 MHz For more information about additional mounting accessories please refer to page 85 59

4-Port Antenna Frequency Range HPBW Y1 1695 2690 Y2 1695 2690 4-Port Antenna 2HB 1.5m 2x1695 2690 18dBi ESLS Type No. 91131733 Left side, highband Y1, connector 1 2 1695 2690 Frequency Range MHz 1695 1880 1920 2180 2300 2400 2490 2690 Gain at mid Tilt dbi 17.4 18.0 18.6 18.8 Gain over all Tilts dbi 17.3 ± 0.4 17.9 ± 0.4 18.3 ± 0.4 18.6 ± 0.4 Horizontal Pattern: Azimuth Beamwidth 66 ± 3.2 63 ± 2.6 60 ± 3.5 56 ± 2.6 Front-to-Back Ratio, Total Power, ± 30 db > 24 > 24 > 26 > 23 Cross Polar Discrimination at Boresight db > 22 > 22 > 22 > 18 Cross Polar Discrimination over Sector db > 12.5 > 10.0 > 9.5 > 13.0 Vertical Pattern: Elevation Beamwidth 6.8 ± 0.5 6.1 ± 0.5 5.2 ± 0.3 4.9 ± 0.3 Electrical Downtilt continuously adjustable 2.0 14.0 Tilt Accuracy < 0.3 < 0.3 < 0.2 < 0.2 First Upper Side Lobe Suppression db > 20 > 20 > 20 > 20 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 17 > 17 > 16 > 16 Cross Polar Isolation db > 30 Port to Port Isolation db > 30 (Y1 // Y2) Max. Effective Power per Port W 250 (at 50 C ambient temperature) Max. Effective Power Ports Y1 W 500 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 60 For more information about additional mounting accessories please refer to page 85

4-Port Antenna 91131733 Right side, highband Y2, connector 3 4 1695 2690 Frequency Range MHz 1695 1880 1920 2180 2300 2400 2490 2690 Gain at mid Tilt dbi 17.2 17.9 18.6 18.9 Gain over all Tilts dbi 17.1 ± 0.4 17.8 ± 0.5 18.4 ± 0.4 18.7 ± 0.5 Horizontal Pattern: Azimuth Beamwidth 68 ± 3.8 64 ± 4.1 59 ± 2.6 55 ± 2.0 Front-to-Back Ratio, Total Power, ± 30 db > 25 > 26 > 25 > 23 Cross Polar Discrimination at Boresight db > 22 > 22 > 22 > 19 Cross Polar Discrimination over Sector db > 13.5 > 11.0 > 9.5 > 12.0 Vertical Pattern: Elevation Beamwidth 6.8 ± 0.4 6.0 ± 0.5 5.2 ± 0.3 4.8 ± 0.2 Electrical Downtilt continuously adjustable 2.0 14.0 Tilt Accuracy < 0.3 < 0.3 < 0.2 < 0.2 First Upper Side Lobe Suppression db > 19 > 19 > 20 > 20 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 18 > 17 > 17 > 15 Cross Polar Isolation db > 30 Port to Port Isolation db > 30 (Y2 // Y1) Max. Effective Power per Port W 250 (at 50 C ambient temperature) Max. Effective Power Ports Y2 W 500 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Electrical specifications, all systems Impedance Ω 50 VSWR < 1.5 Return Loss db > 14 Interband Isolation db > 30 Passive Intermodulation dbc < 153 (2 x 43 dbm carrier) Polarization 45, +45 Max. Effective Power 700 (at 50 C ambient for the Antenna W temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifications Connector Position Adjustment Mechanism 4 x 4.3-10 female bottom 2x, Position bottom continuously adjustable Wind load (at Rated N lbf Frontal: 565 127 Wind Speed: 150 km/h) Maximal: 620 139 Max. Wind Velocity Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply km/h mph kg lb 200 124 1471 / 275 / 86 57.9 / 10.8 / 3.4 M (Medium) 13.0 / 15.2 (clamps incl.) 28.7 / 33.5 (clamps incl.) 1791 / 298 / 119 70.5 / 11.7 / 4.7 Panel and 2 units of clamps for 42 115 1.7 4.5 diameter 2300 2600 MHz For more information about additional mounting accessories please refer to page 85 61

6-Port Antenna Frequency Range HPBW R1 Y1 Y2 698 960 1695 2690 1695 2690 6-Port Antenna LB/2HB 1.4m 698 960 14.5dBi 2x1695 2690 18dBi Type No. 91121975 Left side, lowband R1, connector 1 2 698 960 Frequency Range MHz 698 806 790 862 824 894 880 960 Gain at mid Tilt dbi 13.5 14.0 14.2 14.5 Gain over all Tilts dbi 13.5 ± 0.3 14.0 ± 0.4 14.2 ± 0.3 14.4 ± 0.3 Horizontal Pattern: Azimuth Beamwidth 72 ± 3.2 70 ± 2.7 68 ± 2.4 67 ± 2.2 Front-to-Back Ratio, Total Power, ± 30 db > 22 > 24 > 24 > 25 Cross Polar Discrimination at Boresight db > 23 > 23 > 24 > 22 Cross Polar Discrimination over Sector db > 7.0 > 7.0 > 7.0 > 7.5 Azimuth Beam Port-to-Port Tracking db < 2.0 < 1.5 < 2.0 < 2.5 Vertical Pattern: Elevation Beamwidth 17.4 ± 1.1 16.2 ± 1.1 15.7 ± 0.7 14.9 ± 0.8 Electrical Downtilt continuously adjustable 2.0 16.0 Tilt Accuracy < 0.6 < 0.8 < 0.6 < 0.5 First Upper Side Lobe Suppression db > 15 > 16 > 16 > 19 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 22 > 20 > 20 > 20 Cross Polar Isolation db > 30 Port to Port Isolation db > 30 (R1 // Y1, Y2) Max. Effective Power per Port W 300 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Left side, highband Y1, connector 3 4 1695 2690 Frequency Range MHz 1695 1880 1850 1990 1920 2180 2300 2400 2500 2690 Gain at mid Tilt dbi 17.3 17.5 17.6 17.2 17.6 Gain over all Tilts dbi 17.2 ± 0.6 17.5 ± 0.3 17.5 ± 0.3 17.1 ± 0.4 17.5 ± 0.6 Horizontal Pattern: Azimuth Beamwidth 62 ± 3.9 61 ± 3.0 62 ± 3.3 66 ± 6.8 64 ± 5.8 Front-to-Back Ratio, Total Power, ± 30 db > 24 > 28 > 26 > 24 > 24 Cross Polar Discrimination at Boresight db > 16 > 20 > 23 > 18 > 15 Cross Polar Discrimination over Sector db > 7.0 > 9.0 > 10.5 > 8.5 > 9.5 Azimuth Beam Port-to-Port Tracking db < 1.5 < 2.5 < 2.5 < 2.0 < 2.0 Vertical Pattern: Elevation Beamwidth 6.7 ± 0.4 6.3 ± 0.3 6.0 ± 0.5 5.3 ± 0.2 4.8 ± 0.3 Electrical Downtilt continuously adjustable 2.5 12.0 Tilt Accuracy < 0.3 < 0.2 < 0.2 < 0.2 < 0.2 First Upper Side Lobe Suppression db > 17 > 17 > 18 > 19 > 15 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 14 > 14 > 14 > 14 > 14 Cross Polar Isolation db > 28 Port to Port Isolation db > 30 (Y1 // R1, Y2) Max. Effective Power per Port W 200 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 62 For more information about additional mounting accessories please refer to page 85

6-Port Antenna 91121975 Right side, highband Y2, connector 5 6 1695 2690 Frequency Range MHz 1695 1880 1850 1990 1920 2180 2300 2400 2500 2690 Gain at mid Tilt dbi 17.2 17.5 17.8 18.2 18.3 Gain over all Tilts dbi 17.2 ± 0.4 17.4 ± 0.3 17.7 ± 0.4 18.1 ± 0.3 18.1 ± 0.4 Horizontal Pattern: Azimuth Beamwidth 65 ± 2.4 63 ± 3.2 63 ± 2.9 61 ± 2.0 61 ± 2.5 Front-to-Back Ratio, Total Power, ± 30 db > 24 > 23 > 23 > 24 > 25 Cross Polar Discrimination at Boresight db > 22 > 24 > 24 > 20 > 18 Cross Polar Discrimination over Sector db > 15.5 > 15.0 > 13.0 > 7.5 > 9.5 Azimuth Beam Port-to-Port Tracking db < 1.0 < 1.0 < 1.0 < 1.5 < 2.0 Vertical Pattern: Elevation Beamwidth 7.1 ± 0.4 6.7 ± 0.4 6.4 ± 0.4 5.5 ± 0.3 5.0 ± 0.3 Electrical Downtilt continuously adjustable 2.5 12.0 Tilt Accuracy < 0.2 < 0.2 < 0.2 < 0.3 < 0.2 First Upper Side Lobe Suppression db > 21 > 21 > 22 > 18 > 19 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 14 > 15 > 15 > 15 > 16 Cross Polar Isolation db > 28 Port to Port Isolation db > 30 (Y2 // R1, Y1) Max. Effective Power per Port W 200 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Electrical specifications, all systems Impedance Ω 50 VSWR < 1.5 Return Loss db > 14 Interband Isolation db > 30 Passive Intermodulation dbc < 150 (2 x 43 dbm carrier) Polarization +45, 45 Max. Effective Power 900 (at 50 C ambient for the Antenna W temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifications Connector Position Adjustment Mechanism 6 x 7-16 female bottom FlexRET, continuously adjustable Wind load (at Rated N lbf Frontal: 450 101 Wind Speed: 150 km/h) Maximal: 520 117 Max. Wind Velocity Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply km/h mph kg lb 241 150 1402 / 377 / 169 55.2 / 14.8 / 6.7 H (Heavy) 25.0 / 27.2 (clamps incl.) 55.1 / 59.9 (clamps incl.) 1602 / 397 / 212 63.1 / 15.6 / 8.3 Panel, FlexRET and 2 units of clamps for 42 115 1.7 4.5 diameter 2300 2600 MHz For more information about additional mounting accessories please refer to page 85 63

6-Port Antenna Frequency Range HPBW R1 Y1 Y2 698 960 1695 2690 1695 2690 6-Port Antenna LB/2HB 1.9m 698 960 16dBi 2x1695 2690 18dBi Type No. 91121976 Left side, lowband R1, connector 1 2 698 960 Frequency Range MHz 698 806 790 862 824 894 880 960 Gain at mid Tilt dbi 15.2 15.7 15.9 16.2 Gain over all Tilts dbi 15.2 ± 0.5 15.6 ± 0.3 15.8 ± 0.4 16.1 ± 0.3 Horizontal Pattern: Azimuth Beamwidth 69 ± 2.3 68 ± 2.1 67 ± 2.0 67 ± 1.4 Front-to-Back Ratio, Total Power, ± 30 db > 23 > 25 > 26 > 26 Cross Polar Discrimination at Boresight db > 23 > 22 > 23 > 22 Cross Polar Discrimination over Sector db > 8.0 > 8.0 > 9.0 > 8.0 Azimuth Beam Port-to-Port Tracking db < 2.0 < 2.0 < 2.0 < 2.0 Vertical Pattern: Elevation Beamwidth 10.8 ± 1.1 9.8 ± 0.4 9.5 ± 0.6 8.9 ± 0.4 Electrical Downtilt continuously adjustable 2.0 12.0 Tilt Accuracy < 0.5 < 0.5 < 0.4 < 0.5 First Upper Side Lobe Suppression db > 14 > 16 > 16 > 15 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 15 > 16 > 17 > 16 Cross Polar Isolation db > 30 Port to Port Isolation db > 30 (R1 // Y1,Y2) Max. Effective Power per Port W 400 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Left side, highband Y1, connector 3 4 1695 2690 Frequency Range MHz 1695 1880 1850 1990 1920 2180 2300 2400 2500 2690 Gain at mid Tilt dbi 17.3 17.7 17.9 17.6 18.1 Gain over all Tilts dbi 17.2 ± 0.5 17.6 ± 0.3 17.7 ± 0.3 17.5 ± 0.5 17.9 ± 0.6 Horizontal Pattern: Azimuth Beamwidth 65 ± 4.2 62 ± 2.6 61 ± 2.4 63 ± 6.1 66 ± 6.8 Front-to-Back Ratio, Total Power, ± 30 db > 26 > 27 > 26 > 23 > 23 Cross Polar Discrimination at Boresight db > 16 > 20 > 24 > 18 > 15 Cross Polar Discrimination over Sector db > 7.5 > 8.5 > 10.5 > 8.5 > 9.0 Azimuth Beam Port-to-Port Tracking db < 2.5 < 2.5 < 2.0 < 2.5 < 2.0 Vertical Pattern: Elevation Beamwidth 6.3 ± 0.4 5.9 ± 0.3 5.6 ± 0.4 4.9 ± 0.2 4.4 ± 0.3 Electrical Downtilt continuously adjustable 2.5 12.0 Tilt Accuracy < 0.2 < 0.2 < 0.2 < 0.1 < 0.1 First Upper Side Lobe Suppression db > 19 > 17 > 17 > 16 > 16 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 14 > 14 > 13 > 13 > 14 Cross Polar Isolation db > 28 Port to Port Isolation db > 30 (Y1 // R1, Y2) Max. Effective Power per Port W 200 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 64 For more information about additional mounting accessories please refer to page 85

6-Port Antenna 91121976 Right side, highband Y2, connector 5 6 1695 2690 Frequency Range MHz 1695 1880 1850 1990 1920 2180 2300 2400 2500 2690 Gain at mid Tilt dbi 17.3 17.5 17.8 18.2 18.1 Gain over all Tilts dbi 17.3 ± 0.3 17.5 ± 0.3 17.8 ± 0.4 18.1 ± 0.3 17.9 ± 0.6 Horizontal Pattern: Azimuth Beamwidth 65 ± 2.9 66 ± 2.8 66 ± 2.6 65 ± 1.8 68 ± 4.8 Front-to-Back Ratio, Total Power, ± 30 db > 22 > 24 > 24 > 25 > 26 Cross Polar Discrimination at Boresight db > 15 > 19 > 18 > 17 > 19 Cross Polar Discrimination over Sector db > 10.5 > 15.0 > 14.5 > 10.0 > 10.0 Azimuth Beam Port-to-Port Tracking db < 1.0 < 1.0 < 1.0 < 0.5 < 2.5 Vertical Pattern: Elevation Beamwidth 7.1 ± 0.4 6.7 ± 0.3 6.3 ± 0.5 5.6 ± 0.3 5.0 ± 0.3 Electrical Downtilt continuously adjustable 2.5 12.0 Tilt Accuracy < 0.3 < 0.3 < 0.3 < 0.3 < 0.3 First Upper Side Lobe Suppression db > 19 > 25 > 25 > 19 > 21 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 13 > 15 > 17 > 17 > 15 Cross Polar Isolation db > 28 Port to Port Isolation db > 30 (Y2 // R1, Y1) Max. Effective Power per Port W 200 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Electrical specifications, all systems Impedance Ω 50 VSWR < 1.5 Return Loss db > 14 Interband Isolation db > 30 Passive Intermodulation dbc < 150 (2 x 43 dbm carrier) Polarization +45, 45 Max. Effective Power 900 (at 50 C ambient for the Antenna W temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifications Connector Position Adjustment Mechanism 6 x 7-16 female bottom FlexRET, continuously adjustable Wind load (at Rated N lbf Frontal: 630 142 Wind Speed: 150 km/h) Maximal: 730 164 Max. Wind Velocity Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply km/h mph kg lb 241 150 1921 / 377 / 169 75.6 / 14.8 / 6.7 H (Heavy) 30.0 / 32.2 (clamps incl.) 66.1 / 70.9 (clamps incl.) 2121 / 397 / 212 83.5 / 15.6 / 8.3 Panel, FlexRET and 2 units of clamps for 42 115 1.7 4.5 diameter 2300 2600 MHz For more information about additional mounting accessories please refer to page 85 65

6-Port Antenna Frequency Range HPBW R1 Y1 Y2 698 960 1710 2690 1710 2690 6-Port Antenna LB/2HB 2.4m 698 960 17dBi 2x1695 2690 18dBi Type No. 91121977 Left side, lowband R1, connector 1 2 698 960 Frequency Range MHz 698 820 790 862 824 894 880 960 Gain at mid Tilt dbi 16.3 16.8 17.0 17.3 Gain over all Tilts dbi 16.2 ± 0.5 16.8 ± 0.4 17.0 ± 0.3 17.3 ± 0.2 Horizontal Pattern: Azimuth Beamwidth 67 ± 2.4 65 ± 1.4 65 ± 0.9 64 ± 1.3 Front-to-Back Ratio, Total Power, ± 30 db > 21 > 24 > 26 > 27 Cross Polar Discrimination at Boresight db > 24 > 25 > 25 > 26 Cross Polar Discrimination over Sector db > 6.5 > 7.0 > 9.0 > 10.0 Azimuth Beam Port-to-Port Tracking db < 2.0 < 2.5 < 2.0 < 2.0 Vertical Pattern: Elevation Beamwidth 8.7 ± 0.7 7.9 ± 0.5 7.6 ± 0.4 7.2 ± 0.4 Electrical Downtilt continuously adjustable 1.0 10.0 Tilt Accuracy < 0.3 < 0.4 < 0.4 < 0.4 First Upper Side Lobe Suppression db > 17 > 17 > 17 > 18 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 16 > 15 > 15 > 16 Cross Polar Isolation db > 30 Port to Port Isolation db > 30 (R1 // Y1,Y2) Max. Effective Power per Port W 400 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Left side, highband Y1, connector 3 4 1695 2690 Frequency Range MHz 1695 1880 1850 1990 1920 2180 2300 2400 2490 2690 Gain at mid Tilt dbi 17.4 17.9 17.9 17.3 18.1 Gain over all Tilts dbi 17.3 ± 0.5 17.8 ± 0.3 17.8 ± 0.3 17.2 ± 0.2 17.9 ± 0.7 Horizontal Pattern: Azimuth Beamwidth 65 ± 4.5 62 ± 3.0 62 ± 2.6 69 ± 4.9 63 ± 6.4 Front-to-Back Ratio, Total Power, ± 30 db > 25 > 25 > 25 > 24 > 23 Cross Polar Discrimination at Boresight db > 16 > 22 > 24 > 19 > 16 Cross Polar Discrimination over Sector db > 8.5 > 10.5 > 11.0 > 8.5 > 7.5 Azimuth Beam Port-to-Port Tracking db < 1.5 < 2.5 < 2.0 < 1.5 < 2.5 Vertical Pattern: Elevation Beamwidth 6.3 ± 0.4 5.9 ± 0.2 5.6 ± 0.4 4.9 ± 0.1 4.5 ± 0.3 Electrical Downtilt continuously adjustable 2.5 12.0 Tilt Accuracy < 0.5 < 0.4 < 0.4 < 0.3 < 0.3 First Upper Side Lobe Suppression db > 19 > 18 > 17 > 16 > 18 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 13 > 14 > 13 > 14 > 15 Cross Polar Isolation db > 28 Port to Port Isolation db > 30 (Y1 // R1, Y2) Max. Effective Power per Port W 200 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 66 For more information about additional mounting accessories please refer to page 85

6-Port Antenna 91121977 Right side, highband Y2, connector 5 6 1695 2690 Frequency Range MHz 1695 1880 1850 1990 1920 2180 2300 2400 2490 2690 Gain at mid Tilt dbi 17.4 17.7 18.0 18.4 18.6 Gain over all Tilts dbi 17.4 ± 0.3 17.6 ± 0.3 17.9 ± 0.5 18.3 ± 0.3 18.4 ± 0.5 Horizontal Pattern: Azimuth Beamwidth 62 ± 2.3 62 ± 2.0 61 ± 1.9 60 ± 1.7 58 ± 3.6 Front-to-Back Ratio, Total Power, ± 30 db > 24 > 25 > 25 > 25 > 23 Cross Polar Discrimination at Boresight db > 22 > 23 > 21 > 16 > 16 Cross Polar Discrimination over Sector db > 16.0 > 16.0 > 13.0 > 8.0 > 7.5 Azimuth Beam Port-to-Port Tracking db < 1.5 < 1.0 < 1.0 < 1.5 < 2.0 Vertical Pattern: Elevation Beamwidth 7.1 ± 0.4 6.6 ± 0.3 6.3 ± 0.4 5.6 ± 0.4 5.0 ± 0.3 Electrical Downtilt continuously adjustable 2.5 12.0 Tilt Accuracy < 0.2 < 0.3 < 0.3 < 0.4 < 0.2 First Upper Side Lobe Suppression db > 21 > 24 > 23 > 19 > 23 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 14 > 15 > 15 > 15 > 17 Cross Polar Isolation db > 28 Port to Port Isolation db > 30 (Y2 // R1, Y1) Max. Effective Power per Port W 200 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Electrical specifications, all systems Impedance Ω 50 VSWR < 1.5 Return Loss db > 14 Interband Isolation db > 30 Passive Intermodulation dbc < 150 (2 x 43 dbm carrier) Polarization +45, 45 Max. Effective Power 900 (at 50 C ambient for the Antenna W temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifications Connector Position Adjustment Mechanism 6 x 7-16 female bottom FlexRET, continuously adjustable Wind load (at Rated N lbf Frontal: 830 187 Wind Speed: 150 km/h) Maximal: 960 216 Max. Wind Velocity Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply km/h mph kg lb 200 124 2441 / 377 / 169 96.1 / 14.8 / 6.7 H (Heavy) 35.0 / 37.2 (clamps incl.) 77.1 / 81.9 (clamps incl.) 2641 / 397 / 212 104.0 / 15.6 / 8.3 Panel, FlexRET and 2 units of clamps for 42 115 1.7 4.5 diameter 2300 2600 MHz For more information about additional mounting accessories please refer to page 85 67

4-Port Micro Cell Antenna Dual Polarization HPBW 1695 2690 1695 2690 X X 85 85 4-Port Micro Cell Antenna 2HB 0.5m 85 2x1695 2690 7.5dBi Type No. 91121954 Use case Flexible Indoor Coverage Flexible Street Level Micro Cell Coverage Not for Macro Site Installation Pole and wall mounting Electrical data Per sector 1695 2690 Frequency range MHz 1695 2690 Polarization +45, 45 Gain dbi 7.5 Horizontal Pattern: Half-power beam width 85 Cross polar ratio 0 60 db 18 typ. 8 typ. Vertical Pattern: Half-power beam width 80 Electrical tilt (upright installation) 0, fixed Impedance Ω 50 Ω VSWR 1695 1710 MHz: < 1.6 1710 2200 MHz: < 1.5 2200 2690 MHz: < 1.6 Isolation, between all db 25 (Intra- / Intersystem) ports Intermodulation IM3 dbc < 153 (2 x 43 dbm carrier) Max. power per input W 50 (at 50 C ambient temperature) Antenna in upright pole installation Connectors (4.3-10) covered by end cap Top view / connector view 1695-2690 Mechanical specifications Adjustment mechanism Tilt adjustment mechanism (installation at right angle) Azimuth adjustment mechanism (upright installation) IP Protection class Wind load (at 150 km/h) Max. wind velocity Feeder cables Allowed diameter of mounting pole N lbf km/h mph Max. distance wall/pole when mounted Height / diameter 4 x 4.3-10 female (2 x top, 2 x bottom, covered by end cap) Two continuously rotatable antenna modules (radiator and reflector) within the radome (set by hand) Set by hand Continuously for each sector (0 360 ) Set by hand Continuously for each sector (0 360 ) IP65 25 5.6 160 99.4 Max. ¼ High Flex (bending radius 25 1.0 ) push pull and handscrew type, angular connector required 40 1.6 190 7.5 526 / 100 20.7 / 3.9 Category of mounting hardware L (Light) Weight kg 2.0 lb 4.4 Packing size 547 / 242 / 174 21.5 / 9.5 / 6.9 68

Omni Slimpole Antenna Dual Polarization HPBW 1710 2690 X 360 2-Port Omni Slimpole 1710 2690 360 5dBi Type No. 91121237 1710 2690 Frequency range MHz 1710 1990 1920 2170 2170 2490 2490 2690 Polarization +45, 45 +45, 45 +45, 45 +45, 45 Gain dbi 2 x 5 2 x 5 2 x 5 2 x 5 Horizontal Pattern: Half-power beam width Omni Omni Omni Omni Deviation from db ±1 ±1 ±1.5 ±1.5 circularity Vertical Pattern: Half-power beam width 42 40 36 33 Electrical tilt 0, fixed Impedance Ω 50 VSWR < 1.5 Isolation, db > 30 between ports Intermodulation IM3 dbc 80010126: < 150 (2 x 43 dbm carrier) Max. power per input W 100 (at 50 C ambient temperature) 2300 2600 MHz 691 27.2 Mechanical specifications Connector position Weight Wind load (at 150 km/h) Max. wind velocity Mechanical interface Packing size Height / diameter kg lb N lbf km/h mph 2 x N female Bottom 2.3 5.1 50 11.2 200 124 Flange connection 8 x M6 at a graduated diameter of 136 5.4. Evenness of the opposite surface: 0.5 0.02 740 x 220 x 220 29.1 x 8.7 x 8.7 691 / 100 27.2 / 3.9 69

1-Port Omni Antenna Vertical Polarization Indoor and outdoor use 1695 2700 V 1-Port Omni Antenna HB 0.1m 360 1695 2700 2dBi Type No. 91121542 1 x N female Connector position Bottom or top Frequency range MHz 1695 2700 VSWR < 1.8 Gain dbi 2 Impedance Ω 50 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Polarization Vertical Max. power W 50 (at 50 C ambient temperature) Weight g lb 150 0.33 Radome diameter Height 20 0.8 115 4.5 Fire load kwh 0.07 115 4.5 Material: Mounting: Grounding: Radiator: Brass. Radome: Fiberglass, color: White. One hole mounting (16 0.6 iches diameter) to surfaces of max. 10 0.4 thickness. All metal parts of the antenna and the mounting kit are DC grounded. The inner conductor is not DC grounded. 70

1-Port Omni Antenna Vertical Polarization Indoor and outdoor use 694 960/1695 2700 V 1-Port Omni Antenna LB/HB 0.2m 360 694 960/1695 2700 2dBi Type No. 91121957 1 x N female Connector position Bottom or top Frequency range MHz 694 960 / 1695 2700 VSWR MHz 694 864 < 2.0 864 894 < 2.2 894 960 < 2.5 Gain dbi 2 Impedance Ω 50 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Polarization Vertical Max. power W 50 (at 50 C ambient temperature) Weight Wind load (at 150 km/h) Radome diameter Height g lb N lbf 210 0.46 6 1.3 30 1.2 202 8.0 Fire load kwh 0.2 1695 2700 < 2.0 202 8.0 Material: Mounting: Radiator: Brass. Radome: Fiberglass, colour: White. One hole mounting (16 0.6 diameter) to surfaces of max. 10 0.4 thickness. 71

2-Port Indoor Antenna Dual Polarization HPBW Integrated Combiner 694 960 X 80 1710 2690 X C 2-Port Indoor Antenna LB/HB C 0.4m 80 / 694 960 7dBi 710 2690 8dBi Type No. 91121993 Frequency range MHz 694 960 1710 2690 Polarization +45, 45 +45, 45 Gain dbi 7 8 Half-power beam width; hor., ver. typ. 80 typ. 65 Impedance Ω 50 VSWR 694 960 MHz: 2.2 1710 2690 MHz: 2.2 Isolation, between ports db 694 806 MHz: 16 806 960 MHz: 20 1710 2690 MHz: 20 Max. power per port W 20 (at 50 C ambient temperature) Passive Intermodulation PIM 3 dbc < 140 (at 2 x 40 dbm carrier) 2 x 4.3-10 female Protection class IP 30 Weight kg lb 1.6 3.5 Packing size 417 / 281 / 141 16.4 / 11.1 / 5.6 Height/width/depth 399 / 237 / 63 15.7 / 9.3 / 2.5 Operating C 5 +55 temperature range Fire protection classification UL 94-V2 Fire load kwh 5.3 694 960 45 C 4.3-10 1710 2690 45 694 960 +45 C 4.3-10 1710 2690 +45 Material: Mounting: Available accessories: Reflector: Brass. Radome: ASA / PC, colour: White. Position: Wall and ceiling possible. The antenna is mounted with four screws (4.5 0.18 nominal diameter, srew head dia meter max. 9 0.35 ). Screws are not supplied. After antenna mounting install the antenna cover. Broadband power splitters and tappers (380 5920 MHz). 205 8.1 260 10.2 Antenna rearside with four drilling holes Antenna and antenna cover All dimensions in 72

2-Port Indoor MIMO Omni Antenna Vertical Polarization 694 5920 694 5920 The antenna can be operated in all indicated frequency ranges simultaneously. V V 2-Port Indoor Omni Antenna 694 5920 360 2dBi Type No. 91121823 Frequency range Port 1 and Port 2 MHz Port 1 694 960 1427 1518 1695 2690 3400 3800 4920 5920 Port 2 694 960 1427 1518 1695 2690 3400 3800 4920 5920 Polarization Dual Vertical Gain, typ. dbi 2 Gain, max. dbi 694 960 MHz: 4.0 5.5 1427 1518 MHz: 5.0 5.5 1695 2690 MHz: 5.0 7.5 3400 3800 MHz: 5.5 7.0 4920 5920 MHz: 7.0 8.0 Impedance Ω 50 VSWR 694 960 MHz: < 2.0 1427 1518 MHz: < 2.0 1695 2690 MHz: < 2.0 3400 3800 MHz: < 2.0 4920 5920 MHz: < 2.0 Isolation db 694 960 MHz: > 20 1427 1518 MHz: > 20 1695 2690 MHz: > 20 3400 3800 MHz: > 20 4920 5920 MHz: > 20 Intermodulation IM3 (2 x 40 dbm carrier) dbc 694 960 MHz: < 150 1427 1518 MHz: < 150 1695 2690 MHz: < 150 3400 3800 MHz: < 150 4920 5920 MHz: not relevant Max. power per input (at 50 C ambient temperature) Max. effektive power for the antenna W 694 960 MHz: 20 1427 1518 MHz: 20 1695 2690 MHz: 20 3400 3800 MHz: 10 4920 5920 MHz: 5 W 20 (at 50 C ambient temperature) 2 x 4.3-10 female (angular connector required) Protection class IP 30 Weight g 950 lb 2.1 Packing size Diameter (antenna module) Height (antenna module) 350 x 350 x 150 13.8 x 13.8 x 5.9 320 12.6 89 3.5 Fire load kwh 3.18 Material: Mounting: Reflector: Aluminum. Radome: ASA/PC blend, colour: White. Additional painting is possible. On-ceiling mounting: Mounting kit 85010200 required Concealed antenna installation (ceiling thickness 3 35 0.12 1.38 ): Mounting kit 85010201 required Hidden antenna installation in double l ayer ceiling, floors or similar no additional mounting kit required Accessories (order separately if required) Type No. Description 85010200 On-ceiling mounting kit 85010201 Support ring for concealed antenna installation 73

74

Suary Splitters, Tappers, Dual-Band Combiners, Low Noise Amplifier Type Type No. Frequency range Remark Max. power Connector female Page Splitters 2-way Splitter 350 3800 92210012 350 3800 MHz Indoor/Outdoor 300 W 4.3-10 76 + 77 3-way Splitter 350 3800 92210013 350 3800 MHz Indoor/Outdoor 300 W 4.3-10 76 + 77 4-way Splitter 350 3800 92210014 350 3800 MHz Indoor/Outdoor 300 W 4.3-10 76 + 77 2-way Splitter 380 3800 97121242 380 3800 MHz Indoor/Outdoor 700 W 7-16 78 3-way Splitter 380 512 K7431348 380 512 MHz Indoor/Outdoor 1000 W 7-16 79 4-way Splitter 380 512 K7431358 380 512 MHz Indoor/Outdoor 1000 W 7-16 79 2-way Splitter 694 3800 97131128 694 3800 MHz Indoor/Outdoor 100 W 4.3-10 80 3-way Splitter 694 3800 97131129 694 3800 MHz Indoor/Outdoor 100 W 4.3-10 80 4-way Splitter 694 3800 97131120 694 3800 MHz Indoor/Outdoor 100 W 4.3-10 80 Tappers Continuously adjustable ratio Multi-band Tapper 380 960/1695 2700/ 3400 3800/4920 5920 5.0 20.0dB 97131271 380 960 MHz 1695 2700 MHz 3400 3800 MHz 4920 5920 MHz Indoor/Outdoor 100 W 4.3-10 81 Dual-Band Combiners Dual-Band Combiner (PMR, TETRA, TETRAPOL, CDMA 800, GSM 900, GSM 1800, UMTS, WLAN) More Combiners on request available 89321571 50 470 MHz 790 2500 MHz Indoor/Outdoor 500 W 7-16 82 + 83 Low Noise Amplifier GPS Low Noise Amplifier GPS 97121253 1575.42 MHz TNC N 84 Mechanical Accessories and Remote Electrical Tilt Product Line of Mounting Parts for Panel Antennas 85 Side-mounting Brackets for Omni Antennas 86 + 87 Kathrein s Remote Electrical Tilt System (RET) 88 + 89 New or changed product Accessories 75

Low-loss Power Splitters Multi-band Connector 4.3-10 350 3800 For indoor and outdoor use. 2-way Splitter 350 3800 3-way Splitter 350 3800 4-way Splitter 350 3800 Type No. 92210012 92210013 92210014 Connectors 4.3-10 socket (50 Ω) Max. power (at 50 C 300 W ambient temperature) For connecting... antennas 2 3 4 Frequency range 350 3800 MHz VSWR 1.25 (Port 1) 1.25 (Port 1) 1.35 (Port 1) Intermodulation IM3 155 dbc (2 x 20 W) typical: 160 dbc Impedance 50 Ω Insertion loss < 0.05 db Weight 964 g 1045 g 1134 g (without mounting kit) Dimensions (w x h x d) See drawings on following page Mounting: DC capability: Indoor use: No additional mounting material is necessary. Outdoor use: Mounting material is listed below (order separately). DC transmission between all terminations (suitable for remote power supply systems). Environmental conditions: ETS 300 019-1-1 class 1.2 ETS 300 019-1-2 class 2.3 ETS 300 019-1-4 class 4.1 E Low temperature: 30 C High temperature (dry): +65 C IP 65 92210012 92210013 92210014 Mounting material (order separately) Type Description Remarks 92210015 Mounting kit 734365 1 clamp Mast: 45 125 diameter 92210015 734365 76

Low-loss Power Splitters Multi-band 350 3800 92210012 wallmast-mounting kit (Option) BN 92210015 92210013 wallmast-mounting kit (Option) BN 92210015 92210014 wallmast-mounting kit (Option) BN 92210015 Accessories 77

Low-loss Power Splitters Multi-band 380 3800 For indoor and outdoor use. 2-way Splitter 380 3800 Type No. 97121242 Connector (female) 7-16 Max. power 700 W (at 50 C ambient temperature) For connecting... antennas 2 Frequency range 380 3800 MHz VSWR < 1.5 Intermodulation IM3 < 150 dbc (2 x 43 dbm carrier) Impedance 50 Ω Insertion loss < 0.05 db Weight 870 g Packing size 300 x 75 x 75 Material: Mounting: DC capability: Environmental conditions: Brass. Surface treatment: CuSnZn3 Bracket for wall mounting included in the scope of supply. For pipe mast mounting use clamps listed below (order separately). DC transmission between all terminations (suitable for remote power supply systems). ETS 300 019-1-4 class 4.1 E Low temperature: 55 C High temperature (dry): +60 C IP 65 34 14.5 15 7 86010131 SW 24 61 input 35 260 86010130 Clamps (order separately) Type Description Remarks 736801 1 clamp Mast: 34 60 diameter 736802 1 clamp Mast: 60 80 diameter 736803 1 clamp Mast: 80 100 diameter 736804 1 clamp Mast: 100 120 diameter 736805 1 clamp Mast: 120 140 diameter 736805 78

Power Splitters 380 512 For indoor and outdoor use. 3-way Splitter 380 512 4-way Splitter 380 512 Type No. K7431348 K7431358 Connector (female) 7-16 7-16 Max. power 1000 W (at 50 C ambient temperature) For connecting... antennas 3 4 Frequency range 380 512 MHz VSWR < 1.1 Impedance 50 Ω Insertion loss < 0.05 db Max. size () [] 409 x 82 x 82 [16.1 x 3.2 x 3.2] Packing size () [] 425 x 93 x 107 [16.7 x 3.7 x 4.2] Material: Mounting: Case: Aluminum. Inner conductor: Brass. Bracket for wall mounting included in the scope of supply. For mounting to tubular masts use clamps as listed below (order separately). K7431358 Clamps (order separately) Type Description Remarks () [] 734360 2 clamps Mast diameter: 30 55 [1. 2.2] 734361 2 clamps Mast diameter: 55 75 [2.2 2.9] 734362 2 clamps Mast diameter: 75 95 [2.9.7] 734363 2 clamps Mast diameter: 95 115 [3.7 4.5] 734364 2 clamps Mast diameter: 115 35 [4.5 4.3] 734364 Accessories 79

Low-loss Power Splitters Multi-band 694 3800 For indoor and outdoor use. 2-way Splitter 694 3800 3-way Splitter 694 3800 4-way Splitter 694 3800 Type No. 97131128 97131129 97131120 Frequency range MHz 694 3800 For connecting... antennas 2 3 4 Insertion loss db < 0.05 Impedance Ω 50 VSWR 694 2100 MHz 2100 2700 MHz 2700 3800 MHz < 1.3 < 1.3 < 1.5 < 1.3 < 1.4 < 1.5 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. power W 100 (at 50 C ambient temperature) Connector 4.3-10 female Weight Profile cross-section Packing size Max. size kg lb 0.42 0.93 0.45 0.99 25 x 25 1.0 x 1.0 248 x 73 x 86 9.8 x 2.9 x 3.4 237 / 66 / 46 9.3 / 2.6 / 1.8 < 1.3 < 1.3 < 1.6 0.48 1.06 Material: DC capability: Housing: Aluminum. Inner conductor: Brass. DC transmission between all terminations (suitbale for remote power supply systems). Environmental conditions: IP 65 97131120 80

Multi-band Low-loss Power Tapper 380 960 / 1695 2700 / 3400 3800 / 4920 5920 Continuously Adjustable Splitting Ratio 5.0 db 20.0 db For indoor and outdoor use. 2-way Tapper 380 960/1695 2700/3400 3800/4920 5920 Type No. 97131271 P 1 Frequency range MHz 380 960 1695 2700 3400 3800 4920 5920 Power ratio between outputs (P 2 / P 1) db 5 to 20 continuously adjustable For connecting... antennas 2 Insertion loss db 380 960 MHz: < 0.2 1695 2700 MHz: < 0.2 3400 3800 MHz: < 0.5 4920 5920 MHz: < 0.7 Impedance Ω 50 VSWR 380 960 MHz: < 1.5 1695 2700 MHz: < 1.5 3400 3800 MHz: < 1.7 4920 5920 MHz: < 1.7 Intermodulation IM3 dbc 380 960 MHz: < 150 ( 2 x 43 dbm carrier) 1695 2700 MHz: < 150 ( 2 x 43 dbm carrier) 3400 3800 MHz: < 150 ( 2 x 43 dbm carrier) 4920 5920 MHz: not relevant Max. power W 100 (at 50 C ambient temperature) Connector 4.3-10 female Power ratio adjustment mechanism Power ratio scale (P 2 /P 1 ) P 2 Weight kg lb 0.4 0.9 Environmental conditions Indoor, outdoor use Protection class IP 65 Blocking unit Profile diameter Packing size 50 2.0 225 x 80 x 62 8.9 x 5.0 x 2.4 97131271 Max. size (including connectors) 160 / 63 / 52 6.3 / 2.5 / 2.0 Material: Housing: Aluminum. Inner conductor: Brass. DC capability: DC transmission only between input and port P 1. Splitting table (typical values) P 2 / P 1 [db] Splitting ratio P 1 / P 2 Splitting attenuation P 1 / P [db] P 2 / P [db] 5 3.2 1.3 6.3 6 4 1.05 7.05 7 5 0.85 7.85 8 6.3 0.7 8.7 9 8 0.6 9.6 10 10 0.5 10.5 11 12.6 0.4 11.4 12 15.8 0.35 12.35 13 20 0.25 13.25 14 25.1 0.2 14.2 15 31.6 0.15 15.15 16 39.8 0.14 16.14 17 50.1 0.12 17.12 18 63.1 0.11 18.11 19 79.4 0.1 19.1 20 100.0 0.09 20.09 Accessories 81

Dual-Band Combiner 50 470 MHz PMR / TETRA / TETRAPOL 790 2500 MHz CDMA 800 / GSM 900 / GSM 1800 / UMTS / WLAN Designed for co-siting purposes Enables feeder sharing Can be used as a combiner near the BTS or in a reciprocal function near the antenna Suitable for indoor or outdoor applications Wall or mast mounting External DC stop available as an accessory Very low insertion loss High input power Port 1 Port 2 Port 3 Port 3 Port 1 50 470 Port 2 790 2500 Technical Data Type No. 89321571 Pass band Band 1 Band 2 Insertion loss Port 1 Port 3 Port 2 Port 3 Isolation Port 1 Port 2 VSWR Impedance power Band 1 / Band 2 50 470 MHz 790 2500 MHz < 0.15 db (50 470 MHz) < 0.15 db (790 2500 MHz) > 50 db (50 470 / 790 2500 MHz) < 1.25 (50 470 / 790 960 / 1710 2500 MHz) 50 Ω < 500 W / < 500 W Intermodulation products < 160 dbc (3 rd order; with 2 x 20 W) Temperature range 55... +60 C Connectors 7-16 female (long neck) Application Indoor or outdoor (IP 66) DC/AISG transparency Port 1 Port 3 Port 2 Port 3 Mounting Weight Packing size Dimensions (w x h x d) By-pass (max. 2500 ma) Stop Wall mounting: With 4 screws (max. 8 diameter) / Mast mounting: With additional clamp set 4.0 kg 210 x 150 x 440 122 x 64 x 364.3 (including mounting brackets) 82

Dual-Band Combiner 50 470 MHz PMR / TETRA / TETRAPOL 790 2500 MHz CDMA 800 / GSM 900 / GSM 1800 / UMTS / WLAN Attenuation/dB 0 10 20 30 40 50 60 70 80 90 Diagram II Port 1 Port 3 Port 2 Port 3 50 470 806 2500 100 0 250 500 750 1000 1250 1500 1750 2000 2250 2500 Frequency/MHz Attenuation/dB 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Diagram II Port 1 Port 3 Port 2 Port 3 50 470 806 2500 1.0 0 250 500 750 1000 1250 1500 1750 2000 2250 2500 Frequency/MHz Port 1 Port 2 Port 3 Á Accessories (order separately) Type No. Clamp set suitable for mast diameter of 734360 34 60 734361 60 80 734362 80 100 734363 100 120 734364 120 140 734365 45 125 Type No. Description 78210850V01 DC stop 78410367 50-Ohm load Clamp Set DC Stop 50-Ohm load Accessories 83

Low Noise Amplifier GPS 97121253 The low noise amplifier 86010142 is designed for the use inside vehicles with train antennas with GPS. It includes a preselection filter to prevent the inter ference in case of simultaneous operation at the frequency range 380 960 / 1710 3800 MHz and GPS. The product fulfils the requirements according to EN 50155. Block Diagram lowpass bandpass filter GPS amplifier bandpass filter GPS amplifier bandpass filter GPS bias-t TCN female Output N female 53 2.1 Type No. 97121253 Frequency MHz 1575.42, L1-signal Gain db 25 ±2 Noise figure db < 2.0 VSWR (input, output) < 1.8 Operation voltage V 3.3... 5.5, ripple < 50 mv, supplied at inner conductor RF-output Operation current ma 25 Connector input TNC female Connector output N female Dimensions (w x h x l) Mounting 70 x 22 x 50 2.8 x 0.9 x 2.0 4 holes, 4.5 diameter 4 holes, 0.2 diameter 1) 5 0.2 2) 4.4 0.17 3) 7 0.28 70 2.8 (Antenna) TNC 1) 22 0.9 Additional features: The maximum input power at the input of the amplifier at the frequency range 380 960 MHz and 1710 3800 MHz is limited to +25 dbm. The noise level at the GPS-frequency generated by the operation at the frequency range 380 960 MHz and 1710 3800 MHz should not exceed the thermal noise level at the input of the GPS Amplifier, otherwise the noise figure will be increased. 50 2.0 2) 3) 30 1.2 93 3.7 Environmental conditions: Temperature range: 25 C +55 C (data as specified) 40 C +85 C (extended range) *) Please note: It is necessary to use four fixing screws to mount the LNA in case the installation height is more than 2 m. The system operator (receiver) needs to secure a current limit of < 1000 ma. EU-RED: Hereby, KATHREIN SE declares that the radio equipment type 86010142 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.kathrein.com *) Extended range of operation: Within an extended temperature range of 40 C +85 C and an extended supplied voltage range of 3.0 V 6.0 V operation is possible with the following restrictions: Noise figure: < 2.5 db Gain: > 20 db N Output (DC +3.3... 5.5 V) bottom top ceiling Hanging installation position All dimensions in 84

Product Line of Mounting Parts Type Windload Classification Pole Diameter in Type No. Remark Clamp light / medium 28 60 731651 light / medium / heavy 42 115 738546 light / medium / heavy 110 220 85010002 210 380 85010003 Clamp XM (X-medium) 55 115 85010111 XH (X-heavy) 55 115 85010096 Downtilt kit XH (X-heavy) 110 220 85010097 XH (X-heavy) 210 380 85010101 light 732327 light / medium 737978 heavy 85010008 Downtilt kit XM (X-medium) 85010110 XH (X-heavy) 85010099 Azimuth Adjustment Kit light / medium heavy 85010014 85010015 Pole mounting adjustment angle ±30 (additional clamp needed) Azimuth Adjustment Kit light / medium 85010016 Wall mounting adjustment angle ±30 Azimuth Adjustment Kit X-heavy 85010098 3 Sector Clamp 88.9 742263 88.9 742317 light / medium 114.3 742033 3 sector clamp 139.7 742034 114.3 85010058 heavy 139.7 85010059 X-heavy 114.3 85010102 Offset light / medium Mounting support clamp 85010060 Clearance between heavy 85010061 pole and antenna (additional clamp X-heavy 85010104 needed) 2x Panel Mounting Kit Tension Band max. Panel width 160 742113 light / medium 85010075 max. Panel width 325 heavy 85010076 X-heavy light 110 220 max. Panel 85010103 210 380 width 378 85010108 34 60 734360 60 80 734361 80 100 734362 100 120 734363 120 140 734364 45 125 734365 G F New or changed product Additional clamp needed Please note: Only usable without downtilt kit Accessories 85

Side-mounting Clamp Omnidirectional Antennas Large Pipe Type No. 738908 For masts of 94 125 diameter Antenna Mast b a b a 86

db db db Side-mounting Bracket Omnidirectional Antennas Type No. 737398 Side-mounted bracket (for mast diameters of 40 105 ) D Type No. 737398 Fits for antenna type no. 800/900 MHz 736347 738192 A Side-mounting is possible for four fixed distances between the tubular mast and the antenna: 800/900 MHz (holes 1 and 3) UMTS (hole 2) A = 100 = 0.3 λ A = 160 = 0.5 λ A = 240 = 0.75 λ A = 80 = 0.5 λ A A A A Bracket Antenna Antenna base Mast Bracket Hole 3 Hole 1 Hole 3 Hole 2 D D D D Pipe D Horizonal Radiation Pattern Spacing A Curve Pipe D Horizonal Radiation Pattern Spacing A Curve Pipe D Curve Horizonal Radiation Pattern Spacing A 100 100 40 40 direction from mast to antenna 3 0 160 240 100 direction from mast to antenna 3 0 160 240 100 direction from mast to antenna 3 0 80 Accessories 87

Kathrein s Remote Electrical Tilt System Functionality of Different RET Technologies RCU with RFID Feature External RCU 86010148V01 includes a RFID reader Antenna spindles are equipped with RFID tags The antenna specific data is stored on this tag: a Type number a Serial number a Configuration File With power on, the data is read out automatically from the tag by the RCU List of all updated antennas on our homepage: www.kathrein.com/rfidspindle FlexRET Integrated RET module inside the antenna (86010153V01) Pre-configured with the antenna specific parameters: a Type number a Serial number a Configuration file Calibrated ex-factory The FlexRET module is exchangeable a Automatic data transfer in case of exchange with internal RFID tag a Only calibration is neccessary Daisy chain possibility with FlexRET antennas and / or external RCUs Same module for all antennas SingleRET or MultiRET selection possible Array allocation possible with special Site Sharing Adapter or Gender Adapter / Port Extender Site Sharing Adapter Needed whenever the AISG control of a FlexRET antenna shall be performed by a higher number of base stations (BTS) 2 different realizations available a 3-way Site Sharing Adapter: Type no. 86010154 FlexRET control with up to 3 BTS a 6-way Site Sharing Adapter: Type no. 86010155 FlexRET control with up to 6 BTS Daisy chaining of up to 3 FlexRET antennas Additional ALDs can be mounted prior to the Site Sharing Adapter Flexible allocation of antenna arrays to the different BTS units using a special software application via PC Each BTS can act independently Individual password protection of configuration possible Configuration can be sent to the Site Sharing Adapter with every AISG control device (BTS or e.g. Kathrein ALC) BTS or Operator A 86010154 BTS or Operator B 3 x AISG in 1 x FlexRET out BTS or Operator C 88

MOBILE COMMUNICATION Kathrein s Remote Electrical Tilt System Functionality of Different RET Technologies Gender Adapter (86010162) Can be used if 2 base stations (BTS) are interconnected to one coon FlexRET antenna Mounted on the FlexRET output of the module Converts the AISG output to an AISG input The allocation of the antenna arrays can easily be performed during the coissioning process via the BTS Port Extender (86010163) Can be used if 2 BTS are interconnected to coon FlexRET antennas in daisy chain Mounted on the FlexRET module by 2 screws Converts 1 FlexRET input and output to 2 FlexRET inputs and outputs Daisy chaining with further FlexRET antennas and / or external RCUs The allocation of the antenna arrays can easily be performed during the coissioning process via the BTS Manuals for all our AISG control devices and for the Site Sharing Adapter as well as the corresponding software downloads can be found on our homepage in the section Technical Documents respectively Driver and Software. For details of the RET system please also see Kathrein s RET brochure. Remote Electrical Tilt System Overview of Products, Installation, Control Possibilities and FAQs Kathrein s overall RET system works in accordance with the AISG (Antenna Interface Standards Group) standard and 3GPP (3rd Generation Part ner ship Project). 89 Accessories