Power Transducer Series MUTI POWER TRASDUCER Functions & Features Measures simutaneousy severa variabes of a heavycurrent power system: current, votage, active, reactive and apparent power, active and reactive energy, power factor, frequency, etc Parameters are programmabe using the front eys or the PC Dispayed measurands are freey seectabe oop test output 10-point anaog and 2-point energy puse output Typica Appications Muti-functiona power measurement in eectric device or in switching boards 125 (492) 116 (457) 140 (551) mm (inch) MODE: SMT4 [1][2][3]1 [4][5] ORDERIG IFORMATIO Code number: SMT4-[1][2][3]1-[4][5] Specify a code from beow for each [1] through [5] (eg SMT4-12A1-AD4/Q) Specify the specification for option code /Q (eg /C01) on-specified orders wi be shipped at defaut factory settings (o ESU-1957) However, the power suffix code must be specified Measured variabes can be reconfigured with front pane or PC configurator software [1] COFIGURATIO 1: Singe phase / 2-wire and 3-wire, 3-wire 2: Singe phase / 2-wire and 3-wire, 3-wire and 4-wire [2] IPUT 1: 480 V / 1 A AC 2: 480 V / 5 A AC [3] OUTPUT Current A: 4 20 ma DC Votage 4: 0 10 V DC 5: 0 5 V DC 6: 1 5 V DC DISCRETE OUTPUT 1: Do 2-point [4] AUXIIARY POWER SUPPY AD4: universa 100 240 V AC (Operationa range 85 264 V, 50 / 60 Hz) / 110 240 V DC (Operationa range 99 264 V, rippe 10 %p-p max) DC Power R: 24 V DC (Operationa votage range 24 V ±10 %, rippe 10 %p-p max) V: 48 V DC (Operationa votage range 48 V ± 10 %, rippe 10 % p-p max) [5] OPTIOS ban: none /Q: With options (specify the specification) SPECIFICATIOS OF OPTIO: Q COATIG (For the detai, refer to M-System's web site) /C01: Siicone coating /C02: Poyurethane coating /C03: Rubber coating REATED PRODUCTS PC configurator software (mode: SCFG) Downabe at M-System s web site A dedicated cabe is required to connect the modue to the PC Pease refer to the internet software down site or the users manua for the PC configurator for appicabe cabe types GEERA SPECIFICATIOS Construction: Stand-aone; termina access at the front Degree of protection: IP 20 (Termina boc, housing) Connection Votage input: M4 screw terminas (torque 14 m) SMT4 SPECIFICATIOS ES-1957 Rev4 Page 1/5
Current input: M4 screw terminas (torque 14 m) Output: M35 screw terminas (torque 06 m) Power: M4 screw terminas (torque 14 m) Configuration Code 1: Singe phase/2-wire and 3-wire, 3-phase/3- wire baanced/unbaanced Code 2: Singe phase/2-wire and 3-wire, 3-phase/3- wire baanced/unbaanced, 3-phase/4- wire baanced/unbaanced Screw termina: ice-pated stee Housing materia: Fame-resistant resin (bac) Isoation: Votage input to current input to output signa to discrete output 1 to discrete output 2 to auxiiary power suppy to FE Measured variabes Votage: 1, 2, 3, 1 2, 2 3, 3 1 Current: 1, 2, 3, Active / reactive / apparent power: 1, 2, 3, Σ Power factor: 1, 2, 3, Σ Frequency Active energy Reactive energy DISPAY: Red ED; for setting and monitoring; signed 5 digits IPUT SPECIFICATIOS Frequency: 50 / 60 Hz (45 65 Hz) Votage Input Rated votage ine-to-ine (deta votage): 480 V ine-neutra (phase votage): 277 V (singe phase / 2-wire and 3-wire) Consumption VA: U 2 / 300 Ω / phase Over capacity: 200 % of rating for 10 sec, 120 % continuous Seectabe primary votage range: 50 400 000 V Current Input Rated current: 1 A or 5 A Consumption VA: I 2 001 Ω / phase Over capacity: 4000 % of rating for 1 sec, 2000 % for 4 sec, 120 % continuous Seectabe primary current range: 1 20 000 A Seectabe primary power range: 2 G VA Operationa range Votage, current, apparent power: 120 % of the rating Active / reactive power: -120 to +120 % of the rating Frequency: 45 65 Hz Power factor: -1 to +1 OUTPUT SPECIFICATIOS DC Output oad resistance (output range) 4-20 ma DC: 600 Ω 0-10 V DC: 5Ω 0-5 V DC: 1Ω 1-5 V DC: 1Ω Open Coector Energy count output Max rated : 130 V DC @ 50 ma Continuous rated : 130 V DC @ 30 ma Saturation votage: 15 V DC When driving an inductive, externa contact protection and noise quenching recommended ISTAATIO Auxiiary Power AC: < 20 VA DC: < 9 W Operating temperature: -10 to +55 C (14 to 131 F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DI rai Weight: 700 g (15 b) PERFORMACE in percentage of rating Accuracy (at 23 C ±10 C or 734 F ±18 F, 45 65 Hz) Votage: ±05 % Percentage of 100 V at 1 V to < 100 V Percentage of input votage at 100 V Current: ±05 % Power: ±05 % Percentage of the span of wattage as isted beow at < 100 V: 1732 W (1 A) or 866 W (5 A) for 3 ph/3 w 100 W (1 A) or 500 W (5 A) for 1 ph/2 w 200 W (1 A) or 1000 W (5 A) for 1 ph/3 w 300 W (1 A) or 1500 W (5 A) for 3 ph/4 w Percentage of the span of power based on input votage and rated current (1 A or 5 A) at 100 V PF: ±05 % Frequency: ±05 % Energy: ±1 % (oad current 5-120 % PF 1; current 10-120 % PF 05) Response time: 1 sec (0 99 %) Insuation resistance: 100 MΩ with 500 V DC Dieectric strength: 2000 V AC @ 1 minute (Votage input to current input to output signa to discrete output 1 to discrete output 2 to auxiiary power to FE) SMT4 SPECIFICATIOS ES-1957 Rev4 Page 2/5
STADARDS & APPROVAS EU conformity: EMC Directive EMI E 61000-6-4 EMS E 61000-6-2 ow Votage Directive E 61010-1 Measurement Category II (input) Instaation Category II (auxiiary power) Poution Degree 2 Input to output: Reinforced insuation (480 V) Output to auxiiary power: Reinforced insuation (300 V) RoHS Directive E 50581 EXTERA VIEW Output Terminas DATA Dispay Configuration Jac Power Input Terminas Contro Buttons Input Terminas SMT4 SPECIFICATIOS ES-1957 Rev4 Page 3/5
TERMIA COECTIOS ote: In order to improve EMC performance, bond the FE termina to ground Caution: FE termina is OT a protective conductor termina TERMIA ASSIGMET EECTRICA COECTIO Output Terminas Power Input Terminas Input Terminas CH1+ CH1 CH10+ CH10 CH11+ CH11 CH12+ CH12 U(+) V( ) FE JAC AAOG OUTPUT 1 AAOG OUTPUT 10 COTACT OUTPUT 1 COTACT OUTPUT 2 POWER COFIGURATOR System / Appication Termina P1 P2 P3 1S 1 3S 3 P1 P2 P3 1S 1 3S 3 3-wire, unbaanced P1 P2 P3 1S 1 3S 3 System / Appication Termina U V V U P1 1S 1 P1 1S 1 P1 1S 1 P1 1S 1 Singe phase / 2-wire P1 1S 1 4-wire, baanced P1 1S 1 u v u v U V U V P1 P2 P3 1S 1 P1 P2 P3 1S 1 3-wire, baanced P1 P2 P3 1S 1 P1 P2 P3 1S 1 2S 2 3S 3 Singe phase / 3-wire U V V U P1 P3 1S 1 3S 3 P1 P3 1S 1 3S 3 U V V U P1 P3 1S 1 3S 3 4-wire, unbaanced P1 P2 P3 1S 1 2S 2 3S 3 P1 P2 P3 1S 1 2S 2 3S 3 u v u v u v U V U V U V SMT4 SPECIFICATIOS ES-1957 Rev4 Page 4/5
DIMESIOS unit: mm (inch) 72 (28) 24 M35 TERMIA SCREW 4 45 (17) DIA MTG HOE TERMIA COVER 140 (552) 126 (496) 115 (453) 119 (469) (DI rai mounting) DI RAI 35mm wide 75 (295) 125 (492) 116 (457) 65 (26) [33 (13)] 86 (34) 13 M4 TERMIA SCREW Specifications are subject to change without notice SMT4 SPECIFICATIOS ES-1957 Rev4 Page 5/5