mod# modification detail list price

MODIFICATION LIST mod# modification detail list price 1. MOD#1 Standard OFS Hardware Pulls $25 Each 3. MOD#3 Move or Add Grommets (customer to specify location) $63 Each 4. MOD#4 Reinforced Drawers - factory installed metal support bars. (Available on lateral files and on 16"D file drawers) Applicable on filing in most casegoods 24"D or under. Contact Customer Service or Specials Costing for applicability on other items. 5. MOD#5 Fabric Tackboards (any size reduction or an increase in height up to 6") $50 Per $30 Drawer 6. MOD#6 Contemporary - BBF to FF No Upcharge 7. MOD#7 Contemporary - FF to BBF No Upcharge 8. MOD#8 Wire Access Cutout in Back Panel (4" x 4") - Available on Bridges, Returns, Credenzas, & Corner Units. Cannot be located closer than 3" from any edge. For units with Signature Band, top clearance is 6". (customer to specify location) 9. MOD#9 Wire Access Cutout in Back Panel (12" x 12") - Available on Bridges, Returns, Credenzas, & Corner Units. Cannot be located closer than 3" from any edge. For units with Signature Band, top clearance is 6". (customer to specify location) No Upcharge No Upcharge 10. MOD#10 Locking (non-electronic) for wood or laminate doors only. Per individual storage section (no vertical divider).$150 13. MOD#13 Venting Slots (customer to specify location) $75 17. MOD#17 Wire Access Door in Back Panel (18" x 15") Left Hinge - Available on Bridges, Returns, Credenzas, & Corner Units. Top clearance is 3". (customer to specify location) $445 Each 18. MOD#18 Set of 4 Casters - Available on some Pedestals $55 22. MOD#22 Casegood Units Cutdown TFL, HPL and Width Only (cannot affect drawer size, glass or metal items) 15% Upcharge 23. MOD#23 Increase Worksurface or Top Depth from 48"D 59.5"D TFL, HPL and Only Excludes 3D Laminate Tops (Note: larger tops may require proportionately larger bases and support) 35% Upcharge Liability Clause: This pricing structure represents the more commonly requested product modifications. Although these modifications can be applied to the vast majority of products listed in our price books, some modifications cannot be applied to products with non-standard design features. Please contact your Customer Service Representative if you require assistance. How to Order: Example Qty MOD# Model Number Modification Detail Options Price 1 MOD#3 BK-60RD29V add grommet $2,096 + $63 = $2,159 O

VENEER Exposed surfaces are number one select cherry, walnut, maple or oak veneers. Select straight and close grain patterns are used overall to maintain consistency between individual units. WORKSURFACES Conference table tops are 1.1875" thick, supported with a 1" thick high-density subtop for a total thickness of 2.1875", profiled on all sides. Multi-piece tops are joined together with metal plates and wood screws. Credenza tops are 0.75" thick, profiled on user side only. BASES Bases attach to tops with support panels and wood screws. Only two bases are required for any table length due to support beams that run the entire length between bases. Support beams consist of composite wood material reinforced with steel, veneered and finished. Support beams ship with conference top. An optional center wire management column is offered for channeling wires from worksurface to floor in the center of the table. ACCENTS Some Launch products are designed with 1.5" diameter half-tubular aluminum accents that coordinate with the overall design of the product. s, caesarstone, silestone, solid surface and leather material options are available on worksurface ends and center inserts of conference tops. s, caesarstone, silestone and solid surface material options are also available on credenza tops, hospitality cart undershelf, open display case top and lectern shelf. WORK AREA Launch table design incorporates 27.1875" linear inches of work area per person for more comfortable conferencing. Seating capacity listed in item description is based on 27.1875". Tables can accommodate additional seating. ASSEMBLY Structural joints are secured with 16-gauge steel angle brackets and wood glue blocks. Tables include mounting brackets for electrical/data boxes. Failure to secure the electrical/data boxes to the table top will void warranty. Please see instruction manual on installation of conference tops. Adjustable levelers feature insert nuts to prevent glide tear out. CASEGOODS BACK PANELS Casegoods are intended for placement against a wall. Backs of credenzas and storage cabinets are unfinished and are inset 2" to allow for wire management. FILE DRAWERS All file drawers accommodate letter or legal filing. Filing hardware is finished in black to prevent corrosion. DRAWER CONSTRUCTION 0.4375" thick unidirectional plywood drawer sides and backs are assembled using rigid dowel construction. Drawers feature 0.25" thick drawer bottoms. Drawer interiors are sanded and finished. DRAWER SUSPENSION High quality drawer suspensions carry a lifetime warranty. Box and file drawers are full extension. All suspension systems have a durable finish and feature positive and cushioned in/out stops and steel ball bearings to ensure a smooth ride. FINISH The patented Euroluxe finish is a chemically re-engineered Urethane clear coat that preserves the beautiful depth and clarity of OFS' finishes, but allows for much greater performance with chemical and scratch resistance, as well as the complete elimination of dangerous formaldehyde emissions. The Euroluxe finish system achieves indoor air quality standards set by LEED and BIFMA furniture emission standards and allows all products to achieve SCS Global Services' Indoor Advantage Gold Certification. 523

WOOD FINISHES Cherry Sienna () MMC Mocha () QEC Molasses () Walnut BUW Burnished () DST Desert () EBY Ebony () MGW Toffee () MNW Root () Port () Maple Blonde () Honey () Oak Linen () Oslo () Pecan () Steel () Studio s (10% Upcharge) SVC Silver Grey () C2Q Arabica () C2P Wheat () OPTIONAL MATERIALS Conference Table Worksurfaces Ends or Center Inserts Hospitality Cart Undershelf Lectern Shelf Credenza Tops Open Display Case Top Caesarstone BZC Blizzard HZC Haze JBC Jet Black Silestone LRC Lyra Note: Caesarstone and Silestone are a natural product. Color and pattern may vary by item. These are not defects and products cannot be replaced because of these natural variations. Solid Surface CWS Cameo White CSS Concrete DMS Deep Mink MWS Modern White Green Hide Sierra Leather - Only See Green Hide Sierra at ofs.comfor color selections. Electrical/Data with Matching Wood Insert - Squircle Tables Only EDB Electrical/Data Boxes with Wood Center Insert to match Conference Top 524

PRODUCT FEATURES CONFERENCE TABLES LA-18956CT4 shown - see pages 533-541 for boat-shaped conference table selections. For squircle tables, see pages 543-545. Double Electrical/Data Box Available as an option on CT1 and CT2. Standard on CT3 and CT4. Optional Center Inserts in wood, granite, solid surface, or leather available on CT3 and CT4. Table top strip lighting available on CT4 only. LED lights. Switch is located in end electrical/data box. Access Door for electrical/data infeed LA-CTB Base covers 6"W x 6"D 4-outlets floor plate Steel-reinforced support beams run the entire length of the top between bases (only 2 bases required). exterior of support beam is finished to match conference top finish. 1.5" Diameter Half-Tubular Aluminum Accent Optional Worksurface Ends in wood, granite, solid surface or leather insert available on CT2, CT3 and CT4. LA-CTBC - optional center wire management column conceals wires routed from center of table to floor. Features access door for electrical/data infeed. Styles available to match base selection. Optional Leather Insert End CT1 CT2 CT3 CT4 WOOD with optional electrical/data boxes WOOD with END and optional electrical/data boxes WOOD with END and CENTER electrical/data boxes standard WOOD with END and CENTER electrical/data boxes and strip lighting standard When specifying wood finishes on CT2 ends or CT3 ends and center, the wood finish specified must be different from the tabletop finish. For tables with the same finish, order CT1 tabletop. 525

PRODUCT FEATURES CONFERENCE TABLES Underside cutaway view of CT4 to show wiring Subtop provides structural support and serves as mounting platform for multi-piece conference tops. Power for Lights Transformer Power Access for Lights Power to Electrical/Data Boxes Steel Structural Supports Support beams conceal wiring from electrical/data boxes and lights Powered conference tables with lighted worksurfaces have 2 power cords. Any Leviton modules and most NEMA approved modules can be field installed to meet your needs. Contact your local AV contractor for your specific requirements. For optional or standard electrical/data boxes, the supplied power includes 7' power cord with standard plug, handy box and daisy chain connectors. A qualified electrician can easily convert the plug to hard wire in the field to meet City of Chicago requirements. No additional parts are needed. Wiring and connectors for power are included in the price of the top when electrical/data boxes are specified. All electrical components, including the electrical/data boxes, ship in a separate carton. Installation sheets provide specific instructions on how to route power. Placement of the electrical/data boxes is standard as shown in the line art on pages 533-545. To modify the number of boxes and/or location, see pages 526-529. 2 ELECTRIC OUTLETS, 2 RJ-45 CONNECTORS AND 4 BLANKS PER SIDE FOR CT4 LIGHTED CONFERENCE TOP, LIGHT SWITCH REPLACES 1 DATA FACEPLATE IN END BOX DOUBLE ELECTRICAL/DATA BOX FOR BOAT-SHAPED CONFERENCE TOPS 2 ELECTRIC OUTLETS, 2 RJ-45 CONNECTORS AND 4 BLANKS SINGLE ELECTRICAL/DATA BOX FOR SQUIRCLE CONFERENCE TOPS 526

ELECTRICAL/DATA KITS FOR CT1 AND CT2 CONFERENCE TOPS Electrical/data boxes are preconfigured as shown in the drawings on pages 533-536. However, CT1 and CT2 conference tops can be ordered as a special, with electrical/ data boxes inserted at any specified location. NOTE: Due to the insert options and lighted surfaces, the CT3 and CT4 conference tops cannot be modified. A detailed drawing must accompany your purchase order. Some constraints/restrictions may apply. Please contact Customer Service for additional information or email specials_costing@ofsbrands.com for a quote. Electrical/data kits include electrical/data boxes, handy box with 2 power cords and daisy chain connectors to connect the power from handy box to the first electrical/ data box and between the electrical/data boxes at 27.1875" intervals. A qualified electrician can easily convert the plugs to hard wire in the field to meet City of Chicago requirements. No additional parts are needed for hardwiring. Please make note that one electrical/data box or the first box in a daisy chain must be placed a minimum of 22.8125" from the end. Boxes placed exactly 22.8125" from the end allow wires to be routed directly through the base to the power outlet in the floor for optimum wire management (see illustration at right). Kits are configured based on a distance of 27.1875" between boxes. If boxes are placed more than 3' apart or if the first box is located further than 22.8125" from the end, additional LA-PW daisy chain connectors will be needed. Each LA-PW daisy chain connector extension is 3' L. In cases where the number of daisy chain connectors required is not compliant with local code, wiring can be routed between the electrical/data boxes. OFS will work with your own AV contractor to develop wiring solutions that are in compliance. Electrical location Please contact your Customer Service Rep or email special_costing@ofsbrands.com for orders requiring the use of electrical/data kits. A detailed drawing must accompany the purchase order. Cutout is 22.8125" from end NOTE: Electric codes may vary from location to location. Customer is responsible for ensuring compliance with local electrical codes. INDIVIDUAL COMPONENT PRICING unit single box w/ 10' cord double box w/ 10' cord plug & play 10' patch cord 3' daisy chain each LA-PDS $ 1,632 LIST LA-PBD $ 2,044 LIST LA-PC $ 255 LIST LA-PW $ 330 LIST DOUBLE BOX DAISY CHAIN KITS unit double box kits 2 boxes in kit LA-PDK2D $ 5,091 LIST 3 boxes in kit LA-PDK3D $7,635 LIST 4 boxes in kit LA-PDK4D $ 10,196 LIST 5 boxes in kit LA-PDK5D $ 12,399 LIST 6 boxes in kit LA-PDK6D $ 14,936 LIST 7 boxes in kit LA-PDK7D $ 17,300 LIST 8 boxes in kit LA-PDK8D $ 19,804 LIST Prices include conference top modification. Order 1 LA-PC plug and play 10' patch cord for each RJ-45 connection part. Each kit includes 1 daisy chain connector between handy box and the first electrical/data box and 1 daisy chain connector between each pair of electrical/data boxes. Order additional LA-PW daisy chain connectors when boxes are placed over 3' apart. 527

ELECTRICAL/DATA KIT POSITIONS FOR CT1 AND CT2 CONFERENCE TOPS LA-10850CT1 and LA-10850CT2 108" 50" NQ option - electrical/data box 3 daisy chains LA-PDK2D & 1 LA-PW LA-PBD LA-13552CT1 and LA-13552CT2 135" 52" NQ option - electrical/data box LA-PDK3D & 2 LA-PW LA-PDK2D & 2 LA-PW LA-PDK2D & 1 LA-PW LA-PBD 4 daisy chains LA-16254CT1 and LA-16254CT2 162" 54" NQ option - electrical/data box 5 daisy chains LA-PDK4D & 1 LA-PW LA-PDK3D & 2 LA-PW LA-PDK2D & 3 LA-PW LA-PDK2D & 2 LA-PW LA-PBD LA-18956CT1 and LA-18956CT2 189" 56" NQ option - electrical/data box 6 daisy chains LA-PDK4D & 2 LA-PW LA-PDK4D & 2 LA-PW LA-PDK3D & 2 LA-PW LA-PDK2D & 3 LA-PW LA-PDK2D & 3 LA-PW LA-PDK2D & 2 LA-PW LA-PBD 528

ELECTRICAL/DATA KIT POSITIONS FOR CT1 AND CT2 CONFERENCE TOPS LA-21658CT1 and LA-21658CT2 216" 58" NQ option - electrical/data box LA-PDK5D & 2 LA-PW LA-PDK4D & 3 LA-PW LA-PDK3D & 3 LA-PW 7 daisy chains LA-PDK3D & 4 LA-PW LA-PDK3D & 2 LA-PW LA-PDK2D & 4 LA-PW LA-PDK2D & 4 LA-PW LA-PDK2D & 3 LA-PW LA-PBD LA-24358CT1 and LA-24358CT2 243" 58" NQ option - electrical/data box LA-PDK4D & 3 LA-PW LA-PDK4D & 4 LA-PW 8 daisy chains LA-PDK4D & 4 LA-PW LA-PDK4D & 3 LA-PW LA-PDK4D & 2 LA-PW LA-PDK3D & 4 LA-PW LA-PDK3D & 3 LA-PW LA-PDK2D & 3 LA-PW LA-PDK2D & 3 LA-PW LA-PDK2D & 5 LA-PW LA-PDK2D & 4 LA-PW LA-PBD 529

530

531

532

BOAT-SHAPED CONFERENCE TOP STANDARD FEATURES Grain Runs End-To-End Two Bases Required Includes Support Beam used between Bases Edge Shape NOTES: Item Weights are based on Wood Tops. Weights will increase by Weight of Options specified (see page 582). See page 541 for Coordinating Bases and Wire Management Columns. See pages 580-581 for Optional Electrical/Data Inserts. Optional Electrical/Data Boxes - Includes 7' Power Cord with Standard Plug, Handy Box and Daisy Chain Connectors. Each Box contains Two Electric Outlets, Two RJ-45 Universal Voice/Data Modules and Four Blanks per Side - Electric Components ship in a Separate Carton. Installation Instructions are included. LA-10850CT1 - Three Optional Electrical/Data Boxes LA-13552CT1 - Four Optional Electrical/Data Boxes LA-16254CT1 - Five Optional Electrical/Data Boxes 50"D X 108"W NP LA-10850CT1 108 50 2.19 318 42 $ 8,156 Seats Six NQ 52"D X 135"W NP LA-13552CT1 135.19 52 2.19 438 54 $ 10,193 Seats Eight NQ 54"D X 162"W LA-16254CT1 162.38 54 2.19 592 66 $ 12,253 Seats 10 NP NQ QEC DST MMC MGW MNW BUW EBY Electrical/Data Boxes NP No Electrical/Data Boxes - Standard NQ Electrical/Data Boxes LA-10850CT1 $7,349 LA-13552CT1 $9,814 LA-16254CT1 $11,924 SPECIFY: electrical/data boxes. See page H for the designator finish name. LA-10850CT1 Electrical/Data Boxes NP 533

BOAT-SHAPED CONFERENCE TOP STANDARD FEATURES Grain Runs End-To-End Two Bases Required Includes Support Beam used between Bases Edge Shape NOTES: Item Weights are based on Wood Tops. Weights will increase by Weight of Options specified (see page 582). See page 541 for Coordinating Bases and Wire Management Columns. See pages 580-581 for Optional Electrical/Data Inserts. Optional Electrical/Data Boxes - Includes 7' Power Cord with Standard Plug, Handy Box and Daisy Chain Connectors. Each Box contains Two Electric Outlets, Two RJ-45 Universal Voice/Data Modules and Four Blanks per Side - Electric Components ship in a Separate Carton. Installation Instructions are included. LA-18956CT1 - Six Optional Electrical/Data Boxes LA-21658CT1 - Seven Optional Electrical/Data Boxes LA-24358CT1 - Eight Optional Electrical/Data Boxes 56"D X 189"W LA-18956CT1 189 56 2.19 704 78 $ 14,583 Seats 12 NP NQ 58"D X 216"W LA-21658CT1 216.19 58 2.19 814 90 $ 16,911 Seats 14 NP NQ 58"D X 243"W LA-24358CT1 243.38 58 2.19 925 102 $ 19,407 Seats 16 NP NQ BUW MMC EBY Electrical/Data Boxes NP No Electrical/Data Boxes - Standard NQ Electrical/Data Boxes LA-18956CT1 $14,366 LA-21658CT1 $16,637 LA-24358CT1 $19,046 SPECIFY: electrical/data boxes. See page H for the designator finish name. LA-18956CT1 Electrical/Data Boxes NP 534

BOAT-SHAPED CONFERENCE TOP WITH END OPTION STANDARD FEATURES Grain Runs End-To-End Two Bases Required Includes Support Beam used between Bases Must specify Wood, Caesarstone, Silestone, Solid Surface or Leather Insert on Worksurface Ends Edge Shape NOTES: If Worksurface End Options are the same as the Table Top, order CT1 Table Top. Wood Ends on CT2 Table Tops are for the option of specifying a different Wood or Material than the rest of the Table Top. Item Weights are based on Wood Tops. Weights will increase by Weight of Options specified (see page 582). See page 541 for Coordinating Bases and Wire Management Columns. See pages 580-581 for Optional Electrical/Data Inserts. Optional Electrical/Data Boxes - Includes 7' Power Cord with Standard Plug, Handy Box and Daisy Chain Connectors. Each Box contains Two Electric Outlets, Two RJ-45 Universal Voice/Data Modules and Four Blanks per Side - Electric Components ship in a Separate Carton. Installation Instructions are included. LA-10850CT2 - Three Optional Electrical/Data Boxes LA-13552CT2 - Four Optional Electrical/Data Boxes LA-16254CT2 - Five Optional Electrical/Data Boxes 50"D X 108"W NP LA-10850CT2 108 50 2.19 318 42 $ 9,161 Seats Six NQ 52"D X 135"W NP LA-13552CT2 135.19 52 2.19 438 54 $ 11,522 Seats Eight NQ 54"D X 162"W LA-16254CT2 162.38 54 2.19 592 66 $ 13,584 Seats 10 NP NQ Worksurface End Electrical/Data Boxes BUW MMC EBY Wood (specify finish) - Standard Caesarstone $8,377 BZC HZC JBC Silestone $8,377 LRC Solid Surface $5,226 CWS CSS DMS MWS Leather Insert $3,602 See Green Hide Sierra at ofs.com for color selection. NP No Electrical/Data Boxes - Standard NQ Electrical/Data Boxes LA-10850CT2 $7,349 LA-13552CT2 $9,814 LA-16254CT2 $11,924 SPECIFY: worksurface end electrical/data boxes. See page H for the designator finish name. LA-10850CT2 Worksurface End Electrical/Data Boxes KWG NP 535

BOAT-SHAPED CONFERENCE TOP WITH END OPTION STANDARD FEATURES Grain Runs End-To-End Two Bases Required Includes Support Beam used between Bases Must specify Wood, Caesarstone, Silestone, Solid Surface or Leather Insert on Worksurface Ends Edge Shape NOTES: If Worksurface End Options are the same as the Table Top, order CT1 Table Top. Wood Ends on CT2 Table Tops are for the option of specifying a different Wood or Material than the rest of the Table Top. Item Weights are based on Wood Tops. Weights will increase by Weight of Options specified (see page 582). See page 541 for Coordinating Bases and Wire Management Columns. See pages 580-581 for Optional Electrical/Data Inserts. Optional Electrical/Data Boxes - Includes 7' Power Cord with Standard Plug, Handy Box and Daisy Chain Connectors. Each Box contains Two Electric Outlets, Two RJ-45 Universal Voice/Data Modules and Four Blanks per side - Electric Components ship in a Separate Carton. Installation Instructions are included. LA-18956CT2 - Six Optional Electrical/Data Boxes LA-21658CT2 - Seven Optional Electrical/Data Boxes LA-24358CT2 - Eight Optional Electrical/Data Boxes 56"D X 189"W LA-18956CT2 189 56 2.19 704 78 $ 15,910 Seats 12 NP NQ 58"D X 216"W LA-21658CT2 216.19 58 2.19 814 90 $ 18,239 Seats 14 NP NQ 58"D X 243"W LA-24358CT2 243.38 58 2.19 925 102 $ 20,736 Seats 16 NP NQ Worksurface End Electrical/Data Boxes BUW MMC EBY Wood (specify finish) - Standard Caesarstone $8,377 BZC HZC JBC Silestone $8,377 LRC Solid Surface $5,226 CWS CSS DMS MWS Leather Insert $3,602 See Green Hide Sierra at ofs.com for color selection. NP No Electrical/Data Boxes - Standard NQ Electrical/Data Boxes LA-18956CT2 $14,366 LA-21658CT2 $16,637 LA-24358CT2 $19,046 SPECIFY: worksurface end electrical/data boxes. See page H for the designator finish name. LA-18956CT2 Worksurface End Electrical/Data Boxes KWG NP 536

BOAT-SHAPED CONFERENCE TOP WITH END AND CENTER INSERT STANDARD FEATURES Grain Runs End-To-End Two Bases Required Includes Support Beam used between Bases Must specify Wood, Caesarstone, Silestone, Solid Surface or Leather Insert on Worksurface Ends and Center Inserts Edge Shape NOTES: Wood Ends and Center Inserts on CT3 Table Tops are for the option of specifying a different Wood or Material than the rest of the Table Top. If both Worksurface End and Center Insert Options are the same as the Table Top, order CT1 Table Top with Optional Electrical/Data Boxes. If Worksurface End Options are different but Center Insert Options are the same as the Table Top, order CT2 Table Top with Optional Electrical/ Data Boxes. Item Weights are based on Wood Tops. Weights will increase by Weight of Options specified (see page 582). See page 541 for Coordinating Bases and Wire Management Columns. See pages 580-581 for Optional Electrical/Data Inserts. Electrical/Data Boxes - Includes 7' Power Cord with Standard Plug, Handy Box and Daisy Chain Connectors. Each Box contains Two Electric Outlets, Two RJ-45 Universal Voice/Data Modules and Four Blanks per Side - Electric Components ship in a Separate Carton. Installation Instructions are included. LA-10850CT3 - Three Electrical/Data Boxes LA-13552CT3 - Four Electrical/Data Boxes LA-16254CT3 - Five Electrical/Data Boxes LA-10850CT3 - If Worksurface End Options are ordered in the same as the Table Top, the Top will be a One-Piece Top with Center Inserts and not as shown in Line Drawing LA-13552CT3 and LA-16254CT3 - If Worksurface End Options are ordered in the same as the Table Top, the Top will be a Three-Piece Top with Center Inserts and not as shown in Line Drawing 50"D X 108"W LA-10850CT3 108 50 2.19 336 42 $ 16,512 Seats Six 52"D X 135"W LA-13552CT3 135.19 52 2.19 462 54 $ 21,335 Seats Eight 54"D X 162"W LA-16254CT3 162.38 54 2.19 622 66 $ 25,510 Seats 10 Worksurface End Center Insert BUW MMC EBY Wood (specify finish) - Standard Caesarstone $8,377 BZC HZC JBC Silestone $8,377 LRC Wood (specify finish) - Standard Caesarstone BZC HZC JBC LA-10850CT3 $2,856 LA-13552CT3 $4,286 LA-16254CT3 $5,710 Solid Surface $5,226 CWS CSS DMS MWS Leather Insert $3,602 See Green Hide Sierra at ofs.com for color selection. Silestone LRC LA-10850CT3 $2,856 LA-13552CT3 $4,286 LA-16254CT3 $5,710 Solid Surface CWS CSS DMS MWS LA-10850CT3 $1,783 LA-13552CT3 $2,674 LA-16254CT3 $3,566 Leather Insert See Green Hide Sierra at ofs.com for color selection. LA-10850CT3 $2,643 LA-13552CT3 $3,182 LA-16254CT3 $3,963 SPECIFY: worksurface end center insert. See page H for the designator finish name. LA-10850CT3 Worksurface End Center Insert KWG KWG 537

BOAT-SHAPED CONFERENCE TOP WITH END AND CENTER INSERT STANDARD FEATURES Grain Runs End-To-End Two Bases Required Includes Support Beam used between Bases Must specify Wood, Caesarstone, Silestone, Solid Surface or Leather Insert on Worksurface Ends and Center Inserts Edge Shape NOTES: If Worksurface End Options are ordered in the same as the Table Top, the Top will be a Three-Piece Top with Center Inserts and not as shown in Line Drawing Wood Ends and Center Inserts on CT3 Table Tops are for the option of specifying a different Wood or Material than the rest of the Table Top. If both Worksurface End and Center Insert Options are the same as the Table Top, order CT1 Table Top with Optional Electrical/Data Boxes. If Worksurface End Options are different but Center Insert Options are the same as the Table Top, order CT2 Table Top with Optional Electrical/ Data Boxes. Item Weights are based on Wood Tops. Weights will increase by Weight of Options specified (see page 582). See page 541 for Coordinating Bases and Wire Management Columns. See pages 580-581 for Optional Electrical/Data Inserts. Electrical/Data Boxes - Includes 7' Power Cord with Standard Plug, Handy Box and Daisy Chain Connectors. Each Box contains Two Electric Outlets, Two RJ-45 Universal Voice/Data Modules and Four Blanks per Side - Electric Components ship in a Separate Carton. Installation Instructions are included. LA-18956CT3 - Six Electrical/Data Boxes LA-21658CT3 - Seven Electrical/Data Boxes LA-24358CT3 - Eight Electrical/Data Boxes 56"D X 189"W LA-18956CT3 189 56 2.19 739 78 $ 30,279 Seats 12 58"D X 216"W LA-21658CT3 216.19 58 2.19 856 90 $ 34,875 Seats 14 58"D X 243"W LA-24358CT3 243.38 58 2.19 973 102 $ 39,782 Seats 16 Worksurface End Center Insert BUW MMC EBY Wood (specify finish) - Standard Caesarstone $8,377 BZC HZC JBC Silestone $8,377 LRC Wood (specify finish) - Standard Caesarstone BZC HZC JBC LA-18956CT3 $7,141 LA-21658CT3 $8,567 LA-24358CT3 $9,997 Solid Surface $5,226 CWS CSS DMS MWS Leather Insert $3,602 See Green Hide Sierra at ofs.com for color selection. Silestone LRC LA-18956CT3 $7,141 LA-21658CT3 $8,567 LA-24358CT3 $9,997 Solid Surface CWS CSS DMS MWS LA-18956CT3 $4,439 LA-21658CT3 $5,348 LA-24358CT3 $6,238 Leather Insert See Green Hide Sierra at ofs.com for color selection. LA-18956CT3 $4,593 LA-21658CT3 $5,284 LA-24358CT3 $5,901 SPECIFY: worksurface end center insert. See page H for the designator finish name. LA-18956CT3 Worksurface End Center Insert KWG KWG 538

LIGHTED BOAT-SHAPED CONFERENCE TOP WITH END AND CENTER INSERT STANDARD FEATURES Grain Runs End-To-End Lighted Worksurface Strips with Light Switch located in End Electrical/Data Box White Opaque Acrylic Covers for Lights Two Bases Required Includes Support Beam used between Bases Must specify Wood, Caesarstone, Silestone, Solid Surface or Leather Insert on Worksurface Ends and Center Inserts Edge Shape NOTES: Worksurface and Center Insert Options on CT4 Table Tops are for specifying a different Wood or Material than the rest of the Table Top. The same can be specified on Top, End and Center Inserts. Item Weights are based on Wood Tops. Weights will increase by Weight of Options specified (see page 582). See page 541 for Coordinating Bases and Wire Management Columns. See pages 580-581 for Optional Electrical/Data Inserts. Electrical/Data Boxes - Includes 7' Power Cord with Standard Plug, Handy Box and Daisy Chain Connectors. Each Box contains Two Electric Outlets, Two RJ-45 Universal Voice/Data Modules and Four Blanks per Side - Electric Components ship in a Separate Carton. Installation Instructions are included. LA-10850CT4 - Three Electrical/Data Boxes LA-13552CT4 - Four Electrical/Data Boxes LA-16254CT4 - Five Electrical/Data Boxes LA-10850CT4 - If Worksurface End Options are ordered in the same as the Table Top, the Top will be a One-Piece Top with Center Inserts and not as shown in Line Drawing LA-13552CT4 and LA-16254CT4 - If Worksurface End Options are ordered in the same as the Table Top, the Top will be a Three-Piece Top with Center Inserts and not as shown in Line Drawing 50"D X 108"W LA-10850CT4 108 50 2.19 336 42 $ 18,166 Seats Six 52"D X 135"W LA-13552CT4 135.19 52 2.19 462 54 $ 23,404 Seats Eight 54"D X 162"W LA-16254CT4 162.38 54 2.19 622 66 $ 28,387 Seats 10 Worksurface End Center Insert BUW MMC EBY Wood (specify finish) - Standard Caesarstone $8,377 BZC HZC JBC Silestone $8,377 LRC Wood (specify finish) - Standard Caesarstone BZC HZC JBC LA-10850CT4 $2,856 LA-13552CT4 $4,286 LA-16254CT4 $5,710 Solid Surface $5,226 CWS CSS DMS MWS Leather Insert $3,602 See Green Hide Sierra at ofs.com for color selection. Silestone LRC LA-10850CT4 $2,856 LA-13552CT4 $4,286 LA-16254CT4 $5,710 Solid Surface CWS CSS DMS MWS LA-10850CT4 $1,783 LA-13552CT4 $2,674 LA-16254CT4 $3,566 Leather Insert See Green Hide Sierra at ofs.com for color selection. LA-10850CT4 $2,643 LA-13552CT4 $3,182 LA-16254CT4 $3,963 SPECIFY: worksurface end center insert. See page H for the designator finish name. LA-10850CT4 Worksurface End Center Insert KWG KWG 539

LIGHTED BOAT-SHAPED CONFERENCE TOP WITH END AND CENTER INSERT STANDARD FEATURES Grain Runs End-To-End Lighted Worksurface Strips with Light Switch located in End Electrical/Data Box White Opaque Acrylic Covers for Lights Two Bases Required Includes Support Beam used between Bases Must specify Wood, Caesarstone, Silestone, Solid Surface or Leather Insert on Worksurface Ends and Center Inserts Edge Shape NOTES: If Worksurface End Options are ordered in the same as the Table Top, the Top will be a Three-Piece Top with Center Inserts and not as shown in Line Drawing Worksurface and Center Insert Options on CT4 Table Tops are for specifying a different Wood or Material than the rest of the Table Top. The same can be specified on Top, End and Center Inserts. Item Weights are based on Wood Tops. Weights will increase by Weight of Options specified (see page 582). See page 541 for Coordinating Bases and Wire Management Columns. See pages 580-581 for Optional Electrical/Data Inserts. Electrical/Data Boxes - Includes 7' Power Cord with Standard Plug, Handy Box and Daisy Chain Connectors. Each Box contains Two Electric Outlets, Two RJ-45 Universal Voice/Data Modules and Four Blanks per Side - Electric Components ship in a Separate Carton. Installation Instructions are included. LA-18956CT4 - Six Electrical/Data Boxes LA-21658CT4 - Seven Electrical/Data Boxes LA-24358CT4 - Eight Electrical/Data Boxes 56"D X 189"W LA-18956CT4 189 56 2.19 739 78 $ 33,368 Seats 12 58"D X 216"W LA-21658CT4 216.19 58 2.19 856 90 $ 38,906 Seats 14 58"D X 243"W LA-24358CT4 243.38 58 2.19 973 102 $ 44,443 Seats 16 Worksurface End Center Insert BUW MMC EBY Wood (specify finish) - Standard Caesarstone $8,377 BZC HZC JBC Silestone $8,377 LRC Wood (specify finish) - Standard Caesarstone BZC HZC JBC LA-18956CT4 $7,141 LA-21658CT4 $8,567 LA-24358CT4 $9,997 Solid Surface $5,226 CWS CSS DMS MWS Leather Insert $3,602 See Green Hide Sierra at ofs.com for color selection. Silestone LRC LA-18956CT4 $7,141 LA-21658CT4 $8,567 LA-24358CT4 $9,997 Solid Surface CWS CSS DMS MWS LA-18956CT4 $4,439 LA-21658CT4 $5,348 LA-24358CT4 $6,238 Leather Insert See Green Hide Sierra at ofs.com for color selection. LA-18956CT4 $4,593 LA-21658CT4 $5,284 LA-24358CT4 $5,901 SPECIFY: worksurface end center insert. See page H for the designator finish name. LA-18956CT4 Worksurface End Center Insert KWG KWG 540

TABLE BASE STANDARD FEATURES Two Bases Shown Adjustable Heavy-Duty Levelers Overall Height with Top 30" Arm Clearance 27.75" NOTE: For Tables with Electrical/Data Boxes LA-CTB - Power Hookup will be Routed through One End Base. For Alternate Routing of Power Hookup from Center of Table, a Center Wire Management Column must be specified (see below). LA-CTBT - Power Hookup must be Routed from Center of Table, a Center Wire Management Column must be specified (see below) CONFERENCE LA-CTB 30 11.5 27.75 60 8 $ 1,964 Wood 1.5" Diameter Half Tubular Aluminum Accents Wire Management Access Door PANEL CONFERENCE LA-CTBT 29 4.5 27.75 40 8 $ 1,199 Wood with 3"H Aluminum Laminate Reveal CENTER WIRE MANAGEMENT COLUMN STANDARD FEATURES Conceals Wires Routed from Center of Table to Floor Wire Management Access Panel Fits below Support Beam Accommodates 6"W x 6"D Electrical Floor Plate LA-CTBC 8.63 8.63 19.25 27 4 $ 581 Wood LA-CTBCT 8.63 8.63 19.25 27 4 $ 721 Wood with 3"H Aluminum Laminate Reveal MMC BUW EBY SPECIFY:. See page H for the designator finish name. LA-CTB 541

SQUIRCLE-SHAPED CONFERENCE TOP STANDARD FEATURES Squircle (Squared Circle) Shape Grain Runs End-To-End Seats Four Use with LA-30SQB Base (see page 544) or LA-30BHSB Base (see page 545) Edge Shape One Optional Single Electrical/Data Box includes Two Electric Outlets, Two RJ-45 Connectors and Four Blanks - Electric Components ship in a Separate Carton. Installation Instructions are included. NOTES: Item Weights are based on Wood Tops. Weights will increase by Weight of Options specified (see page 582). See pages 580-581 for Optional Electrical/Data Inserts. 48" LA-48SQT 48 48 2.19 120 7 $ 3,181 NP NN MMC BUW EBY Electrical/Data Boxes NP No Electrical/Data Boxes - Standard NN Electrical/Data Boxes $769 SPECIFY: electrical/data boxes (if applicable). See page H for the designator finish name. LA-48SQT Electrical/Data Boxes NP 542

SQUIRCLE-SHAPED CONFERENCE TOP STANDARD FEATURES Squircle (Squared Circle) Shape Grain Runs End-To-End on each Individual Section Optional Center Insert (No Electrical/Data) Edge Shape 59.5" NP LA-60SQT 59.5 59.5 2.19 210 8 $ 4,222 Seats Four to Six Use with LA-36SQB Base (see page 544) or LA-36BHSB Base (see page 545) Item Weights are Based on Wood Tops. Weights will increase by Weight of Options specified (see page 582). See pages 580-581 for Optional Electrical/Data Inserts. Optional (EDB) Electrical/Data Boxes (Two Single Boxes) include Two Electric Outlets, Two RJ-45 Connectors and Four Blanks in each Box, Two Matching Aluminum Inserts, Wood Center Insert and White Opaque Acrylic Corner Inserts - Electric Components ship in a Separate Carton. Installation Instructions are included. Center Insert (4) white opaque acrylic in corners (2) electrical/data boxes (1) center wood section matching to table top EDB (2) aluminum inserts matching to electrical/data boxes 72" NP LA-72SQT 72 72 2.19 245 11 $ 5,870 Seats Six to Eight Use with LA-42SQB Base (see page 544) or LA-42BHSB Base (see page 545) Item Weights are Based on Wood Tops. Weights will increase by Weight of Options specified (see page 582). See pages 580-581 for Optional Electrical/Data Inserts. Optional Single Electrical/Data Boxes (Four Single Boxes) include Two Electric Outlets, Two RJ-45 Connectors and Four Blanks in each Box, Wood Center Insert and White Opaque Acrylic Corner Inserts - Electric Components ship in a Separate Carton. Installation Instructions are included. Center Insert (4) white opaque acrylic in corners (4) electrical/data boxes (1) center wood section matching to table top EDB Center Insert BUW MMC EBY NP No Center Insert - Standard EDB Electrical/Data Boxes with matching Wood Center Insert (finish will be the same as specified for Conference Top) LA-60SQT $1,833 LA-72SQT $3,517 Caesarstone BZC HZC JBC LA-60SQT $2,001 LA-72SQT $2,398 Silestone LRC LA-60SQT $2,001 LA-72SQT $2,398 Leather Insert See Green Hide Sierra at ofs.com for color selection. LA-60SQT $1,147 LA-72SQT $1,286 Solid Surface CWS CSS DMS MWS LA-60SQT $1,251 LA-72SQT $1,499 SPECIFY: center insert (if applicable). See page H for the designator finish name. LA-60SQT Center Insert NP 543

SQUIRCLE-SHAPED CONFERENCE BASE STANDARD FEATURES Wood 1.5" Diameter Half-Tubular Aluminum Accents Wire Management Access Door Adjustable Levelers Overall Height with Top 30" Arm Clearance 27.75" Accommodates 6" x 6" Electrical Floor Plate FOR 48" TOP LA-30SQB 30 30 27.75 76 19 $ 3,669 Use with LA-48SQT Top FOR 60" TOP LA-36SQB 36 36 27.75 83 24 $ 4,364 Use with LA-60SQT Top FOR 72" TOP LA-42SQB 42 42 27.75 94 35 $ 5,060 Use with LA-72SQT Top MMC BUW EBY SPECIFY:. See page H for the designator finish name. LA-30SQB 544

BAR HEIGHT SQUIRCLE TABLE BASE STANDARD FEATURES Wood 1.5" Diameter Half-Tubular Aluminum Accents Wire Management Access Door LA-36BHSB and LA-42BHSB - Adjustable Levelers Overall Height with Top 42" Arm Clearance 39.75" Accommodates 6" x 6" Electrical Floor Plate FOR 48" TOP LA-30BHSB 30 30 39.75 95 26 $ 3,961 Use with LA-48SQT Top FOR 60" TOP LA-36BHSB 36 36 39.75 108 36 $ 4,712 Use with LA-60SQT Top FOR 72" TOP LA-42BHSB 42 42 39.75 123 48 $ 5,467 Use with LA-72SQT Top MMC BUW EBY SPECIFY:. See page H for the designator finish name. LA-30BHSB 545

MEDIA WALL FOR RECESSED TV SPECIFICATION FORM PLEASE FAX FORM ALONG WITH YOUR PURCHASE ORDER TO OFS AT 812.683.7256. DEALER NAME P.O. NUMBER ADDRESS DATE CITY, STATE, ZIP CONTACT NAME TELEPHONE NUMBER FAX NUMBER EMAIL ADDRESS SELECT MEDIA WALL LA-7352MWR (1 TV) LA-11052MWR (2 TVs) TV BRAND NAME TV WIDTH DEPTH HEIGHT OVERALL OUTSIDE DIMENSIONS OF EACH TV (excluding TV stand/base) PLEASE NOTE: Recess opening for TV will allow approximately 0.25" clearance on all 4 sides of TV and approximately 0.25" between the 2 TVs if ordering LA-11052MWR. Media Walls provide wire pass thru for access to outlet below the unit. If wall electrical access is needed directly behind the TV, please contact your Customer Service Representative for ordering instructions. A drawing showing the location of wall electrical access cutout will be provided for final approval prior to scheduling of the purchase order. When specifying dimensions for the TV, please verify that specifications on the carton or spec sheet are actual size of the outside dimensions of the TV without the base. TV measurements are the responsibility of the specifier. OFS cannot be held responsible for errors in measurements given. 546

PRODUCT FEATURES MEDIA WALLS FOR RECESSED TVS (TV not included) 8.125" Optional Crown - see bulkhead and crown options on pages 123 and 125. Recessed TV Not Included 52.4375" Media Wall can be used alone or mounted above credenza. If used with credenza, Media Wall can be located on top the worksurface. If located above the worksurface, filler panel can be used to conceal wires. 1.5" Diameter Half-Tubular Aluminum Accent 96.125" - 108.125" 0-12" 35.5625" FILLER PANEL 12" Filler Panel attaches to Media Wall above Credenza. Filler Panel can be cut to required size during installation. Back inset 2" to allow for wire management. Power Access Grommet Hole Glass Speaker Shelf/ Camera Ledge TV Wires run through access holes for power access..25" gap behind shelf allows wires to pass through. Optional wood DVD player shelf When optional wood DVD player shelf is not specified, wires run through grommet hole located above glass shelf. When specifying optional wood DVD player shelf, wires run through grommet hole located below glass shelf. Media walls are hung using hardwood knife-edge cleats (included) fastened to wall studs. ROUTING WIRES HANGING MEDIA WALLS TV MOUNTING BRACKETS FOR MEDIA WALLS PAGES 139 and 141 & LA-5195MWB ON PAGE 143. NOTE: Installers are responsible for selecting and supplying appropriate fasteners for wall conditions. Improper installation may cause damage or serious injury. If you have any doubts about the safety of the installation, please contact a qualified contractor. OFS cannot be held liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use. 547

PRODUCT FEATURES MEDIA WALLS FOR NON-RECESSED TVS (TV not included) Non-Recessed TV Not Included 1.5" Diameter Half-Tubular Aluminum Accent VERTICAL MEDIA WALL Used for vertical TV applications. Glass Speaker Shelf/Camera Ledge Power Access Grommet Hole Glass Shelf Power Access Grommet Hole NOTE: Some TVs do not include vertical TV application for portrait display. In those instances, it may be necessary to purchase software program to rotate image from landscape to portrait orientation. Determination of the appropriate TV and software for vertical application is the responsibility of the customer. TV Wires run through access holes for power access..25" gap behind shelf allows wires to pass through. TV MOUNTING BRACKETS FOR MEDIA WALLS PAGES 139 and 141 & LA-5195MWB ON PAGE 143. Optional wood DVD player shelf When optional wood DVD player shelf is not specified, wires run through grommet hole located above glass shelf. ROUTING WIRES When specifying optional wood DVD player shelf, wires run through grommet hole located below glass shelf. Media walls are hung using hardwood knife-edge cleats (included) fastened to wall studs. HANGING MEDIA WALLS TV MOUNTING BRACKET FOR VERTICAL MEDIA WALLS LA-5266MWVS AND LA-5272MWVS-PAGE 143. NOTE: Installers are responsible for selecting and supplying appropriate fasteners for wall conditions. Improper installation may cause damage or serious injury. If you have any doubts about the safety of the installation, please contact a qualified contractor. OFS cannot be held liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use. 548

MEDIA WALL STANDARD FEATURES Wall Mounted 1.5" Diameter Half-Tubular Aluminum Accents TV-To-Floor Wire Management Capabilities Glass Speaker Shelf/Camera Ledge Optional Wood DVD Player Shelf Optional Bulkhead or Crown available (see page 550) NOTE: Installers are responsible for selecting and supplying Appropriate Fasteners for Wall Conditions. Improper installation may cause Damage or Serious Injury. If you have any Doubts about the Safety of the Installation, please Contact a Qualified Contractor. OFS cannot be held Liable for Damage or Injury caused by Incorrect Mounting, Incorrect Assembly or Incorrect use. FOR RECESSED TV LA-7352MWR 73 19 52.44 214 51 $ 13,817 Swing out Flat Panel TV Mount - TV will recess Fully or Partially, according to Depth of TV Fits Most Flat Panel TVs up to 42" (TV not included) Maximum Height for Flat Panel TV: 30.5" NOTE: Media Wall Specification Form must accompany Purchase Order for Media Walls (see page 546). Please complete and fax Form along with your Purchase Order to OFS at 812-683-7256. FOR NON-RECESSED TV LA-7352MWF 73 19 52.44 234 51 $ 12,951 Swing out Flat Panel TV Mount - TV will not recess Fits Most Flat Panel TVs up to 50" (TV not included) Maximum Height for Flat Panel TV: 34" MMC BUW EBY Wood DVD Player Shelf NR No Wood DVD Player Shelf - Standard NS Wood DVD Player Shelf (specify finish) $958 SPECIFY: shelf. See page H for the designator finish name. LA-7352MWR Wood DVD Player Shelf NR 549

MEDIA WALL STANDARD FEATURES Use with 73"W Media Walls LA-7309BH and LA-8113CW - ed on Left, Front and Right Sides NOTE: Installers are responsible for selecting and supplying Appropriate Fasteners for Wall Conditions. Improper installation may cause Damage or Serious Injury. If you have any Doubts about the Safety of the Installation, please Contact a Qualified Contractor. OFS cannot be held Liable for Damage or Injury caused by Incorrect Mounting, Incorrect Assembly or Incorrect use. FILLER PANEL LA-73FP 73 2.75 12 24 3 $ 1,543 Conceals Wires between Media Wall and Credenza Attaches to Media Wall NOTE: Filler Panel is Standard at 12"H. Can be cut to Required Height during Installation BULKHEAD LA-7309BH 73 9 8.13 38 5 $ 1,579 CROWN LA-8113CW 81 13 8.13 47 7 $ 2,614 Must Specify (NT) Curve or (NU) Reed Edge Option NT NU MMC BUW EBY Crown Edge (LA-8113CW only) NT Curve NU Reed SPECIFY: crown edge (if applicable). See page H for the designator finish name. LA-73FP Crown Edge (LA-8113CW only) 550

MEDIA WALL STANDARD FEATURES Wall Mounted 1.5" Diameter Half-Tubular Aluminum Accents TV-To-Floor Wire Management Capabilities Glass Speaker Shelf/Camera Ledge Optional Wood DVD Player Shelf Optional Bulkhead or Crown available (see page 552) NOTE: Installers are responsible for selecting and supplying Appropriate Fasteners for Wall Conditions. Improper installation may cause Damage or Serious Injury. If you have any Doubts about the Safety of the Installation, please Contact a Qualified Contractor. OFS cannot be held Liable for Damage or Injury caused by Incorrect Mounting, Incorrect Assembly or Incorrect use. FOR RECESSED TVS LA-11052MWR 110.25 19 52.44 270 76 $ 22,084 Swing Out Flat Panel TV Mounts - TV will recess Fully or Partially, according to Depth of TVs Fits Most Flat Panel TVs between 35.625" and 42.5" (TVs not included) Maximum Height for Flat Panel TV: 30.5" NOTE: Media Wall Specification Form must accompany Purchase Order for Media Walls (see page 546). Please complete and fax Form along with your Purchase Order to OFS at 812-683-7256. FOR NON-RECESSED TVS LA-11052MWF 110.25 19 52.44 290 76 $ 20,961 Swing Out Flat Panel TV Mounts - TV will not recess Fits Most Flat Panel TVs up to 42" (TVs not included) Maximum Height for Flat Panel TV: 34" MMC BUW EBY Wood DVD Player Shelf NR No Wood DVD Player Shelf - Standard NS Wood DVD Player Shelf (specify finish) $1,845 SPECIFY: shelf. See page H for the designator finish name. LA-11052MWF Wood DVD Player Shelf NR 551

MEDIA WALL STANDARD FEATURES Use with 110.25"W Media Walls LA-11009BH and LA-11813CW - ed on Left, Front and Right Sides NOTE: Installers are responsible for selecting and supplying Appropriate Fasteners for Wall Conditions. Improper installation may cause Damage or Serious Injury. If you have any Doubts about the Safety of the Installation, please Contact a Qualified Contractor. OFS cannot be held Liable for Damage or Injury caused by Incorrect Mounting, Incorrect Assembly or Incorrect use. FILLER PANEL LA-110FP 110.25 2.75 12 32 5 $ 2,182 Conceals Wires between Media Wall and Credenza Attaches to Media Wall NOTE: Filler Panel is Standard at 12"H. Can be cut to Required Height during Installation. BULKHEAD LA-11009BH 110.25 9 8.13 49 7 $ 2,230 CROWN LA-11813CW 118.25 13 8.13 69 11 $ 3,551 Must Specify (NT) Curve or (NU) Reed Edge Option NT NU MMC BUW EBY Crown Edge (LA-11813CW only) NT Curve NU Reed SPECIFY: crown edge (if applicable). See page H for the designator finish name. LA-110FP Crown Edge (LA-8113CW only) 552

MEDIA WALL STANDARD FEATURES TV Not Included Wall Mounted Swing Out Flat Panel TV Mount - TV Mount Arm only will Recess LA-5266MWVS and LA-5272MWVS - Fits Most Flat Panel TVs up to 40" (TV not included) LA-5266MWVS and LA-5272MWVS - Cutout for Wire Management responsibility of Installer LA-5272MWVS and LA-5195MWB - Glass Shelf NOTE: Installers are responsible for selecting and supplying Appropriate Fasteners for Wall Conditions. Improper installation may cause Damage or Serious Injury. If you have any Doubts about the Safety of the Installation, please Contact a Qualified Contractor. OFS cannot be held Liable for Damage or Injury caused by Incorrect Mounting, Incorrect Assembly or Incorrect use. VERTICAL LA-5266MWVS 52 9 66 124 25 $ 4,327 VERTICAL WITH GLASS SPEAKER SHELF LA-5272MWVS 52 19 72 146 50 $ 5,305 Optional Wood DVD Player Shelf WITH WIRE MANAGEMENT LA-5195MWB 51 16 95 146 50 $ 8,969 Fits Most Flat Panel TVs up to 50" (TV not included) 1.5" Diameter Half-Tubular Aluminum Accents Wire Management Section Conceals Wires from TV to Wall Receptacle MMC BUW EBY Wood DVD Player Shelf (LA-5272MWVS only) NR No Wood DVD Player Shelf - Standard NS Wood DVD Player Shelf (specify finish) $729 SPECIFY: shelf (if applicable). See page H for the designator finish name. LA-5266MWVS Wood DVD Player Shelf (LA-5272MWVS only) 553

HOSPITALITY CART STANDARD FEATURES Glass Serving Shelf Two Doors 1.5" Diameter Half-Tubular Aluminum Accent above Doors One Adjustable Shelf behind Left Door Waste Bin behind Right Door Casters Optional Undershelf Materials Edge Shape NOTE: Item Weights are Based on Wood Shelves. Weights will Increase by Weight of Option Specified (see page 582). LA-3620HC 36.75 20 41.38 140 20 $ 2,718 LECTERN STANDARD FEATURES Removable Sloped Shelf with Paper/Book Stop 19"W x 13"D x 4"H Pull-Out Stepping Stool Wire Management 1.5" Diameter Half-Tubular Aluminum Accents Optional Light - Eight Watt Black Slimline Fluorescent Fixture - UL Listed Optional Round Power/Data Grommet with Wire Pass-Thru, Two 110 Volt Outlets and Two Cat.5e Universal Data Modules Optional Multi-Flex Condenser Microphone Sound System Not included Optional Decorative Top Shelf Surface Materials Edge Shape NOTE: Item Weights are Based on Wood Shelves. Weights will Increase by Weight of Option Specified (see page 582). LA-48LE 34 22 48 152 24 $ 8,244 Shelf Light (LA-48LE only) Power/Data Grommet (LA-48LE only) Microphone (LA-48LE only) BUW MMC EBY Wood (specify finish) - Standard Caesarstone BZC HZC JBC LA-3620HC (Undershelf) $7,572 LA-48LE (Decorative Top Shelf) $1,431 Silestone LRC LA-3620HC (Undershelf) $7,572 LA-48LE (Decorative Top Shelf) $1,431 NV No Light - Standard NW Light $230 NP No Power/Data Grommet - Standard PQ Power/Data Grommet $599 PR No Microphone - Standard PS Multi-flex Condenser Microphone $1,461 Solid Surface CWS CSS DMS MWS LA-3620HC (Undershelf) $4,685 LA-48LE (Decorative Top Shelf) $897 SPECIFY: shelf light (if applicable) power/data grommet (if applicable) microphone (if applicable). See page H for the designator finish name. LA-3620HC Shelf Light (LA-48LE only) Power/Data Grommet (LA-48LE only) Microphone (LA-48LE only) KWG 554

PRODUCT FEATURES CREDENZAS 12"D Optional Glass Ledge Aluminum Ledge Supports.75" thick tops are available in wood, granite, or solid surface 1.5" diameter half-tubular aluminum accents WOOD DOOR LOCKS Back inset 2" to allow for wire management. Cutlery Tray in 1 Box Drawer Optional Slide Out Rack Rail System Storage Cabinets and Credenzas can be modified w/lock on single wood door or pair of doors. Add $150 List Price for each lock. Modifications must be clearly designated on customer s purchase order by placing MOD#10 in front of the model number and noting the modification needed. Example: MOD#10-LA-5424CR3---LV-HC-PT modified with lock in left door and in right pair of doors. OPTIONAL SLIDE OUT RACK RAIL SYSTEM Available on double door credenzas and TV cabinets. OPTIONAL SLIDE OUT SHELVING SYSTEM Available on double door credenzas and TV cabinets. CULTLERY TRAY Additional Slide Out Equipment Rack components are available at www.middleatlantic.com 555

MEDIA PANELS AND STORAGE CABINETS Crown with Optional Recessed Lights Crown with Optional Remote Control Projection Screen and Optional Recessed Lights LA-7352DSP with Glass Display Shelves 7.875" D Glass Display Shelves Crown with Optional Recessed Lights.75" Thick Top with Knife Edge on Credenzas and Display Cabinets. WALL UNITS WITH MEDIA PANELS Touch switches for lighted cabinets are located behind doors. Wall units can be specified with or without bulkheads or crowns (see pages 566-571). Aluminum frame clear glass doors specified for top and/or bottom doors include light in upper section and glass adjustable shelves in upper and bottom section. Wood or aluminum frame frosted glass doors do not include lights and include wood adjustable shelves. Wood panel, aluminum frame frosted glass or aluminum frame clear glass door options. Extruded Aluminum Door Frames STORAGE CABINET Back inset 2" to allow for wire management. Lighting & glass shelves in top section are standard when clear glass door(s) is specified. MEDIA PANEL LA-7352MP with Optional 7.875" D Glass Shelf. See page 155 for media panel selection and shelf options. Media panel is placed on top of credenza and fastens to cabinet on each side of credenza using supplied fasteners. Mounts on credenza between (2) 88" H storage cabinets only. 556