Technical Application Guide for UP-SHINE LED Grille Downlight UP-RD4-24W
Introduction Up-shine rectangular LED grille downlight is unique designed with COB high power LED chip. High efficient reflector with COB LED provides high lumen output and wide beam angle. Single head, double head and triple head provided for wide choice. Adjustable lighting direction offers various lighting orientation. Up to 7% energy saving compared to standard CFL Long lifetime of 4, hours 24 wide beam angle L245*W85mm cutout CCT: 27K 3K 4K 5K Adjustable and rotary No UV/IR light Environment friendly, without Mercury or any other hazardous substances Application notes IP2 for indoor use only Professional electrician for installation only Switch off before installation Do not touch when in use Keep away from hot steam and corrosive gas Application Areas It is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc. Certificate
1 135 14 Product Information 26 Technical Specifications Model Voltage Power Power Factor Lumen (±5%) Beam angle CCT Lifespan CRI Dimension UP-RD4-24W AC23V 24W.9 155 24 27K 4h 8 UP-RD4-24W AC23V 24W.9 16 24 3K 4h 8 UP-RD4-24W AC23V 24W.9 17 24 4K 4h 8 UP-RD4-24W AC23V 24W.9 17 24 5K 4h 8 Driver data Sheet L26*W1*H135mm L26*W1*H135mm L26*W1*H135mm L26*W1*H135mm Driver data Input rated Voltage Frequency Input Voltage Non dim AC23V 5Hz AC2-24V Efficiency 85% Total load Wattage 24W±5% Power Factor.9 Rated input current Full load output Voltage Rated output current Output current range.14a DC27-4V 55mA 55mA±5% Power tolerance ±5% Current output tolerance ±5% Dimming range Dimmer Short circuit protection Over voltage protection Over temperature protection PASS PASS PASS THD 2% Withstand voltage AC15V Fixture Compatibility Rated Wattage Electrical Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 24W Ⅰ IP2-2 o C~45 o C ~9% -2 o C~65 o C
Spectral Distribution 27K 3K.8 Max=1457 [1.=2] 4.94 SDCM F27K.8 Max=17357 [1.=2] 2.53 SDCM F3K.7.7.6.6.5.4.3 x=.4656 y=.4127.5.4.3 x=.4452 y=.4111.2.2.1.1. 38 5 6 7 8. 38 5 6 7 8 4K 5K.8 Max=216 [1.=2] 3.11 SDCM F4K.6 Max=2258 [1.=2] 3.8 SDCM F5K.7.5.6.5.4.3 x=.3973 y=.396.4.3.2 x=.365 y=.3793.2.1.1. 38 5 6 7 8. 38 5 6 7 8 Photometric Diagram 27K 3K Polar intensity diagram Cartesian intensity diagram Beam diagram Polar intensity diagram Flux out: 514.5 lm -/+18 Planar Illuminance Curve -/+18 MH=1m -12 12-12 12 55. C/18 C9/27 49.5-9 9 44. -9 9 11 38.5 1 33. 22 2 27.5 33 22. 3 16.5 44 4 11. 55 5-3 3 5.5-3 3 Cartesian intensity diagram Planar Illuminance Curve MH=1m 5 C/18 C9/27 45 4 35 3 25 2 15 1 5 Beam diagram Flux out: 468.2 lm -25-2 -15-1 -5 5 1 15 2 25-25 -2-15 -1-5 5 1 15 2 25 Height Eavg, Emax Angle: 23.77deg Diameter Height Eavg, Emax Angle: 24.23deg Diameter AVERAGE BEAM ANGLE(5%): 23.9 DEG AVERAGE BEAM ANGLE(5%): 24.5 DEG 4K 5K Polar intensity diagram Cartesian intensity diagram Beam diagram Polar intensity diagram Cartesian intensity diagram Beam diagram -/+18-12 12-9 9 11 22 33 44 55-3 3 AVERAGE BEAM ANGLE(5%): 24.7 DEG Planar Illuminance Curve MH=1m 55. C/18 C9/27 49.5 44. 38.5 33. 27.5 22. 16.5 11. 5.5-25 -2-15 -1-5 5 1 15 2 25 Flux out: 581. lm Height Eavg, Emax Angle: 24.47deg Diameter -/+18-12 12-9 9 11 22 33 44 55-3 3 AVERAGE BEAM ANGLE(5%): 25.4 DEG Planar Illuminance Curve MH=1m 55. C/18 C9/27 49.5 44. 38.5 33. 27.5 22. 16.5 11. 5.5-25 -2-15 -1-5 5 1 15 2 25 Flux out: 561.3 lm Height Eavg, Emax Angle: 24.43deg Diameter
Polar Diagram Comparison -15 O 18 O 15 O -12 O 12 O -9 O 9 O 11 22-6 O 33 6 O 44-3 O 55 3 O O AVERAGE BEAM ANGLE (5%): 25.4DEG C/18, 26. deg C3/21, 26. deg C6/24, 25.2 deg C9/27, 24.3 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11%.4 Lifetime (hours) 8 7 6 5 4 3 2 1 65 o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85%.35.3.25.2.15 8% 75% FLUX.1.5 U'V' 7%. 1 2 3 4 5 6 7 8 9 1 LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C 8 Temperature ( o C) 7 6 5 4 3 2 1 18:37:46 19:7:44 19:37:44 2:7:44 2:37:44 21:7:44 21:37:44 22:7:44 23:7:44 23:37:44 :7:44 :37:44 1:7:44 1:37:44 2:7:44 2:37:44 3:7:44 3:37:44 4:7:44 4:37:44 5:7:44 5:37:44 6:7:44 6:37:44 7:7:44 7:37:44 8:7:44 8:37:44 9:7:44 Time The driver lifespan is based on capacitor working temperature. IC Capacitor MOS PCB LED Fitting Environmental temperature
Installation WARNING 1.Switch off before installation. 2.Switch on only after complete installation and examination of the circuit. 3.Professional electrician for installation and maintenance only. Turn Off Power Supply Step 1 Turn Off power supply before starting any installation. Read instructions & check you have all the tools & accessories to complete the installation correctly. Step 2 Step 3 L = = N = SWITCHED EARTH NEUTRAL Open a hole on the ceiling according to cutout size of the lamp. Locking AC-L and AL-N into terminal blocks respectively. Ensure insulation protection measures done well. Step 4 Step 5 Rotate anticlockwise the screw which connected with installation fastener until fastener shrink back into lamp, then push whole lamp into hole. Rotate clockwise the screw which connected with installation fastener until fastener fix the ceiling tightly. Step 6 Ensure lamp fixture is securely fixed; install complete, switch on.
Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 41.5*31*35.5 2.4 16.5 6 2'' standard container 4'' standard container CTNS Q'TY(PCS) VOLUME(CBM) 6 36 28 12 72 56 Phone: +86 755 2919 7389 Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China