Horizontal- Boring and Milling Machine and Machining Center with spindle diameter 110 mm - table type UNION T / TC PDF Free Download

Horizontal- Boring and Milling Machine and Machining Center with spindle diameter 110 mm - table type UNION T / TC 110

The UNION T / TC 110 a new generation of CNC boring mills and machining centers - proof of continual technical development With this machine size UNION will continue the success story of the well known machines BFT 90, 102, 105 and 110 which are world wide in operation and which prove there performance and accuracy daily. The machines can be supplied as CNC boring mills T 110 or as a machining center TC 110 with automatic tool changer or automatic pallett changer. TC 110 without endclosure and operator guarding General Specification Boring spindle diameter 110 mm X = 1500 or 2000 mm Y = 1250 or 1600 mm Z = 1000 or 1500 mm W = 550 mm Table: 1000 x 1250 or 1250 x 1600 mm Max. table loading 6000 kg Main power max. 33 kw Control Heidenhain: itnc 530 or Siemens 840 D Main Features 5 axes contouring control from Heidenhain, Siemens or FANUC Digital infinitely variable AC drive technique, high power Vertical traverse of headstock without counter weight balance, but with a more powerful digital drive system. Headstock with a projected main bearing system and precision spindle bearings Nitrided axially traversing boring spindle with speeds up to 4000 rpm Backlash-free ball screws for all linear traversing axes Wide machine bed with 4 guides for the longitudinal traverse of the table saddle Precise guiding of all slides by compact-roller guides guarantees highest machining accuracy Ecologically guarding of the machining area with chip disposal 5-side machining with add-on special accessories such as vertical and universal milling heads Available with different izes of automatic pallett changers for components up to 4 tons weight Proven UNION quality ensures lasting precision and reliability with the new series of machines T / TC 110

The heart of the machine UNION T / TC 110 the headstock with the main spindle bearing will be manufactured and fitted exclusively from UNION Headstock of the T / TC 110 (KW) 33 27 T (C) 110 AC-Motor: Siemens IPH7 163-2Nd... / -2NF... Power: 22 KW-SI; 27 KW resp. increased Power: 30 KW-SI; 33 KW P mot (Nm) 2012 1639 366 298 M Sp Main bearing system The precision spindle bearings are fitted in a large dimensioned none moveable quill which is mounted in the headstock housing. This design enabled a projected front bearing of the boring spindle 300 mm outside of the casting and is the guarantee for a high cutting performance in the main working range of the machine. The system is prepared for coolant through the spindle which can be supplied in different versions (optional). 1.09 0.9 5 range 1 range 1 Power torque diagram of the UNION T/TC 110 122 181 670 767 1004 range 2 range 2 4000 n Sp -1 (min ) Machining with most modern tooling requires a much higher cutting performance of the machine tools. UNION offers you a much higher torque at a range where it s really necessary for the cutting process - at speeds higher than 200 rpm. Headstock with detachable CNC-facing head D Andrea The machine can be supplied with a CNC controlled facing head which will be swiviled-in and fitted on a headstock mounted camlock flange. The head allows the machining of large, external diameters, bores, flange faces, ring slots, tapers and other contours. During automatic mode, the NC facing slide combined with other axes, offers an extensive application range.

CE- approved operations Operating panel - with electronical hand weel which can be manoeuvred into the working area for setting up Automatic mode after closure of folding door Safe guarding around the machine; fences with electrical interlocking The machine can be optional supplied with a full enclosure with or without roof 5-axes shopfloor-orientated CNC contouring control Controls: Heidenhain itnc 530 or Siemens 840 D Digital interface for the drives Controlled axes X, Y, Z, W and B Linear, circular and helical interpolation 10 TFT colour monitor with graphic functions Conversational programing with internal/external data transfer and actual programe display Operator guidance, test run with graphic simulation Hard disc program memory of up to 1.5 Gigabyte Cutter length & radius compensation, feed & speed override, datum point shift on all axes Operating modes: manual operation, MDI postioning, single block and automatic operation, background programing & editing during part-programe run in automatic Canned cygles: mode pecking, thread cutting, groove-, pocket- & frame milling, mirror image, shift and rotating of coordination system Polar co-ordinate and parameter programing Tangential contour approach and departure FK free contour programing with graphic support Serial data interface V.24 according RS-232-C and V.II/RS-422 Failure diagnosis for control, measuring systems and machine Other controls on request Pallet changer The CNC boring mill as well as the machining center can be supplied with automatic or manual pallet changer Automatic pallet changer: pallets are moved automatically from loading station to pallet carrier and return Automatic tool changer with magazine for 40 tools Manual pallet changer: pallets are moved via crane from loading station to machine table. Included in this operation is centering, damping & hydraulic clamping devices. Automatic Tool Changer (ATC) Standard version with tool magazine fitted on the back of the column and arched track system for the changer. Tool storage positions 40,60 Tool taper A 50 DIN 69871/72 other tapers on request Tool dia. (full magazine) 125 mm (max.) (5 ) Tool dia. (empty adjacent pockets) 250 mm ( 10 ) Tool length 500 mm (max.) (20 ) Tool weight 30 kg (66 lbs.) Machining center with APC in assembly stage

Precision and Reliabiliy - Made in Germany - the typical features of a UNION Horizontal Boring Mill Quality test The manufacturing and machining quality inspection and the acceptance test of all machines are based upon Union s quality assurance system which in turn is based upon DIN and ISO standards. Accuracy and performance tests of the boring and milling operations are carried out using a test component. Written record of machine s accuracy is provided in the form of a protocol. Quality determined parts will be checked on a measuring machine KMZ from Mauser. 6850 4925 Layout of a TC 110 Technical Data T / TC 110 Boring spindle Diameter mm ( ) 110 (4,33) Drive power kw (HP) 27 (33) Internal taper accord. to DIN 69871 ISO 50 Spindle speeds -1 min (rpm) 8...4000 Traverses axes Table cross traverse X mm ( ) 1500 / 2000 (59 and 78,7) Headstock vertical Y mm ( ) 1250 /1600 (49,2 and 63 Table longitudinal Z mm ( ) 1000 / 1500 (39,4 and 59) Boring spindle axial W mm ( ) 550 (21,7) Table rotation B degree 360 Table unit Table size mm ( ) 1000 x 1250 (39,4 x 49,2) optional mm ( ) 1250 x 1600 (49,2 x 63) Table load, max. kg (lbs) 6000 (13200) Centerring diameter mm ( ) 100 (3,94) T-slots spacing / width mm ( ) 22 / 125 (0,87 / 4,92) Feeds / rapid traverses Feeds on all axes mm/min (ipm) 1...15000 (0,04-590) Rapid traverse mm/min (ipm) 15000 (590) Rapid traverse table rotation -1 min (rpm) 3 Max. feed force X and Y axes N 16000 Max. feed force Z and W axes N 20000 Automatic tool changer Number of tools in magazine 40 (60) Max. tool diameter mm ( ) 250 (10) Max tool length mm ( ) 500 (20) Max. tool weight kg (lbs) 30 (66) Net weight of the basic machine kg (lbs) 19500 (42900) Technological parameters Operating modes: drilling, boring, precision & countersink boring, reaming, tapping, thread cutting, surface milling, circular and contour milling, 5 side machining by means of angular milling heads Accuracy s Deviation from a straight line 20 µm Deviation from true circle (internal boring) spindle output 160 mm, Ø 160 mm 8 µm Deviation from true circle (external circular milling) up to Ø 300 mm 16 µm Coaxility of above mentioned circles 20 µm Positioning accuracy according VDI/DGQ 3441 Axes X, Y, Z guaranteed achieved values values Positioning uncertainty P 0.020 mm 0,007 mm Positional scatter Psmax 0.010 mm 0,004 mm Reversal error Umax 0.005 mm 0,002 mm Positional deviation Pa 0.008 mm 0,003 mm Table positioning 90 positions +/-2 sec s/arc übrige Winkel +/-6 sec s/arc UNION is certified according the quality management system ISO 9001: 2000.

110 260 Special accessories / Options 210 90 15 320 320 Support bearing for heavy duty operations with extended boring spindle total length 465 mm, supporting length 365 mm Compact coolant unit 1 Coolant is supplied via separately controlled jet pipes. It is returned for recycling via the chip conveyor (not included in the basic version) into the compact unit for filtration and piped back into the system. Flow volume 30l/min with 3 jet pipes or Compact coolant unit 3 30 l/min with adjustable pump and 3 jet pipes at 3 bar pressure and appropriate filtration. Milling heads with automatic positioning On request UNION can supply vertical- and universal milling heads with Hirth-coupling (1 ) as well as 2-axes NC-milling head with continuously swivelling axes. Adapter for special accessory for milling spindle version To accomodate support bearings, vertical and universal milling heads etc. Can also be supplied for automatic head changing. Universal milling attachment Manual setting of certain angles in both planes according a calculation table. Length to the vertical spindle 700 mm 3D-measuring probe Touch trigger probe with radiotransmission to the machine control incl. software and measuring cycles. Coolant through boring spindle An additional high pressure coolant circuit together with a fine filter is installed on the compact coolant unit and ensures coolant supply to the cutting tool. Flow volume 30 l/min at 13,5 bar (higher pressure possible). Safety precautions The machine will be supplied with a CE approved enclosure, a safety door with windows at the operator stand - electrical interlocked. Further necessary safety equipment has to be defined in line with the local conditions at the customer site and the legality of the country and has to be installed before commissioning. An access to the working area of the machine for setting-up is ensured. Vertical milling head with utomatic positioning (360 x 1 ) and powered tool changer, max power 30 kw Universal milling head with automatic positioning (2 x 360 x 1 ) and powered tool changer, max power 25 kw

You will find our machines and our activities all over the world Innovation The earl concentration on the development and construction of horizontal borers made UNION a world renowned manufacturer producing leading machine tools for boring and milling operations. Our new unit construction system will convince you in every way. Flexibility Of course, we can t do everthing, but in the field of horizontal boring and milling UNION can offer satisfactory solutions. We will adapt our technique to your machining problem and to the benefit of our customer. Allow us to assist you. Quality The cornerstone of UNION success. From the product quality to technical advices and after-sales-service for UNION it is an all-embracing philosophy. Service Installation and commissioning, technological service, overhauling and modernisation, various special accessories for increased versatility, spare part service, repairs, re-location of machines, machining of large components. UNION Werkzeugmaschinen GmbH Chemnitz Clemens-Winkler-Straße 5 D - 09116 Chemnitz Post address UNION Werkzeugmaschinen GmbH Chemnitz P.O. Box 1142 D - 09070 Chemnitz Phone: (0371) 87 41-0 Fax: (0371) 87 41-322 E-Mail: info@union-machines.com http://www.union-machines.com We reserve the right to alter our products at any time for improvement. T-TC 11-3e