U.S. PTENT NOS. 6,688,816 and 6,824,333 S External threading within.070" of a shoulder. Internal ME threading with 1.250" minimum bore diameter. 4 threads per inch and greater. Sub-micron grain DUR-MX 2000 and 5000 arbides and High Speed Steel. Inserts can be coated with TiN, Ti, TiN and Diamond coating. Right Hand Insert & Toolholder Shown MODIFITIONS SEE PGE 8-3 FOR DDITIONL LUDED NGLE (TOP VIEW) USTOM THREDS (TOP VIEW) PG 8-5 N, SWISS, ONVENTIONL STYLE ROUND STYLE TOOLHOLDER THBIT KISER TOOL MDE U.S.. 3/4" GROOVE 3/4" GROOVE N KISER TOOL THBIT MDE U.S.. KISER TOOL O 1" ROUND REVER THBIT PG 7-3 PG 7-4 PG 7-7 PG 7-8 DEMONSTRTION SPEEDS ND FEEDS PPLITION REFERENE TROUBLESHOOTG TEHNIL SETIONS PG 9-18 PGS 9-3 & 9-4 PG 9-7 www.thinbit.com/qr4-11 4-11
ME S.820".145".240" FRONT RKE: 15 TOP RKE: 0 29 ME threading inserts for internal and external applications. ME threading tools can be used to cut other thread profiles by over cutting. Single lead Select the in the table below that represents your selection of orientation and insert grade. The for a right hand ME threading insert in DUR-MX 2000 with 10 or fewer T.P.I. is: LGT10D2R ME S FO. Insert Threads per Inch Flat at Tip Insert Grades See Page 9-5 for expanded material selections and Page 9-18 for Speeds and Feeds information DUR-MX 2000 arbide For Steel & Interrupted utting DUR-MX 5000 arbide For luminum & Nonferrous High Speed Steel oatings See page 9-6 for expanded coating descriptions Use Uncoated Part Number and dd oating ode TiN TiN TilN Diamond Toolholder atalog Section 7 Use Toolholders Beginning With 4.087" LGT04D2R LGT04D5R LGT04HSR 5.069" LGT05D2R LGT05D5R LGT05HSR entered right hand, left hand, internal and external threads 6.057" LGT06D2R LGT06D5R LGT06HSR 8.041" LGT08D2R LGT08D5R LGT08HSR 10.032" LGT10D2R LGT10D5R LGT10HSR 12.028" LGT12D2R LGT12D5R LGT12HSR 14.024" LGT14D2R LGT14D5R LGT14HSR add '' add 'D' add 'E' add 'F' Use right hand straight holder, or left hand 90º holder, for right hand external threads or left hand internal threads or Use left hand straight holder, or right hand 90º holder, for left hand external threads or right hand internal threads 16.021" LGT16D2R LGT16D5R LGT16HSR 4-12
U.S. PTENT NOS. 6,688,816 and 6,824,333 STRIGHT TOOLHOLDERS Designed for N, conventional and top slide position on Swiss screw machines. sizes 5/16", 3/8", 1/2", 5/8", 3/4", 1" and 1-1/4". Metric sizes also available. MDE U.S.. 3/4" GROOVE N TURN LGS34R B FE PRTG www.thinbit.com/qr7-3 Select the in the table below that represents your selection of shank dimensions. The for a.750" Right Hand square shank for inserts beginning with is: LGS34R Dimensions Includes, lamp and Hardware 7-3 Straight Use right with right hand inserts Use left with left hand inserts For Inserts Beginning '' 'B' '' With RIGHT LEFT HND HND.312".500" 4.840" LGS56R LGS56L.375".500" 4.840" LGS38R LGS38L.500".500" 4.840" LGS12R LGS12L.625".625" 4.840" LGS58R LGS58L.750".750" 4.840" LGS34R LGS34L 1.000" 1.000" 4.840" LGS01R LGS01L 1.250" 1.250" 4.840" LGS14R LGS14L 8mm.500" 4.840" LGS08RM LGS08LM 10mm.500" 4.840" LGS10RM LGS10LM 12mm.500" 4.840" LGS12RM LGS12LM 16mm.750" 4.840" LGS16RM LGS16LM 20mm 1.000" 4.840" LGS20RM LGS20LM 25mm 1.000" 4.840" LGS25RM LGS25LM lamp Screw Wrench Pin Right Hand: lamp X Left Hand: lamp Y S3808 W1005 P0206
U.S. PTENT NOS. 6,688,816 and 6,824,333 90º TOOLHOLDERS Designed for N and conventional machines. sizes 5/16", 3/8", 1/2", 5/8", 3/4", 1" and 1-1/4". Metric sizes also available. 3/4" GROOVE N TURN LGSF34R MDE U.S.. B FE PRTG www.thinbit.com/qr7-4 Select the in the table below that represents your selection of shank orientation and dimensions. The for a.750" right hand shank for inserts beginning with is: LGSF34R Dimensions Includes, lamp and Hardware For Inserts Beginning With 90º Use right with left hand inserts Use left with right hand inserts '' 'B' '' RIGHT LEFT lamp Screw Wrench Pin HND HND.312".500" 4.840" LGSF56R.375".500" 4.840" LGSF38R.500".500" 4.840" LGSF12R.625".625" 4.840" LGSF58R LGSF58L.750".750" 4.840" LGSF34R LGSF34L 1.000" 1.000" 4.840" LGSF01R LGSF01L 1.250" 1.250" 4.840" LGSF14R LGSF14L lamp S3808 W1005 P0312 8mm.500" 4.840" LGSF08RM 10mm.500" 4.840" LGSF10RM 12mm.500" 4.840" LGSF12RM 16mm.750" 4.840" LGSF16RM LGSF16LM 20mm 1.000" 4.840" LGSF20RM LGSF20LM 25mm 1.000" 4.840" LGSF25RM LGSF25LM GROOVE 'N TURN TOOLHOLDERS 7-4
U.S. PTENT NOS. 6,688,816 and 6,824,333 SWISS SREW MHE TOOLHOLDERS Designed for top slide position on Swiss screw machines. sizes 1/2", 12mm and 16mm in right hand orientation. B T H I N B I T 16MM RH L SERIES PRTG www.thinbit.com/qr7-5 Select the in the table below that represents your selection of shank orientation and dimensions. The for a.500" shank, right hand tool for inserts beginning with is: LSS12R Dimensions Includes, lamp and Hardware '' 'B' '' For Inserts Beginning With lamp Screw Wrench Pin Right Hand.500".500" LSS12R Use with right hand and centered inserts Left Hand Use with left hand and centered inserts 12mm 12mm 4.840" LSS12RM 16mm 16mm LSS16RM.500".500" LSS12L 12mm 12mm 4.840" LSS12LM 16mm 16mm LSS16LM lamp S3808 W1005 P0305 7-5
U.S. PTENT NOS. 6,688,816 and 6,824,333 ROUND REVERSIBLE TOOLHOLDERS Designed for boring bar positions on all machines. an be used with a boring head to trepan on a mill. may need to be shortened. Toolholder reversible by removing face and bottom screws and rotating head 1/2 turn. sizes 1/2", 5/8", 3/4" and 1". ll 1/2", 5/8" and 3/4" shanks are made from 1" shank. 1" 5.5" 5/8" REVERSIBLE ROE58 THBIT MDE U.S.. FE PRTG www.thinbit.com/qr7-7 Select the in the table below that represents your selection of shank dimensions. The for a.625" round shank for inserts beginning with is: LROE58 Dimensions Includes, Head, lamp and Hardware '' For Inserts Beginning With Head Only Includes lamp and Hardware For Inserts Beginning With Head Screws Head Wrenches lamp lamp Hardware.500" LROE12 RROE12 Right Hand or Left Hand Use as right hand with right hand inserts; Use as left hand with left hand inserts; Use as either hand with centered inserts..625" LROE58 RROE58 1 each: 1 each: LROEH S5806 W1006 S2810 W1009.750" LROE34 RROE34 lamp Screw: S3808 Wrench: W1005 1.000" LROE01 RROE01 7-7
U.S. PTENT NOS. 6,688,816 and 6,824,333 ROUND TERNL TOOLHOLDERS Designed for boring bar positions on all machines. Toolholder reversible for left and right hand orientation. sizes 1/2", 5/8", 3/4" and 1". ll 1/2", 5/8" and 3/4" shanks are made from 1" shank. 1" FE PRTG www.thinbit.com/qr7-8 Select the in the table below that represents your selection of shank orientation and dimensions. The for a.625" right hand shank for inserts beginning with is: LR5806 Right Hand or Left Hand Minimum Bore Diameter Dimensions '' '' Includes, lamp and Hardware For Inserts Beginning With without pin lamp Screw Wrench Pin.500" LR1206.625" 5.500" LR5806 ROUND TOOLHOLDERS Use as right hand with left hand inserts; Use as left hand with right hand inserts; Use as either hand with centered inserts. 1.250".750" LR3406 5.500" LR0106 1.000" 11.875" LR0112 lamp S3808 W1005 P0305 7-8