Document - Wideband Transformers Surface mount and through hole versions Vrms, minute interwinding isolation (hipot), / Watt RF input power ma current rating. For a smaller package size, see our WBC Series Core material Ferrite Terminations RoHS compliant matte tin over nickel over phos bronze. Other terminations available at additional cost. Weight.8. g Ambient temperature C to +8 C Storage temperature Component: C to +8 C. Tape and reel or tube packaging: C to +8 C Resistance to soldering heat Max three second reflows at + C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) (unlimited floor life at < C / 8% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) per billion hours /,,7 hours, calculated per Telcordia SR- Packaging (SM version): per reel; Plastic tape: mm wide,. mm thick, mm pocket spacing,. mm pocket depth; (TH version): 7 per tube PCB washing Tested to MIL-STD- Method plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Dimensions surface mount parts Dimensions through hole parts pin # WBxxxx XXXX Y Part number Internal code pin # WBxxxx XXXX Y Part number Internal code Parts manufactured prior to August may be marked differently... 8,.8 8,.8 7, 7, pin.,7.,7.,.,.,. /,.,. ±., ±,.,., min..,, 9 -. ±. 7, ±, Dimensions are in inches mm.79,.,7.,.9, Recommended Land Pattern.,., Dimensions are in inches mm.,.,. 7,. dia, Recommended Board Layout +-87-9- sales@coilcraft.com +--79 sales@coilcraft-europe.com Taiwan +88-- sales@coilcraft.com.tw China +8--8 87 sales@coilcraft.com.cn Singapore + -8 8 sales@coilcraft.com.sg Document - Revised 8//7 Coilcraft Inc. 8
Document - Wideband Transformers Impedance Insertion (pins ) (pins ) DC Part number ratio Bandwidth loss L min DCR L min DCR imbalance Schematic SM TH pri : sec (MHz) (db) (µh) (mohm) (µh) (mohm) (ma) WB-SL_ WB-L :..7 7 7 7 7 WB-SL_ WB-L :.. WB.8-SL_ WB.8-L :.8.. 9 8 WB.-SL_ WB.-L :... 8 WB--WSL_ WB--WL :.8 7. 8 7 WB.-SL_ WB.-L :..8. 7 WB-SL_ WB-L :.. WB9-SL_ WB9-L : 9..7 WB-SL_ WB-L :.. 7 89 WB-SL_ WB-L :.. 9 8 WB-TSL_ WB-TL :. 7. WB-TSL_ WB-TL :.. 7 7 8 WB-TSL_ WB-TL :.7. 8 7 9 WB.-TSL_ WB.-TL :...8 WB-TSL_ WB-TL :.. 9 7. WB-HSL_ WB-HL :.. WB-TSL_ WB-TL :.. 7. WB-TSL_ WB-TL :.. 8 WB8-TSL_ WB8-TL : 8..7 8 7 7 WB-TSL_ WB-TL :..7 7 9 WB-TSL_ WB-TL :.. 7 89 WBT-SL_ WBT-L :.. 7 7 9 WBT.-SL_ WBT.-L :... 8 7 8 9 WBT.-SL_ WBT.-L :... 7 7 WBT-SL_ WBT-L :.. WBT-ASL_ WBT-AL :.. 9 8. WBT-SL_ WBT-L :.. 7. WBT-SL_ WBT-L :.... When ordering, please specify packaging code: WB-SLD Packaging: D = machine-ready reel. EIA-8 embossed plastic tape ( parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($ charge), use code letter D instead.. Impedance ratio is for the full primary winding to the full secondary winding.. Inductance measured at khz,. V, Adc on an Agilent/HP 9 or equivalent.. DCR measured on a micro-ohmmeter.. DC imbalance is the imum difference in current measured at pins and with the source at pin. Inductance drop is % at imbalance.. Electrical specifications at C. Measurements are referenced to Ohms. Refer to Doc Soldering Surface Mount Components before soldering. +-87-9- sales@coilcraft.com +--79 sales@coilcraft-europe.com Taiwan +88-- sales@coilcraft.com.tw China +8--8 87 sales@coilcraft.com.cn Singapore + -8 8 sales@coilcraft.com.sg Document - Revised 8//7 Coilcraft Inc. 8
Document - Transformers with no center taps WB- db bandwidth:. MHz.. WB.- db bandwidth:.8 MHz.. WB- db bandwidth:. MHz.. WB- db bandwidth:. MHz.. WB.8- db bandwidth:. MHz.. WB9- db bandwidth:. MHz.. WB.- db bandwidth:. MHz.. WB- db bandwidth:. MHz.. WB--W db bandwidth:.8 7 MHz.. WB- db bandwidth:. MHz.. Attenuation measured on a network analyzer (re: Ohms) +-87-9- sales@coilcraft.com +--79 sales@coilcraft-europe.com Taiwan +88-- sales@coilcraft.com.tw China +8--8 87 sales@coilcraft.com.cn Singapore + -8 8 sales@coilcraft.com.sg Document - Revised 8//7 Coilcraft Inc. 8
Document - Transformers with secondary center tap WB-T db bandwidth:. 7 MHz.. WB-T db bandwidth:. MHz.. WB-T db bandwidth:. MHz.. WB-T db bandwidth:. MHz.. WB-T db bandwidth:.7 MHz.. WB8-T db bandwidth:. MHz.. WB.-T db bandwidth:. MHz.. WB-T db bandwidth:. MHz.. WB-T db bandwidth:. MHz.. WB-T db bandwidth:. MHz.. WB-H db bandwidth:. MHz.. Attenuation measured on a network analyzer (re: Ohms) +-87-9- sales@coilcraft.com +--79 sales@coilcraft-europe.com Taiwan +88-- sales@coilcraft.com.tw China +8--8 87 sales@coilcraft.com.cn Singapore + -8 8 sales@coilcraft.com.sg Document - Revised 8//7 Coilcraft Inc. 8
Document - Transformers with primary and secondary center taps WBT- db bandwidth:. MHz.. WBT-A db bandwidth:. MHz.. WBT.- db bandwidth:. MHz.. WBT- db bandwidth:. MHz.. WBT.- db bandwidth:. MHz.. WBT- db bandwidth:. MHz.. WBT- db bandwidth:. MHz.. Attenuation measured on a network analyzer (re: Ohms) +-87-9- sales@coilcraft.com +--79 sales@coilcraft-europe.com Taiwan +88-- sales@coilcraft.com.tw China +8--8 87 sales@coilcraft.com.cn Singapore + -8 8 sales@coilcraft.com.sg Document - Revised 8//7 Coilcraft Inc. 8