v.117 HMC3LPE Typical Applications Features The HMC3LPE is ideal for: Millimeterwave Point-to-Point Radios LMDS VSAT SATCOM Functional Diagram Low Noise Figure:. db High Gain: db Single Positive Supply: +3V or +5V DC Blocked RF I/Os No External Matching Lead xmm QFN Package: 1mm² General Description The HMC3LPE is a GaAs MMIC Low Noise Amplifier (LNA) which covers the frequency range of to 3 GHz and is housed in a leadless plastic SMT package. The HMC3LPE utilizes a GaAs PHEMT process offering db gain from a single bias supply of + 3V @ 5 ma with a noise figure of. db. The HMC3LPE may be used in conjunction with HMCLC3B or HMC5LM3 mixers to realize a millimeterwave system receiver. The RF I/Os are DC blocked and matched to 5 Ohms requiring no external components. Electrical Specifications, T A = +5 C, Vdd = +3V Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units Frequency Range - 7 7-3 3-3 GHz Gain 19 1 7 17 19 3 15 17 db Gain Variation Over Temperature.3.3.3 db/ C Noise Figure. 3.. 3..5. db Input Return Loss 1 9 11 db Output Return Loss 1 9 9 db Output Power for 1 db Compression (P1dB) 9 dbm Saturated Output Power (Psat) 9 11 1 dbm Output Third Order Intercept (IP3) 1 dbm Supply Current (Idd) (@ Vdd = +3V) 5 77 5 77 5 77 ma 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: 71-39-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D
v.117 Gain vs. Temperature @ Vdd = +3V Gain vs. Temperature @ Vdd = +5V GAIN (db) 1 1 Input Return Loss @ Vdd = +3V -1 GAIN (db) Input Return Loss @ Vdd = +5V 1 1-1 - - Output Return Loss @ Vdd = +3V Output Return Loss @ Vdd = +5V -1-1 - - For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: 71-39-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D
v.117 Noise Figure vs. Temperature @ Vdd = +3V Noise Figure vs. Temperature @ Vdd = +5V NF (db) Isolation @ Vdd = +3V ISOLATION (db) - - - NF (db) Isolation @ Vdd = +5V ISOLATION (db) - - - - - Output P1dB @ Vdd = +3V Output P1dB @ Vdd = +5V 1 1 1 1 P1dB (dbm) P1dB (dbm) 3 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: 71-39-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D
v.117 Psat @ Vdd = +3V Psat @ Vdd = +5V Psat (dbm) Output IP3 @ Vdd = +3V Output IP3 @ Vdd = +5V IP3 (dbm) 1 1 5 15 1 Psat (dbm) IP3 (dbm) 1 1 5 15 1 5 5 Additive Phase Noise Vs Offset Frequency, RF Frequency = 3 GHz, RF Input Power = - dbm (P1dB) PHASE NOISE (dbc/hz) -7 - -9-1 -11-1 -13-1 -1-17 1 1K 1K 1K 1M OFFSET FREQUENCY (Hz) For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: 71-39-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D
v.117 Absolute Maximum Ratings Drain Bias Voltage (Vdd1, Vdd) +5.5 Vdc RF Input Power (RFIN)(Vdd = +3 Vdc) Outline Drawing dbm Channel Temperature 175 C Continuous Pdiss (T = 5 C) (derate 7.7 mw/ C above 5 C) Thermal Resistance (channel to ground paddle).7 W 13 C/W Storage Temperature to +15 C Operating Temperature - to +5 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS PIN 1 INDICATOR.1. SQ 3.9.5 BSC.3.5. 19 EXPOSED PAD 1 DETAIL A (JEDEC 95) PIN 1 INDICATOR AREA OPTIONS (SEE DETAIL A).5.7 SQ.55 PKG-9/PKG-9.9.5. SEATING PLANE TOP VIEW.5..3.5 MAX. NOM COPLANARITY.. REF BOTTOM VIEW COMPLIANT TO JEDEC STANDARDS MO--VGGD-. 13 1 7. MIN FOR PROPER CONNECTION OF THE EXPOSED PAD, REFER TO THE PIN CONFIGURATION AND FUNCTION DESCRIPTIONS SECTION OF THIS DATA SHEET. 5-1-B -Lead Lead Frame Chip Scale Package [LFCSP] mm mm Body and.5 mm Package Height (CP--1) Dimensions shown in millimeters. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [1] [] H3 HMC3LPE RoHS-compliant Low Stress Injection Molded Plastic 1% matte Sn MSL3 XXXX [1] -Digit lot number XXXX [] Max peak reflow temperature of C 5 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: 71-39-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D
v.117 Pin Description Pin Number Function Description Interface Schematic 1,, - 7, 1-15, 17-19, GND 3 RFIN Package bottom has exposed metal paddle that must be connected to RF/DC ground. This pin is AC coupled and matched to 5 Ohm. - 11, 1, 3 N/C Not connected. 1 RFOUT, Vdd1, Vdd Application Circuit This pin is AC coupled and matched to 5 Ohm. Power supply for the -stage amplifier. See application circuit for required external components. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: 71-39-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D
v.117 Evaluation PCB List of Materials for Evaluation PCB 1395 [1] Item Description J1, J PCB Mount K Connector J3 - J5 DC Pin C1, C 1 pf Capacitor, Pkg. C3, C 1 nf Capacitor, 3 Pkg. C5, C.7 µf Capacitor, Tantalum U1 PCB [] HMC3LPE 1393 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [] Circuit Board Material: Rogers 35 or Arlon 5 FR The circuit board used in the application should use RF circuit design techniques. Signal lines should have 5 Ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Analog Devices, upon request. 7 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: 71-39-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D