Daloc S23 (Y23) Security Door RC3 Reference Clear opening dimensions Outer dimensions frame Weight Single door S23 9 x 21 S23 10 x 21 S23 11 x 21 Double door S23 15 x 21 S23 18 x 21 800 x 2025 900 x 2025 1000 x 2025 1400 x 2025 1700 x 2025 890 x 2093 990 x 2093 1090 x 2093 1490 x 2093 1790 x 2093 70 80 85 115 135 Other module sizes and special sizes are available on request. *At 90 degree opening door loss 35 mm from the clear opening. Daloc S 23 is primarily intended as an inward opening entry door for apartments where a burr door s appearance is required. The door can be used to advantage as an inner door inside older interior hall doors that are to be retained for some reason. A fire and sound rated alternative to wroughtiron gates. CLASSIFICATIONS The door type is tested by RISE Research Institutes of Sweden AB and certified by RISE Certifiering and SBSC Svensk Brandoch Säkerhetscertifiering AB. It is manufactured under the control of RISE and SBSC. Fire rating: El30, option A60. I BBR anges att det är generellt godtaget att använda A-klass som alternativ till EI-klass EI60. Sound reduction: Rw 37, 38 db. Burglar resistance class: EN 1627 RC3. The door is approved for inward opening installation i.e. rabbet side = attack side Fire gas seal: Option EN 13501-2 klass S a och S 200. EMI protection: Option EMIB, EMI-C. Contact Daloc for extra equipment for doors with protection for EMI. Corrosion class: C1-C3 according to EN ISO 12944-2 Doors for external use up to corrosion class C3 are recommended galvanized and ready painted from the factory with stainless steel threshold or in laminated steel panel with stainless steel threshold. CE marking: SS-EN 14351-1. CE-marked in accordance with the Building Products Directive and product standard for external doors EN 14351-1.
DOOR LEAF Design: The door leaf is 47 mm thick, has a thick rolled seam edge, and consists of steel panels folded with concealed edge profiles at the door leaf edge. Bonded and riveted. Material: 1 mm steel panels and mineral wool insulation. Surface treatment:the door leaf is supplied pre-painted in one of our standard colours from factory or with wood patterned laminated steel panel from the standard range. Other NCS colours or wood patterns are available on request. Doors for external use up to corrosion class C3 are recommended galvanized and pre-painted from the factory with stainless steel threshold or in laminated steel panel with stainless steel threshold. FRAME Design: The door is supplied as standard with white painted frame type 42. The frame is supplied assembled, with no loose parts. The seal is placed in a groove in the frame. Several different types of frame are available: with architrave on the opening face (type 41), architrave on both sides (type 44-49) or without architrave (type 42). Insulation: Supplied insulated with mineral wool from the factory Installation:Quick installation and fixing through the frame s adjustable frame screws (Hexagonal key). THRESHOLD S23 is supplied as standard with hardwood threshold (fire rating EI30). Bevelled threshold (ATE) is standard but can be replaced by a straight threshold (ATEH) if desired. It can be ordered with galvanised threshold bar (ATZ), threshold plate (TPZ) combined with drop strip (sound reduction 38dB in single door version) or threshold plate with brush strip or drop seal threshold (not tested for sound reduction). STANDARD FITTINGS Multi point lock (510) excl. cylinder. Note! S23 requires a cylinder conforming to SS 3522 class 3 or an oval cylinder with approved cylinder fittings, A=47 mm, B=21 mm from opening face to centre of lock case. Galvanised fixed pin hinges. Security bolt in striking plate and three dog bolts in rear edge as well as drill protection in the main lock. OPTIONAL COMPONENTS Can be supplied with Daloc Linea pattern, letter box, door viewer, mechanical bell, key cylinder, kick plate, door closer etc. When positioning in a location exposed to wind, a door brake is recom-mended. For inwards opening doors that are exposed to rain, a water deflector at the lower edge is recommended. DOUBLE LEAF DOORS The door leaves and frame are manufactured in the same way as the single leaf door. The inactive leaf has an astragal strip and is fitted as standard with recessed leading edge.
DETAIL SKETCHES
PICTURES Security door S 23 has a multi point lock where the main lock is supplemented by hooks above and below. Dog bolt in the rear edge. Frame screws facilitate fast and secure installation.