CO2 Laser Cutting System WTS4112 FALCON-S (May 2010)
Outline of Laser Cutting Machine Full Closed Cover Type Work Table Cutting Head Operation Panel Laser Resonator ( built-in ) NC Control Unit ( built-in ) Remaining Material Pan
Efficient Operator-friendly Laser Cutting Machine Compact Footprint Only 5.71m 22!! This machine doesn t take up a much space. Advantages 1. Able to reduce investment in ground and building at building new factories for laser cutting system. 2. Allows more space to be used by replacing existing bigger machine. 3. Space for peripheral equipment such as chiller, compressor and dust collector can be secured easily.
Efficient Operator-friendly Laser Cutting Machine Advantages of of BEAM FLYING Method Advantages 1. HIGH SPEED and ACCURACY for light weight drive section. 2. Workpieces DON T shift because of the fixed work table. 3. The work table is fixed so that machine size is very COMPACT.
Environmental Aware Operator-friendly Laser Cutting Machine High Performance Dust Collection Fume Dust Free Structure for Clean Work Environment Work Table Exhaust System Exhaust Duct
Shibuya Original Laser (Model:SOL13H) Medium Speed Spiral Flow Laser Resonator Medium speed gas flow results in 1)More compact design than fast axial flow lasers 2)Higher beam quality than slow axial flow lasers Medium speed gas flow reduces 1)Load on the blower (longer than other lasers) 2)Deposits on the electrodes 3)Deposits on internal mirror Medium speed gas flow results in Dramatically longer life of mirror (8000Hrs.)
Shibuya Original Laser (Model:SOL13H) Multi-Path Type Resonator Very High Quality Beam Smaller Consumption of Electricity Long Resonant Length (as long as 14m) The 5inch lens can be used with a wider variety of materials and thicknesses.
Shibuya Original Laser (Model:SOL13H) Maximum Material Thickness Mild Steel(O2) Stainless Steel(N2) Aluminum(Air) Arclylic(Air) 0 5 10 15 20 Thickness (mm) These data figures may vary depending on material conditions etc.
Operator-friendly Laser Cutting Machine Crash-Protection Torch The cutting head swings to prevent damage. No Damage Crash
Operator-friendly Laser Cutting Machine Crash-Protection Torch The highly responsive damage sensor and crash protection torch prevents costly damage and down time. Re-alignment of torch is not required after torch crashes
Operator-friendly Laser Cutting Machine Workpiece Positioning Mechanism (( Clamping and Locating )) Origin position can be set easily by the positioning pin ( X-axis ) and the clamp. Air clamp is the standard equipment.
Operator-friendly Laser Cutting Machine Even large workpieces can be be loaded and positioned without trouble. The transfer ball device on the work lifter enables a single operator to load large workpieces. The work lifter turns over during cutting operation so that fumes and dust don t get in the gap between the free bearings. The bearings rotate to the reference side so that workpieces are not shifted. Easy operation by foot pedal.
Operator-friendly Laser Cutting Machine Support Plate Quick release for its insertion mechanism Cutting program is registered in NC so that customers can manufacture the support plate themselves. Micro-Jointless-Cutting can be made for cutting products over the pitch of support plate.
Operator-friendly Laser Cutting Machine Remaining Waste Tray Remaining material can be taken out easily by two remaining waste trays on the side of the work table. Remaining materials are not spattered so that the work environment is clean.
Efficient High performance CNC (Model:21i-MB) Features The operation panel can be stored, which makes effective use of work space. Full of Shibuya s own technical know-how ( Up to 8 kinds of materials, 12 different thickness and 10 different parameters for microfabrication to high-speed cutting ) The followings are the standard functions. - Maintenance cycle monitoring for consumable parts such as filter, oil..etc. - Self trouble diagnosis program - Troubleshooting display External operation box is equipped as standard equipment. 10.4 inch color LCD display ( with softkey ) USB memory for program installation
CO2 Laser Cutting System WTS4112/SOL13H Standard Equipment Chiller Chiller (air dryer included) Rotary Work-Lifter (Japanese Patent) CG (capacitive gap) Sensor Air Purge for External Beam Path
CO2 Laser Cutting System WTS4112/SOL13H Options Auto Focus Touch Sensor Deionizer Compressor Dust Collector Exhaust Fan CAD/CAM Software CAS6000 Rotary Table LAN Connection
Specifications : WTS4112/SOL13H Model Processing area Max. loading weight Cutting speed Rapid traverse speed (X,Y) Rapid traverse speed (Z) Z-axis travel range Controlled axes Simultaneous controllable axes Axes drive Minimal unit of NC input Laser resonator model Input power requirement 1 Dimensions 2 Machine weight 1 WTS4112/SOL13H 1250 1250mm 140kg 0~12m/min 30m/min/Axis 8m/min 90mm 3(X,Y,Z) 2(X,Y) AC servo motors 0.001mm SOL13H (1300W) 3ph 200V 50/60Hz 47.2kVA 2450(L) 2330(W) 1670(H)mm 5000kg 1 Includes standard accessories such as laser resonator, chiller, etc. 2 Includes laser resonator. Chiller not included.