Ordering number : EN8A ACH Bipolar Transistor V,.A, Low VCE(sat) PNP Single CPH http://onsemi.com Applications Low-frequency Amplifier, high-speed switching, small motor drive Features Large current capacitance Low collector-to-emitter saturation voltage (resistance) RCE (sat) typ.=8mω [IC=.A, IB=mA] Small ON-resistance (Ron) Specifications Absolute Maximum Ratings at Ta= C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO -- V Collector-to-Emitter Voltage VCEO -- V Emitter-to-Base Voltage VEBO -- V Collector Current IC -- ma Collector Current (Pulse) ICP --1.4 A Collector Dissipation PC Mounted on a ceramic board (6mm.8mm) mw Junction Temperature Tj 1 C Storage Temperature Tstg -- to +1 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions unit : mm (typ) 1A-.8.6 1.6.6.9..9 1.9.4.1.. 1 : Base : Emitter : Collector CPH ACH-TL-E Product & Package Information Package : CPH JEITA, JEDEC : SC-9, TO-6, SOT- Minimum Packing Quantity :, pcs./reel Packing Type: TL Electrical Connection 1 TL Marking AL LOT No. Semiconductor Components Industries, LLC, 1 August, 1 61 TKIM/O TSIM TA-114 No.8-1/6
ACH Electrical Characteristics at Ta= C Parameter Symbol Conditions Ratings min typ max Unit Collector Cutoff Current ICBO VCB= --V, IE=A --1 na Emitter Cutoff Current IEBO VEB= --4V, IC=A --1 na DC Current Gain hfe VCE= --V, IC= --1mA Gain-Bandwidth Product ft VCE= --1V, IC= --ma MHz Output Capacitance Cob VCB= --1V, f=1mhz 4. pf Collector-to-Emitter Saturation Voltage VCE(sat) IC= --ma, IB= --1mA --11 -- mv Base-to-Emitter Saturation Voltage VBE(sat) IC= --ma, IB= --1mA --.9 --1. V Collector-to-Base Breakdown Voltage V(BR)CBO IC= --1μA, IE=A -- V Collector-to-Emitter Breakdown Voltage V(BR)CEO IC= --1mA, RBE= -- V Emitter-to-Base Breakdown Voltage V(BR)EBO IE= --1μA, IC=A -- V Turn-On Time ton ns Storage Time tstg See specified Test Circuit. 1 ns Fall Time tf ns Switching Time Test Circuit PW=μs D.C. 1% IB1 IB OUTPUT INPUT VR RB RL Ω + + μf 4μF VBE=V VCC= --1V IC=IB1= --IB= --ma Ordering Information Device Package Shipping memo ACH-TL-E CPH,pcs./reel Pb Free -- --6 -- --4 -- -- --ma --4mA IC -- VCE --ma --ma --ma --1mA --1mA --ma --ma --ma --ma --1mA --μa --8 -- --6 -- --4 -- -- IC -- VBE Ta= C C -- C V CE = --V --1 --1 I B = --1 -- -- --4 -- --6 -- --8 --9 --1 Collector-to-Emitter Voltage, V CE -- mv IT49 --. --.4 --.6 --.8 --1. --1. Base-to-Emitter Voltage, V BE -- V IT No.8-/6
ACH DC Current Gain, h FE 1 1 Ta= C C -- C hfe -- IC V CE = --V Collector-to-Emitter Saturation Voltage, V CE (sat) -- mv --1 --1 VCE(sat) -- IC Ta= C C -- C I C / I B = Collector-to-Emitter Saturation Voltage, V CE (sat) -- mv --1 --1 --1. --1 --1 --1 VCE(sat) -- IC Ta= C C -- C IT1 VBE(sat) -- IC --1 I C / I B = I C / I B = Base-to-Emitter Saturation Voltage, V BE (sat) -- V --1 --1. --1. --1 --1 --1 IT4 C Ta= -- C C --1 --1. --1 --1 --1 IT 1 Cob -- VCB f=1mhz --.1 --1. --1 --1 --1 IT6 1 ft -- IC VCE= --1V -- pf Output Capacitance, Cob Gain-Bandwidth Product, f T -- MHz ON Resistance, Ron -- Ω.1 --1. 1 1 1. f=1mhz --1 Collector-to-Base Voltage, V CB -- V IT Ron -- IB 1kΩ IN 1kΩ I B OUT Collector Dissipation, P C -- mw 1 --1. 8 6 4 1 --1 --1 --1 IT PC -- Ta Mounted on a ceramic board(6mm.8mm).1 --.1 --1. --1 Base Current, I B -- ma IT64 4 6 8 1 1 14 16 Ambient Temperature, Ta -- C IT4 No.8-/6
ACH Embossed Taping Specification ACH-TL-E No.8-4/6
ACH Outline Drawing ACH-TL-E Land Pattern Example Mass (g) Unit.1 * For reference mm Unit: mm.6.4 1.4.9.9 No.8-/6
ACH ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.8-6/6