Worksurfaces & Supports

SIN 711-1/2 Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS Worksurfaces & Supports Edge Option Edgeband (E) Finished with clean and crisp edges with 1 8" radius edge corners. Edgeband countertops are 15½" deep. Special notes Meets or exceeds applicable ANSI/BIFMA standards. Pre-drilled pilot holes for bracket attachment ensure precision alignment. Corner worksurface with directional laminate will have diagonal grain orientation. REFERENCE EMERGE PREFIX SMARTSPACE WORKSURFACES STORAGE SURPASS PREPARE ACCESSORIES SEATING INDEX Prices effective as of January 1, 2018. Information in this pricebook is accurate as of January 1, 2018. The pricebook is updated monthly. Go to www. MaxonEdge.com to find the most current pricing information in the electronic pricebook. Information is updated monthly in CAD and GIZA. Maxon recommends updating 20-20 Technologies software every month. 117

Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS SIN 711-1/2 INDEX SEATING ACCESSORIES STORAGE PREPARE SURPASS SMARTSPACE WORKSURFACES PREFIX EMERGE REFERENCE Worksurface Support Kits Worksurface Support Kits are used to support worksurfaces in a panel environment. Worksurface Support Kits MUST be ordered separately from worksurface components. To simplify this process, new hardware kits have been created for each worksurface type to take the guess work out of ordering mounting components. Please refer to the examples below for how to specify Worksurface Support Kits. Reference pages 138-141 for what components are included in each kit. Using Worksurface Support Kits vs A-la-Carte Worksurface Support Specification: Worksurface supports can either be ordered as a complete kit (see preceding Worksurface Support Kits Chart to determine correct Kit Model #), or can be specified as separate components to customize individual workstations. R2 R3 R3 Kit (M-UWSKR3) This kit comes with the following models: (1) M-C1L, Left Hand Cantilever (2) MC1R, Right Hand Cantilever (1) M-DAB1, Worksurface Attaching Bracket R2 Kit (M-UWSKR2) This kit comes with the following models: (1) M-C1L, Left Hand Cantilever (1) MC1R, Right Hand Cantilever (1) M-DAB1, Worksurface Attaching Bracket 36TC 50L 50X36T 50E C1L 36TC 50X36T IC 24x72 C1R 36TC 50X36T C1R 50L 50X36T 50E 36TC 118

SIN 711-1/2 Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS REFERENCE EMERGE PREFIX SMARTSPACE WORKSURFACES STORAGE SURPASS PREPARE ACCESSORIES SEATING INDEX 119

Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS SIN 711-1/2 INDEX SEATING ACCESSORIES STORAGE PREPARE SURPASS SMARTSPACE WORKSURFACES PREFIX EMERGE REFERENCE Worksurfaces are 1.184" thick with particle board core and with top surfaces finished in high-pressure laminate (HPL). Bottom surfaces are covered with a backer sheet. Worksurfaces can be panel hung or used in freestanding applications. Worksurfaces Optional wider width primary worksurfaces are available for use with Emerge and Prefix panel runs having a T or S connection upcharge applies. Rectangular worksurfaces over 36"W and corner coves have two grommets. 42"W and under rectangular worksurfaces and peninsulas have one grommet. Supports Worksurfaces can be configured at 29 1 2"H with end panel supports and in line support panels, or at various heights on 1" increments using specific product configurations. Worksurface support options include: End-panel supports In line support legs Support columns Cantilever brackets Worksurface bracket kits Flat brackets Freestanding pedestals Pedestal-to-panel attachment kit Desk-to-panel attachment kit Corner desk leg Support Guidelines for PREFIX Unsupported worksurface runs greater than 72" require floor support for improved stability. Worksurface bracket kit should be used to tie panels to worksurface for added stability. A panel run without a return needs a floor support. Unsupported HPL worksurface spans of 60"W-84"W require an external worksurface support channel. It is recommended for HPL spans 48"W-59"W. Modesty panels and appropriate supports are required to configure freestanding SURPASS desks. Maximum unsupported return panel width is 60". 2 1 4" Bridge and return kits Modesty panels Gussets Support Guidelines for EMERGE Unsupported worksurface runs greater than 72" require floor support for improved stability. Worksurface bracket kit should be used to tie panels to worksurface for added stability. A panel run without a return needs a floor support. Unsupported HPL worksurface spans of 60"W-84"W require an external worksurface support channel. It is recommended for HPL spans 48"W-59"W. Modesty panels and appropriate supports are required to configure freestanding SURPASS desks. Maximum unsupported return panel width is 72". 120

SIN 711-1/2 Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS Worksurface Specifications Worksurfaces use 1.184" thick high-density particleboard. Top surfaces are high pressure laminate and the undersides have a moisture-resistant backing to prevent warping. Total thickness 1 3/16". Worksurfaces are available in Edgeband edge treatments (with a squared edge). Worksurfaces include 3 1/2" x 2" oval grommets with caps. Supports and modesty panels attached with wood screws. Meets or exceeds all ANSI-BIFMA standards. List price shown applies to laminates listed on the Maxon L1 and L2 laminate grades. Grommets location 6.36" from each side on 48" wide and greater worksurfaces. Primary Worksurfaces Primary worksurfaces are available in 20", 24", and 30" depths up to 90"W. Nominal worksurface width is equal to nominal panel width. Worksurfaces 60"+ require a cantilever bracket for center support in panel mounted applications. Specify 20" cantilever on 20"D and 24"D, and 24" cantilever on 30"D worksurfaces. Primary worksurfaces can be used with a modesty panel and appropriate supports to configure freestanding desk(s). Refer to Working With SURPASS. Transitional Worksurfaces Worksurfaces 60"+ require a 24" cantilever bracket for center support in panel mounted applications. External support channel can also be used. Corner Worksurfaces HPL corner worksurfaces with woodgrain laminate have grain direction diagonal to adjacent worksurfaces. 120 Corner Worksurfaces Standard with one wire management grommet in corner location. One corner bracket. L-Return Worksurfaces Can be used with a modesty panel and appropriate supports to configure freestanding desk(s). Refer to SURPASS. Worksurfaces 60"+ require a cantilever bracket for center support in panel mounted applications. Specify 20" cantilever on 24"D, and 24" cantilever on 30"D worksurfaces. External support channel can also be used. REFERENCE EMERGE PREFIX SMARTSPACE WORKSURFACES STORAGE SURPASS PREPARE ACCESSORIES SEATING INDEX 121

Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS SIN 711-1/2 INDEX SEATING ACCESSORIES STORAGE PREPARE SURPASS SMARTSPACE WORKSURFACES PREFIX EMERGE REFERENCE Worksurface Supports End Supports and Bracket Kits Levelers provide 1 1 2" vertical adjustment. Must be connected into panel slots for panel hung applications. Straight worksurfaces adjacent to 120 connections must be supported by full end-panels. 12"D end-panel models for use with D-shaped worksurfaces or curvilinear shaped worksurfaces in freestanding applications. Panel mounted end panel supports are ordered for right or left handed application. Support Legs and Bracket Kit Supports the junction of two worksurfaces. Non-handed for use at either end of worksurface. Provided with flat bracket. Worksurface in line support legs are used to support large worksurfaces both in a shared position or as middle support when used in conjunction with worksurface bracket. Levelers provide 1 1 2" vertical adjustment. Support Columns Used to support one end of curvilinear worksurfaces. All peninsula worksurfaces require sup port columns (ordered separately). column, worksurface bracket kit, attaching hardware, and adjustable glides. Cantilever Brackets handed Cantilever brackets are left or right handed. No assembly required. They can be inserted into panel reveals in 1" vertical increments. One size is used for both 24" and 30"D worksurfaces. 20"D cantilever are for use with 20"D worksurfaces and to support 24"D worksurfaces 60"+ that require a cantilever bracket for center support in panel mounted applications. Both left and right brackets are required in shared applications. EMERGE with runs 84" or less avoid installation on only one side of a straight connection except to support corner worksurfaces. Floor support is required for runs greater than 84". PREFIX with runs 72" or less avoid installation on only one side of a straight connection except to support corner worksurfaces. Floor support is required for runs greater than 72". Cantilevers can and should still be used in the middle of a worksurface run 72"W or less for proper support and to help prevent worksurface bowing. DO NOT position at the end of a panel run. DO NOT use to support worksurfaces from which a peninsula worksurface is attached. DO NOT use cantilever brackets to support worksurfaces supported with permanent-wall hanger kit. External Support Channel Is required on a systems worksurface for additional support for spans greater than 60". Width of worksurface span can be reduced by using support storage. Extends 1 1 2" below the worksurface. When using 28"H mobile pedestals the length of support channel needs to be reduced to accommodate width of the pedestal. Support channel may interfere with mounting of some CPU holders and keyboard supports. Sitting Height Universal Post Leg Used to support one end of curvilinear worksurfaces. All peninsula worksurfaces require sup port columns (ordered separately). Can be used to support a freestanding desk. Standing Height Universal Post Leg Used to support one end of curvilinear worksurfaces. All peninsula worksurfaces require sup port columns (ordered separately). Can be used when the other side of the surface is attached to a panel. 122 *Paints and upcharges associated with each are now outlined in the front of the pricebook. A guide on "How to Specify" product has also been added to the beginning.

SIN 711-1/2 Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS Using Cantilevers on PREFIX Worksurface runs greater than 72" require floor support. Example: support pedestal or support leg. When the panel width matches the worksurface depth, worksurface brackets should be used at the end of runs. Cantilevers can and should still be used in the middle of a worksurface run 72" or less for proper support and to help prevent worksurface bowing. See examples below. Example A: Cantilevers are allowed because worksurface is not greater than 72"W. 50L 50X42T C1L 50E 50X48T Cantilever Brackets 30x48 C1R 50L 50X42T 50E 30"D x 48"W Worksurface and 42"W Return Panels Example C: Cantilevers are used at both ends of 84" run. Support leg is used at center of run. Example D: Worksurface bracket kits are used at the end of runs where panel widths match worksurface depths. Cantilevers are used where worksurface depth does not match panel width and for center support on worksurface runs that are not greater than 72"W. For worksurface runs greater than 72"W floor support is required. 50L 50X30T 50L 50X42T CWB2 50E C1L 50E Example B: Cantilevers are allowed because worksurface run is not greater than 72"W. 50L 50X42T C1L 50E 50X48T 50X42T 30x66 50X36T IC SL 30"D Worksurfaces and 30"W Return Panels C1R 30x72 IC SL 30x84 IC 50X48T FB30 C1L C1R 30x72 50E 50X36T 50X42T CWB2 50X30T C1R 30"D x 72"W Worksurface and 42"W Return Panels Support Leg Cantilever Bracket 30"D Worksurface and 42"W Return Panels Support Leg Worksurface Bracket Kit Cantilever Brackets Flat Bracket Cantilever Bracket Cantilever Brackets Worksurface Bracket Kit C1R IC 50L 50X42T 50E 50L 50X42T 50E 50L 50X36T 50X36T 50L REFERENCE EMERGE PREFIX SMARTSPACE WORKSURFACES STORAGE SURPASS PREPARE ACCESSORIES SEATING INDEX 123

Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS SIN 711-1/2 INDEX SEATING ACCESSORIES STORAGE PREPARE SURPASS SMARTSPACE WORKSURFACES PREFIX EMERGE REFERENCE Rectangular Worksurface: Edgeband Rectangular Worksurface. Grain direction runs along width (directional laminates only). Worksurfaces 54" or above require middle support unless specified with an external support channel. Any worksurface spanning longer than 72 requires floor support. Grommets are located 6.36" from outer edges 48" and greater. Add suffix "N" to a model number for no grommets, no upcharge. Example: M-URW2448N W D Description Model D W Wt. Cubes L1 List L2 List With Grommets Rectangular Worksurface, 20"D M-URW2024 20" 24" 21 1.6 289 311 M-URW2030 20" 30" 25 1.9 314 342 M-URW2036 20" 36" 31 2.2 328 360 M-URW2042 20" 42" 43 2.6 351 389 M-URW2048 20" 48" 45 2.9 375 419 M-URW2054 20" 54" 47 3.2 400 450 M-URW2060 20" 60" 52 3.6 425 480 M-URW2066 20" 66" 67 3.9 446 506 M-URW2072 20" 72" 74 4.2 466 531 M-URW2078 20" 78" 80 4.6 489 559 M-URW2084 20" 84" 87 4.9 566 642 M-URW2090 20" 90" 93 5.9 610 692 Rectangular Worksurface, 24"D M-URW2424 24" 24" 22 1.9 316 338 M-URW2430 24" 30" 26 1.9 332 360 M-URW2436 24" 36" 32 2.3 356 388 M-URW2442 24" 42" 44 2.7 371 409 M-URW2448 24" 48" 46 3.0 404 448 M-URW2454 24" 54" 48 3.7 421 471 M-URW2460 24" 60" 53 3.7 442 497 M-URW2466 24" 66" 68 4.4 482 542 M-URW2472 24" 72" 75 4.4 522 587 M-URW2478 24" 78" 81 5.1 563 633 M-URW2484 24" 84" 88 5.1 603 679 M-URW2490 24" 90" 94 7.5 630 712 Rectangular Worksurface, 30"D M-URW3024 30" 24" 27 1.9 356 384 M-URW3030 30" 30" 39 2.4 371 405 M-URW3036 30" 36" 45 2.8 397 437 M-URW3042 30" 42" 47 3.2 413 461 M-URW3048 30" 48" 52 3.6 442 497 M-URW3054 30" 54" 59 4.6 462 524 M-URW3060 30" 60" 63 4.6 483 551 M-URW3066 30" 66" 72 5.5 522 597 M-URW3072 30" 72" 80 5.5 563 645 M-URW3078 30" 78" 87 6.3 603 691 M-URW3084 30" 84" 93 6.2 642 738 M-URW3090 30" 90" 100 6.7 692 794 124

SIN 711-1/2 Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS Extended Rectangular Worksurface: Edgeband Rectangular Worksurface. Grain direction runs along width (directional laminates only). Worksurfaces 54" or above require middle support unless specified with an external support channel. Any worksurface spanning longer than 72 requires floor support. Grommets are located 6.36" from outer edges 48" and greater. Add suffix "N" to a model number for no grommets, no upcharge. Example: M-FTRW2426N W Description Model D W Wt. Cubes L1 List L2 List Emerge T-Span Worksurface, 24"D Prefix T-Span Worksurface, 24"D D With Grommets M-FTRW2426 24" 26" 22 1.9 361 389 M-FTRW2432 24" 32" 26 2.3 384 416 M-FTRW2438 24" 38" 32 2.6 402 440 M-FTRW2444 24" 44" 46 3.7 433 477 M-FTRW2450 24" 50" 48 3.7 449 499 M-FTRW2456 24" 56" 53 4.4 469 524 M-FTRW2462 24" 62" 68 4.4 490 550 M-FTRW2468 24" 68" 75 4.6 514 579 M-PXRW2426 24" 26" 22 1.8 371 399 M-PXRW2432 24" 32" 26 2.2 397 429 M-PXRW2438 24" 38" 32 2.5 413 451 M-PXRW2444 24" 44" 44 2.9 445 489 M-PXRW2450 24" 50" 46 3.3 462 512 M-PXRW2456 24" 56" 48 3.7 483 538 M-PXRW2462 24" 62" 53 4.1 503 563 M-PXRW2468 24" 68" 68 4.5 528 593 REFERENCE EMERGE PREFIX SMARTSPACE WORKSURFACES STORAGE SURPASS PREPARE ACCESSORIES SEATING INDEX 125

Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS SIN 711-1/2 INDEX SEATING ACCESSORIES STORAGE PREPARE SURPASS SMARTSPACE WORKSURFACES PREFIX EMERGE REFERENCE Wedge Worksurface: Edgeband Wedge Worksurface. Grain Direction runs along width (directional laminates only). Worksurfaces 54" or above require middle support unless specified with an external support channel. Add suffix "N" to a model number for no grommets, no upcharge. Example: M-UTWD482024N DL Description W User Edge Wedge Worksurface 20"L / 24"R Wedge Worksurface 24"L / 20"R Model DR Depth L Depth R User Edge W Wt. Cubes L1 List L2 List With Grommets M-UTWD482024 20" 24" 52" 47 3.4 472 516 M-UTWD542024 20" 24" 58" 52 3.8 513 563 M-UTWD602024 20" 24" 64" 55 4.1 564 619 M-UTWD662024 20" 24" 70" 64 4.5 615 675 M-UTWD722024 20" 24" 76" 72 4.9 666 731 M-UTWD482420 24" 20" 52" 47 3.4 472 516 M-UTWD542420 24" 20" 58" 52 3.8 513 563 M-UTWD602420 24" 20" 64" 55 4.1 564 619 M-UTWD662420 24" 20" 70" 64 4.5 615 675 M-UTWD722420 24" 20" 76" 72 4.9 666 731 Wedge Worksurface 24"L / 30"R M-UTWD482430 24" 30" 52" 48 4.1 504 559 M-UTWD542430 24" 30" 58" 54 4.6 552 614 M-UTWD602430 24" 30" 64" 57 5.0 620 688 M-UTWD662430 24" 30" 70" 66 5.5 671 746 M-UTWD722430 24" 30" 76" 74 6.0 728 810 Wedge Worksurface 30"L / 24"R M-UTWD483024 30" 24" 52" 48 4.1 504 559 M-UTWD543024 30" 24" 58" 54 4.6 552 614 M-UTWD603024 30" 24" 64" 57 5.0 620 688 M-UTWD663024 30" 24" 70" 66 5.5 671 746 M-UTWD723024 30" 24" 76" 74 6.0 728 810 126

SIN 711-1/2 Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS Straight-Front Corner Worksurface: Edgeband Straight-Front Corner Worksurface. Rear support bracket. D User Edge W Grain direction runs diagonally along worksurface (directional laminates only). Add suffix "N" to a model number for no grommet, no upcharge. Example: M-USCW2436N Description Model Depth User Edge W Wt. Cubes L1 List L2 List With Grommet Straight Front Corner, 24" Depth M-USCW2436 24" 17" 36" 46 3.4 674 724 M-USCW2442 24" 25" 42" 59 3.3 696 764 M-USCW2448 24" 22" 48" 72 5.7 919 1007 Straight Front Corner, 30" Depth M-USCW3042 30" 17" 42" 76 4.4 899 967 M-USCW3048 30" 25" 48" 77 5.7 975 1063 REFERENCE EMERGE PREFIX SMARTSPACE WORKSURFACES STORAGE SURPASS PREPARE ACCESSORIES SEATING INDEX 127

Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS SIN 711-1/2 INDEX SEATING ACCESSORIES STORAGE PREPARE SURPASS SMARTSPACE WORKSURFACES PREFIX EMERGE REFERENCE Radius-Front Corner Worksurface: Edgeband Radius-Front Corner Worksurface. Rear support bracket. DL Radius Grain direction runs diagonally along worksurface (directional laminates only). Add suffix "N" to a model number for no grommet, no upcharge. Example: M-URCW2436N Description Model Depth Radius W Wt. Cubes L1 List L2 List Radius Front Corner, 24" Depth Radius Front Corner, 30" Depth W DR With Grommet M-URCW2436 24" 11" 36" 46 3.4 674 724 M-URCW2442 24" 17" 42" 59 3.3 696 764 M-URCW2448 24" 17" 48" 72 5.7 919 1007 M-URCW3042 30" 11" 42" 76 4.4 899 967 M-URCW3048 30" 17" 48" 77 5.7 975 1063 128

SIN 711-1/2 Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS Radius-Front L-Return Worksurface: Edgeband Radius-Front L-Return Worksurface. Rear support bracket. Grain direction runs along length of worksurface (directional laminates only). Worksurfaces 54" or above require middle support unless specified with an external support channel. Any worksurface spanning longer than 72 requires floor support. Add suffix "N" to a model number for no grommets, no upcharge. Example: M-ULRL243660N D Radius Description Model D Radius W L Wt. Cubes L1 List L2 List L-Return Worksurface Left-Hand, 24"D, 36"W L-Return Worksurface Left-Hand, 24"D, 48"W L-Return Worksurface Right-Hand, 24"D, 36"W L-Return Worksurface Right-Hand, 24"D, 48"W L D W Left-Handed Shown With Grommets M-ULRL243660 24" 11" 36" 60" 54 5.4 821 903 M-ULRL243672 24" 11" 36" 72" 63 6.4 864 962 M-ULRL244860 24" 17" 48" 60" 75 7.1 864 996 M-ULRL244872 24" 17" 48" 72" 86 8.5 901 1011 M-ULRR243660 24" 11" 36" 60" 54 5.4 821 903 M-ULRR243672 24" 11" 36" 72" 63 6.4 864 962 M-ULRR244860 24" 17" 48" 60" 75 7.1 864 996 M-ULRR244872 24" 17" 48" 72" 86 8.5 901 1011 REFERENCE EMERGE PREFIX SMARTSPACE WORKSURFACES STORAGE SURPASS PREPARE ACCESSORIES SEATING INDEX 129

Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS SIN 711-1/2 INDEX SEATING ACCESSORIES STORAGE PREPARE SURPASS SMARTSPACE WORKSURFACES PREFIX EMERGE REFERENCE Radius End Peninsula Worksurface: Edgeband Radius End Peninsula Worksurface. Grain direction runs along width of worksurface (directional laminates only). Unsupported spans 54" or greater requires an external support channel. Add suffix "N" to a model number for no grommet, no upcharge. Example: M-URP3060N Cannot be used freestanding - must be connected to a panel or return surface. W Description Model D W Wt. Cubes L1 List L2 List Radius End Peninsula Worksurface, 30"D Radius End Peninsula Worksurface, 36"D D With Grommet M-URP3060 30" 60" 63" 3.8 748 816 M-URP3066 30" 66" 72" 5.5 771 846 M-URP3072 30" 72" 80" 5.5 798 880 M-URP3660 36" 60" 75" 5.4 798 880 M-URP3666 36" 66" 80" 6.4 827 917 M-URP3672 36" 72" 89" 6.4 849 947 130

SIN 711-1/2 Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS "P" Shaped Peninsula Worksurface: Edgeband D "P" Shaped Peninsula Worksurface. right-hand shown Grain direction runs along width of worksurface (directional laminates only). Unsupported spans 54" or greater requires an external support channel. Add suffix "N" to a model number for no grommet, no upcharge. Example: M-UPPL3072N Cannot be used as freestanding - must be connected to a panel or return surface. Description Model D W Wt. Cubes L1 List L2 List Left-Hand P-Shaped Peninsula Worksurface, 30"D Right-Hand P-Shaped Peninsula Worksurface, 30"D W 42" diameter With Grommet M-UPPL3072 30" 72" 90 7.5 1128 1210 M-UPPR3072 30" 72" 90 7.5 1128 1210 REFERENCE EMERGE PREFIX SMARTSPACE WORKSURFACES STORAGE SURPASS PREPARE ACCESSORIES SEATING INDEX 131

Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS SIN 711-1/2 INDEX SEATING ACCESSORIES STORAGE PREPARE SURPASS SMARTSPACE WORKSURFACES PREFIX EMERGE REFERENCE Grand Peninsula Worksurface: Edgeband Grand Peninsula Worksurface. left-hand shown Grain direction runs along width of worksurface (directional laminates only). Unsupported spans 54" or greater requires an external support channel. Add suffix "N" to a model number for no grommet, no upcharge. Example: M-UGPL244866N Does not include rear corner support bracket. Cannot be used as freestanding - must be connected to a panel or return surface. Description Model D W L Wt. Cubes L1 List L2 List Left-Hand Grand Peninsula Worksurface Right-Hand Grand Peninsula Worksurface L D W With Grommet M-UGPL244866 24" 48" 66" 84 8.5 1128 1248 M-UGPL244872 24" 48" 72" 91 8.5 1176 1304 M-UGPR244866 24" 48" 66" 84 8.5 1128 1248 M-UGPR244872 24" 48" 72" 91 8.5 1176 1304 132

SIN 711-1/2 Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS Half Round Extension Worksurface: Edgeband Half Round Extension Worksurface. For use at the end of a panel run for fixed or mobile applications. Grain direction runs perpendicular to back edge of worksurface (directional laminates only). Description Model D W Wt. Cubes L1 List L2 List Prefix Half Round Extension 24" M-PXHR24 24" 30" 52 4.6 604 648 Prefix Half Round Extension 30" M-PXHR30 30" 36" 77 5.8 641 685 Emerge Half Round Extension 24" M-FTHR24 24" 30" 52 4.6 604 648 Emerge Half Round Extension 30" M-FTHR30 30" 36" 77 5.8 641 685 Radius Connecting Top. D W Radius Connecting Worksurface Top: Edgeband Grain direction is diagonal (45º) (directional laminates only). Description Model D W Wt. Cubes L1 List L2 List Prefix Radius Connecting Worksurface M-PXCR24 24" 26" 18 2.4 457 479 Emerge Radius Connecting Worksurface M-FTCR24 24" 26" 18 2.4 457 479 REFERENCE EMERGE PREFIX SMARTSPACE WORKSURFACES STORAGE SURPASS PREPARE ACCESSORIES SEATING INDEX 133

Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS SIN 711-1/2 INDEX SEATING ACCESSORIES STORAGE PREPARE SURPASS SMARTSPACE WORKSURFACES PREFIX EMERGE REFERENCE 120 Degree Corner Worksurface - Edgeband 120 Degree Corner Worksurface Corner bracket. Grain direction runs along width of worksurface (directional laminates only). Standard with one wire management grommet in corner location. Add suffix "N" to a model number for no grommet, no upcharge. Example: M-UYCW2430N Description Model D W Wt. Cubes L1 List L2 List With Grommet 120 Worksurface, 24"D M-UYCW2430 24" 30" 72 5.1 581 649 M-UYCW2436 24" 36" 77 7.1 633 721 M-UYCW2442 24" 42" 82 8.5 792 902 M-UYCW2448 24" 48" 87 10.6 898 1034 Pie 60 Degree Radius Connecting Worksurface Pie 60 Degree Radius Connecting Worksurface Corner bracket. Used as a transitional worksurface with 120 Corner Worksurfaces. Description Model D W Wt. Cubes L1 List L2 List Pie 60 Radius Connecting Worksurface M-UWPR24 24" 24" 17 2.4 410 432 134

SIN 711-1 Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS Countertops Countertops provide a functional transactional worksurface, while providing a visual cue by physically defining a user and guest space. Maxon Countertops are offered in Edgeband. Countertops are 15½" deep and offer a crisp, clean look. Edge is available in coordinating woodgrain options. Corner (Edgeband) Straight Special on Maxon countertops Countertops are available in straight and corner configurations. Countertops are flush with the ends of panel top cap. Emerge Countertops Mounting brackets, top cap, and attaching hardware included. When ordering Countertops match panel widths to cover the panel run. Prefix Countertops Mounting brackets and attaching hardware ordered separately. Model M-P51500 brackets are for 35"H or 50"H panels. Model M-P51500-42 brackets are for 42-1/2"H panels. Order two model M-P51500 or M-P51500-42 for straight countertops. Order three model M-P51500 or M-P51500-42 for corner countertops. Countertops can be mounted off modular. For Straight Countertop applications, countertops can be mounted in any combination to cover the panel run. When ordering Corner Countertop, order a corner size to fit the larger return panel. Add a Straight Countertop with 2 Countertop Flat Brackets to equal the panel run. Outside ends of Countertops must end at a Countertop Mounting Bracket, they cannot end mid panel or hang over the end of run. 42"w 60"w 30"w 30"w 42"w 30"w 30"w 30"w 30"w 42"w 42"w 30"w 18"w 30"w REFERENCE EMERGE PREFIX SMARTSPACE WORKSURFACES STORAGE SURPASS PREPARE ACCESSORIES SEATING INDEX 135

Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS SIN 711-1 INDEX SEATING ACCESSORIES STORAGE PREPARE SURPASS SMARTSPACE WORKSURFACES PREFIX EMERGE REFERENCE EMERGE Countertop with Support - Edgeband Straight Countertop Top Cap Countertop Brackets Grain direction runs along width of worksurface (directional laminates only). Countertops are 15"D. Description Model D W Wt. Cubes L1 List L2 List Straight Countertop 15Dx24W WITH SUPPORT M-FTCT1524E 15" 24" 15.0 1.2 543 565 Straight Countertop 15Dx30W WITH SUPPORT M-FTCT1530E 15" 30" 19.0 1.4 574 602 Straight Countertop 15Dx36W WITH SUPPORT M-FTCT1536E 15" 36" 21.0 1.7 605 637 Straight Countertop 15Dx42W WITH SUPPORT M-FTCT1542E 15" 42" 25.0 1.9 636 674 Straight Countertop 15Dx48W WITH SUPPORT M-FTCT1548E 15" 48" 29.0 2.1 665 709 Straight Countertop 15Dx54W WITH SUPPORT M-FTCT1554E 15" 54" 33.0 2.7 695 745 Straight Countertop 15Dx60W WITH SUPPORT M-FTCT1560E 15" 60" 37.0 2.7 726 781 Straight Countertop 15Dx66W WITH SUPPORT M-FTCT1566E 15" 66" 41.0 3.2 756 816 Straight Countertop 15Dx72W WITH SUPPORT M-FTCT1572E 15" 72" 45.0 3.2 787 852 EMERGE 90 Degree Corner Countertop with Support - Edgeband 90 Degree Corner Countertop Top Caps Countertop Brackets Grain direction runs along width of worksurface (directional laminates only). Countertops are 15"D. Description Model D W Wt. Cubes L1 List L2 List Corner Countertop 15Dx24W WITH SUPPORT M-FTCCT152424E 15" 24" 34.0 2.8 935 957 Corner Countertop 15Dx30W WITH SUPPORT M-FTCCT153030E 15" 30" 39.0 4.0 1042 1070 Corner Countertop 15Dx36W WITH SUPPORT M-FTCCT153636E 15" 36" 45.0 5.1 1151 1183 136

SIN 711-1 Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS PREFIX Straight Countertop: Edgeband Straight Countertop Order counter top brackets separately. Grain direction runs along width of worksurface (directional laminates only). Countertops are 15"D. Must order panel top caps separately. Description Model D W Wt. Cubes L1 List L2 List PREFIX Straight Countertop M-PXCT1512E 15" 12" 14 1.0 349 361 M-PXCT1518E 15" 18" 16 1.2 369 387 M-PXCT1524E 15" 24" 18 1.4 384 406 M-PXCT1530E 15" 30" 20 1.7 403 431 M-PXCT1536E 15" 36" 22 2.1 421 453 M-PXCT1542E 15" 42" 24 2.4 439 477 M-PXCT1548E 15" 48" 26 2.7 464 508 M-PXCT1554E 15" 54" 28 3.0 480 535 M-PXCT1560E 15" 60" 30 3.3 503 563 M-PXCT1566E 15" 66" 32 3.6 517 582 M-PXCT1572E 15" 72" 34 3.9 535 605 PREFIX 90º Corner Countertop: Edgeband 90º Corner Countertop. Order counter top brackets separately. Grain direction runs diagonally along of worksurface (directional laminates only). Edgeband Countertops are 15"D. Must order panel top caps separately. Description Model D W Wt. Cubes L1 List L2 List PREFIX 90º Corner Countertop, Edgeband M-PXCCT152424E 15" 24" 25 4.1 631 653 M-PXCCT153030E 15" 30" 35 5.4 748 776 M-PXCCT153636E 15" 36" 45 6.9 837 869 M-PXCCT154242E 15" 42" 55 7.2 977 1015 W W D D REFERENCE EMERGE PREFIX SMARTSPACE WORKSURFACES STORAGE SURPASS PREPARE ACCESSORIES SEATING INDEX 137

Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS SIN 711-1/2 INDEX SEATING ACCESSORIES STORAGE PREPARE SURPASS SMARTSPACE WORKSURFACES PREFIX EMERGE REFERENCE Rectangular Worksurface Support Kit (Rectangular, Transition, Arc Worktops) Tie Bracket (1), Cantilevered Worksurface Bracket-Left & attachment hardware (1), and Cantilevered Worksurface Bracket-Right & attachment hardware (1 for M-UWSKR2, 2 for M-UWSKR3). Rectangular Worksurface Support Kit M-UWSKR2 17 1.4 126 Rectangular Worksurface Support Kit for 20 deep M-UWSKR2-20 17 1.3 123 Rectangular Worksurface Support Kit M-UWSKR3 26 1.4 166 Rectangular Worksurface Support Kit for 20 deep M-UWSKR3-20 25 1.3 162 Corner Worksurface Support Kit (Straight & Radius Front, Transition) Tie Bracket (1), Cantilevered Worksurface Bracket-Left & attachment hardware (1), Cantilevered Worksurface Bracket- Right & attachment hardware (1), and Bracket Support. Corner Worksurface Support Kit M-UWSKC D 18 1.4 133 D Discontinued December 31, 2018 for models on this page. 138 *Paints and upcharges associated with each are now outlined in the front of the pricebook. A guide on "How to Specify" product has also been added to the beginning.

SIN 711-1/2 Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS L-Return Worksurface Support Kit (Straight & Radius Front) Tie Bracket (1), Cantilevered Worksurface Bracket-Left & attachment hardware (1), Cantilevered Worksurface Bracket- Right & attachment hardware (2), and Bracket Support. L-Return Worksurface Support Kit M-UWSKL D 26 1.4 166 Worksurface Stanchions Stanchion Models ending in WT are to be used when a worktop is placed on the storage unit. Worksurface Support Stanchion 5"H x 12"D M-USS0512WT 3.5 0.5 316 Worksurface Support Stanchion 5"H x 18"D M-USS0518WT 4.1 0.7 333 Worksurface Support Stanchion 6"H x 12"D M-USS0612 3.5 0.5 333 Worksurface Support Stanchion 6"H x 18"D M-USS0618 4.1 0.7 349 Worksurface Support Stanchion 10"H x 12"D M-USS1012WT 3.0 1.2 264 Worksurface Support Stanchion 10"H x 18"D M-USS1018WT 5.0 1.4 280 Worksurface Support Stanchion 11"H x 12"D M-USS1112 3.0 1.2 358 Worksurface Support Stanchion 11"H x 18"D M-USS1118 5.0 1.4 374 Universal Spanner Rail Spanner Rail. Adjustable worksurface mount clips. Panel Brackets. Used to replace the support bracket and end panel bracket when adjacent return panel is wider than the worksurface depth. Use matching width to the wing panel. Universal Spanner Rail 24"W M-UWSR24 2.5 0.39 94 Universal Spanner Rail 30"W M-UWSR30 3.0 0.39 105 Universal Spanner Rail 36"W M-UWSR36 3.5 0.48 116 Universal Spanner Rail 42"W M-UWSR42 4.0 0.48 126 Universal Spanner Rail 48"W M-UWSR48 4.5 0.56 136 REFERENCE EMERGE PREFIX SMARTSPACE WORKSURFACES STORAGE SURPASS PREPARE ACCESSORIES SEATING INDEX D Discontinued December 31, 2018 for models on this page. 139

Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS SIN 711-1/2 INDEX SEATING ACCESSORIES STORAGE PREPARE SURPASS SMARTSPACE WORKSURFACES PREFIX EMERGE REFERENCE Peninsula Worksurface Support Kit (Radius, b, d, Grand, Curved) Tie Bracket (1), Universal Support Column (1), Bracket Supports (1 Pair). Peninsula Worksurface Support Kit M-UWSKP 12 1 273 Half-Round Extension - Fixed - Worksurface Support Kit Tie Bracket (1), 24" Flat Bracket (2), Universal Support Column (1). Half Round Extension - Fixed - Worksurface Support Kit Universal Worksurface Support Column Universal Worksurface Support Column. Universal Worksurface Post Leg Universal Worksurface Post Leg. 7x7 mounting plate. M-UWSKHF 32 2.6 391 Universal Worksurface Support Column M-USC 10 1 229 Universal Worksurface Post Leg 29.5" M-UWSL29 6.7 3.1 248 Universal Worksurface Post Leg 40.5" M-UWSL40 10 4.1 292 140 *Paints and upcharges associated with each are now outlined in the front of the pricebook. A guide on "How to Specify" product has also been added to the beginning.

SIN 711-1/2 Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS Cantilevered Worksurface Bracket Cantilevered Worksurface Bracket. Cantilevered Worksurface Bracket, Left-Handed M-C1L 9 1.4 65 Cantilevered Worksurface Bracket, Right-Handed M-C1R 9 1.4 65 Worksurface Support Flat Bracket Worksurface Support Flat Bracket. Cannot be used with O-Legs. Connecting Top/120 Bridge Support Kit Worksurface Support Flat Bracket, 24" M-FB24 3 0.3 60 Worksurface Support Flat Bracket, 30" M-FB30 5 0.8 83 Countertop Flat Bracket Countertop Flat Bracket Can be used with worksurfaces. Countertop Flat Bracket M-CTFB 0.2 0.3 35 Tie Bracket (1), and 24" Flat Bracket (2). M-C1L Shown REFERENCE EMERGE PREFIX SMARTSPACE WORKSURFACES STORAGE SURPASS PREPARE ACCESSORIES SEATING INDEX Connecting Top/ 120 Bridge Support Kit M-UWSKCT 19 1.4 131 141

Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS SIN 711-1/2 INDEX SEATING ACCESSORIES STORAGE PREPARE SURPASS SMARTSPACE WORKSURFACES PREFIX EMERGE REFERENCE Universal Worksurface Support Legs Legs and attaching hardware. Description Model H W Wt. Cubes List O-Leg 20", 24", 30" wide M-SL2028O 29.5" 20" 15 3.6 303 M-SL2428O 29.5" 24" 17 3.6 314 M-SL3028O 29.5" 30" 19 5.3 325 Shared O-Leg 12", 20", 24", 30" wide M-SL1228SL 29.5" 12" 7.0 0.5 293 M-SL2028SL 29.5" 20" 16.5 3.6 314 M-SL2428SL 29.5" 24" 18.7 3.6 335 M-SL3028SL 29.5" 30" 20.9 5.3 356 Panel Mounted O-Leg Bracket M-SLPBL 29.5" 3.0 3.6 89 M-SLPBR 29.5" 3.0 3.6 89 Support Leg 24", 30" wide M-MDSL2429 29.5" 24" 25 1.1 204 M-MDSL3029 29.5" 30" 25 1.1 214 142 *Paints and upcharges associated with each are now outlined in the front of the pricebook. A guide on "How to Specify" product has also been added to the beginning.

SIN 711-1/2 Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS Universal Worksurface Support Legs Legs and attaching hardware. Must use rectangular edgebanded worksurfaces with O-Legs. Description Model H W Wt. Cubes List Standing Height O-Leg 24", 30" wide Shared Standing Height O-Leg 24", 30" wide Panel Mounted Standing Height O-Leg Bracket O-Leg Stanchion 20", 24", 30" wide Double Depth O-Leg 48", 60" wide M-SL2441O 41" 24" 16 5.2 440 M-SL3041O 41" 30" 17 6.4 502 M-SL2441SL 41" 24" 16 5.2 470 M-SL3041SL 41" 30" 17 6.4 534 M-SLSPBL 41" 6.0 3.7 131 M-SLSPBR 41" 6.0 3.7 131 M-SCAW6520 6" 20" 5 0.9 209 M-SCAW6524 6" 24" 6 0.9 231 M-SCAW6530 6" 30" 7 0.9 251 M-SL4828O 29.5" 48" 18 7.0 575 M-SL6028O 29.5" 60" 17 8.6 654 REFERENCE EMERGE PREFIX SMARTSPACE WORKSURFACES STORAGE SURPASS PREPARE ACCESSORIES SEATING INDEX 143

Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS SIN 711-1/2 INDEX SEATING ACCESSORIES STORAGE PREPARE SURPASS SMARTSPACE WORKSURFACES PREFIX EMERGE REFERENCE Universal Worksurface End Panel Support Universal Worksurface End Panel Support, panel mounting brackets and adjustable glides. 28" High for desk height applications. Used in EMERGE and PREFIX panel environments only. Description Model H D Wt. Cubes List Universal Worksurface End Panel Support, 12" D, Left-Handed Universal Worksurface End Panel Support, 12" D, Right-Handed Universal Worksurface End Panel Support, 24" D, Left-Handed Universal Worksurface End Panel Support, 24" D, Right-Handed Universal Worksurface End Panel Support, 30" D, Left-Handed Universal Worksurface End Panel Support, 30" D, Right-Handed Universal Worksurface Open Panel Mounted P-Leg Support Universal Worksurface Support, panel mounting brackets and adjustable glide. 28" High for desk height applications. Used in EMERGE and PREFIX panel environments only. M-PMEP12L 28" 12" 11 2.8 296 M-PMEP12R 28" 12" 11 2.8 296 M-PMEP24L 28" 24" 22 2.8 351 M-PMEP24R 28" 24" 22 2.8 351 M-PMEP30L 28" 30" 25 2.8 391 M-PMEP30R 28" 30" 25 2.8 391 Description Model H D Wt. Cubes List Universal Worksurface End Panel Support, 12" D M-UPMHEP1229 29" 12" 7 0.5 283 Universal Worksurface End Panel Support, 24" D M-UPMHEP2429 29" 24" 11 1.2 293 Universal Worksurface Open Panel Support, 30" D M-UPMHEP3029 29" 30" 15 1.8 303 144 *Paints and upcharges associated with each are now outlined in the front of the pricebook. A guide on "How to Specify" product has also been added to the beginning.

SIN 711-1/2 Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS Worksurface Support - Return Worksurface Bracket Return Worksurface Bracket (Pair) Universal Worksurface Tower Support Universal Worksurface Tower Support Bracket. Worksurface Support- Return Worksurface Bracket. M-CWB2 0.4 0.3 33 Intended to attach the side of the work surface to the side of the storage tower. Universal Worksurface Tower Support Bracket M-TB2W1 1 0.5 44 Worksurface Support - Attaching Bracket Worksurfaces Support-Attaching Bracket. Worksurface Support-Attaching Bracket is for attaching the fronts of two Worksurfaces. Also used for attaching Straight Countertops to Corner Countertops. Worksurface Support - Attaching Bracket Worksurface Support - Attaching Bracket (Packet of 10) M-DAB1 0.1 0.3 19 M-DAB10 1 0.3 76 REFERENCE EMERGE PREFIX SMARTSPACE WORKSURFACES STORAGE SURPASS PREPARE ACCESSORIES SEATING INDEX 145

Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS SIN 711-1/2 INDEX SEATING ACCESSORIES STORAGE PREPARE SURPASS SMARTSPACE WORKSURFACES PREFIX EMERGE REFERENCE External Table Top Support Channel Support Channel See table below. External Table Top Sup Chnl 30" M-PPSC42 5.8 0.4 177 External Table Top Sup Chnl 36" M-PPSC48 5.8 0.4 183 External Table Top Sup Chnl 41" M-PPSC54 6.6 0.4 235 External Table Top Sup Chnl 48" M-PPSC60 8.3 0.5 240 External Table Top Sup Chnl 60" M-PPSC72 9.9 0.5 250 External Table Top Sup Chnl 72" M-PPSC84 11.5 0.5 260 Support Combination External Support Channel Selection Guide Worksurface Width for Rectangle SUPPORT 1 SUPPORT 2 72" 66" 60" 54" O-Leg O-Leg M-PPSC72 M-PPSC60 M-PPSC60 M-PPSC54 O-Leg Full End panel with Gusset M-PPSC72 M-PPSC60 M-PPSC60 M-PPSC54 Full End panel with Gusset Full End panel with Gusset M-PPSC72 M-PPSC60 M-PPSC60 M-PPSC54 O-Leg Pedestal M-PPSC60 M-PPSC60 M-PPSC54 Pedestal Full End panel with Gusset M-PPSC60 M-PPSC60 Pedestal O-Leg Pedestal Full End panel with Gusset Pedestal 2H Lat/PS 2H Lat/PS 2H Lat/PS 146

SIN 711-1/2 Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS PREFIX Countertop Support Brackets 2 brackets, 1 left and 1 right, and hardware 42.5"H base panels requires a unique set of brackets. (See below) Order 2 sets of brackets for each countertop Standard Countertop Support M-P51500 1.0 0.1 54 42.5"H Base Panel Countertop Support M-P51500-42 1.0 0.1 54 REFERENCE EMERGE PREFIX SMARTSPACE WORKSURFACES STORAGE SURPASS PREPARE ACCESSORIES SEATING INDEX 147

Updated Pricing and Content as of July 1, 2018 WORKSURFACES & SUPPORTS SIN 711-1/2 INDEX SEATING ACCESSORIES STORAGE PREPARE SURPASS SMARTSPACE WORKSURFACES PREFIX EMERGE REFERENCE 148