Display Specificaion WWW.SOLAR-TECHNOLOGIES.COM Solar Technologies, Inc. - Headquarers 27142 Burbank Foohill Ranch, CA 92610 949.458.1080 TEL 949.458.1081 FAX Sales@Solar-Technologies.com The Solar Technologies name and logo are he service marks of Solar Technologies, Inc. All oher rademarks, service marks, logos, slogans, domain names, rade names and copyrighs (collecively Marks ) are he properies of heir respecive owners. Solar Technologies disclaims any proprieary ineres in Marks oher han is own. All produc specificaions are provided for convenience only. The produc specificaions are provided as is and wih respec o he informaion conained herein Solar Technologies disclaims all represenaions and warranies of any kind, including warranies of merchanabiliy, finess for a paricular purpose, and accuracy of he conen. Please consul he manufacurer for specific produc informaion.
LIQUID CRYSTAL DISPLAY DIVISION PRODUCT INFORMATION FEATURES (1) 10.4 XGA display size for noebook PC (2) LVDS inerface sysem (3) Slim(5.2mmMAX) & ligh weigh design MECHANICAL SPECIFICATIONS Iem Dimensional Ouline (Typ.) Number of Pixels Acive Area Pixel Pich Weigh (approximaely) Backligh 26cm COLOUR TFT-LCD MODULE (10.4 TYPE) LTM10C313K (p-si TFT) XGA Specificaions 238.6(W) x 173.2(H) x 5.2max(D) mm 1024(W) x 768(H) pixels 210.432(W) x 157.824(H) mm 0.2055(W) x 0.2055(H) 265 g Single CCFL, Sideligh ype TENTATIVE ABSOLUTE MAXIMUM RATINGS Iem Min. Max. Uni Supply Volage (V DD ) -0.3 4.0 V (V FL ) 0 2.0 kv(rms) FL Driving Frequency (f FL ) - 100 khz Inpu Signal Volage (V IN ) -0.3 V DD +0.3 V Operaing Temperaure 0 50 C Sorage Temperaure -20 60 C Sorage Humidiy 10 90 %(RH) ELECTRICAL SPECIFICATION Iem Min. Typ. Max. Uni Remarks Supply Volage (V DD ) 3.0 3.3 3.6 V (V FL ) 540 590 640 V(rms) I FL =5 ma(rms) FL Sar Volage (Ta=0C) 1200 --- 1600 V(rms) Receiver Inpu Volage 0 --- 2.4 V Differenial Inpu High Threshold(V TH )*1 --- --- V OS +0.1 V V OS Offse Mode Volage Differenial Inpu Low Threshold(V TL )*1 V OS -0.1 --- --- V V OS =+1.2V Curren Consumpion *2 (I DD ) --- 230 --- ma(rms) *3 (I FL ) (2.5) 5.0 (6.0) ma(rms) *2 *3 Power Consumpion --- 3.7 --- W *1 Refer o DF90CF364 Specificaion by Naional Semiconducor Corporaion. This LCD module conforms o LVDS sandard (TIA/EIA-644) *2 8 color bars paern *3 Exceping he efficiency FL inverer *4 No use Hsync nor Vsync. Only ENAB conrol. OPTICAL SPECIFICATION (Ta=25C) Iem Min. Typ. Max. Uni Remarks Conras Raio (CR) 100 250 --- --- Response Time ( ON ) --- --- 50 ms ( OFF ) --- --- 50 ms Luminance (L) TBD 150 --- cd/m 2 I FL =5mA(rms) *The informaion conained herein is presened only as a guide for he applicaions of our producs. No responsibiliy is assumed by Toshiba or oher righs of he hird paries which may resul from is use. No license is graned by implicaion or oherwise under any paen or paen righs of Toshiba or ohers. *The informaion conained herein may be changed wihou prior noice. I is herefore advisable o conac Toshiba before proceeding wih he design of equipmen incorporaing his produc. (1/10) 2001-07-05 (Ver.0.2)
DIMENSIONAL OUTLINE (fron figure) Uni mm Sandard olerance +/- 0.5 LTM10C313K (2/10) 2001-07-05 (Ver.0.2)
BLOCK DIAGRAM I/F PCB Backligh CN2 CN1 Connecor DC/DC Converer Panel Conroller +LVDS Y-driver Liquid Crysal Panel 1024 x 768 pixels Gray scale Manipulaion Volage Generaion Circui X-driver D/A Converer Circui FPC 1024 pixels 1, 1 2, 1 X2 n-1, 1 X2 n, 1 1024, 1 1, 2 1, Y X 2n-1, Y X 2n, Y 768 pixels 1, 768 1024,768 (3/10) 2001-07-05 (Ver.0.2)
TIMING CHART (1)Verical Timing NCLK ENAB R5-R0 G5-G0 B5-B0 (2)Horizonal Timing NCLK ENAB R5-R0 G5-G0 B5-B0 NCLK ENAB R5-R0 G5-G0 B5-B0 3 X,1 5 1,Y 2,Y X,2 X,3 3,Y 4,Y 5,Y T1 CLK IN T2 CLK IN T1 IN 0-20 T2 IN 0-20 X,4 6,Y 7,Y 1 2 X,Y 3 4 X,Y TCIH X,767 X,768 1021,Y 1023,Y 1022,Y 1024,Y 5 TCIL TSTC THTC VALID DATA V V IH(MIN)2.2(V) IL(MAX)0.8(V) V V IH(MIN)2.2(V) IL(MAX)0.8(V) (4/10) 2001-07-05 (Ver.0.2)
TIMING SPECIFICATION 2) 3) 4) Iem Symbol Min. Typ. Max. Uni Remarks Frame Period 1 778 x 3 806 x 3 860 x 3 --- 1) 5) 16.67 17.78 ms Verical 2 768 x 3 768 x 3 768 x 3 --- 1) 5) Display Term One Line Scanning 3 1336 x 5 1344 x 5 1462 x 5 --- 1) 5) Time 20.04 20.68 --- s Horizonal 4 1024 x 5 1024 x 5 1024 x 5 --- 1) 6) Display Term Clock Period 5 15.0 15.38 --- ns Noe 1) Refer o TIMING CHART a page4 and LVDS specificaion (DS90CF364) by Naional Semiconducor Corporaion. Noe 2) If ENAB is fixed o "H" or "L" level for cerain period while NCLK is supplied, he panel displays black wih some flicker. Noe 3) Don' fix NCLK o "H" or "L" level while he VDD(+3.3V) is supplied. If NCLK is fixed o "H" or "L" level for cerain period while ENAB is spplied, he panel may be damaged. When I holds on, DC volage supplies o liquid crysal maerials and I may cause damage o liquid crysal maerials. Graphic conroller 69000 (Chips & Technology), for example, causes above phenomenon Noe 4) Please adjus LCD operaing signal iming and FL driving frequency, o opimize he display qualiy. There is a possibiliy ha flicker is observed by he inerference of LCD operaing signal iming and FL driving condiion (especially driving frequency), even if he condiion saisfies above iming specificaions and recommended operaing condiions shown in 3. Noe 5) Do no make 1, 2 and 3 flucuae. If 1, 2 and 3 are flucuae, he panel displays black. Noe 6) Keep consan he number of clock wihin one line scanning ime and he number of scanning line wihin one flame period SEQUENCE OF POWER SUPPLIES AND SIGNALS 10ms(Max.) 10ms(Max.) 500ms(Min.) 3.0V 3.0V V DD 40ms(Max.) 40ms(Max.) 0.2V 0ms(Min.) 0ms(Min.) CLK+ IN0+ IN1+ IN2+ CLK- IN0- IN1- IN2-10% 10% 90% 90% 0.2V 0.2V (5/10) 2001-07-05 (Ver.0.2)
CONNECTOR PIN ASSIGNMENT FOR INTERFACE CN1 INPUT SIGNAL Connecor DF19L-14P-1H / HIROSE ELECTRIC CO.,LTD Maing Connecor DF19G-14S-11C(housing) / HIROSE ELECTRIC CO.,LTD Terminal No. Symbol Funcion 1 V DD Power Supply +3.3V 2 V DD Power Supply +3.3V 3 GND 4 GND 5 IN0- Transmission Daa of Pixels 0 (Negaive - ) 6 IN0+ Transmission Daa of Pixels 0 (Posiive + ) 7 IN1- Transmission Daa of Pixels 1 (Negaive - ) 8 IN1+ Transmission Daa of Pixels 1 (Posiive + ) 9 IN2- Transmission Daa of Pixels 2 (Negaive - ) 10 IN2+ Transmission Daa of Pixels 2 (Posiive + ) 11 CLK- Sampling Clock (Negaive - ) 12 CLK+ Sampling Clock (Posiive + ) 13 GND 14 GND CN2 CCFL POWER SOURCE Connecor HV-2S-C1C3/Japan Aviaion Elecronics Indusry., LTD Maing Connecor HV-2P-HF/ Japan Aviaion Elecronics Indusry., LTD Terminal No. Symbol Funcion 1 VFLH CCFL Power Supply ( high volage) 2 VFLL CCFL Power Supply (low volage) (6/10) 2001-07-05 (Ver.0.2)
RECOMMENDED TRANSMITTER (DS90CF363) TO LTM10C313K INTERFACE ASSIGNMENT Case1 6bi Transmier DS90CF363 Inpu Terminal No. Inpu Signal (Graphics conroller oupu signal) Symbol DS90CF363 Symbol Funcion TIN0 44 R0 Red Pixels Display Daa (LSB) TIN1 45 R1 Red Pixels Display Daa TIN2 47 R2 Red Pixels Display Daa TOUT0- TIN3 48 R3 Red Pixels Display Daa TOUT0+ TIN4 1 R4 Red Pixels Display Daa TIN5 3 R5 Red Pixels Display Daa (MSB) TIN6 4 G0 Green Pixels Display Daa (LSB) TIN7 6 G1 Green Pixels Display Daa TIN8 7 G2 Green Pixels Display Daa TIN9 9 G3 Green Pixels Display Daa TOUT1- TIN10 10 G4 Green Pixels Display Daa TOUT1+ TIN11 12 G5 Green Pixels Display Daa (MSB) TIN12 13 B0 Blue Pixels Display Daa (LSB) TIN13 15 B1 Blue Pixels Display Daa TIN14 16 B2 Blue Pixels Display Daa TIN15 18 B3 Blue Pixels Display Daa TIN16 19 B4 Blue Pixels Display Daa TOUT2- TIN17 20 B5 Blue Pixels Display Daa (MSB) TOUT2+ TIN18 22 NC Non Connecion (open) TIN19 23 NC Non Connecion (open) TIN20 25 ENAB Compound Synchronizaion Signal CLK IN 26 NCLK Daa Sampling Clock TCLK OUT- TCLK OUT+ LTM10C313K Oupu Signal Inerface (CN1) Symbol Terminal Symbol No.5 No.6 No.7 No.8 No.9 No.10 No.11 No.12 IN0- IN0+ IN1- IN1+ IN2- IN2+ CLK- CLK+ IN 0 G0 R5 R4 R3 R2 R1 R0 IN 1 IN 2 B1 B0 G5 G4 G3 G2 G1 ENAB NC NC B5 B4 B3 B2 (7/10) 2001-07-05 (Ver.0.2)
RECOMMENDED TRANSMITTER (DS90CF383) TO LTM10C313K INTERFACE ASSIGNMENT Case2 8bi Transmier DS90CF383 Inpu Terminal No. Inpu Signal (Graphics conroller oupu signal) Symbol DS90CF383 Symbol Funcion TIN0 51 R0 Red Pixels Display Daa (LSB) TIN1 52 R1 Red Pixels Display Daa TIN2 54 R2 Red Pixels Display Daa TOUT0- TIN3 55 R3 Red Pixels Display Daa TOUT0+ TIN4 56 R4 Red Pixels Display Daa TIN6 3 R5 Red Pixels Display Daa (MSB) TIN7 4 G0 Green Pixels Display Daa(LSB) TIN8 6 G1 Green Pixels Display Daa TIN9 7 G2 Green Pixels Display Daa TIN12 11 G3 Green Pixels Display Daa TOUT1- TIN13 12 G4 Green Pixels Display Daa TOUT1+ TIN14 14 G5 Green Pixels Display Daa(MSB) TIN15 15 B0 Blue Pixels Display Daa (LSB) TIN18 19 B1 Blue Pixels Display Daa TIN19 20 B2 Blue Pixels Display Daa TIN20 22 B3 Blue Pixels Display Daa TIN21 23 B4 Blue Pixels Display Daa TOUT2- TIN22 24 B5 Blue Pixels Display Daa (MSB) TOUT2+ TIN24 27 NC Non Connecion (open) TIN25 28 NC Non Connecion (open) TIN26 30 ENAB Compound Synchronizaion Signal TIN27 50 NC Non Connecion (open) TIN5 2 NC Non Connecion (open) TIN10 8 NC Non Connecion (open) TOUT3- TIN11 10 NC Non Connecion (open) TOUT3+ TIN16 16 NC Non Connecion (open) TIN17 18 NC Non Connecion (open) TIN23 25 NC Non Connecion (open) CLK IN 31 NCLK Daa Sampling Clock TCLK OUT- TCLK OUT+ LTM10C313K Oupu Signal Inerface (CN1) Symbol Terminal Symbol No.12 No.11 No.10 No.9 No.8 No.7 No.6 No.5 IN0+ IN0- IN1+ IN1- IN2+ IN2- CLK+ CLK- IN 0 G0 R5 R4 R3 R2 R1 R0 IN 1 B1 B0 G5 G4 G3 G2 G1 IN 2 ENAB NC NC B5 B4 B3 B2 IN 3 NC NC NC NC NC NC NC (8/10) 2001-07-05 (Ver.0.2)
256k (k=1024) COLORS COMBINATION TABLE Basic Color Gray Scale of Red Gray Scale of Green Gray Scale of Blue Gray Scale of Whie & Black Display R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Gray Scale Level Black L L L L L L L L L L L L L L L L L L - Blue L L L L L L L L L L L L H H H H H H - Green L L L L L L H H H H H H L L L L L L - Ligh Blue L L L L L L H H H H H H H H H H H H - Red H H H H H H L L L L L L L L L L L L - Purple H H H H H H L L L L L L H H H H H H - Yellow H H H H H H H H H H H H L L L L L L - Whie H H H H H H H H H H H H H H H H H H - Black L L L L L L L L L L L L L L L L L L L 0 L L L L L H L L L L L L L L L L L L L 1 Dark Ligh L L L L H L L L L L L L L L L L L L L 2 L3 L60 H H H H L H L L L L L L L L L L L L L61 H H H H H L L L L L L L L L L L L L L62 Red H H H H H H L L L L L L L L L L L L Red L63 Black L L L L L L L L L L L L L L L L L L L 0 L L L L L L L L L L L H L L L L L L L 1 Dark Ligh L L L L L L L L L L H L L L L L L L L 2 L3 L60 L L L L L L H H H H L H L L L L L L L61 L L L L L L H H H H H L L L L L L L L62 Green L L L L L L H H H H H H L L L L L L Green L63 Black L L L L L L L L L L L L L L L L L L L 0 L L L L L L L L L L L L L L L L L H L 1 Dark Ligh L L L L L L L L L L L L L L L L H L L 2 L3 L60 L L L L L L L L L L L L H H H H L H L61 L L L L L L L L L L L L H H H H H L L62 Blue L L L L L L L L L L L L H H H H H H Blue L63 Black L L L L L L L L L L L L L L L L L L L 0 L L L L L H L L L L L H L L L L L H L 1 Dark L L L L H L L L L L H L L L L L H L L 2 L3 L60 Ligh H H H H L H H H H H L H H H H H L H L61 H H H H H L H H H H H L H H H H H L L62 Whie H H H H H H H H H H H H H H H H H H Whie L63 (9/10) 2001-07-05 (Ver.0.2)
! FOR SAFETY LCD module is generally designed wih precise pars o achieve ligh weighed hin mechanical dimensions. In using our Modules, make cerain ha you fully undersand and pu ino pracice he warnings and safey precauions deailed in Engineering Informaion No.EE-N001,"CAUTIONS AND INSTRUCTIONS FOR TOSHIBA LCD MODULES". Refer o individual specificaions and TECHNICAL DATA shees (hereinafer called "TD") for more deailed echnical informaion. 1) SPECIAL PURPOSES A) Toshiba's Sandard LCD Modules have no been cusomized for operaion in exreme environmens or for use in applicaions where performance failures could be life-hreaening or oherwise caasrophic. B) Since Toshiba's Sandard LCD Modules have no been designed for operaion in exreme environmens, hey mus never be used in devices ha will be exposed o abnormally high levels of vibraion or shock which exceed Toshiba's published specificaion limis. C) In addiion, since Toshiba Sandard LCD Modules have no been designed for use in applicaions where performance failures could be life-hreaening or caasrophic, hey mus never be insalled in aircraf navigaion conrol sysems (such as, bu no limied o Traffic Collision Avoidance Sysem and Air Traffic Indicaor), in miliary defense or weapons sysems, in criical indusrial process-conrol sysems (e.g., hose involved in he producion of nuclear energy), or in criical medical device or paien life-suppor sysems. 2) DISASSEMBLING OR MODIFICATION DO NOT DISASSEMBLE OR MODIFY he module. I may damage sensiive pars inside LCD module, and may cause scraches or dus on he display. Toshiba doses no warran he module, if cusomer disassembled or modified i. 3) BREAKAGE OF LCD PANEL DO NOT INGEST liquid crysal maerial, DO NOT INHALE his maerial, and DO NOT CONTACT he maerial wih skin, if LCD panel is broken and liquid crysal maerial spills ou. If liquid crysal maerial comes ino mouh or eyes, rinse mouh or eyes ou wih waer immediaely. If his maerial conac wih skin or clohs, wash i off immediaely wih alcohol and rinse horoughly wih waer. 4) GLASS OF LCD PANEL BE CAREFUL WITH CHIPS OF GLASS ha may cause injuring fingers or skin, when he glass is broken. 5) ELECTRIC SHOCK DISCONNECT POWER SUPPLY before handling LCD module. DO NOT TOUCH he pars inside LCD module and he fluorescen lamp's connecor or cables in order o preven elecric shock, because high volage is supplied o hese pars from he inverer uni while power supply is urned on. 6) ABSOLUTE MAXIMUM RATINGS AND POWER PROTECTION CIRCUIT DO NOT EXCEED he absolue maximum raing values under he wors probable condiions caused by he supply volage variaion, inpu volage variaion, variaion in pars' consans, environmenal emperaure, ec., oherwise LCD module may be damaged. Employ proecion circui for power supply, whenever he specificaion or TD specifies i. Suiable proecion circui should be applied for each sysem design. 7) DISPOSAL When dispose LCD module, obey o he applicable environmenal regulaions. (10/10) 2001-07-05 (Ver.0.2)