Powerful low-speed polisher, 1600 watt L 1202

Similar documents
Burnishing machine TRINOXFLEX Set. BSE Set

COMPOUND & POLISHING COMPLETE COMPOUND & POLISHING SYSTEM

TURTLE WAX COMPOUND & POLISHING SYSTEM TURTLE WAX PUTS THE SHINE BACK

SUPRAFLEX, the sanding specialist for painted surfaces, wood, stone and metal

Giraffe wall and ceiling sander with interchangeable head system

Special Brushes for Metals, Wood and Hard Plastics

POLY-PTX PROFESSIONAL

The Path to a Perfect Finish. A guide to our most advanced line of gelcoat and paint refinishing products.

The Path to a Perfect Finish

Abrasive products for the automotive industry

SURFACE FINISHING SPECIALISTS MARINE

BETACORD offers its partners a product manufactured from the best raw materials using the most-up-to-date equipment.

For results that shine.

Solid Surfaces. Sanding and polishing solid surface materials chemical-concepts.com

Boat Polishes that inspire

Woodworking & Solid Surface Finishing Products

Cleaning Procedure INTRODUCTION:

Brushware -Cup Brushes -Grinding Wheels -Spindle Brushes -Polishing Mops -Polishing Compounds

Gekatex SAS - Products. Tack rags Buffing pads Sealant wipes. Soft wipes Solvent wipes Microfiber wipes

Universal rotary hammer drill, 2,5 kg, SDS-plus. CHE 2-28 SDS-plus

PUTTIES

PTX Grinding Wheels for Coarse and Fine Finishing

Optima 450 LED Edge-Lit Single-Sided Light Box. Installation Instructions INSTALLATION INSTRUCTIONS. Figure 1. Tools you ll need

Arla WOODEN CARE GUIDE BY DIRECT OUTDOOR LIVING

Complete solutions for machining stainless steel surfaces from FEIN.

Trade of Metal Fabrication. Module 1: Basic Fabrication Unit 12: Abrasive Grinding and Cutting Phase 2

Traditional Grinding & Polishing

Kent Kings Cross Bench KKCB5500

2-speed cordless impact drill 18,0 V PD 2G 18.0

KIESOW DR. BRINKMANN GRINDING POLISHING

POWER TOOL CONSUMABLES Catalogue 6

Bona Abrasives. High-performance abrasives for a perfect surface finish

THE POLISHING REVOLUTION

METAL Machining stainless steel surfaces with FEIN For results that shine

Guidelines for working with

Discover the new advanced solution!

Universal rotary hammer drill, 4 kg, SDS-plus. CHE 4-32 SDS-plus

Masking: Each mirrored sheet is well protected by a durable paint backing and

2-speed cordless drill driver 18,0 V. DD 2G 18.0-EC/2.5 Set

Nuvite Recommended Polishing Procedures for NuShine II Metal Polish The Nuvite Look The Better the Polish Job, The Longer It Lasts!

W 40. Automatic Surface Grinding Machine

Installation Instructions

QWALL 4 ACRYLIC SHOWER WALL INSTALLATION INSTRUCTIONS

NEW! Sanding with built-in dust conveying system. MULTI JETSTREAM Sanding System. Tools for the toughest demands

Reliable solutions with optimised performance

Solid surfaces. Sanding and polishing solid surface materials

TURBULENT ORB by Ned Kahn MAINTENANCE INSTRUCTIONS

smooth operators Sanding Without Sandpaper

QWALL 5.2 (2 Back Panels)

POLYCARBONATE RECTIFICATION PROCEDURES

SprayMax 2K Headlight Clearcoat 250 ml Prod.-no.:

Industrial Contractors Supplies, Inc.

Car Dress Woodwork Repair and Finishing

Grinding with style. -Abrasive web belts for fine grinding metal

Grinding and polishing discs COMBIDISC Corundum A Abrasive disc holders

Banc. zenithinteriors.com

WEAR SAFETY GLASSES WHEN INSTALLING THIS KIT.

POWER TOOL CONSUMABLES

NOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY).

Electron Microscopy Sciences

Industrial and Transportation Business DISTRIBUTOR PRODUCT LINE

How to use a Touch Up Bottle & Brush

tel: fax:

Accessories & Consumables. for Contact Lens Manufacturing and Handling

Solid surfaces. Sanding and polishing solid surface materials

New Products Tools with Character!

ABRASIVES. Buffalo Dental Manufacturing Company, Inc.

INFINITY-Z SHOWER DOOR / TUB DOOR INSTALLATION INSTRUCTION. MODEL #s 01-Chrome

CARE AND MAINTENANCE INSTRUCTIONS. CONGRATULATIONS! You have chosen playground equipment made from robinia wood!

The World of Jöst abrasives

Mold Release, Break-In, Maintenance and Storage. Linda Bergstrom

#85-2-5A: PAINT STRIPPING AND FINISH ANALYSIS AND CORRECTION - (Aug 7, 1985)

Magnetpaint & Sketchpaint

SURFACE FINISH MAINTENANCE

HAND TOOLS, ADHESIVES & CLEANING

WOOD CHIPS. Northwest Indiana Woodworkers Association Volume 18, Issue 5 May President's Corner

Paint Masks - Stencils - Dry Rub Decals - Waterslides +44(0) (mobile)

Fitting Instructions

Necessity leads to innovation

GrafiWrap Vehicle Wrapping

Magic Mandala. Shopping / material list Magic Mandala. Have fun crafting! You can find more creative tips at

ENIGMA AIR ENCLOSURE

Visions Tub Door & Backwall

Refurbishing Your Lincoln Mark VII Dew Wipes

G L O ME S H SCRU B B I N G PADS

P n e u m a t i c To o l A c c e s s o r i e s INDUSTRIAL

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

Processing and design Solid Textile Board

PAINTJOB CATALOGUE HOLLAND IMPORTS INC.

Buffing Wheels PRICE LIST

Frame Finishing Instructions

INSTALLATION INSTRUCTIONS

maintenance guide For more details about Blanchon products and the maintenance of wood floors, please contact your specialist.

Robert Bosch GmbH. Lounge light fixture

Splashback Installation Instructions

PolyCarb has good resistance to many chemicals. Some chemicals may harm the PolyCarb sheets. Contact us when in doubt about any chemical.

Sealer, Primer, Isolation Coat, & Varnish

BRILLIANT RESULTS PERFECT SURFACES IN 3 STEPS.

CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS

Transcription:

Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Powerful low-speed polisher, 600 watt L 202 Order number 278.688 Max. polishing pad diameter 250 mm Max. back-up pad diameter 75 mm No load speed 750 rpm Power input 600 watt Power output 00 watt Tool fixture M 4 Cable length 4,0 m Weight 5, kg Standard equipment Powerful low-speed polisher, 600 watt + High-performance motor: can handle extreme loads + Low speed, high torque + Rugged metal composite housing for optimum heat dissipation + For continuous use with large polishing heads for brushing, polishing and buffing wood and stainless steel + On/off switch + Spindle lock side handle 93.356 hand guard 253.68 handle 253.50

Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Order number 443.27 Polish Contents 250 ml Universal high-performance abrasive paste with maximum removal rate for maximum gloss. Sanding grooves of grain size P 500 can be removed in seconds. Ideally suited for all paint types, including scratch-resistant paints, UV paints and for treating gliders and motorized aircraft, boat hulls, polycarbonate and wood finishing work. The polish is free of wax, silicone and odorant solvents. Minor holograms might be caused by rotary working on dark paints. These can be polished out with the polish P 03/06-LDX in conjunction with the orange polishing sponge PS-O. Abrasiveness 5 / gloss 5. Order number 443.298 Polish Contents 250 ml Special polish for removing scratches with a very deep sheen. Sanding grooves of grain size P 2000 can be removed in seconds. Ideal for all paint types, including scratch-resistant paints, UV paints and for freshening up colours in the case of old paints. Optimum results are achieved with eccentric -step working, and rotary working is of course also possible. The polish is silicone-free, produces little dust and can be easily rubbed in and wiped off. Abrasiveness 3 / gloss 6.

Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Order number 443.30 Sealing Contents 250 ml Paintwork-compatible sealant for new and previously polished paints. It's Carnauba wax protects paint against environmental influences, provides care and protects the high sheen. The sealant can be applied both with a machine (rotary/eccentric) using the red polishing sponge PSR and manually with the red application sponge PUK-R. It contains no abrasive particles and can be painted over. Protective effect 2 / smoothness 4. Order number 37.098 Microfibre polishing cloth, classic 400 x 400 Seamless, washable. For gentle removal of polishing and sealing residues. For a perfect surface finish and brilliant deep gloss.

Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Order number 376.53 Microfibre polishing cloth, premium 400 x 400 Thanks to the very high soft pile, residues can be picked up reliably and gently. This is what makes the microfibre cloth ideal for an optimum paint finish. It can also be used for car wash purposes. Long service life, washing machine safe (without softener). Order number 442.682 Polishing sponge 30 Ø The red sponge for hand application is ergonomically shaped and has a very soft foam with a fine texture. It is ideally suited to working with sealants and care agents on painted and plastic surfaces, for hard-to-reach places or sensitive surfaces that are difficult to deal with by using a machine.

Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Order number 350.745 Velcro pad, cushioned M 4 50 Ø 2 mm cell rubber for even pressure distribution for grinding, polishing or sealing. Order number 434.299 Polishing sponge 200 Ø x 25 The green sponge has a very hard foam with an innovative X-Cut surface that guarantees a constant and evenly high removal rate. The X-Cut texture reduces the building-up of heat. The foam is heat-resistant, tear-resistant and has very good endurance. Ideal for dealing with water droplets, orange peel, trapped dust, tar specks, scratches and bird droppings in conjunction with the P05/05-LDX.

Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Order number 436.40 Polishing sponge 200 Ø x 25 The violet sponge has a hard foam for optimum cooling and guarantees a constant and evenly high removal rate. The foam is heat-resistant, tearresistant and has very good endurance. Ideal for dealing with water droplets, orange peel, trapped dust, tar specks, scratches and bird droppings in conjunction with the P05/05-LDX. Order number 434.337 Polishing sponge 200 Ø x 25 The orange sponge has a medium-hardness foam with a fine foam texture. The foam is heat-resistant, tear-resistant and has very good endurance. Ideal for dealing with holograms, matting, scratches and car wash traces in conjunction with the P 03/06-LDX.

Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Order number 434.426 Polishing sponge 200 Ø x 25 The red sponge has a very soft foam with a fine foam texture. The special PerfectTouch sandwich structure with an additional stronger white foam layer gives the sponge greater rigidity. This configuration increases the service life of the polishing disk. Ideal for dealing with holograms and slight matting in conjunction with the P 03/06-LDX, for paintwork care and sealing in conjunction with the W 02/04. Order number 256.908 Polishing sponge, yellow 220 Ø x 20 Sponge with medium-hard and coarse foam structure. The large diameter and the frisbee shape is perfect for large areas, e.g. in the maritime and aviation areas. Particularly suitable for weathered and mat paintwork, in conjunction with the fine polishing compound.

Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Order number 256.909 Polishing sponge, white 220 Ø x 30 Sponge with medium-hard and fine foam structure. The large diameter and the frisbee shape is perfect for large areas, e.g. in the maritime and aviation areas. Particularly suitable for removing minor signs of use and streaks in conjunction with the fine polishing compound. Order number 398.632 Polishing fleece 230 Ø Traditional frisbee-shaped polishing fleece made of 00% natural wool. With its large diameter and frisbee shape this polishing fleece is perfect for processing large areas in the maritime and aviation areas. For high polishing effect in conjunction with the fine polishing compound.

Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Order number 23.870 Lambswool bonnet 80 Ø Lambswool bonnet with tightening cord, suitable for elastic backing pad. Made of 00% lambswool. For efficient processing of polishing pastes. Suitable for flexible backing pad. Order number 23.862 Flexible backing pad 75 Ø Backing pad from cellular rubber with rounded edges, for lambswool bonnet. Ensures for even pressure when polishing. M4 thread.

Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Order number 22.734 Backed fleece 75 Ø Fibre-back and M 4 threaded flange for removing scratches in glass, stainless steel, acrylic and high-gloss polishing of stainless steel. Use only with the respective polishing mediums. Order number 22.750 Spare fleece With fiber backing. 75 Ø

Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Order number 23.803 Buffing wheel mount, M 4 60 Order number 463.302 Swirl Finder Pocket Light Size ( W x L x H) 90 x 58 x 43 mm Weight 0,056 kg LED light for easy control of surface conditions. Due to the colour temperature and reproduction, surface damage such as holograms, scratches etc. become better visible. Light intensity 40 lumens and adjustable focus with a beam angle of 0-70, lighting time approx. 2 hours incl. batteries. Powered by TCPDF (www.tcpdf.org)