MaxRace F-1 V.5 for PS4 Usage manual ------------------------------------------------------------------------------------------------------- Before using the product, read this manual carefully and retain it for future reference. -------------------------------------------------------------------------------------------------------- 1. Product feature: All G27, G25,MOMO,and GT racing wheel works on PS4 racing games. Supports G25,G27 Clutch function. Compatible with 2 types of gear shift, manual gear shift and automatic transmission gear shift Support Force Feedback function Enables Rapid Fire on Wired Xbox 360 controller and PS 3 /PS4 wired controllers (connect with charge cable) on MaxRace F-1 v.5 converter. More sensitive and accurate Plug and play. Device Overview: <1> USB port Connects to PS 4 console. <2> Digital screen The first digit number is the Shifter (Shift gear): 0 is N (neutral gear), 1~7 gear and means R gear. The second digit number is the force feedback setting: the force feedback function features 5 different levels, 1 is the weakest force feedback level, and 5 is
the strongest force feedback level. Once the force feedback level is set, the current setting will automatically be saved on the MaxRace F-1 v.5 and the settings will remain the same for the next gameplay. The last digit number is the Sensitivity level setting: Featuring 5 different steering sensitivity levels, 1 is the lowest sensitivity, 5 is the highest sensitivity. Once the sensitivity level is set, the current settings will automatically be saved on the MaxRace F-1 v.5 and the settings will remain the same for the next gameplay. <3> - button indicator <4> + button indicator <5> Once connected to Logitech G25/G27/GT/MOMO racing wheel, this Plus button is used to increase the shift level/force feedback/sensitivity a level of the racing wheel depending on the setting. * This button does not work on PlayStation 4 /PlayStation 3 / Xbox 360 wired controllers. <6> Once connected to Logitech G25/G27/GT/MOMO racing wheel, this Minus button is used to decrease the shift level/force feedback/sensitivity a level of the racing wheel depending on the setting. * This button does not work on PlayStation 4 /PlayStation 3 / Xbox 360 wired controllers. <7> Mode Button (M) This button is used to set the digital number, the default setting for the shifter is (the first digit number), you are able to adjust the shifter setting by clicking on the + or button. Pressing this button <M> once, proceeds into the force feedback mode, (the 2nd digit number), adjust the force feedback level by pressing the + or - button. Press <M> button again and the digit number moves into the 3rd number, this mode adjusts the Sensitivity level by pressing the + or - button. Pressing the M button will return back to the 1st digit, (Shifter level settings), each press will switch to the next digit and the mode changes in circulation. <8> Program Button <9>USB Port (PlayStation 3 / Xbox 360 wired controller or Logitech G25/G27/GT/MOMO racing wheel port.)
<10> USB port. PlayStation 4 wired controller port (connect via charging cable) How to connect: Note: the Official WIRED PlayStation 4 Dualshock 4 controller must be required to use on MaxRace F-1 v.5. The steps are shown below: 1. Plug the DualShock4 wired controller to the MaxRace F-1 v.5 2. Connect MaxRace F-1 v.5 to PlayStation 4, and wait until the light bar on the DualShock4 lights up in blue, the connection is successful. 3. Plug in the Xbox 360 /PS3 wired controller or G25/G27/GT/MOMO racing wheel. How to use the Rapid fire function: The Rapid fire function only operates on PlayStation 4 /PlayStation 3 /Xbox 360 wired controller on MaxRace F-1 V.5. To set the rapid fire function on the X button of the PS4 wired controller, the setting step is as below: Press the P button <8>, when the digit tube shows T, press the
X button once on the PlayStation 4 wired controller, the T light turns off and the setting is completed. Rapid function is enabled on the X button. To remove the rapid fire function on the X button, simply repeat the steps above. PlayStation 4 /PlayStation 3 /Xbox 360 controller -Default configuration: Connecting to Logitech G25/G27/GT/MOMO racing wheel: (1) MaxRace F-1 v.5 is compatible with Logitech G25/G27/GT/MOMO racing wheel, the PS 4 console default setting are shown below: Wheel turns right = Left Analog Stick turns right. Wheel turns left = Left Analog Stick turns left.
Wheel turns right = Left Analog Stick turns right. Wheel turns left = Left Analog Stick turns left. Wheel turns right = Left Analog Stick turns right. Wheel turns left = Left Analog Stick turns left.
To connect MaxRace F-1 v.5 to Logitech MOMO racing wheel, wait for the MOMO racing wheel to complete it s self test (clockwise and anti-clockwise for 120 degree, the wheel returns to the middle from the force feedback), press the gas pedal (RT pedal) to activate the MOMO racing wheel. (2) Custom buttons setting on the Racing wheel. The custom setting is based on your own needs to reset on different kinds of games. A: Custom setting for the gear shifter The default setting for the gear shifter is push up =, push down =, to set the push up to, the steps are shown below: First, press the program button P <8>, the digit tube shows, press the button on the PS 4 controller, the digit tube on MacRace F-1 v.5 blinks, push the stick upwards and push the shift lever back to neutral, the digit tube on MacRace F-1 v.5 turns off, the setting is completed. B:Swapping the racing wheel button functions: Logitech G25/G27/GT/MOMO racing wheel button functions (Except Guide key) can be swapped, the operating method is shown below: To swap the button on the racing wheel to the PS 4 controller X button: Press the "P" switch, the digit tube shows, then press the X button on the PS 4 controller, the digit tube shows and blinks. Press the Racing wheel button, the digit tube turns off. The setting procedure is completed and the button now contains the X button function. Pressing the button function on the racing wheel is the same as press the X button on the PS 4 controller. To restore the default function on the button, the step is shown below: 1.Press the "P" key,the digit tube shows,
2.Press the button on the PS 4 controller, the digit tube blinks, 3.Press the button again, the digit tube turns off, the button on the racing wheel has its default function restored. To set all buttons back to their original functions: Press and hold the "P" switch for 3 seconds, the digit tube shows and blinks, release the P button and all the buttons will return to their original functions. (3) Regarding to different racing games and different kinds of shifter gear setting, adjust the shifter gear digit number on MaxRace F-1 v.5 (shifter + or -) to match the gear position of the game before playing or resuming the game. (4) After connecting the MaxRace F-1 v.5 to the Logitech G25/G27 racing wheel, the default setting is set on manual control, use the gear shift (+ or -) to control the shifter gear.(push upward for a higher gear level, push downward for a lower gear level), the steps are shown below: Press and hold the M button on MaxRace F-1 v.5 for 3 seconds, wait until the digit tube shows and blinks, now release the M button, the setting is completed. The mode changes from manual control to + and mode control. Press and hold the M button on the device for 3 seconds, wait the digit tube shows and blinks, release the M button, the setting is completed. The gear shifter changes from + and mode control to manual control. MaxRace F-1 v.5 firmware can be upgraded via PC. More information can be found
on www.maxbuy.cc and www.xcm.cc