1.5A ULTRA LOW DROPOUT LINEAR REGULATOR Description The is low dropout three-terminal regulator with a typical dropout of 375mV at 1.5A output current. The provides current limit and thermal shutdown. On-chip thermal shutdown provides protection against any combination of high current and ambient temperature that would create excessive junction temperatures. The is available for 3.3V, 5.V and 12V versions now. It is available in the industry standard TO-22-3, TO-263-3, TO-252-2 (1), TO-252-2 (2), TO-252-2 (3) and TO-252-2 (4) power packages. Features Minimum Guaranteed Output Current: 1.5A Dropout Voltage: 375mV at = 1.5A Output Accuracy: 1% Low Ground Current Internal Current Limit and Thermal Protection Reversed-battery and Reversed-lead Insertion Protection Fast Transient Response Applications LCD TV Set Top Box LCD Monitor SMPS Post Regulator Laptop, Palmtop and Notebook Portable Instrumentation USB Power Supply Pin Assignments (Top View) (Top View) (Top View) 3 3 2 1 GND 2 GND 2 1 1 3 GND TO-22-3 TO-263-3 (S Package) TO-263-3 (SA Package) (Top View) (Top View) 3 3 2 GND 2 GND 1 1 TO-252-2 (1) TO-252-2 (2) (Top View) (Top View) 3 3 2 GND 2 GND 1 1 TO-252-2 (3) TO-252-2 (4) 1 of 16
Typical Applications Circuit + F 1(3) 3(2) AZ 3915 GND 2(1) + 1 F A(B) A: TO-22-3, TO-263-3 (S), TO-252-2 (1)/(2)/(3)/(4) B: TO-263-3 (SA) Pin Description TO-22-3 / TO-263-3 (S) TO-252-2 (1)/(2)/(3)/(4) Pin Number TO-263-3 (SA) Pin Name 1 3 Unregulated input. Function 2 1 GND The ground pin. This pin and TAB are internally connected. 3 2 Regulated output. Functional Block Diagram 1(3) 3(2) 1.24V 16V Reference + - Thermal Shutdown 2(1) GND A(B) A: TO-22-3, TO-263-3 (S), TO-252-2 (1)/(2)/(3)/(4) B: TO-263-3 (SA) 2 of 16
Absolute Maximum Ratings (Note 1) Symbol Parameter Rating Unit Supply Voltage 15 V T J Maximum Operating Junction Temperature +15 C T STG Storage Temperature Range -65 to +15 C T LEAD Lead Temperature (Soldering, 1sec) +3 C ESD (Machine Model) 3 V Note: 1. Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied Exposure to Absolute Maximum Ratings for extended periods may affect device reliability. Recommended Operating Conditions Symbol Parameter Min Max Unit Supply Voltage 13.2 V T J Operating Junction Temperature -4 +125 C 3 of 16
Electrical Characteristics-3.3V (Operating Conditions: = 4.3V, = 1mA, C IN = 1µF, C OUT = 1µF, T J = +25 C, unless otherwise specified. The Boldface applies over -4 C T J +125 C.) Symbol Parameter Conditions Min Typ Max Unit Output Voltage = 1mA 3.27 3.3 3.33 V 1mA 1.5A, 4.3V 8V 3.23 3.3 3.37 V V RLINE Line Regulation = 1mA, 4.3V 8V 2 17 mv V RLOAD Load Regulation = 4.3V, 1mA 1.5A 6.6 33 mv Δ/ΔT Output Voltage Temperature Coefficient = 1mA 66 33 µv/ C = 1mA 8 2 mv V DROP Dropout Voltage (Note 2) Δ = 1% = 75mA 26 mv = 1.5A 375 5 mv I GND Ground Current = 75mA, = 4.3V 4 2 ma = 1.5A, = 4.3V 17 ma I LIMIT Current Limit = V (Note 3) 2. 2.8 A I LOAD (MIN) Minimum Load Current 7 1 ma Notes: Output Noise Voltage (rms) 2. Dropout voltage is defined as the input-to-output differential when the output voltage drops to 99% of its norminal value which is measured at +1V applied to. 3. = (NOMINAL) + 1V. 1Hz to 1kHz, = 1mA, C OUT = 1µF 4 µv 4 of 16
Electrical Characteristics-5.V (Operating Conditions: = 6V, = 1mA, C IN = 1µF, C OUT = 1µF, T J = +25 C, unless otherwise specified. The Boldface applies over -4 C T J +125 C.) Symbol Parameter Conditions Min Typ Max Unit Output Voltage = 1mA 4.95 5. 5.5 V 1mA 1.5A, 6V 8V 4.9 5. 5.1 V V RLINE Line Regulation = 1mA, 6V 8V 3 25 mv V RLOAD Load Regulation = 6V, 1mA 1.5A 1 5 mv Δ/ΔT Output Voltage Temperature Coefficient = 1mA 1 5 µv/ C = 1mA 8 2 mv V DROP Dropout Voltage (Note 2) Δ = 1% = 75mA 26 mv = 1.5A 375 5 mv I GND Ground Current = 75mA, = 6V 4 2 ma = 1.5A, = 6V 17 ma I LIMIT Current Limit = V (Note 3) 2. 2.8 A I LOAD (MIN) Minimum Load Current 7 1 ma Notes: Output Noise Voltage (rms) 2. Dropout voltage is defined as the input-to-output differential when the output voltage drops to 99% of its norminal value which is measured at +1V applied to. 3. = (NOMINAL) + 1V. 1Hz to 1kHz, = 1mA, C OUT = 1µF 4 µv 5 of 16
Electrical Characteristics-12V (Operating Conditions: = 13V, = 1mA, C IN = 1µF, C OUT = 1µF, T J = +25 C, unless otherwise specified. The Boldface applies over -4 C T J +125 C.) Symbol Parameter Conditions Min Typ Max Unit Output Voltage = 1mA 11.88 12. 12.12 V 1mA 1.5A, 13V 15V 11.76 12. 12.24 V V RLINE Line Regulation = 1mA, 13V 15V 3 25 mv V RLOAD Load Regulation = 13V, 1mA 1.5A 1 5 mv Δ/ΔT Output Voltage Temperature Coefficient = 1mA 1 5 µv/ C = 1mA 8 2 mv V DROP Dropout Voltage (Note 2) Δ = 1% = 75mA 26 mv = 1.5A 375 5 mv I GND Ground Current = 75mA, = 13V 4 2 ma = 1.5A, = 13V 17 ma I LIMIT Current Limit = V (Note 3) 2. 2.8 A I LOAD (MIN) Minimum Load Current 7 1 ma Notes: Output Noise Voltage (rms) 2. Dropout voltage is defined as the input-to-output differential when the output voltage drops to 99% of its norminal value which is measured at +1V applied to. 3. = (NOMINAL) + 1V. 1Hz to 1kHz, = 1mA, C OUT = 1µF 4 µv 6 of 16
Ground Current (ma) Ground Current (ma) Ground Current (ma) Ground Current (ma) Dropout Voltage (mv) Dropout Voltage (mv) Performance Characteristics Dropout Voltage vs. Output Current Dropout Voltage vs. Temperature 5 6 45 55 4 35 3 5 45 4 35 25 2 15 1 5 25 5 75 1 125 15 Output Current (ma) =5.V 3 25 2 15 1 5-25 25 5 75 1 125 Temperature ( o C) =1.5A =5.V Ground Current vs. Output Current Ground Current vs. Supply Voltage 25. 22.5 2. 17.5 15. 12.5 1. 7.5 5. 2.5. 25 5 75 1 125 15 Output Current (ma) =6V =5.V 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1..9.8.7.6.5.4.3.2.1. 2 4 6 8 1 12 Supply Voltage (V) =5.V =1mA =1mA Ground Current vs. Supply Voltage Ground Current vs. Temperature 5.37 45 4 35 3 =5.V =75mA =1mA =15mA.36.35.34.33 =6V =5.V =1mA 25.32 2.31 15.3 1.29 5.28 2 4 6 8 1 12 Supply Voltage (V).27-25 25 5 75 1 125 Temperature ( o C) 7 of 16
Output Current Output Voltage Input Voltage Output Voltage Output Voltage (V) Output Current Output Voltage Ground Current (ma) Ground Current (ma) Performance Characteristics (Cont.) Ground Current vs. Temperature Ground Current vs. Temperature 8 2 7 6 =6V =5.V =75mA 19 18 17 =6V =5.V =1.5A 5 16 4 15 3 14 2 13 12 1 11-25 25 5 75 1 125 1-25 25 5 75 1 125 Temperature ( o C) Temperature ( o C) Output Voltage vs. Temperature Load Transient 5.5 5.4 5.3 C L = 1µF = 5.V 5.2 5.1 5. 4.99 4.98 4.97 4.96 =6V =5.V =1mA 4.95-25 25 5 75 1 125 Temperature ( o C) Load Transient Line Transient C L = 47µF = 5.V = 1mA = 5.V 8 of 16
Ordering Information X - X X X Product Name Package Output Voltage Packing E1/G1 T : TO-22-3 S/SA : TO-263-3 DA : TO-252-2 (1)/(2)/ (3)/(4) 3.3 : Fixed Output 3.3V 5. : Fixed Output 5.V 12 : Fixed Output 12V TR : Tape & Reel Blank : Tube E1 : RoHS Compliant G1 : RoHS Compliant and Green Package TO-22-3 Temperature Range -4 to +125 C RoHS Compliant T-3.3E1 T-5.E1 Part Number RoHS Compliant and Green T-3.3G1 T-5.G1 RoHS Compliant Marking ID T- 3.3E1 T- 5.E1 RoHS Packing Compliant and Green T- Tube 3.3G1 T- 5.G1 Tube TO-263-3 (S) TO-263-3 (SA) TO-252-2 (1)/(2)/(3)/(4) -4 to +125 C -4 to +125 C -4 to +125 C T-12E1 T-12E1 Tube S-3.3E1 S- 3.3G1 Tube S- 3.3G1 Tape & Reel S- 5.G1 Tube S- 5.G1 Tape & Reel S- 3.3TRE1 S-5.E1 S- 5.TRE1 S-3.3G1 S- 3.3TRG1 S-5.G1 S- 5.TRG1 S- 3.3E1 S- 3.3E1 S- 5.E1 S- 5.E1 S-12E1 S-12E1 Tube S- 12TRE1 S-12E1 Tape & Reel SA- 3.3TRG1 SA- 5.TRG1 SA- 12TRG1 DA- 3.3TRG1 DA- 5.TRG1 DA- 12TRG1 SA- 3.3G1 Tape & Reel SA- 5.G1 Tape & Reel SA- 12G1 Tape & Reel DA- 3.3G1 Tape & Reel DA- 5.G1 Tape & Reel DA- 12G1 Tape & Reel 9 of 16
Package Outline Dimensions (All dimensions in mm(inch).) (1) Package Type: TO-22-3 9. 66(. 38) 1. 66(. 42) φ3. 56(. 14) 4. 6(. 16) 2.58(.12) 3.38(.133). 55(. 22) 1. 35(. 53) 1.85(.73). 2(. 8) φ1. 5(. 59) 8.52(.335) 9.52(.375) 27.88(1.98) 3.28(1.192) 14.23(.56) 16.51(.65) 3 7 3. 56(. 14) 4. 82(. 19) 2. 8(. 82) 2. 88(. 113) 7 1. 16(. 46) 1. 76(. 69). 381(. 15) 6. 813(. 32) 8.763(.345) 6 2. 54(. 1). 381(. 15) 2. 54(. 1).356 (.14).61(.24) 1 of 16
Package Outline Dimensions (Cont. All dimensions in mm(inch).) (2) Package Type: TO-263-3 11 of 16
Package Outline Dimensions (Cont. All dimensions in mm(inch).) (3) Package Type: TO-252-2 (1) 1.35(.53) 1.65(.65) 6.45(.254) 6.65(.262) 5.2(.25) 5.4(.213).45(.18).58(.23) 2.2(.87) 2.4(.94) 4.3(.169) 5.4(.213) 9.5(.374) 9.9(.39).6(.24).9(.35) 2.3TYP 4.5(.177) 4.7(.185).(.).127(.5) 5 5.7(.28).9(.35).5(.2).7(.28) 1.4(.55) 1.78(.7) 3 4 8.45(.18).58(.23) 5.45(.215) 6.25(.246) 2.55(.1) 2.9(.114) 3.8REF(.15REF) 4.8(.189) 6.5(.256) 12 of 16
Package Outline Dimensions (Cont. All dimensions in mm(inch).) (4) Package Type: TO-252-2 (2).9(.35) 1.25(.49) 6. 5(. 256) 6. 7(. 264) 5. 23(. 26) 5. 43(. 214) 1.2±.1 4.7 REF. 47(. 19). 6(. 24) 6.(.236) 6.2(.244) 1.8REF.6(.24) 1.(.39) 1.15(.45) 1.5(.59) 5.25REF 9.8(.386) 1.4(.49) 3 7 2.9REF 3 7. 9(. 35) 1.1(. 43) 3 7 1.4(.55) 1.7(.67) 8 2.2(.87) 2.38(.94).77(. 3) 1.1(. 433) 2.28BSC 1 5. 77(. 3). 89(. 35) 13 of 16
Package Outline Dimensions (Cont. All dimensions in mm(inch).) (5) Package Type: TO-252-2 (3) 6.(.236) 6.2(.244).9(.35) 1.25(.49) 1.8REF.72(.28).9(. 35) 2.286(. 9) BSC 6.5(. 256) 6.7(. 264) 5.13(.22) 5.46(.215) 5 9.15(.6).75(.3) 1.29±.1 Option 1.72(.28).85(.33).6(.24) 1.(.39) 4.7REF 5.25REF 9.8(.386) 1.4(.49) 2.9REF 8 1.4(.55) 1.7(.67) 8.47(.19).6(.24) 5 9.9(.35) 1.1(.43) 3 7 2.2(.87) 2.38(.94) Option 2 14 of 16
Package Outline Dimensions (Cont. All dimensions in mm(inch).) (6) Package Type: TO-252-2 (4) 6.35(.25) 6.73(.265) 4.96(.195) 5.46(.215).89(.35) 1.27(.5) 2.18(.86) 2.38(.94).46(.18).6(.24) 4.32(.17) MIN 2.16(.85) MIN 1.2±.5 1.7(.67) 1.9(.75) 5.97(.235) 6.22(.245) 15 1.145(.45) 1.492(.59) 9.94(.391) 1.34(.47) 5.21(.25) MIN.765(.3) 1.124(.44) 2.29(.9) BSC.64(.25).884(.35) 3 3 1.1(.4) MAX DETAIL A.46(.18).61(.24).65(.26).78(.31) PLATING.41(.16).56(.22) BASE METAL.64(.25).884(.35) SECTION B-B GAUGE PLANE B 1.5(.59) 1.78(.7) 1 B 2.74(.18) REF.2(.1).12(.5) SEATING PLANE 15 of 16
IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright 218, Diodes Incorporated 16 of 16