AH920. Pin Assignments. Description. Features. Applications. Typical Applications Circuit. A Product Line of Diodes Incorporated
|
|
- Mitchell Myron Shields
- 5 years ago
- Views:
Transcription
1 HIGH SENSITIVITY CMOS HALL-EFFECT LATCH Description The is a Hall-effect latch designed in mixed signal CMOS technology. It is quite suitable for use in automotive, industrial and consumer applications. Pin Assignments (Front View) 3 OUT Superior high-temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress. The device integrates a voltage regulator, Hallvoltage generator, small-signal amplifier, chopper stabilization, schmitt trigger, and open-drain output. 2 1 TO-92S-3 (Top View) An on-board regulator permits operation with supply voltage from 3.5V to 20V. 3 The is available in TO-92S-3 and SOT-23-3 packages, which are optimized for most applications. Features 1 2 OUT Wide Operating Voltage Range from 3.5V to 20V Symmetrical Switch Points Chopper-stabilized Amplifier Stage Superior Temperature Stability Open-drain Output Wide Operating Temperature Range: -40ºC to +125ºC ESD Rating: 6000V (Human Body Model) Totally Lead-free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Applications SOT-23-3 Brushless DC Motor Commutation Brushless DC Fan Solid-state Switch Revolution Counting Speed Detection High Sensitivity and Unconnected Switch Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See for more information about s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. Typical Applications Circuit 1 OUT R L C L 0.1mF Output OUT R L Output 2 C L 0.1mF 1 of 14
2 Pin Descriptions TO-92S-3 Pin Number SOT-23-3 Pin Name Function 1 1 Supply voltage 2 3 Ground pin 3 2 OUT Output Pin Functional Block Diagram 1 (1) 3 (2) OUT Reference Voltage Hall Sense Chopper Switch AMP 2 (3) A (B) A for TO-92S-3 B for SOT of 14
3 Absolute Maximum Ratings (Note 4) Symbol Parameter Rating Unit Supply Voltage 20 V I CC Supply Current (Fault) 5 ma I OUT Output Current (Continuous) 25 ma P D Power Dissipation TO-92S SOT mw T A Operation Temperature -50 to +150 ºC T STG Storage Temperature -65 to +150 ºC T J (Max) Maximum Junction Temperature +165 ºC ESD ESD (Human Body Model) 6000 V Note 4: Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to Absolute Maximum Ratings for extended periods may affect device reliability. Recommended Operating Conditions Symbol Parameter Min Max Unit Supply Voltage V T A Operating Ambient Temperature ºC Electrical Characteristics (@ =12V, T A =+25 C, unless otherwise specified. Notes 5 & 6 ) Symbol Parameter Conditions Min Typ Max Unit I CC V SAT Supply Current Saturation Voltage B<B RP ma B>B OP =3.5V, I OUT=5mA, B>B OP (Note 7) mv I OUT=20mA, B>B OP (Note 7) mv =20V, I OUT=20mA, B>B OP (Note 7) mv I LEAKAGE Output Leakage Current V OUT=20V, B<B RP (Note 8) μa t RISING Output Rising Time R L=1kΩ,C L=20pF μs t FALLING Output Falling Time R L=1kΩ,C L=20pF μs Notes: 5. Output initial status is low when powering on. 6. The supply current I CC represents the average supply current. The output is open during measurement. 7. The device is put under the magnetic field: B>B OP. 8. The device is put under the magnetic field: B<B RP. 3 of 14
4 Magnetic Characteristics T A=+25 C, unless otherwise specified.) Symbol Parameter Min Typ Max Unit B OP Operating Point Gauss B RP Releasing Point Gauss B HYS Hysteresis 45 Gauss V OUT V OUT High V d V d High B HYS B HYS V SAT N B RP 0 B OP S Low Low N B RP B OP VSAT 0 S For TO-92S-3 For SOT-23-3 Figure 1. Magnetic Flux Density of 4 of 14
5 Magnetic Characteristics (Cont.) South Pole North Pole Output=Low (For TO-92S-3) Output=High (For TO-92S-3) South Pole North Pole Output=High (For SOT-23-3) Output=Low (For SOT-23-3) Figure 2. Output Status vs. Magnetic Pole Package Type Parameter Test Condition Output TO-92S-3 SOT-23-3 South Pole B>B OP Low North Pole B<B RP High South Pole B>B OP High North Pole B<B RP Low Table 1. Output Status vs. Magnetic Pole 5 of 14
6 Magnetic Characteristics (Cont.) 10k DC OUT V Figure 3. Magnetic Thresholds Test Circuit and Test Conditions 1 R L OUT C L 20pF Output 2 Figure 4. Test Circuit of 6 of 14
7 Test Circuit and Test Conditions (Cont.) DC I CC A OUT Output Figure 5. Test Condition of (Supply Current) DC 3.5/20V OUT 20mA Output V V SAT Figure 6. Test Condition of (Output Saturation Voltage) 7 of 14
8 I CC (ma) A Product Line of Test Circuit and Test Conditions (Cont.) DC 12V I CC (ma) OUT I OFF A DC 20V Figure 7. Test Condition of (Output Leakage Current) Performance Characteristics I CC vs. I CC vs. T A =5V =12V T A =25 O C (V) T A ( O C) 8 of 14
9 P D (mw) V SAT (mv) V SAT (mv) B OP /B RP /B HYS (Gauss) B OP /B RP /B HYS (Gauss) A Product Line of Performance Characteristics (Cont.) B OP/B RP/B HYS vs. B OP/B RP/B HYS vs. T A B OP 0 B RP B HYS 0 B OP B RP -10 T A =25 O C -10 B HYS =12V (V) T A ( O C) V SAT vs. I OUT V SAT vs. T A I OUT (ma) T A =25 O C =12V =5V =12V T A ( O C) P D vs. T A SOT-23-3 TO-92S T A ( O C) 9 of 14
10 Ordering Information XX XX - XX Product Name Package Packing RoHS/Green Z3 : TO-92S-3 N : SOT-23-3 TR : Tape & Reel Blank : Bulk G1 : Green Package Temperature Range Part Number Marking ID Packing TO-92S-3-40 to +125 C Z3-G /Bulk SOT to +125 C NTR-G1 GS7 3000/Tape & Reel Marking Information TO-92S-3 (Front View) First Line: Logo and Marking ID Second Line: Date Code Y: Year WW: Work Week of Molding A: Assembly House Code XX: 7 th and 8 th Digits of Batch No. SOT-23-3 (Top View) : Logo GS7: Marking ID 10 of 14
11 Package Outline Dimensions (All dimensions in mm(inch).) (1) Package Type: TO-92S (0.030) TYP 1.420(0.056) 1.620(0.064) 1.850(0.073) 2.150(0.085) 3.850(0.152) 4.150(0.163) 1.200(0.047) 1.500(0.059) Package Sensor Location 2.900(0.114) 3.310(0.130) 0.380(0.015) 0.550(0.022) 1.600(0.063) TYP (0.551) (0.610) 0.360(0.014) 0.480(0.019) 1.270(0.050) TYP 0.360(0.014) 0.510(0.020) 11 of 14
12 Package Outline Dimensions (All dimensions in mm(inch). Cont.) (2) Package Type: SOT (0. 111) 3.100(0. 122) 0.100(0. 004) 0.200(0. 008) 2.650(0.104) 3.000(0.118) Package Sensor Location 1.230(0.048) 1.530(0.060) 1.500(0.059) 1.700(0.067) 0.300(0.012) 0.600(0.024) (0.008) Die 0.950(0. 037) TYP 1.800(0.071) 2.000(0.079) 0.770(0. 030) 1.070(0. 042) (0.012) (0.020) 0 8 A (0.057) MAX (0. 035) 1.300(0. 051) 0.000(0.000) 0.150(0.006) Symbol Option 1 Option 2 A4 min(mm) max(mm) min(inch) max(inch) of 14
13 Suggested Pad Layout (1) Package Type: SOT-23-3 X G E1 Z E2 Y Dimensions Z (mm)/(inch) G (mm)/(inch) X (mm)/(inch) Y (mm)/(inch) E1 (mm)/(inch) E2 (mm)/(inch) Value 3.600/ / / / / / of 14
14 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. does not assume any liability arising out of the application or use of this document or any product described herein; neither does convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold and all the companies whose products are represented on website, harmless against all damages. does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use products for any unintended or unauthorized application, Customers shall indemnify and hold and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by. LIFE SUPPORT products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by. Further, Customers must fully indemnify and its representatives against any damages arising out of the use of products in such safety-critical, life support devices or systems. Copyright 2014, 14 of 14
PART OBSOLETE USE AH3774. Applications
PART OBSOLETE USE AH3774 HIGH SENSITIVITY HALL EFFECT LATCH Description Pin Assignments The is an integrated Hall effect latched sensor designed for electronic commutation of brush-less DC motor applications.
More informationAH9250. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH AH9250 TO92S SC59
HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description Pin Assignments The is a high sensitivity Hall-effect switch with internal pull-up resistor on the output, designed for battery operated
More informationAH3373. Description. Pin Assignments NEW PRODUCT. Applications. Features HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT UNIPOLAR SWITCH AH3373
HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT UNIPOLAR SWITCH Description The is a high voltage high sensitivity Hall Effect Unipolar switch IC designed for proximity, position and level sensing in industrial
More informationAP4305. Description. Pin Assignments. Features. Applications. Typical Applications Circuit AP4305. A Product Line of. Diodes Incorporated
CONSTANT OLTAGE AND CONSTANT CURRENT CONTROLLER Description Pin Assignments The is a highly integrated solution for a constant voltage/constant current mode SMPS application. (Top iew) The contains one
More informationAH3574. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT OMNIPOLAR SWITCH 3 OUTPUT GND 2
HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT OMNIPOLAR SWITCH Description The is a high voltage high sensitivity Hall Effect Omnipolar switch IC designed for proximity, position and level sensing in consumer
More informationAN431. Pin Assignments. Description. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
ADJUSTABLE PRECISION SHUNT REGULATORS Description The series ICs are three-terminal adjustable shunt regulators with guaranteed thermal stability over a full operation range. These ICs feature sharp turn-on
More informationAP4310A. Pin Assignments. Description. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
DUAL OP AMP AND VOLTAGE REFERENCE Description The is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies Pin Assignments
More informationAP4320. Description. Pin Assignments. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
CONSTANT OLTAGE AND CONSTANT CURRENT CONTROLLER Description The is a highly integrated solution for a constant voltage/constant current mode SMPS application. Pin Assignments (Top iew) The contains one.
More informationAP4312Q. Pin Assignments. Description NEW PRODUCT. Applications. Features CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER AP4312Q SOT26
CONSTANT OLTAGE AND CONSTANT CURRENT CONTROLLER Description Pin Assignments is an Automotive Grade product that is AEC-Q1 grade 1 qualified. It is a highly integrated solution for the constant voltage/constant
More informationAH1815. Description. Pin Assignments. Features. Applications LOW SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH AH1815 SC59 SOT553 SIP-3
LOW SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description Pin Assignments The is a low-sensitivity, micro-power Omnipolar Hall effect switch IC, designed for portable and battery powered consumer
More informationAH1812. Description. Pin Assignments NEW PRODUCT. Applications. Features. Typical Applications Circuit (Note 4) OUTPUT V DD GND 2
HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description Pin Assignments The is a high sensitivity micropower Omnipolar Hall effect switch IC with an open drain output. Designed for portable
More informationAS431H. Description. Pin Assignments NEW PRODUCT. Features. Applications ADJUSTABLE PRECISION SHUNT REGULATORS AS431H ANODE CATHODE ANODE CATHODE REF
ADJUSTABLE PRECISION SHUNT REGULATORS Description Pin Assignments The is a three-terminal adjustable shunt regulator with guaranteed thermal stability over a full operation range. It features sharp turn-on
More informationAH3368Q. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH VOLTGAE LOW SENSITIVITY AUTOMOTIVE HALL EFFECT UNIPOLAR SWITCH AH3368Q
Description The is an AECQ100 qualified high voltage low sensitivity Hall Effect Unipolar switch IC designed for position and proximity sensing in automotive applications such as in seat and seatbelt buckle,
More informationAH1911/AH1921. Description. Pin Assignments NEW PRODUCT. Features. Applications. Typical Applications Circuit (Note 4) 2 OUTPUT GND 3 1 VDD
ULTRA-LOW POWER DIGITAL OMNIPLOAR HALL-EFFECT SWITCH Description Pin Assignments The is an ultra-low power digital Omnipolar Hall Effect switch IC from Diodes broad Hall Effect switches family. Thanks
More informationAS339/339A. Description. Pin Assignments. Features. Applications LOW POWER LOW OFFSET VOLTAGE QUAD COMPARATORS AS339/339A
LOW POWER LOW OFFSET VOLTAGE QUAD COMPARATORS Description Pin Assignments The consist of four independent precision voltage comparators with a typical offset voltage of 2.0mV and high gain. They are specifically
More informationAP3409/A. Description. Pin Assignments. Features. Applications. A Product Line of. Diodes Incorporated
3A, 4MHz HIGH EFFICIENCY SYNCHRONOUS BUCK CONVERTER Description Pin Assignments The is a current mode, PWM synchronous buck DC/DC converter, capable of driving a 3A load with high efficiency, excellent
More informationAP1688. Description. Features NEW PRODUCT. Pin Assignments. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
AC/DC, HIGH PF, HIGH EFFICIENCY, UNIVERSAL MAINS LED DRIVER CONTROLLER Description The is a high performance AC/DC PFC and constant current controller for universal mains LED driver applications. The device
More informationAP4340S. Description. Pin Assignments NEW PRODUCT. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
DYNAMIC PSR ACCELERATOR Description Pin Assignments The is an output voltage detector for Primary Side Control System. It is a low power loss solution. It detects the output voltage and provides a periodical
More informationAP2138/2139. Features. Description ADVANCED INFORMATION. Applications. Pin Assignments ULTRA LOW QUIESCENT CURRENT CMOS LDO AP2138/2139 GND V OUT V IN
ULTRA LOW QUIESCENT CURRENT CMOS LDO Description The series are CMOS-based positive voltage regulator ICs. Each of these ICs consists of a voltage reference, an error amplifier, a resistor network for
More informationAP2132. Description. Pin Assignments. Features. Applications. A Product Line of. Diodes Incorporated 2A CMOS LDO REGULATOR AP2132.
2A CMOS LDO REGULATOR Description Pin Assignments The series are positive voltage regulator ICs fabricated by CMOS process. The ICs consist of a voltage reference, an error amplifier, a power transistor,
More informationFeatures TO-220F-3 TO (2) TO-263-2
HIGH VOLTAGE POWER SCHOTTKY RECTIFIER Product Summary V RRM (V) I O (A) V F (MAX) (V) I R (MAX) (ma) @ +25 C @ +25 C 100 2x10 0.85 0.1 Description High voltage dual Schottky rectifier suited for switch
More informationV CC RESET. Applications
MICRO POWER VOLTAGE DETECTOR Description Pin Assignments The is brand new micro-power voltage detector series developed by Diodes Inc. with target to be used for microprocessor (µp) supervisory circuits
More informationAS393/393A. Description. Pin Assignments. Features. Applications. Typical Applications Circuit LOW POWER LOW OFFSET VOLTAGE DUAL COMPARATORS
LOW POWER LOW OFFSET VOLTAGE DUAL COMPARATORS Description Pin Assignments The consist of two independent precision voltage comparators with a typical offset voltage of 1.0mV and high gain. They are specifically
More informationNOT RECOMMENDED FOR NEW DESIGN USE AH3377. Applications
USE 7 SIGLE PHASE HALL EFFECT SWITCH Description is a unipolar Hall-Effect sensor for contactless switching applications. The device includes an on-chip Hall voltage generator for magnetic sensing, an
More informationAP431i. Description. Features NEW PRODUCT. Applications. Pin Assignments. A Product Line of. Diodes Incorporated
Description The is a 3-terminal adjustable shunt regulator with guaranteed thermal stability over a full operation range. It features sharp turn-on characteristics, low temperature coefficient and low
More informationPART OBSOLETE - NO ALTERNATE PART Green. Features DO-214AA
Green LOW VOLTAGE POWER SCHOTTKY RECTIFIER Product Summary V RRM (V) I O (A) V F (MAX) (V) I R (MAX) (ma) @ +25 C @ +25 C 40 5 0.55 0.1 Description Low voltage Schottky rectifier suited for switch mode
More informationFeatures. Applications
Description LOW CATHODE CUREENT ADJUSTABLE PRECISION SHUNT REGULATOR Features The is a three-terminal adjustable shunt regulator with guaranteed thermal stability over a full operation range. It features
More informationApplications. Monitor TV STB Datacom
18V, 3A SYNCHRONOUS DC-DC BUCK CONVERTER Description Pin Assignments The is a 500kHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converter, capable of driving a 3A load with high
More informationGreen. Features DO-214AC
Green SCHOTTKY BARRIER RECTIFIERS Product Summary V RRM (V) I O (A) V F (MAX) (V) I R (MAX) (ma) @ +25 C @ +25 C 40 3 0.5 0.5 Description The is a low voltage dual Schottky rectifier suited for switch
More informationFeatures. TO-220F-3 (Option 1) TO (2) TO TO (1)
HIGH VOLTAGE POWER SCHOTTKY RECTIFIER Product Summary Features V F (MAX) (V) I R (MAX) (ma) V RRM (V) I O (A) @ +25 C @ +25 C 200 2x5 0.95 0.5 Description High voltage dual Schottky rectifier suited for
More informationAH3363Q. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT UNIPOLAR SWITCH AH3363Q
Description The is an AEC100 qualified high voltage high sensitivity Hall Effect Unipolar switch IC designed for position and proximity sensing in automotive applications such as in seat and seatbelt buckle,
More informationFeatures DO-15 DO-214AC SOD-123
SCHOTTKY BARRIER RECTIFIERS Product Summary Features V RRM (V) I O (A) V F (MAX) (V) I R (MAX) (ma) @ +25 C @ +25 C 40 2 0.5 0.5 Description The is a low voltage dual Schottky rectifier suited for switch
More informationAZ1117I. Description. Pin Assignments NEW PRODUCT. Features Applications LOW DROPOUT LINEAR REGULATOR WITH INDUSTRIAL TEMPERATURE RANGE AZ1117I
LOW DROPOUT LINEAR REGULATOR WITH INDUSTRIAL TEMPERATURE RANGE Description Pin Assignments The is available in industrial temperature range low dropout three-terminal regulator. (Top View) The is optimized
More informationAZ2940. Description. Features. Applications. Pin Assignments. A Product Line of. Diodes Incorporated 1A ULTRA LOW DROPOUT LINEAR REGULATOR AZ2940
1A ULTRA LOW DROPOUT LINEAR REGULATOR Description The is a low dropout three-terminal regulator with a typical dropout of 280mV at 1A output current. The provides current limit and thermal shutdown. On-chip
More informationSBR5E45P5. Features and Benefits. Product Summary A = +25 C) Description and Applications. Mechanical Data. Ordering Information (Note 4)
Green 5A SBR SUPER BARRIER RECTIFIER Product Summary (@T A = +25 C) Features and Benefits ADVANCED NEW NEW INFORMATION V RRM (V) I O (A) V F(MAX) (V) I R(MAX) (ma) 45 5 0.6 0.28 Description and Applications
More informationAH5794 SINGLE PHASE HALL EFFECT LATCH FAN MOTOR DRIVER. Description. Pin Assignments NEW PRODUCT. Applications. Features. (Top View) O2 3 V SS TSOT26
Description Pin Assignments The is a single chip solution for driving single-coil brushless direct current (BLDC) fans and motors. The integrated full-bridge driver output stage uses soft switching to
More informationAH3562Q. Description. Pin Assignments. Applications. Features HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT OMNIPOLAR SWITCH 3 OUTPUT GND 2
HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT OMNIPOLAR SWITCH Description The is an AECQ100-qualified high-voltage, high-sensitivity Hall effect omnipolar switch IC designed for position and proximity
More informationFeatures. Applications
5A LOW DROPOUT LINEAR REGULATOR Description Features The is a series of low dropout positive voltage regulators with a maximum dropout of.5v at 5A of load current. The series features on-chip thermal limiting
More informationAH1893. Pin Assignments. Description NEW PRODUCT. Features. Applications. Typical Applications Circuit
HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description Pin Assignments The is a high sensitivity micropower Omnipolar Hall effect switch IC with internal pull up and pull down capability.
More informationAZ1085C. Features. Description. Applications. Pin Assignments. A Product Line of. Diodes Incorporated 3A LOW DROPOUT LINEAR REGULATOR AZ1085C INPUT
A LOW DROPOUT LINEAR REGULATOR Description Features The is a series of low dropout positive voltage regulators with a maximum dropout of.5v at A of load current. The series features on-chip thermal shutdown.
More informationApplications AP7350 GND
150mA ULTRA-LOW QUIESCENT CURRENT LDO with ENABLE Description The is a low dropout regulator with high output voltage accuracy. The includes a voltage reference, error amplifier, current limit circuit
More informationFeatures. Applications
WIDE INPUT VOLTAGE RANGE, 150mA ULDO REGULATOR Description The series is a positive voltage regulator IC fabricated by high voltage EPNP process. The has features of wide input voltage range, high accuracy,
More informationFeatures DO-41 DO-15 DO-214AC
SCHOTTKY BARRIER RECTIFIERS Product Summary V RRM (V) I O (A) V F (MAX) (V) I R (MAX) (ma) @ +25 C @ +25 C 60 2 0.68 0.5 Description The is a low voltage dual Schottky rectifier suited for switch mode
More informationAZV831/2. Description. Pin Assignments NEW PRODUCT. Features. Applications
SINGLE/DUAL LOW BIAS CURRENT, LOW VOLTAGE, RAIL-TO-RAIL INPUT/OUTPUT CMOS OPERATIONAL AMPLIFIERS Description Pin Assignments The AZV83/AZV832 is single/dual channels rail-to-rail input and output amplifier,
More informationATS137. General Description. Features. Applications. Typical Application Circuit 3.5V ~20V ATS137 SINGLE HALL EFFECT SWITCH. V cc. Digital Output GND
Features General Description 3.5V to 20V DC Operation Voltage Temperature Compensation Wide Operating Voltage Range Open-Collector Pre-Driver 25mA Maximum Sinking Output Current Reverse Polarity Protection
More informationAH X G - X - A. Tube/Bulk 7 Tape and Reel Ammo Box Part Part Number Suffix Suffix
Features General Description Bipolar Hall Effect Latch Sensor 3.5V to 20V DC Operation Voltage Open Collector Pre-Driver 50mA Output Sink Current Chip Power Reverse-Connection Protection Operating Temperature:
More informationAP7384. Description. Pin Assignments. Features NEW PRODUCT. Applications. Typical Applications Circuit. WIDE INPUT VOLTAGE RANGE, 50mA ULDO REGULATOR
WIDE INPUT VOLTAGE RANGE, 50mA ULDO REGULATOR Description Pin Assignments The series is a positive voltage regulator IC. (Top View) The has features of wide input voltage range, high accuracy, low dropout
More informationAH287. General Description. Features. Typical Application Circuit HIGH VOLTAGE HALL-EFFECT SMART FAN MOTOR CONTROLLER. 24V Brush-Less DC Fan
Features General Description On Chip Hall Sensor Rotor-Locked Shutdown Automatically Restart Built-in Zener Protection for Output Driver Operating Voltage: 3.8V~28V Output Current: I O(AVE) = 400mA Lead
More informationAP1506. Description. Pin Assignments. Features. Applications. 150kHz, 3A PWM BUCK DC/DC CONVERTER AP SD 4 FB 3 GND 2 Output
150kHz, 3A PWM BUCK DC/DC CONVERTER Description The series are monolithic IC designed for a step-down DC/DC converter, and own the ability of driving a 3A load without external transistor. Due to reducing
More informationGreen. Case Material: Molded Plastic. UL Flammability Classification 3.3V - 200V Nominal Zener Voltage Range
Green 3.W SURFACE MOUNT POWER ENER DIODE Features Mechanical Data 3.W Power Dissipation Case: SMB Ideally Suited for Automated Assembly Case Material: Molded Plastic. UL Flammability Classification 3.3V
More informationAP431i. Pin Assignments. Description. Features. Applications LOW CATHODE CUREENT ADJUSTABLE PRECISION SHUNT REGULATOR. AP431i
LOW CATHODE CUREENT ADJUSTABLE PRECISION SHUNT REGULATOR Description The is a 3-terminal adjustable shunt regulator with guaranteed thermal stability over a full operation range. It features sharp turn-on
More informationAL5816Q. Description. Pin Assignments. Applications. Features VCC PWM GND AUTOMOTIVE COMPLIANT 60V LINEAR LED CONTROLLER AL5816Q
AUTOMOTIVE COMPLIANT 60V LINEAR LED CONTROLLER Description Pin Assignments The is a 5-terminal adjustable constant current linear LED controller offering excellent temperature stability and current (Top
More informationBattery-powered Equipment Laptop, Palmtops, Notebook Computers Portable Information Appliances SOT25 (WR Package)
WIDE INPUT VOLTAGE RANGE, 150mA ULDO REGULATOR Description Pin Assignments The series is a positive voltage regulator IC. (Top View) The has features of wide input voltage range, high accuracy, low dropout
More informationAH175 HALL EFFECT LATCH FOR HIGH TEMPERATURE. Description. Pin Assignments. Features Applications. Typical Application Circuit.
Description Pin Assignments is a single-digital-output Hall-Effect latch sensor for high temperature operation. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier
More informationFeatures. Part Number Marking Reel Size (inches) Tape Width (mm) Quantity Per Reel DGD2101MS8-13 DGD ,500
HIGH-SIDE AND LOW-SIDE GATE DRIVER IN SO-8 (Type TH) Description The is a high-voltage / high-speed gate driver capable of driving N-Channel MOSFETs and IGBTs in a high-side/low-side configuration. High-voltage
More informationAH1898. Description. Pin Assignments NEW PRODUCT. Applications. Features PROGRAMMABLE MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH U-WLB AH1898
PROGRAMMABLE MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description Pin Assignments The is a micropower magnetic range selectable (Bop/Brp) Omnipolar Hall effect switch IC with internal pull up and pull down
More informationFeatures. Product Marking Reel Size (inch) Tape Width (mm) Quantity per Reel DGD2103MS8-13 DGD2103M ,500
HALF-BRIDGE GATE DRIVER IN SO-8 Description The is a high-voltage / high-speed gate driver capable of driving N-channel MOSFETs and IGBTs in a half-bridge configuration. High voltage processing techniques
More informationFeatures. Product Marking Reel Size (inches) Tape Width (mm) Quantity per Reel DGD2304S8-13 DGD ,500
HALF-BRIDGE GATE DRIVER IN SO-8 Description Features The is a high voltage / high speed gate driver capable of driving N-channel MOSFETs and IGBTs in a half bridge configuration. High voltage processing
More informationAH5792 SINGLE PHASE HALL EFFECT LATCH SMART FAN MOTOR CONTROLLER. Description. Pin Assignments. Features. Applications
Description Pin Assignments The is a single chip solution for driving single-coil brush-less DC fans and motors. The employs a bidirectional full bridge driver output stage for single coil fan motor applications.
More informationSINGLE PHASE HALL EFFECT LATCH SMART FAN MOTOR CONTROLLER
Description Pin Assignments The is a single chip solution for driving single-coil brushless direct current (BLDC) fans and motors. The integrated full-bridge driver output stage uses soft switching to
More information( Top View ) OUT1 OUT2 OUT3 OUT4 IN1 IN2 IN3 IN4 IN5 IN6 OUT5 OUT6 OUT7 GND COM ULN2003V12, ULN2003F12. Description. Pin Assignments.
Multi-Channel Relay and Inductive Load Sink Driver Description Pin Assignments The ULN2003V2 and ULN2003F2 are multi-channel sink drivers comprised of 7-channel and 4-channel output stages respectively.
More information74HCT138. Description. Pin Assignments. Features. Applications 3 TO 8 LINE DECODER DEMULTIPLEXER 74HCT138
3 TO 8 LINE DECODER DEMULTIPLEXER Description Pin Assignments The is a high speed CMOS device that is designed to be pin compatable with 74LS low power Schottky types. The device accepts a three bit binary
More informationGreen. Bottom View. Top View. Part Number Compliance Case Packaging SDT3A45SA-13 Commercial SMA 5,000/Tape & Reel
Green 3A TRENCH SCHOTTKY BARRIER RECTIFIER SMA Product Summary (@ T A = +25 C ) V RRM (V) I O (A) V F(MAX) (mv) I R(MAX) (µa) 45 3 480 280 Features and Benefits Low Leakage Current Soft, Fast Switching
More informationZXCT1009Q. Pin Assignments. Description. Features. Applications. Typical Application Circuit. A Product Line of. Diodes Incorporated
AUTOMOTIVE GRADE MICROPOWER CURRENT MONITOR Description The is a micropower high side current sense monitor. This device eliminates the need to disrupt the ground plane when sensing a load current. Pin
More informationPart Number Case Packaging DMN2990UFO-7B X2-DFN k/Tape & Reel
20V N-CHANNEL ENHANCEMENT MODE MOSFET Product Summary Features and Benefits BV DSS 20V R DS(ON) max I D max T A = +25 C 0.99Ω @ V GS = 4.5V 750mA.2Ω @ V GS = 2.5V 680mA.8Ω @ V GS =.8V 555mA 2.4Ω @ V GS
More informationFeatures. Product Marking Reel Size (inches) Tape Width (mm) Quantity per Reel DGD21844S14-13 DGD ,500
HALF- BRIDGE GATE DRIVER IN SO-14 Description The is a high voltage / high speed gate driver capable of driving N-Channel MOSFETs and IGBTs in a half bridge configuration. High voltage processing techniques
More informationAP3211. Pin Assignments. Description. Features. Applications. Typical Applications Circuit V IN =12V. C B 10nF 25V. L1 4.7mH V OUT =3.3V (1.
1.4MHZ,1.5A ASYNCHRONOUS DC-DC BUCK CONVERTER Description The is a 1.4MHz fixed frequency, current mode, PWM buck (step-down) DC-DC converter, capable of driving a 1.5A load with high efficiency, excellent
More informationAL5811. Description. Pin Assignments. Features. Applications. Typical Applications Circuit. (Top View) V CC LED GND R SET 3 U-DFN
6V, LINEAR 75mA ADJUSTABLE CURRENT LED DRIVER Description Pin Assignments The is a Linear LED driver with an adjustable LED current up to 75mA offering excellent temperature stability and output handling
More informationB3XXAE B320AE-B345AE. Product Summary. Features and Benefits. Mechanical Data. Description and Applications NEW PRODUCT. Ordering Information (Note 4)
Green 3.0A SCHOTTKY BARRIER RECTIFIER Product Summary B320AE/B330AE/B340AE/B345AE V RRM (V) I O (A) V F(MAX) (V) I R(MAX) (ma) @ +25 C @ +25 C 20 3 0.5 0. 30 3 0.5 0.15 40 3 0.5 0.20 45 3 0.5 0.30 Features
More informationGreen T-DFN Part Number Compliance Case Packaging LBS10-13 Commercial T-DFN ,000/Tape & Reel
Green 1.0A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Product Summary (@ T A = +25 C) V RRM (V) I O (A) V F Max (V) I R Max (µa) 1000 1 1.1 5 Description and Applications The is a surface mount glass
More information(Top View) MSOP-8 packages, the AS358A is available in DIP-8 and SOIC-8 packages and AS358B is available in TSSOP-8 package.
LOW POWER DUAL OPERATIONAL AMPLIFIERS Description Pin Assignments The consists of two independent, high gain and (Top View) internally frequency compensated operational amplifiers, they are specifically
More informationAH1892 PROGRAMMABLE MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH. Pin Assignments. Description NEW PRODUCT. Features.
Description Pin Assignments The is a micropower magnetic range selectable (Bop/Brp) Omnipolar Hall effect switch IC with internal pull up and pull down capability, designed for consumer equipment ranging
More informationPackage Pin Out Configuration. Part Number Compliance Marking Reel Size (inch) Tape Width (mm) Quantity per Reel UMC4NQ-7 Automotive NP ,000
YM DUAL COMPLEMENTARY PRE-BIASED TRANSISTORS Features Ultra-Small Surface Mount Package Surface Mount Package Suited for Automated Assembly Simplifies Circuit Design and Reduces Board Space Totally Lead-Free
More informationZTL431AQ, ZTL431BQ ZTL432AQ, ZTL432BQ. Pin Assignments. Description. Features. Typical Application. Applications
AUTOMOTIVE COMPLIANT ADJUSTABLE PRECISION SHUNT REGULATOR Description The ZTL431AQ, ZTL431BQ, ZTL432AQ and ZTL432BQ are three terminal adjustable shunt regulators offering excellent temperature stability
More informationDevice Symbol. Part Number Compliance Marking Reel Size (inches) Tape Width (mm) Quantity Per Reel BC846ASQ-7-F Automotive KNS 7 8 3,000
KNS YM 65V DUAL NPN SMALL SIGNAL TRANSISTOR Description Mechanical Data This Bipolar Junction Transistor (BJT) is designed to meet the stringent requirements of Automotive Applications. Features BV CEO
More informationFeatures SOT363. Top View. Part Number Case Packaging DMN2004DWK-7 SOT363 3,000/Tape & Reel
NAB YM DUAL N-CHANNEL ENHANCEMENT MODE MOSFET Product Summary R DS(ON) max I D T A = +25 C 2V.55Ω @ V GS = 4.5V 54mA BV DSS Description and Applications This MOSFET is designed to minimize the on-state
More informationGreen. Top View Pin Diagram Internal Schematic. Part Number Case Packaging MSB12M-13 MSB 3,000/Tape & Reel
Green.2A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Product Summary (@T A = +25 C) V RRM (V) I O (A) V F (V) I R (µa),000.2. 5 Features and Benefits Glass Passivated Die Construction Compact, Thin
More informationGreen. Pin Diagram. Part Number Compliance Case Packaging MSB30M-13 Commercial MSBL 2,500/Tape & Reel
Green 3.0A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Product Summary (@T A = +25 C) V RRM (V) I O (A) V F (V) I R (μa) 1000 3.0 1.1 5 Features and Benefits Glass Passivated Die Construction Compact,
More informationGreen. Part Number Case Packaging SBRT3U60SAF-13 SMAF 10,000/Tape & Reel
Green 3A Trench SBR TRENCH SUPER BARRIER RECTIFIER Product Summary V V RRM (V) I O (A) F(MAX) (V) I R(MAX) (ma) @ +25 C @ +25 C 60 3 0.53 0.5 Description and Applications The device is a 3A 60V single
More informationFeatures. Part Number Marking Reel Size (inches) Tape Width (mm) Quantity per Reel DGD2005S8-13 DGD
HIGH-SIDE AND LOW-SIDE GATE DRIVER IN SO-8 Description The is a mid-voltage/high-speed gate driver capable of driving N-channel MOSFETs in a half-bridge configuration. Highvoltage processing techniques
More informationFeatures. Drain SOT23 D. Gate. Source. Part Number Case Packaging DMG3414UQ-7 SOT23 3,000/Tape & Reel DMG3414UQ-13 SOT23 10,000/Tape & Reel
N-CHANNEL ENHANCEMENT MODE MOSFET Product Summary Features V (BR)DSS 2V Description R DS(ON) max 25mΩ @ V GS = 4.5V I D max T A = +25 C 9A 29mΩ @ V GS = 2.5V 5.5A 37mΩ @ V GS = 1.8V 4.8A This MOSFET is
More informationIN1 GND IN0. Applications
Description Pin Assignments The is a single 3-input positive configurable multiple function gate with a standard push-pull output. The output state is determined by eight patterns of 3-bit input. The user
More information74LVC08A. Description. Pin Assignments. Features. Applications QUADRUPLE 2-INPUT AND GATES 74LVC08A. (Top View) Vcc 4B 4A 4Y 3B 3A 3Y
QUADRUPLE 2-INPUT AND GATES Description Pin Assignments The provides four independent 2-input AND gates. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are
More informationZTL431/ZTL432. Pin Assignments. Description. Features. Applications COST EFFECTIVE ADJUSTABLE PRECISION SHUNT REGULATOR ZTL431/ZTL432
COST EFFECTIVE ADJUSTABLE PRECISION SHUNT REGULATOR Description The ZTL431 and ZTL432 are three terminal adjustable shunt regulators offering excellent temperature stability and output current handling
More informationADC114YUQ. Mechanical Data. Features. Ordering Information (Notes 4 & 5) Marking Information NXX 1Y7 YM NXX YM
NXX YM NPN PRE-BIASED SMALL SIGNAL DUAL SURFACE MOUNT TRANSISTOR Features Mechanical Data Epitaxial Planar Die Construction Built-In Biasing Resistors Totally Lead-Free & Fully RoHS Compliant (Notes &
More informationFeatures. Applications
1.5A ULTRA LOW DROPOUT LINEAR REGULATOR Description The is low dropout three-terminal regulator with a typical dropout of 375mV at 1.5A output current. The provides current limit and thermal shutdown.
More informationGreen. Part Number Case Packaging DMN3013LFG-7 PowerDI (Type D) 1000 / Tape & Reel DMN3013LFG-13 PowerDI (Type D) 3000 / Tape & Reel
YYWW Green 3V SYNCHRONOUS N-CHANNEL ENHANCEMENT MODE MOSFET PowerDI3333-8 (Type D) Product Summary Device BV DSS R DS(ON) Max Q 3V 4.3m @ V GS = 8V, I D = 4A Q2 3V 4.3m @ V GS = 8V, I D = 4A Description
More informationADVANCED INFORMATION
1A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Product Summary V RRM (V) I O (A) V F(MAX) (V) @ +25 C I R(MAX) (µa) @ +25 C 80 1 0.80 5 Description and Applications Features and Benefits Low Forward Voltage
More informationDGD Ordering Information (Note 4) Marking Information YYWW DGD05473 HIGH FREQUENCY HIGH-SIDE AND LOW-SIDE GATE DRIVER IN W-DFN
HIGH FREQUENCY HIGH-SIDE AND LOW-SIDE GATE DRIVER IN W-DFN3030-10 Description The is a high-frequency gate driver capable of driving N- channel MOSFETs. The floating high-side driver is rated up to 50V.
More informationGreen SMC. Top View Bottom View. Part Number Case Packaging B5XXCE-13 SMC 3,000/Tape & Reel
Green 5.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Product Summary B520CE/B530CE/B540CE V RRM (V) I O (A) V F Max (V) I R Max (ma) 20 5.0 0.55 0.2 30 5.0 0.55 0.2 40 5.0 0.55 0.2 Features and Benefits
More informationFeatures. Typical Configuration ZXGD3113W6. Top View Pin-Out
SYNCHRONOUS MOSFET CONTROLLER IN Description The is intended to drive a MOSFET configured as an ideal diode replacement. The device is comprised of a differential amplifier detector stage and high current
More information2.5~5.5V C AH180. Gnd
Features General Description Micropower operation Operation with magnetic field of either north or south pole (omnipolar) 2.5V to 5.5V battery operation Chopper stabilized Superior temperature stability
More informationDGD Features. Description. Mechanical Data. Applications. Ordering Information (Note 4) Marking Information YYWW DGD05463
HIGH FREQUENCY HALF-BRIDGE GATE DRIVER WITH PROGRAMMABLE DEADTIME IN W-DFN3030-10 (Type TH) Description The is a high-frequency half-bridge gate driver capable of driving N-channel MOSFETs in a half-bridge
More informationNOT RECOMMENDED FOR NEW DESIGN - NO ALTERNATE PART
LOW-POWER OFF-LINE PSR LED CONTROLLER Description The is a high performance AC/DC power supply controller for LED lighting application. The device uses Pulse Frequency Modulation (PFM) method to build
More informationFeatures. Top View. Part Number Case Packaging DMN3008SCP10-7 X4-DSN /Tape & Reel
N-CHANNEL ENHANCEMENT MODE FIELD MOSFET Product Summary BV SSS R SS(ON) MAX I S T A = +25 C 30V 7.8mΩ @ V GS =V 14.6A Description This new generation MOSFET has been designed to minimize the on-state resistance
More information(Top View) operation modes for setting the output voltage. Fixed output voltage mode senses the output voltage on V OUT, adjustable output voltage
300mA HIGH SPEED, EXTREMELY LOW NOISE CMOS LDO REGULATOR Description Pin Assignments The is a 300mA, positive Voltage regulator ICs fabricated by CMOS process. The provides two kinds of output voltage
More informationTop View. Part Number Compliance Case Packaging DMN6066SSD-13 Commercial SO-8 2,500/Tape & Reel DMN6066SSDQ-13 Automotive SO-8 2,500/Tape & Reel
60V DUAL N-CHANNEL ENHANCEMENT MODE MOSFET Product Summary Features and Benefits V (BR)DSS 60V R DS(on) T A = +25 C 66mΩ @ = V 4.4A 97mΩ @ = 4.5V 3.6A Low on-resistance Fast switching speed 0% Unclamped
More informationDMN3032LFDB. Features and Benefits. Product Summary. Description and Applications. Mechanical Data. Ordering Information (Note 4) Marking Information
YM DUAL N-CHANNEL ENHANCEMENT MODE MOSFET Product Summary BV DSS 3V R DS(ON) Max I D Max T A = +5 C 3mΩ @ V GS = V 6.A 4mΩ @ V GS = 4.5V 5.A Description and Applications This MOSFET is designed to minimize
More informationFeatures. Top View Pin-Out
40 1A GATE DRIE SOT363 Description is a high-speed, non-inverting single gate driver for switching MOSFETs. It can transfer up to 1A peak source/sink current into the gate for effective charging and discharging
More informationTop View BAT54T BAT54AT BAT54CT BAT54ST
SURFACE MOUNT SCHOTTKY BARRIER DIODE Features Mechanical Data Ultra-Small Surface Mount Package Low Forward Voltage Drop Fast Switching PN Junction Guard Ring for Transient and ESD Protection Totally Lead-Free
More information