Air-supply elements MGE 13.0 5-1 Air-supply elements 1 2 3 4 5 6 7 8 Flanged plate (p. 5-3) Connection piece (p. 5-4) Connection screw fitting -1/4" (p. 5-4) Longitudinal end connector (p. 5-5) 9 11 12 13 Longitudinal end connector 45 Pneu (p. 5-6) T-connector 45 Pneu (p. 5-6) 16 18 19 21
5-2 MGE 13.0 Air-supply elements (p. 2-41) Air-supply elements f Rexroth strut profiles can be used as compressed-air 19584 L L 2N L 3NVS (p. 2-40) 009732 L 7,9 cm 2 lines and reservoirs using the profile hollow chambers or central bores f Flanged plate for end closing of profiles (p. 5-3) f Compressed-air introduction or removal at the flanged plate, connection piece, or connection screw fitting (p. 5-4) f Air-tight profile connections with longitudinal end connectors or T-connectors (p. 5-5, 5-6) f The use of heavy-duty profiles is preferable for increased leaktightness demands (e.g. underwater applications) 8,8 cm 2 19585 009731 (p. 2-41) 9 cm 2 cm 2 9 cm 2 The complete range of Rexroth pneumatic products can be 19586 009733 found at www.boschrexroth.com/pneumatics. 90x90L 90x90L 4N 90x90L 4NVS (p. 2-43) 90x90L 33 cm 2 19587 009730 90x180L (p. 2-45) 90x180L 29 cm 2 29 cm 2 19588 009734
Air-supply elements MGE 13.0 5-3 90x180L (2x 90x90) Flanged plate 1 2 3 f For sealing the ends of hollow chambers to convert profiles into compressed-air lines 4 f For compressed-air introduction or removal when screw plugs are replaced by pneumatic screw fittings f Profile finishing: thread cutting in the central bores 5 6 7 8 9 19924 Nm 25 Nm 2,5 G1/ 2" DIN 7984 x30 Flanged plate FS 3 842 523 097 2x Material: Flanged plate: diecast aluminum Fastening material: steel, galvanized, Incl. fastening material (FS), screw plug, seals 11 12 13 009735 Nm 25 Nm 2,5 G1/ 2" FS2 DIN 7984 x Flanged plate FS 2 3 842 535 721 2xFS2 Material: Flanged plate: aluminum Fastening material: steel, galvanized, Incl. fastening material (FS), 2x spacer, 3x screw plug, seals 16 18 19 009737 90x90 Flanged plate FS 2,5 4x Nm 25 Nm G3/ 4" DIN 7984 x30 90x90 3 842 523 098 4x Material: Flanged plate: diecast aluminum Fastening material: steel, galvanized, Incl. fastening material (FS), 4x spacer, screw plug, seals 21 009736 Note: Only suitable for light profiles 90x90L and 90x180L.
5-4 MGE 13.0 Air-supply elements G3/8" Connection piece Connection screw fitting -1/4" G1/2" Connection piece f For compressed-air introduction or removal at any point along the profile f G3/8" for connection at central hole f G1/2" for connection at hollow chamber f Suitable for light and standard profiles f Profile finishing: blind hole DI9.8; blind hole ø 21 mm (drilling jig 3 842 528 574, p. -3) 826 79 45 34 ø21 ø9,8 Nm G3/ 8" (A, B) M6x16 Connection piece FS G3/8" 3 842 523 092 2x Material: Connection piece: diecast aluminum Incl. fastening material, seals (A, B) Accessories: Seals A, B (p. 5-6) 009744 DI9,8 ø65 45 G1/ 2 Nm 27 M6x16 Connection piece FS G1/2" 3 842 352 085 2x Material: Connection piece: diecast zinc Incl. fastening material, seal (A) Accessories: Seal A (p. 5-6) ø9,8 (A) 009745 DI9,8 25 42 G1/4" Connection screw fitting -1/4" f For screw fitting in central hole f Profile finishing: Nm 18,5 Connection screw fitting -1/4" 3 842 535 719 001959 009746 Material: Connection screw fitting: steel, galvanized, Seal: PVC, hard Incl. seal
Air-supply elements MGE 13.0 5-5 90x90L f Seal for end-to-end connection of profiles carrying compressed air f Profile finishing: through hole D (, ); blind hole LF (90x90L) Required accessories: Longitudinal end connector for profile connection (p. 3-53) 1 2 3 4 5 6 7 8 9 828 D 90 3 842 508 087 Material: Seal: PUR Spacer: PA Seal, 2x spacer 11 12 13 3 842 529 248 45 2,5 009742 009739 D 180 3 842 508 088 Material: Spacer: PA Seal, 2x spacer 16 18 009743 3 842 529 248 009740 45 2,5 19 90x90 LF 90 90x90 3 842 5 5 Material: Spacer: PA Seal, 4x spacer 21 90 2,5 Note: Only suitable for light profile 90x90L. 3 842 529 334 009741 009738
5-6 MGE 13.0 Air-supply elements Longitudinal end connector 45 Pneu T-connector 45 Pneu, seal f Longitudinal end connector 45 Pneu for end face mechanical and pneumatic connections of two 45x45 or 45x45L profiles to convert the central bore into a compressed-air line f T-connector 45 Pneu for mechanical and pneumatic connections of two 45x45 or 45x45L profiles at a 90 angle to convert the central bore into a compressed-air line f Profile finishing: in central bore; blind hole DI9.8; blind hole ø 21 mm (drilling jig 3 842 528 574, p. -3) 827 4x Nm Nm M max = 1 Nm M6x18 FS2 x30 Longitudinal end connector FS 45 Pneu 3 842 523 094 4x, 2xFS2 Material: Longitudinal end connector: diecast aluminum Incl. fastening material, sealing rings 009748 ISO4032 M6 (A, B) 2x Nm Nm M max = 1 Nm FS3 M6x18 T-connector FS 45 Pneu 3 842 523 093 2xFS3 Material: T-connector: diecast aluminum Incl. fastening material, seals (A, B) for standard and light profiles l ø21 ø9,8 DI9,8 009749 f Seal for connection piece and T-connector l Seal l (mm) A For standard profiles 4 3 842 503 242 B For light profiles 7 3 842 523 2 Material: NBR 009747