V5PL50 High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.8 V at I F = 5 A TMBS esmp Series Anode Cathode Anode PRIMARY CHARACTERISTICS I F(AV) 5 A V RRM 50 V I FSM 00 A V F at I F = 5 A () 0.40 V T J max. 50 C Package Diode variation Single die FEATURES Very low profile - typical height of. mm Ideal for automated placement Trench MOS Schottky technology Low forward voltage drop, low power losses High efficiency operation Meets MSL level, per J-STD-00, LF maximum peak of 60 C Material categorization: For definitions of compliance please see www.vishay.com/doc?999 TYPICAL APPLICATIONS For use in low voltage high frequency DC/DC converters, freewheeling, and polarity protection applications. MECHANICAL DATA Case: Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Terminals: Matte tin plated leads, solderable per J-STD-00 and JESD -B0 M3 suffix meets JESD 0 class A whisker test MAXIMUM RATINGS ( unless otherwise noted) PARAMETER SYMBOL V5PL50 UNIT Device marking code 5L5 Maximum repetitive peak reverse voltage V RRM 50 V Maximum average forward rectified current (fig. ) I () F 5 I () F 6.0 A Maximum DC reverse voltage V DC 35 V Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load I FSM 00 A Operating junction and storage temperature range T J, T STG - 40 to + 50 C () Mounted on 30 mm x 30 mm pad areas aluminum PCB () Free air, mounted on recommended copper pad area Revision: 0-Jul-3 Document Number: 87990 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
V5PL50 ELECTRICAL CHARACTERISTICS ( unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL TYP. MAX. UNIT I F = 5.0 A 0.40 - I F = 7.5 A 0.4 - Instantaneous forward voltage I F = 5 A 0.49 0.57 I F = 5.0 A V () F 0.8 - V I F = 7.5 A 0.3 - I F = 5 A 0.40 0.48 Reverse current V R = 35 V 35-0 μa - ma V R = 50 V I () R - 800 μa 35 80 ma () Pulse test: 300 μs pulse width, % duty cycle () Pulse test: Pulse width 5 ms THERMAL CHARACTERISTICS ( unless otherwise noted) PARAMETER SYMBOL V5PL50 UNIT Typical thermal resistance R JA ()() 70 R JM (3) 4 () Free air, mounted on recommended copper pad area; thermal resistance R JA - junction to ambient () The heat generated must be less than the thermal conductivity from junction-to-ambient: dp D /dt J < /R JA (3) Mounted on 30 mm x 30 mm oz. pad PCB; thermal resistance R JM - junction to mount measured at cathode side C/W ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACAGE CODE BASE QUANTITY DELIVERY MODE V5PL50-M3/86A 0.0 86A 500 7" diameter plastic tape and reel V5PL50-M3/87A 0.0 87A 6500 3" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES ( unless otherwise noted) Average Forward Rectified Current (A) 8 6 T M = 4 C, R thjm = 4 C/W 4 0 8 T A = 5 C, R thja = 70 C/W 6 4 T M measured at cathode side 0 0 5 50 75 00 5 50 Mount Temperature ( C) (D = duty cycle = 0.5) Fig. - Maximum Forward Current Derating Curve () Mounted on 30 mm x 30 mm aluminum PCB; T M measured at the terminal of cathode band (R JM = 4 C/W) () Free air, mounted on recommended copper pad area (R JA = 70 C/W) Revision: 0-Jul-3 Document Number: 87990 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
Transient Thermal Impedance ( C/W) www.vishay.com V5PL50 Average Power Loss (W) 8 7 6 5 4 3 D = 0. D = 0. D = 0.3 D = 0.5 D = 0.8 D =.0 Junction Capacitance (pf) 0 000 000 T J = 5 C f =.0 MHz V sig = 50 mv p-p 0 0 4 6 8 0 4 6 8 Average Forward Current (A) Fig. - Forward Power Loss Characteristics 00 0. 0 00 Reverse Voltage (V) Fig. 5 - Typical Junction Capacitance Instantaneous Forward Current (A) 00 T A = 50 C 0 T A = 00 C 0. 0 0. 0. 0.3 0.4 0.5 0.6 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics 00 Junction to Ambient 0 0.0 0. 0 00 t - Pulse Duration (s) Fig. 6 - Typical Transient Thermal Impedance Instantaneous Reverse Current (ma) 000 00 0 0. T A = 50 C T A = 00 C 0.0 0 0 30 40 50 60 70 80 90 00 Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Leakage Characteristics Revision: 0-Jul-3 3 Document Number: 87990 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
V5PL50 PACAGE OUTLINE DIMENSIONS in inches (millimeters) 0.87 (4.75) 0.75 (4.45) 0.06 (0.40) 0.006 (0.5) 0.6 (6.65) 0.50 (6.35) 0.4 (6.5) 0.38 (6.05) 0.7 (4.35) 0.67 (4.5) 0.047 (.0) 0.039 (.00) 0.46 (3.70) 0.34 (3.40) 0.087 (.0) 0.075 (.90) Mounting Pad Layout 0.89 (4.80) 0.89 (4.80) 0.73 (4.40) 0.55 (3.94) NOM. 0.68 (6.80) 0.86 (4.7) 0.030 (0.75) NOM. 0.049 (.4) 0.037 (0.94) 0.050 (.7) 0.084 (.3) NOM. 0.053 (.35) 0.04 (.05) Conform to JEDEC TO-77A 0.04 (.04) 0.055 (.40) Revision: 0-Jul-3 4 Document Number: 87990 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 07 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-7 Document Number: 9000