Schottky Barrier Diode RSX51L-2 Application Dimensions (Unit : mm) Land Size Figure (Unit : mm) General rectification 2. 2.6±.15 2. 5.3±.1.5 9.5±.1 5.5±.5 12±.2 1.75±.1 Features 1) Small power mold type (PMDS) 1 2 4.5±.2 1.2±.3 5.±.3.1±.2 PMDS 2.±.2 2) High reliability Structure 1.5±.2 4.2 Cathode 3) Low V F and low I R Construction Silicon epitaxial planar type ROHM : PMDS JEDEC : SOD-6 1 2 : Manufacture date Taping Dimensions (Unit : mm) 4.±.1 2.±.5 φf1.55 1.55±.5 Anode.3 2.9±.1 4.±.1 φf1.55 Absolute Maximum Ratings (T a = 25 C) Parameter Symbol Conditions Limits Unit Repetitive Peak Reverse Voltage V RM Duty.5 25 V Reverse Voltage V R Direct Reverse Voltage 2 V Average Forward Rectified Current I o Alumina board mounted, 6Hz half sin Wave, Non-repetitive Forward Current Surge Peak I FSM resistive load, T c =9ºCmax. 6Hz half sin wave, one cycle, non-repetitive at T a =25 C 5 A 7 A Operating Junction Temperature T j - 125 C Storage Temperature T stg - -4 to +125 C Electrical Characteristics (T a = 25 C) Parameter Symbol Conditions Min. Typ. Max. Unit Forward Voltage V F I F =3.A - -.39 V Reverse Current I R V R =2V - - 5 ma 2.8MAX 1/5 214.12 - Rev.B
RSX51L-2 FORWARD CURRENT : I F (A) 1.1.1 T j = 75 C T j = 25 C T j = -25 C REVERSE CURRENT : I R (ma) T j = 75 C T j = 25 C.1 5 15 2 25 3 35 4 45 1 T j = -25 C 5 15 2 25 FORWARD VOLTAGE : V F (mv) V F -I F CHARACTERISTICS REVERSE VOLTAGE : V R (V) V R -I R CHARACTERISTICS CAPACITANCE BETWEEN TERMINALS : C t (pf) T j = 25 C f = 1MHz FORWARD VOLTAGE : V F (mv) 365 36 355 35 345 34 335 33 Ave. : 336.1mV I F =3.A n=3pcs 2 3 325 REVERSE VOLTAGE : V R (V) V R -C t CHARACTERISTICS V F DISPERSION MAP 2/5 214.12 - Rev.B
RSX51L-2 REVERSE CURRENT : I R (ma) 5 45 4 35 3 25 2 15 5 Ave. : 227.7mA V R =2V n=3pcs CAPACITANCE BETWEEN TERMINALS : C t (pf) 6 5 4 3 2 99 Ave. : 998pF f=1mhz V R =V n=pcs 98 I R DISPERSION MAP C t DISPERSION MAP PEAK SURGE FORWARD CURRENT : I FSM (A) 4 35 3 25 2 15 I FSM Ave. : 186A 1cyc 8.3ms T a =25 C REVERSE RECOVERY TIME : t rr (ns) 35 3 25 2 15 5 Ave. : 11.6ns I F =.5A I R =1.A I rr / I R =.25 n=pcs 5 I FSM DISPERSION MAP t rr DISPERSION MAP 3/5 214.12 - Rev.B
RSX51L-2 PEAK SURGE FORWARD CURRENT : I FSM (A) I FSM 8.3 ms 1cyc 8.3 ms T a =25 C PEAK SURGE FORWARD CURRENT : I FSM (A) I FSM time 1cyc T a =25 C 1 1 NUMBER OF CYCLES I FSM -CYCLECHARACTERISTICS TIME : t(ms) I FSM -t CHARACTERISTICS 4.5 4. 8. 7. FORWARD POWER DISSIPATION : P F (W) 3.5 3. 2.5 2. 1.5 1. Sin(θ=18) REVERSE POWER DISSIPATION : P R (W) 6. 5. 4. 3. 2. Sin(θ=18).5 1.. 2 4 6 8 AVERAGE RECTIFIED FORWARD CURRENT : I o (A) I o -P F CHARACTERISTICS. 5 15 2 25 REVERSE VOLTAGE : V R (V) V R -P R CHARACTERISTICS 4/5 214.12 - Rev.B
RSX51L-2 TRANSIENT THERMAL IMPEDANCE : R th ( C/W) 1 R th(j-a) R th(j-c) Alumina board(5x5x1mm) mounted IM=mA I F =A time 1ms 3ms.1.1.1.1 1 AVERAGE RECTIFIED FORWARD CURRENT : I o (A) 14 12 8 6 4 2 Sin(θ=18) I O A V V R t T D=t/T V R =V T j =125 C 25 5 75 125 TIME : t(s) R th -t CHARACTERISTICS AMBIENT TEMPERATURE : T a ( C) DERATING CURVE (I o -T a ) AVERAGE RECTIFIED FORWARD CURRENT : I o (A) 14 12 8 6 4 2 Sin(θ=18) I O A V V R t T D=t/T V R =V T j =125 C ELECTROSTATIC DISCHARGE TEST : ESD(kV) 3 25 2 15 5 No break at 3kV No break at 3kV 25 5 75 125 C=2pF R=W C=pF R=1.5kW CASE TEMPERATURE : T c ( C) DERATING CURVE (I o -T c ) ESD DISPERSION MAP 5/5 214.12 - Rev.B
Notice Notes 1) 2) 3) 4) 5) 6) 7) 8) 9) ) 11) 12) 13) The information contained herein is subject to change without notice. Before you use our Products, please contact our sales representative and verify the latest specifications : Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. The Products specified in this document are not designed to be radiation tolerant. For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http:///contact/ R12A