Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted to form a serial system, with boreholes for anchoring or plugging. Bicycle parking rack Frame of angular section oop 19 mm round tube eight: approx. 510 mm Alternating high and low racks Bicycle wheel width up to 55 mm Low rack one side: approx. 500 mm Two-side depth: approx. 600 mm One-sided rack, hot-dip galvanized Space between bicycles 350 mm length approx.kg Part-No. 3 Bicycles 1050 mm 10.0 420.30 5 Bicycles 1750 mm 15.0 420.50 6 Bicycles 2100 mm 18.0 420.60 Two-sided rack, hot-dip galvanized 2 x 3 Bicycles 1050 mm 15.0 420.32 2 x 5 Bicycles 1750 mm 24.0 420.52 2 x 6 Bicycles 2100 mm 27.0 420.62 Bicycle stand with lean-on hoop Frame of angular section oop Ø 19 mm round tube, high and low rack Bicycle wheel width up to 55 mm Lean-on hoop Ø 26.9 mm round tube with reinforced side and eyelet, hoop with plastic coating eight: approx. 850 mm Depth: approx. 950 mm One-sided rack, hot-dip galvanized with lean-on hoop, space between bicycles 350 mm 2 Bicycles 700 mm 15.5 420.20 216 Figure: 2 racks 420.20
Bicycle rack Bicycle rack serial parking Sturdy and weatherproof Parking rack made of Ø 12 mm round steel with welded square tube strut 40 x 40 mm. Vertical tube can be fixed by bolts eight approx. 500 mm above ground, for bicycle wheel width up to 55 mm, hot-dip galvanized approx. 3000 mm approx. 1150 mm 1600 mm approx. Model Stand-alone construction Stand-alone construction all brackets for casting in concrete for plugging down for plugging down Element length 3000 3000 3000 Total length 3100 3100 3100 with vertical tube approx. mm one-side one-side one-side Bicycle positioning straight left or straight left or straight left or 90 right 45 90 right 45 90 right 45 Number of spaces 6 6 6 6 6 6 Spacing mm 500 500 500 500 500 500 Depth of stand approx. mm 2000 1600 2000 1600 2000 1600 approx.kg 20.0 20.0 20.0 20.0 20.0 20.0 Part-No. 421.02 421.03 421.04 421.05 421.16 421.17 217
Bicycle rack Individual stands Stand of Ø 12 mm round steel welded to vertical tube 40 x 40 mm height approx. 500 mm above ground, hot-dip galvanized Individual stand for casting in concrete approx.kg Part-No. one-side parking 3.5 421.51 two-side parking 4.0 421.52 Individual stand for plugging down Plugging plate 100 x 150 mm, 4 holes Ø 10 mm one-side parking 4.0 421.53 two-side parking 4.5 421.54 Individual stand for wall mounting straight positioning 90 3.5 421.55 angled positioning 45 3.5 421.56 Individual stand for casting in concrete, hot-dip galvanized Stand of Ø 20 mm round steel eight approx. 530 mm above ground 4.0 421.60 Lean-on hoop stand for casting in concrete, hot-dip galvanized Steel tube Ø 42 mm Stand opening approx. 100 mm Total width approx. 200 mm Total length approx. 1600 mm Total height approx. 850 mm 10.0 422.01 218
Easy parking of bicycles, theft proof locking, simple installation, high stability Bicycle lean-on hoop Steel tube Ø 60 x 2,5 mm with cross tubes Ø 42 x 2.5 mm total width 800 mm total height 1300 mm approx.kg Part-No. with flat head, for casting in concrete hot-dip galvanized 12.0 422.60 hot-dip galvanized and coated DB 703 12.0 422.60B with ball head, for casting in concrete hot-dip galvanized 12.0 422.61 hot-dip galvanized and coated DB 703 12.0 422.61B Lean-on hoop, for casting in concrete Can be used on both sides vertical steel tubes Ø 60 mm tubular frame Ø 48 mm total length approx. 1425 mm height above ground approx. 900 mm completely welded, hot-dip galvanized 20.0 422.10 Bicycle lean-on rack consists of three lean-on hoops 38.0 422.30 of steel tube Ø 48 mm welded on flat bar 100 x 8 mm, 1800 mm long, with holes for plugging down. Total width approx. 700 mm oop spacing approx. 600 mm eight approx. 700 mm 219
Lean-on hoop of flat bar steel for casting in concrete, hot-dip galvanized and optionally powder-coated in DB 703 Total height approx. 1200 mm Flat bar steel 50 x 12 mm without cross bar hot-dip galvanized hot-dip galvanized and coated DB 703 Total width approx.kg Part-No. Part-No 450 mm 13.0 450.045 450.045B 750 mm 14.5 450.075 450.075B 1000 mm 16.0 450.100 450.100B 450 mm 15.0 451.045 451.045B 750 mm 18.0 451.075 451.075B 1000 mm 20.5 451.100 451.100B Flat bar steel 80 x 12 mm without cross bar 450 mm 21.0 452.045 452.045B 750 mm 23.5 452.075 452.075B 1000 mm 25.5 452.100 452.100B 450 mm 24.0 453.045 453.045B 750 mm 28.5 453.075 453.075B 1000 mm 33.0 453.100 453.100B 220
Lean-on hoop made of steel tube for casting in concrete, hot-dip galvanized or optionally powder-coated in DB 703 total height approx. 1200 mm Square tube 60 x 60 mm without cross bar hot-dip galvanized hot-dip galvanized and coated DB 703 Total width approx.kg Part-No. Part-No 450 mm 12.5 454.045 454.045B 750 mm 14.0 454.075 454.075B 1000 mm 15.0 454.100 454.100B 450 mm 14.5 455.045 455.045B 750 mm 17.5 455.075 455.075B 1000 mm 19.0 455.100 455.100B Square tube 60 x 40 mm without cross bar 450 mm 10.0 456.045 456.045B 750 mm 11.5 456.075 456.075B 1000 mm 12.5 456.100 456.100B 450 mm 12.0 457.045 457.045B 750 mm 14.0 457.075 457.075B 1000 mm 13.0 457.100 457.100B Bicycle lean-on hoops are manufactured to order. Orders cannot be cancelled, hoops cannot be returned. 221
Lean-on hoop made of steel tube for casting in concrete, hot-dip galvanized and optionally powder-coated in DB 703 Total height approx. 1200 mm Square tube 80 x 20 mm without cross bar hot-dip galvanized hot-dip galvanized and coated DB 703 Total width approx.kg Part-No. Part-Nr 450 mm 8.5 458.045 458.045B 750 mm 9.5 458.075 458.075B 1000 mm 10.0 458.100 458.100B 450 mm 10.0 459.045 459.045B 750 mm 11.5 459.075 459.075B 1000 mm 13.0 459.100 459.100B Flat bar steel 80 x 12 mm Lean-on hoop of bent design for casting in concrete, hot-dip galvanized and optionally powder-coated in DB 703 total height approx. 1200 mm without cross bar 750 mm 23.0 4052.075 4052.075B 1000 mm 25.5 4052.100 4052.100B 222
The functional shape of the aesthetic design of this lean-on hoop allows many different uses. Bicycle lean-on hoop Steel tube Ø 48 mm Total width approx. 1400 mm eight above ground approx. 850 mm approx.kg Part-No. for casting in concrete hot-dip galvanized 8.0 422.50 hot-dip galvanized and coated DB 703 8.0 422.50B for plugging down, with base plate Ø 150 mm and three Ø 14 mm holes hot-dip galvanized 8.0 422.51 hot-dip galvanized and coated DB 703 8.0 422.51B Lean-on post with tube ring for plugging down, tube ring outside diameter 300 mm made of steel tube Ø 48 mm, vertical post steel tube Ø 60 mm, with base plate Ø 180 mm and four Ø 12 mm holes. Total height approx. 900 mm hot-dip galvanized and coated DB 703 5.5 422.55PB Lean-on barrier Flat bar steel 50 x 12 mm, hot-dip galvanized and coated DB 703, with 2 cross bars of stainless steel tube Ø 48 mm ground surface, total height: 1200 mm width 450 mm width 750 mm width 1000 mm approx.kg Part-No. approx.kg Part-No. approx.kg Part-No. 13.0 449.045B 14.5 449.075B 15.5 449.100B Bicycle lean-on hoops are manufactured to order. Orders cannot be cancelled, hoops cannot be returned. 223